Devanco Canada - Get The Right Garage Door Opener‎ and Parts

MVP-WKE

Allstar Wireless Keypad 110927 318 MHz *** NLA

Compatible with all MVP receivers and operators
4-digit access code
Backlit keys
Operate LED
Power: 9-volt battery
Codes: 19683
RF frequency: 318 MHz
Dimensions: 2.5" W x 6.125" H x 1.5" D Order number: 190-110927

Programming Instructions

ACT-34B

Linear 4-Channel Block Coded MegaCode Key Ring Transmitter 318 MHz

Compatible with all Linear access receivers and controllers
Supplied with quick-disconnect key ring
Power: Two CR2016 batteries incl.
Codes: Factory block coded in MegaCode format
RF frequency: 318 MHz
Dimensions: 1.25" W x 2.25" H x .48" D

.......more details

Programming Instructions

MDR

Linear 1-Channel MegaCode Receiver 318 MHz *** Discontinued

Activates one device
Wire lead antenna
Mounting bracket supplied
Memory: storage for up to 10 MegaCode transmitters
Power: 24 VAC/VDC
Codes: 1000000+ (MegaCode format)

.......more details

Programming Instructions

639T

Allstar 3-btn 9-Door O/C/S Transmitter 107476 318 MHz ***Replaced by P-639T

Open/Close/Stop remote for 9 doors
Compatible with 3-channel Allstar and MVP receivers
Stationary mounting
Easy access to battery and coding switch
Power: 9-volt battery
Codes: 6561 (set by eight trinary dip switches)

.......more details

Programming Instructions

HAR-11

EMX Wiring Harness 11-Pin for D-TEK-MVP 5111-1

Universal 11-pin harness

220499

Linear Drive Sprocket - Belt (HBT)

HAE00022

Linear Inner Slide Assembly - Belt (HBT)

HAE00023

Linear 7ft Belt & Inner Slide Assembly (HBT7)

220205-02

Linear Complete Hardware Kit for LDO LSO LCO

Includes all the hardware needed to install the operator in its entirety.
Includes the rail hardware (door bracket and header bracket) and hardware for installing the safety beams.

232168

Capacitor 3/4 HP 220V 65 MFD

For LCO75 only

218014-02

Lamp Socket Assembly

For models LSO LCO LDO

219109

Capacitor 1/3 HP 43-53 MFD 250V

For LDO33 only

7953

Whiting Truck Door Hinge Gasket White

1001-14-GREY

Commercial Side & Top Weather-Strip 14' Long - Grey

Aluminum retainer with grey dual-fin vinyl
Sold by full case quantity (10)

4005-16FT

Aluminum Retainer only for Heavy Brush 16' Long 180 degree

For angle application (180 degree)
For use with Heavy Brush

4002-12FT

45 Degree Aluminum Retainer for Light Brush 12' Long 45 degree

For angle application (45 degree)
For use with Light Brush or Vinyl Insert.

1003-5"-YELLOW

Bottom U-Rubber 5" Yellow 150' Long

5" yellow vinyl insert 150ft spool.

1003-4"-YELLOW

Bottom U-Rubber 4" Yellow 200' Long

4" yellow vinyl insert 200ft spool.

1003-3"-YELLOW

Bottom U-Rubber 3" Yellow 200' Long

3" yellow vinyl insert 200ft spool.

1009-1-3/4"

Bottom Nail-On for Wood Door Heavy Duty per foot

For 1-3/4" commercial doors.
Color: Black

1009-1-3/8"

Bottom Nail-On for Wood Door Heavy Duty per foot

For 1-3/8" commercial doors.
For heavier applications than the 1009-1-3/4".
Provides a better cushion.
Color: Black

1019-1-3/8-12'

Rigid Vinyl Bottom Retainer Flat 12' Long

Black - for door thickness of 1-3/8"

1014-1-5/8-14'

Rigid Vinyl Bottom Retainer Notched 14' Long

Black - for door thickness of 1-5/8"

1014-1-5/8-10'

Rigid Vinyl Bottom Retainer Notched 10' Long

Black - for door thickness of 1-5/8"

1015-1-3/4-10'

