Devanco Canada - Get The Right Garage Door Opener‎ and Parts

4580-304-BRONZE

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Bronze (Commercial Brown) 458-47 *** To Extent of Inventory

304ml cartridge
Ideal for movement and perimeters joints
Meets ASTM C920 S NS Class 50 NT M GA O
Meets AAMA 802 and 805 standards
Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
Excellent resistance to UVs for indoor and outdoor use
Non-corrosive
Low VOC and compatible with sealed units
Cannot be painted

PUSH149

Manaras Contact Block NC TELE.

Same as ZENL1121

SHAFT104

Manaras Clutch (Input) Shaft for Opera H

ALUM-322

Aluminum 24" x 100' Spool Red # 322

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 322
Reverse side is #431 Bright White

Colour chart

BOARD003

Manaras Repl. Circuit Board MA-50 110V Lite Duty

Used on model MDTB

MOD065B

Manaras Trolley Hoist #41 Brake Release Kit Includes 12' Shaft

Chain hoist for manual hand operation of standard lift doors equipped with trolley operators.
The 1" cross-header shaft (12' long) drives the front idler of the drawbar
For use with operators with #41 chain
When applicable it incorporates an electric cut-out and brake release cable
Hand chain for 14' high door is standard
Hoist assembly width is only 8.5"

.......more details

33356A

Genie Opto-Luctor Wheel

106-0006

Rodent Block Pull Chain Seal 2.5"

Often overlooked and left unprotected the opening for the pull chain on dock levelers is an ideal entry point for mice and rats.
The chain provides a built-in ladder for pests and the chain opening is more than big enough for rats or mice to squeeze through.
Features solid cast aluminum construction easy to install and completely cover the chain opening.
The seals are designed to sit completely below the surface of the dock plate and will not interfere with material handling equipment.

41A2818

LiftMaster Limit Switch Drive Gear Kit

For use with various LiftMaster® and Chamberlain® Residential Garage Door Openers.
Complete replacement kit includes: helical gear e-clip and grease tube

MK-00806

Micanan Heater Probe in Control / Limit Box 24V 20W 2" long Field Install

LMPC2-ST

LiftMaster HID ProxCard II 1326 26 Bit Clamshell Card Price Per Card

HID 26 Bit Format
125 kHz
Sold in Lots of 100 - Price Shown is Price per Card
Only compatible with PPLX in stand-alone mode
Please supply Start # and Facility Code # when ordering
Dimensions: 2.135" x 3.385" x 0.075" MAX. (5.4 x 8.6 x 0.19 cm)

.......more details

LMLEVPACK-OB

LiftMaster Yale Smart Keypad Lever Oil Rubber Bronze Finish Incudes 821LMC *** No Longer Available

Smartphone Control – Pair with included Lock Wi-Fi® Bridge to securely lock unlock and view door activity in the myQ® App.
Illuminated Keypad: Easily enter your code using the backlit keypad.
Brings Keyless entry to doors with no deadbolt
Key Free – No key hole means no lock picking or keys to lose.
9V Battery Back-Up – Never worry about getting locked out due to dead batteries.
Works with Key by Amazon to provide a seamless delivery experience.

.......more details

Programming instructions Sell sheet

15-10885

LiftMaster Dual Sprocket 48B10/41A24

Also known as: G1510855 156016 G156016 15-10885 15-6016 71156016

BEARING051

Manaras Flange 2-Bolt Flange Bearing ID 5/8" Black

2 set screw holes 1/4-28 at 90 degree NO Set Screws provided
The original set screws are to be re-used

PUSH148

Manaras Contact Block NO

Same as ZEN-L 1111

11-10014

LiftMaster Clutch Shaft

Commercial door opener clutch shaft
11 7/8" Long; 1/2" Wide

K21-38158

LiftMaster Current Sense Harness Kit 3PH L5

This is a Current Sense Harness (230/460/575V) Replacement Kit.
Compatible with various LiftMaster® 3 Phase Logic 5.0 Commercial Door Operators; manufactured after February 2016.
Complete replacement kit includes: (2) current sense harnesses of different lengths to accommodate all models.
Models manufactured before February 2016 DO NOT feature current sense technology.
We highly recommend replacing the existing boards with an updated Logic 5.0 system that utilizes current sense technology
Refer to the following replacement boards for compatible upgrades: K001D8395 1PH/3PH Logic Board for all L5 models K001D8397 3PH/L5 Power Board 230/460V

.......more details

LIMIT024A

Manaras Double Snap-Action Limit Switch 2xSPDT 46 degree

4004-10FT

Aluminum Retainer only for Heavy Brush 10' Long 45 degree ** To extent of inventory

For angle application (45 degree)
For use with Heavy Brush

109904

Amarr Snap Latch Supply Bag for 2" Thick Doors

Is needed when 105380: T-Handle Lock Kit for 2" thick doors is order or the lock won't work.

