Devanco Canada - Get The Right Garage Door Opener‎ and Parts

F210B

NICE Adjustable Synchronised Photocells w/Blue BUS Technology Sold as a Pair

Pair of synchronised Photocells with built in transmitter for 8k2 resistive safety edges.
Transmitter is powered by one 3.6 V battery.
Receiver with BUS Connection.
210 degrees horizontal adjustment and 30 degrees vertical.
F210B can only be connected to 'BlueBUS' networks

BEA-10-FALCN-XL

BEA Falcon-XL Motion Detector Mount under 11'5"

Same features as the Falcon detector but made specifically for extra low mounting
Mounting height between 6.5' and 11.5'
Detection zone: 13'x6.5' at 8 1/5'
Allows uni or bi-directional sensing and the unique ability to open a door when traffic is moving away from the sensor.
Sensor also has the ability to differentiate between pedstrians and vehicles.
Available remote makes it easy to make adjustments to all key parameters of the sensor while at ground level.

.......more details

Installation manual Manuel d'installation Sell sheet Cut sheet

50150

Doorlec Electro-Mechanical Safety Edge and Weatherstrip Sold per Foot

For the protection of vehicles doors and safety of people.
Any upward-acting door may be fitted at the leading edge with an electro-mechanical safety weatherstrip.
This mechanism consists of a formed galvanized steel section covered with vinyl impregnated rubber hinged along the full width of the leading door edge.
Can be adjusted to approximately 2½" (63.5mm) to form a tight weather seal.
The hinge linkage is arranged that minimum pressure is required to activate the electrical control switch causing door to reverse direction of travel to the fully open position.
Reverse switch is enclosed in a galvanized housing with a sliding plunger to assure positive actuation every time.

.......more details

LMRRUL

LiftMaster Monitored Retro Reflective Photo Eye w/Heater 2018 UL325

Features integrated diagnostics with our 2018 UL® 325 Gate Operators.
Versatile Solution for entrapment protection.
Long-Range Sensing Distance of up to 50 ft. (LMRRUL)
Built-In Heater for dependable performance in most environments.
Increased Beam Angle for simple reliable alignment.
Versatile Gimble Bracket for fine alignment and adjustability.

.......more details

Installation manual Manuel d'installation Sell sheet

CP-LX600

Lynx Thru Beam Photocell N1 - Replaced by FR-1000 Fraba

Used on the UL325 operators

DW-TR-200

Fraba Wireless Air Wave Switch Transmitter Only

Includes transmitter DWTR-200 433 Mhz only
A small radio transmitter and the pneumatic switch are packaged within the DW3S-200 case does not come with copper end
Comes with battery (CR2)

Operating Instructions

LZR-H100

BEA LZR Gold-Black BLK-02 H100

Laser scanner for gate and barrier applications.
Provides four laser-based curtains offering a three dimensional detection zone.
Detection curtains are highly configurable and can be set up for activation and presence detection in vehicle sensing applications.
Effective alternative to induction loops.
Max detection range: 32'x32'
Cable length: 33'

.......more details

LZR-H100 User Guide (EN)LZR-H100 Cut Sheet (EN)LZR-H100 User Guide (FR)LZR-H100 Cut Sheet (FR)

E3K-2018

Omron Retro-Reflective Photocell w/Built-In 10K Resistor UL325-2018 *Same as model E3K-R10K4-NR-1

Fully complies with UL325-2018 standard for gate ops. that use the 10K resistor method and also the Normally Closed method
Easy to wire terminal strip
Plug-in replaceable outputs
Range: 40ft
Power: 24-240V AC/DC
The E3K-2018 has a second relay to accommodate traditional dry contact for non-monitored applications.

.......more details

Wiring Diagrams Sell sheet

LOOPDETLM

Liftmaster Plug-in Loop Detector for Liftmaster gate operators

Plug-in Loop detector for CSW24V CSL24V AND LA500
Includes diagnostic and test feature
12VDC/3mA power draw
For exit interrupt or shadow loop applications
Activates only when a vehicle passes over a loop
8 sensitivity levels plus boost to ensure that vehicles are easily identified

.......more details

Installation Manual

60-2728

AB 42GRU-9001 Retro-Reflective Photocell Exterior

Voltage: 12VDC/24VAC/DC
Sensing Distance: 30 Feet
Comes with Bracket and Reflector
NEMA 3 4 4X 6P 12 & 13
Allen Bradley

DWGK11

Bircher Air-Wave Switch DW40 with N4 Enclosure

Bircher pressure wave switch with connection terminals
6.3mm plug tab in impact-resistant plastic housing
For pressure wave switch series D1 grey housing bottom.
A pressure wave generated by pressing the sensing edge reaches the pressure wave switch.
The membrane deflects and the electric contact switches.
The electric contact remains switched as long as the input pressure is above the response pressure.

.......more details

Manual

LMWEKITU

LiftMaster Wireless Edge Kit Monitored

Meets 2016 UL 325 requirements
low-energy Bluetooth® transmission up to 130 ft. range
Integrated Diagnostics with Gate Operator Speed Installation
Protects up to 8 entrapment points
Receiver accepts up to 4 transmitters
Transmitter accepts up to 2 wired resistive edges

.......more details

Installation manual Manuel d'installation Instruction manual Manuel d'instructions Product Guide Guide de produit

BPE-50

EMX Industries Battery Powered Through-Beam Photocells EMX-1500-1

Thru beam configuration
90° adjustment left or right
The transmitter and receiver use 12-24 VDC/AC but the BPE-50 can also be powered by two 3.6-volt lithium batteries (Batteries Included)
50 ft. operating range
Size: 4.4" (112mm) x 2.05" (52mm) x 1.3" (33mm)

50-104-2

LiftMaster Orange Coil Cord 3-Wire 18-ga 20 ft. Extended Curly Cord

MK-00649

Micanan UL325 Monitored N1 Thru-Beam Photocell

50-CP4

LiftMaster Sensing Probe Free Exit 100ft Lead

Self-contained free exit system designed to detect moving vehicle and open your automatic gate.
Can be installed above or below ground
Connects directly to any gate operator without an external output board.
Works with powered or solar gates.
SPECIFICATIONS: Cable Lead Length: 100 ft.
Power Requirements: 8-24 VAC oe 8-30 CSX

.......more details

Installation Manual

BEA-10-WBA

BEA Universal Mounting Bracket

Extendable from 15.35" - 23.62"
-90 to 90 degree tilt range
Self Drilling screws provided
Carbon Steel Black Powder Coated

Installation Guide

BEA-10-FALCON

BEA Falcon Motion Detector Mount over 11'5"

Motion sensor with microwave activationsolution for industrial indoor and outdoor use.
Ideal for automatic industrial doors vehicle gates and detection and loading docks.
Sensor also has the ability to differentiate between pedstrians and vehicles
Can be set vertically from 0 to 180 degrees
Mounting height between 11.5' and 23'
12/24V AC/DC

.......more details