Rigid Vinyl Bottom Retainer Raised Centre 10' Long

Black - for door thickness of 1-3/4"

1015-1-3/4-12'

Rigid Vinyl Bottom Retainer Raised Centre 12' Long

Black - for door thickness of 1-3/4"

1007-1-5/8-16'

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick**Actual Length 16'2"

For door thickness of 1-5/8" to 1-3/4"

1006-2-14'

Rigid Vinyl Bottom Retainer U-Shaped 14' Long

Black with flexible fin to touch door face.
For door thickness 2"

1006-1-3/4-14'

Rigid Vinyl Bottom Retainer U-Shaped 14' Long

Black with flexible fin to touch door face.
For door thickness 1-3/4"

1006-1-1/2-24'

Rigid Vinyl Bottom Retainer U-Shaped 24' Long

Black with flexible fin to touch door face.
For door thickness 1-1/2"

1006-1-1/2-14'

Rigid Vinyl Bottom Retainer U-Shaped 14' Long

Black with flexible fin to touch door face.
For door thickness 1-1/2"

1006-1-1/2-8'

Rigid Vinyl Bottom Retainer U-Shaped 8' Long

Black with flexible fin to touch door face.
For door thickness 1-1/2"

1003-2-14'

Aluminum Bottom Retainer L-Shaped 14' Long

For 2" thick doors.

1003-1-5/8-24'

Aluminum Bottom Retainer L-Shaped

For 1-5/8" thick doors.
DIE # ES18010

1003-1-3/8-12'

Aluminum Bottom Retainer L-Shaped

For 1-3/8" thick doors.

7001-12-BROWN

Commercial Side & Top Weather-Strip 12' Long - Brown (DN)

Brown galvanized steel with brown dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

1104-18FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 18' Long - Black (B)

Black rigid vinyl retainer with black flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Full case quantity only (12).

1104-12FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 12' Long - Black (B)

Black rigid vinyl retainer with black flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-9FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 9' Long - Black (B)

Black rigid vinyl retainer with black flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-12FT-DK-BN

Residential Side & Top PVC Weather-Strip with cap 12' Long - Commercial Brown (DN)

Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-16FT-BROWN

Residential Side & Top PVC Weather-Strip with cap 16' Long - Brown (N)

Brown rigid vinyl retainer with brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-9FT-BROWN

Residential Side & Top PVC Weather-Strip with cap 9' Long - Brown (N)

Brown rigid vinyl retainer with brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

RP-3002

Rubber Plug 1/2"

To plug end of 3002 gum hose

18-RWB-PAIR

Winding Bars Round 18" Set of 2

Cold rolled hardened steel.
Machined to 7/16" at one end with 1/2" outside dia. on the other.
Sold as a pair.

24-RWB-PAIR

Winding Bars Round 24" Set of 2

Cold rolled hardened steel.
Machined to 1/2" at one end with 5/8" outside dia. on the other.
Sold as a pair.

7001-12-WHITE

Commercial Side & Top Weather-Strip 12' Long - White (W)

White galvanized steel with white dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

7001-10-WHITE

Commercial Side & Top Weather-Strip 10' Long - White (W)

White galvanized steel with white dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

1001-24-BLACK

Commercial Side & Top Weather-Strip 24' Long - Black

Aluminum retainer with black dual-fin vinyl

32-48-200

Extension Spring 8' Door - 200 lbs Tan ** Replaced by 27-48-200

Double - Loop
32" long 48" stretch 200 lb load
Springs sold individually

Spec Sheet

32-48-180

Extension Spring 8' Door - 180 lbs Gold ** Replaced by 27-48-180

Double - Loop
32" long 48" stretch 180 lb load
Springs sold individually

Spec Sheet

32-48-120

Extension Spring 8' Door - 120 lbs Green *** Replaced by 27-48-120

Double - Loop
32" long 48" stretch 120 lb load
Springs sold individually

Spec Sheet

25-42-220

Extension Spring 7' Door - 220 lbs Green w/ clip

Double - Loop
25" long 42" stretch 220 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

25-42-70

Extension Spring 7' Door - 70 lbs Orange

Double - Loop
25" long 42" stretch 70 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