10.1003.150

Whiting Step Bolt Stainless Steel 1-3/8"

MV00210

Micanan Banner Reflector 3"

Compatible with Banner #MV-00300 reflective photocell

ME00018

Micanan Keyway 3/16 SQ x 1-1/4" Long

7001-12-ANODIZED

Commercial Side & Top Weather-Strip 12' Long - Anodized 7001-AB

Anodized galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

7001-9-ANODIZED

Commercial Side & Top Weather-Strip 9' Long - Anodized 7001-AB

Anodized galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

K76-36681

Liftmaster Replacement Antenna for STAR1000

This is an antenna replacement kit for the PPWR & STAR 1000

0/7140/499

Automatic Systems Frequency Drive ATV 12 0.37KW 120V

Frequency drive for AS1620
Only available for G2

7206

Whiting Balancer Bracket End - Curbside for Whiting Roll-Up Doors for #7176 Balancer

Steel construction
Plain finish
Whiting original

CP-ST3-WP

Lynx Button Station 3WP English

SPR41B36X11/4

Sprocket 41B36 x 1-1/4" Bore 1/4" Keyway

Same as MD-00322

J753L5

LiftMaster Industrial-Duty Jackshaft 3/4 HP 575V 3Ph L5

Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
J operators are attached to the door jackshaft to indirectly drive the door
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0® safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you

ME112-C3

Miller Edge L-Shaped PVC Mounting Channel Sold by the Foot

H6NA12

Richards-Wilcox Hinge 6NA x 12 Gauge Roller Bracket

Galvanized 12 gauge hinge

ME120-BLK-2WIRE-L

Miller Edge Black 2-Wire NM Left Hand Outlet Sold per Foot

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

111502.0002

Overhead Electric Motor RHX 3/4hp 115V Single Phase

950-189

Richards-Wilcox 2" or 3" Single Bottom Cable Bracket Right Hand

R125USB

Erone Card Enrolment Unit

Simply present the badge in front of the unit and the code is transmitted into the PC in the cardholder file.
The R125USB is used to quickly add cards to the system.
USB communication port connection

Wireless System Chart

J505L5

LiftMaster Industrial-Duty Jackshaft 1/2 HP 575V 3Ph L5 ***Discontinued

Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
J operators are attached to the door jackshaft to indirectly drive the door
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0® safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you

0/7530/249

Automatic Systems 5/8 Left Hand Rod End with Zerk

Used on the BL229 gate op.

SF514-S

Spring Fitting 5-1/4" Stationary Side Only for 1" & 1-1/4" shaft

Can be used with either 1" or 1-1/4" winding cones
Includes: (1) stationary side only.
2 x 3/8-16 thread holes at CC=4.25"

MIRCU-02

Miller Edge Universal Non-Monitored Interface

Converts a monitored pulsed signal to a non-monitored normally open signal
Creates a Fail Safe signal; reports a fault when power is lost
Ideal for use with pre-2010 commercial door operators

Installation instructions Sell sheet

4JW-LEFT

Rolling Steel 3" Curved Cast Windlock 273002 LH

Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
A wind lock is a small metal device that is attached to each slat.
Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
With a windlock your door can operate efficiently despite wind load or pressure.
Windlocks are easy to add on to any existing rolling steel or shutter door

.......more details

H14G04-BLACK

Hinge #4 x 14 gauge Black Powder Coated

Black powder coated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 2-3/4" wide
Individually wrapped

GBUP312EF-1

Gate Roller 3-1/2" x 2-3/8" Polymer Sold Individually

Polymer gate roller with bracket for 3-1/2" upright post
Works with gate pipes that are 2-3/8" thick or less