95-00116

Truck Door Rivet 1-1/4" Stainless Steel ** To Extent of Inventoy

Stainless steel construction
Round head design
Cross Reference: T #89217-0040

94-00105

Truck Door Cotter Pin 3/32" x 1-1/4"

Zinc plated
Cross Reference: T #80401-316 W #10-1009-5 120000

94-00002

Truck Door Clevis Pin 1/4" x 7/8"

Zinc Plated finish
1/4" x 7/8"

91-00400

Truck Door Step Bolt 1/4"-20 x 1.25" (3/4" head)- Sold Per Piece

Zinc plated finish
Cross Reference: T #80015-1610 120250

28-32081

Truck Door 2" Horizontal Track with 8" Radius 120" Roadside (LH) for Whiting Roll-Up Doors

SPECS: Length: 120" Fits door sizes: Greater than 96" high
Cross Reference: W #11-3
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints
8" radius
For use with 2" diameter steel or nylon rollers

.......more details

28-02090

Truck Door 2" Vert. Track and Right Angle Assembly 96.5" Roadside (LH) for Whiting Roll-Up Doors

SPECS: Length: 96.5" Fits door sizes: 72" - 90" high
Assembly includes: Right angle mounting track Vertical track and Torsion bracket
Cross Reference: W #2275-2
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints

27-24403

Truck Door Dual Torsion Spring Assembly 93/35 for Whiting Roll-Up Doors

Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
Springs are treated with rust preventative
Roadside cable drum is color coded RED
Specs: Shaft Length: 93" Spring Length: 35" Wire diameter: .187 Winding cone color: White

27-20401

Truck Door Bracket for Torsion Assembly Curbside (RH) for Todco Roll-Up Doors

Steel construction
Zinc plated finish
Cross Reference: T #51036-1 W #4029 360100

27-20305

Truck Door Balancer Bracket Center for Whiting Roll-Up Doors

Steel construction
Plain finish
Cross Reference: W #2525

26-94522

Truck Door Intermediate Panel (12" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

26-94322

Truck Door Bottom Panel with Seal (12" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
Comes only with bottom retainer and seal (installed)

26-94323

Truck Door Bottom Panel with Seal (13" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
Comes only with bottom retainer and seal (installed)

26-40202

Truck Door Head Seal Retainer Only 96" Long for Roll-Up Doors

Retainer extrusion is constructed of high quality aluminum.
Panel mounted retainer
Cross Reference: T #69790 500000

26-40037

Truck Door Offset U-Channel Seal Retainer 96" Long for Whiting DryFreight Doors *** To extent of inventory

Aluminum extrusion construction.
Retainer is offset to allow header clearence with seal when door is in open position.
For use with offset bottom seal #26-40040
Cross Reference: W #8280

26-40026

Truck Door U-Channel Seal Retainer 96" Long for Whiting DryFreight Doors *** DISCONTINUED

Aluminum extrusion construction
Cross Reference: W #1801

26-14522

Truck Door Intermediate Panel (12" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

25E10002

Truck Door End Hinge & Roller Cover Black E-coat finish for Whiting Roll-Up Doors

Steel construction Black E-coat finish
Removable cover allows roller change without hinge removal
Cross Reference: W #1209 T #70162
Box quantity: 50

Z9955

Spring Gauge

Ruler style spring gauge
Stainless steel
Confirms spring ID & wire size
Place formed end between 2 coils count 20 coils to obtain wire size

R5115

Bearing 1" Commercial with Flanged Retainer Football Style

1" Commercial bearing pressed in a Flanged Retainer Football Style
Type: Steel Bore: 1"
Inner Race Offest: 13/64"
Rated Load Cycles: 250 lb @ 10000 cycles (8')

HD8460-138

T-Handle Cable Lock System 1-3/8" ***Use HD8460-200 instead***

Complete cable locking system for 1-3/8" door.
System Includes: Auto Latch Striker Keeper T-Handle keyed with 4" shaft Inside Release Handle 3/32" cable and all required hardware.

DM28VL-125

Cable Drum Vertical Lift 28' 1350-28 (1-1/4") Pair

28' Vertical Lift aluminum die cast alloy for 1-1/4" shaft.
3/8"-16 x2" hardened cup point set screws installed with red heads. -
Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH.
Max. Door Height: 28'-1".
Rated Lift per Drum: 1100 lbs.
Max. Cable Diameter: 1/4".

.......more details

SF200

Spring Fitting 2" Pair

Unviversal thread for use in either LH or RH wound springs.
Pair includes: (1) winding and (1) stationary.
Maximum wire size diameter: .3065".
Set screw installed: 3/8"-16 x 1" (2).
Mounting: 1" tube or solid shaft
Winding bar hole 1/2"

.......more details

SF175

Spring Fitting 1-3/4" Pair

Universal thread for use in either LH or RH wound springs.
A pair includes: (1) winding and (1) stationary.
Maximum wire size diameter: .2950".
Set screw installed: 3/8"-16 x 1" (2)
Fits 1" shaft
Winding bar hole 1/2"

.......more details

H11G09

Hinge #9 x 11 gauge

11 gauge # 9 hinge - 0.90 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

H11G02

Hinge #2 x 11 gauge

11 gauge # 2 hinge - 0.69 lbs
Bright zinc-plated
For use with 7/16" stem rollers

H11G01

Hinge #1 x 11 gauge

11 gauge hinge #1 - 0.61 lbs
Bright zinc-plated
For use with 7/16" stem rollers
Item code # 224185

CB5320500

Cable 5/32" 7x19 500' Galvanized

Galvanized cable 5/32" 7x19 500ft spool.
Cable break strength: 2800 lbs

Comparison charts

RS1039

Roller 3" Steel 9" stem 10 ball - To Extent of Inventory. Replaced by RS1039-C

Steel Roller Wheel diameter: 3"
Working length: 8.5"
Overall length: 9.64"
Box qty: 60 Box weight: 49.6 lbs (3-9-10 Steel)

RS1037

Roller 3" Steel 7" stem 10 ball

Steel Roller Wheel diameter: 3"
Working length: 6.5"
Overall length: 7.75"
Box qty: 75 Box weight: 34.2 lbs (3-7-10 Steel)

RS1024

Roller 2" Steel 4" stem 10 ball

Steel Roller Wheel Diameter: 2"
Working Length: 3.5" Overall Length: 4.5"
Box qty: 150 Box weight: 53.3 lbs (2-4-10 steel)

R5200

Pulley 3" HD Yellow Zinc Plated Steel 200lb Max

Bored for 3/8" diameter bolt
Maximum cable diameter: 1/8"
Riveted with Ball Bearing

S-HOOK_LARGE

S Hook 1/4" x 2" Large

HD3080

Step Lift Plate Curled

Step Plate/Lift Handle

903021ORBG

Operator Reinforced Bracket 21" Galvanized

Comes with clevis and clip pins. 24 per carton

HD3130

End Stile Latch 7-1/2" Lockbar Length

Lockbar Length: 7-1/2"
Throw: 2-1/8" Use with: Lockbar or End Stile
Centerline Distance (key spindle to handle shaft): 2-3/4".
Handle in Bright Chrome Finish Latch in Bright Zinc Plated steel.

25-10300

Truck Door Cable Anchor Bracket Zinc

Steel construction Zinc plated finish
Allows proper rotation of cable head
Cross Reference: T #61204 W #4004 240000

25-10103

Truck Door 2" Sealed Roller Steel for Whiting Roll-Up Doors

Zinc plated finish 10 roller ball design
Shaft Length: 2.62" Overall Length: 3.41"

K20-1050C-2P

LiftMaster Electric Motor 1/2 HP Nema 1

6X16PO50

Devanco Loop 6' x 16' pave-over 50' lead-in

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

2'6X6PO50

Devanco Loop 2'6 x 6' pave-over 50' lead-in

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

6X12PO50

Devanco Loop 6' x 12' pave-over 50' lead-in

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

4X6PO50

Devanco Loop 4' x 6' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

OGH-6533-ECB

Manaras 3/4 HP 600V 3Ph Gear Head Operator with Elect. Circuit Board

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details