WLMODULE002

Manaras Univ. Aux Output Module BOARD070

2510-527

Linear Motor Drive Inverter Assy 2HP 230V 3P

For model VS-GSLG-723

7M-NICE-BAR-ASBY

NICE Replacement Bar Assembly for M7BAR Barrier Gate

Bar assembly comes with:
(1)XBA15 -- 3M BAR
(1)XBA14 -- 4M BAR
(1)XBA9 -- EXPANSION JOINT FOR CONNECTING BARS
(2)XBA13 -- RUBBER IMPACT PROTECTION STRIP
(2) WA10 -- RED ADHESIVE REFLECTIVE STRIPS

.......more details

41A7618

LiftMaster End Panel with Battery Cover and Light Socket 8550W

2807.162.180

Whiting .162 x 2-3/16 x 18" Curbside with Cones

30001

Doorlec Brake Solenoid 575V with wire leads

1004-2-14'

Aluminum Bottom Retainer 2" U-Shape with Reinforcement 14 ft***Actual Length 14'2"***

For door thickness 2"

JA383

FAAC Sprint 383 Board 115V

31355

Doorlec Sprocket 80B14

CP-BRK-WALL

Lynx Wall Bracket Commercial Operators

CAM017

Manaras Synthetic Disconnect Cam Opera

DOC-6000

Atlas Door Operator Board

The Atlas board has been discontinued the Lynx 6000 is a direct replaceement

K72-12591

LiftMaster Clutch Shaft Kit HMJ

L-14-50-0-D

Cable Tie Standard 50 LB Black 14" Nylon 500/pkg

Ultraviolet Resistant
Length: 14.56" / Width: .180" / Thickness: .052" / Diameter: 4.125"
Low insertion and pull through force
Advanced pawl and teeth design
Angled tail provides quicker initial insertion alignment
Tail finger grips allow easier handling and tightening

.......more details

INTERFACE001

Manaras Interface module Compatible w/PHOTO062

Enables the connection of monitored photoelectric cells to a Board or Electromechanical control without monitoring function

MICANAN-H/CHAIN

Micanan Charge for Hand Chain on Doors Over 16'

Up-charge only

71-909210MD

LiftMaster Field Mod. Dual Aux. Limit Switch

SL595101UL

LiftMaster Dual Voltage Slide Gate Op.1 HP 115/208/230V 1 Phase - Heater NOT Incl. Reflective photocell LMRRUL included****NLA

Power: 115/208/230 VAC. Single Phase.
Accessory power: 24VAC 500mA max.
Monitored safety inputs: 3 Main Board 3 Expansion Board.
Temperature specs: Without Heater: -4°F (-20°C) to 140°F (60°C). With optional heater (HTRNB: HTR460 for 460V operators): -40°F (-40°C) to 140°F (60°C)
Gate travel speed: 12 in. per second.
Security+2.0® on-board radio receiver: Up to 50 remote controls (unlimited with 811LM/813LM).

.......more details

Installation manual Manuel d'installation First step for installation Première étape pour l'installation Sell sheet Wiring diagram Wiring diagram 575V

K76-34697

LiftMaster APS Encoder 24V

For use with various LiftMaster® Commercial Slide and Overhead Gate Operators

PS12D2A

LiftMaster Passport Power Supply Plug-In 12VDC 2A (02A1699-1/ ST122A)

Same as #002A1699-1

RL44-40

Direct Burial Loop 6' x 16' Loop with 40' Lead-In

Used for installations under concrete asphalt pavers or in gravel roads.
The loop can be tied directly to the rebar before concrete is poured.
Wire is designed for a direct burial application.

10-12360

LiftMaster Universal Hood Angle Mounting Bracket 10-12360M1

Heavy gauge steel bracket for vertical or horizontal mount on either front or top of coil on a rolling door.
Has a variety of mounting hole patterns compatible with many OEM manufactures
For use with J H DJ DH
May be welded

050DCTWFLK

LiftMaster Receiver Logic Board DC. WiFi Lock Capable Sec+ 2.0 ***replaced by 050DCTBFLK***

This is 315MHz Security+ 2.0® Lock Capable Receiver Logic Board featuring Wi-Fi® and powered by myQ®.
For use with various LiftMaster® DC Chain or Belt Drive Garage Door Opener models; manufactured after 2017 only.
The unit will feature a yellow learn button and two lock terminals

29150

Doorlec Transformer 600Vpr 120V sec. 50VA

SL585101UL

LiftMaster Industrial Slide Gate Op. 1 HP 115/230/208V 1 Ph Heater NOT Incl. ***NLA

SL585UL features a heavy- duty industrial lockable metal cover.
Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
Manual Disconnect when unlocked allows gate to be operated manually.
Quick Close and Anti-tailgate quickly secure property preventing unauthorized access.
Lockout/ tag-out Feature prevents power from being switched on when servicing operator and safeguards workers from high-voltage power.
Automatic Solenoid Brake prevents the gate from being back driven.

.......more details

Installation Manual Manuel installation Brochure Sell sheet

MV-00049

Micanan AB Reflective Photocell GRU 115V with MK00480 bracket (60-2439)

Includes eye reflector and bracket

K74-30763

LiftMaster Plug-In Transformer 120VAC ****Discontinued Use APOW3

120VAC 50-60Hz 36VDC 1.1A Output
Used on the LA400
Discontinued in 2018 use APOW3 instead

2500-2393

Linear Apex I Module

Older model prior to Jan 2016

MP00130

Micanan Up-Charge Track and #41 Chain for 14' h Door PRO-APTC

For 1/2 HP Micanan trolley operator PRO-APTC

CP-SH-58-1038-HDC

Lynx Complete Limit Shaft Assembly for HDC

5/8" x 10-3/8"
Same kit used for MCJH except the HDC has 1 extra nut

K20-3200C-5

LiftMaster Electric Motor 2 HP 575V 3PH CF

Also known as: 20-3200C-5 K20-3200C5 K20-3200C-5-H27

MD-00348

Sprocket 50B26 x 1" 1/4" KW 2SS

PRO-GH-7543U-R

Micanan 3/4HP 460V 3P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PRO-H-5021-U-RH

Micanan 1/2HP 230V 1P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL
On-Board receiver holds up to 20 transmitters

S2TR2681E2

Erone 2-Channel Mini Transmitter 868MHz

Wireless System Chart

MG-00127

Micanan Plastic Spacer for Boards (Short Length 0.382)

MK-00047

Micanan Overload Reset 1-Phase 25 Amps

MK-00048

Micanan Overload Reset 3-Phase 1.2 - 1.8 Amps

MK-00045

Micanan Overload Reset 1-Phase 18 Amps

MK-00562

Micanan Relay 120 VAC 8-Pin Plug-In

MK-00225

Micanan Transformer 110V-24V-100VA

MK-00222

Micanan Transformer 460V-24V-100VA

MK-00024

Micanan Single Limit Switch AT

MW-00020

Micanan Splash Proof Cover Fully Assembled T TB SD

Splash proof cover for models: PRO-T/TB
Same as MP00251

MK-00477

Micanan Timer Plug-In Type 0-10min 120V

TN33C

Wire Nuts (Marrette) Yellow 22-10 AWG 100/Pkg

Screw-on wire connector
Wire Range: 22-10 AWG
Rating: 105C (221F)
Voltage: 600V
Approval: CSA UL 486C Listed

MV-00236

Micanan Key Switch O/C Tamper Proofw/Best Core Cylinder Nema 4 Surface Mount

MK-00785

Micanan 3-btn O/C/S Nema-7/9 Pushbutton Control Station

Surface mount
Killark

MV-00008

Micanan 2-btn O/C Nema-4 Pushbutton Control Station

Surface mount
Non-Metallic

MV-00006

Micanan 3-btn O/C/S w/Key Lock-Out Nema-1 Pushbutton Control Station

Flush mount

111075.0001

Overhead Door Poly VBelt for RSX and RMX Jackshaft/Hoist Commercial Operators

Serpentine belt compatible with Overhead Door standard duty RSX and RMX operators.
6-rib poly VBelt
31"

HAML-WIRING-HARNESS

GDI Wiring Harness Length Per Foot G3343

If over 10' is required

ME110-2W-BLK-E

Miller Edge 2-Wire Black End Outlet 7/8" wide x 3/4" high Sold by the Foot

Electromechanical slide in edge for counter shutters rolling doors and barrier arm applications.
Touch sensitive signaling allows for immediate stopping and reversing of motion.
Temperature range -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet