Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Bearings
41A5658-1

LiftMaster Dual Gear & Sprocket Assembly

  • This complete kit is compatible with 3/4HP LiftMaster® Models 8587/8587W; and various dual AC chain drive garage door openers.
  • Kit includes: helical gear and top hat assembly worm gear wear bushings grease and hardware needed to replace the chain drive gears.
BLSI12-PM39X

Pivin Drapeau Spring Assembly for BLS12

109007.3901.S

Overhead Receiver 390 Mhz

  • 9 switch trinary fixed code 3-wire gate and garage door receiver
7001-16-BRONZE

Commercial Side & Top Weather-Strip 16' Long - Bronze (BZ)

  • Bronze galvanized steel with bronze dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
7001-10-BRONZE

Commercial Side & Top Weather-Strip 10' Long - Bronze (BZ)

  • Bronze galvanized steel with bronze dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
K75-12584

LiftMaster Complete Brake Assembly GH 115V

  • Complete assembly includes: Brake hub kit Brake release lever Brake disk Spring cup Studs Compression springs Brake solenoid Solenoid cover Spacers Mounting plate Pressure plate Feather key and Fastener.
SPECIAL-ORDER

Special Order Item

ETOOL

LiftMaster Edge Cutting Tool***NLA

ME113-4WIRE-E

Miller Edge Black End Outlet 4-Wire Monitored 1-1/2" wide x 1-1/2" high Sold by the Foot

  • Slide in edge designed for commercial sectional doors
  • Retrofits easily to 1-1/4" to 1-1/2" sectional doors
  • Touch sensitive signaling allows for immedita stopping or reversing of motion
  • For a sectional door: measure the daylight opening of the door or measure the panel width of the door
  • This gives you the "active length" of the edge - the length to order.
  • Lead wire: 22 gauge universal
    • .......more details
WorksheetInstallation manualSell sheet
26CW94322-CUT

Truck Door Bottom Panel with Seal (12" x Cut-To-Size) Painted White for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
  • Comes only with bottom retainer and seal (installed)
    • .......more details
26CW94222-CUT

Truck Door Bottom Panel with Hardware (12" x Cut-To-Size Painted White for Whiting Dryfreight

  • These panels are cut to customer's specifications
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
  • Comes with pull strap two bottom roller shaft covers stud plates standard lift handle seal & retainer
    • .......more details
MD-00137

Micanan Roller Chain Waterproof #41 10' Pack

SPECIAL-ORDER-SS

Special Order for Stainless Steel Door Products

36773S

Genie Carriage Assembly for 8' Door

  • Works on Genie IntelliG 1000 & 1200 Garage Door Openers
  • Includes: carriage emergency release rope and straight arm.
  • Carriage assembly connects to the shuttle assembly and in turn creates the manual release function for the garage door.
36773R

Genie Carriage Assembly for 7' Door

  • Works on Genie IntelliG 1000 & 1200 Garage Door Openers
  • Includes: carriage emergency release rope and straight arm.
  • Carriage assembly connects to the shuttle assembly and in turn creates the manual release function for the garage door.
33101

Overload 0.90 to 1.50A

  • Setting range 1.1 - 1.6A
BEARING012

Manaras Flange Bearing Green for 1' bore ** Repl. by BEARING047

  • 15/32" bolt holes
768

Fasteners Lag Screw Hex Regular Profile 5/16" x 3" 100/Bag

  • 7/16" head
MU22-4WIRE-U-Y

Miller Edge MU22 4-Wire Universal Yellow - Sold per Foot

  • Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
10FT-CHAIN-LDO

Linear 10ft Chain T- Rail for LD050/LS050/LDCO (HCT10C)

  • 10ft chain-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
  • Fully-assembled & pre-tensioned
MX00034

Micanan Brake Assembly for PRO-HHD Solenoid NOT included

  • Solenoid sold separately
GH-3-RH

Doorlec Industrial Jackshaft Door Operator 3 HP 575V 3P TEFC Motor Right Hand

  • Custom-designed extra heavy-duty industrial-type electric door operator
  • Worm gear reducer 40:1 ratio
  • #60 roller chain and sprockets from operator shaft to door shaft.
  • Door speed: 7 inches per second (approx.)
  • Adjustable torque limiter
  • Rotary type limit switches
    • .......more details
ME00002

Micanan Clutch (Input) Shaft Only for Pro-H/HB

  • 3/4" x 16-5/8"
TRACK-GUARD48-NP

Track Guard 48" Tall Safety Yellow Sold as a Pair No Floor Plate

  • Provides impact protection to vertical track
  • 45° angle flange adds strength protects from side impact.
  • 7-gauge steel construction powder coated safety yellow for high visibility.
  • Wall flange drilled with slotted holes for four 3/8” anchors
  • Includes: 60-5106 (right) and 60-50105 (left) sides
5001-14-DK-BROWN

Residential Side & Top Weather-Strip 14' Long Commercial Brown

  • PVC wrapped
  • Painted aluminum retainer
  • Dual fin vinyl
5001-8-DK-BROWN

Residential Side & Top Weather-Strip 8' Long Commercial Brown

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
AW14K500-12

Miller Edge Air Wave Kit 12ft No Coil Cord

  • AW14 12ft. of RAH-500 P-50H 218-27-18 P50
  • Kit Includes: AW14 Air Wave Switch Barbed Coupler (12') RAH-500 1/2" dia. Rubber Hose Wire Nuts End Plugs
LITH-9V

Battery 9 Volt Lithium

36051R

Genie Replacement Carrage Assembly

  • For Genie belt drive garage door opener model 2040L
26CW94625-CUT

Truck Door Top Panel w/o Hardware (15" x Cut-To-Size Painted White for Whiting Dryfreight

  • These panels are cut to customer's specifications
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
109435.0001

Overhead Limit Switch

.283-334-L

Cut-to-Length Torsion Spring .283 x 3-3/4" Left Hand Wound White

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
28301

Insert Bearing Pillow Block Hy-Speed 1"

  • ASPP-205
15-41B14LGH

Sprocket 14 Teeth 1" Bore 1/4" Keyway

  • Same as 15-41B14LGF
STRUT-3-18'

Door Strut 3" Hemmed 18ft Long

  • Reinforcement bar 3"
TRACK-3"-RAW-24

Raw Vertical Track 3" 24'-0" Sold per Piece

37408-PREWIRED

Doorlec Reversing Contactor BF9 120VAC Prewired for Single Phase

PRO-HB-5011U-LH

Micanan 1/2HP 115V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake included
  • On-Board receiver holds up to 20 transmitters
Installation manualSpecification sheet
27-24417

Truck Door Dual Torsion Spring Assembly 96/35 for Whiting Roll-Up Doors

  • Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
  • Springs are treated with rust preventative
  • Roadside cable drum is color coded RED
  • Specs: Shaft Length: 96" Spring Length: 35" Wire diameter: .187 Winding cone color: White
TRACK-2"-RAW-10

Raw Vertical Track 2" 10'-0" Sold per Piece

  • 120" long 10'-0"
TRACK-2"-RAW-13

Raw Vertical Track 2" 13'-0" Sold per Piece

DM413-COATED

Special ends 2023-07-31

Cable Drum Standard Lift 12' Specialty Coated 400-12 Pair

  • Use for Commercial Standard Lift Doors
  • Maximum Door Height 12'1"
  • Lifting Weight Per Drum 375 lbs.
  • Resists Chemical/Moisture Corrosion
  • Abrasion Resistant
  • Thermally Stable Coating
    • .......more details
MP00053

Micanan Track and #410 (#48) Chain for 7' h Door *Actual length 114"*

  • For 1/3 & 1/2 HP Micanan trolley operators
MP00087

Micanan Track and #41 Chain for 7' h Door *Actual length 114"*

  • For 3/4 & 1 HP Micanan trolley operators
MD00413

Micanan Flex Coupling Lovejoy 3J x 3/4"

SL14COP-50

Copper Sleeve 1/4" 50 Sleeves per Pkg *price on request

  • Oval sleeves ONLY
  • Stops sold separately part # ST14COP
26140

Doorlec Cam Shaft Threaded 5/8" x 10-3/4"-24

  • This limit shaft will work on all Side-Mount Doorlec Openers
  • Cam shaft 5/8" (1.59 cm) - 24 x 10 3/4" (9.5 cm) fine thread
S142ARNN115

Carlo Gavazzi Amplifier 115V

  • Processor controlled amplifier for one set of photoelectric sensors type MOFTR.
  • 11-pin circular plug for easy connection.
  • 8A SPDT relay output NPN/ PNP transistor output or alarm output.
  • Diagnostics for sensor test during operation.
  • Alignment help via LED or alternation of alarm output.
  • Level indication for dirt accumulation.
    • .......more details
MD00020

Micanan Sprocket 50B40 X 1-1/4"

2807.192.340

Whiting .192 x 2-3/16 x 34" Curbside with Cones

Q088

LiftMaster Arm Assembly HCT K75-50146

  • Same as K75-50146
PRO-LT-5011-U

Micanan 1/2HP 115V 1P Commercial Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial doors with standard lift tracks that require no more than 15 cycles per hour
  • Trolley track for door up to 12ft standard upcharge for 14' & 16'
  • Door speed 9 inches per second
  • UL325
  • On-Board receiver holds up to 20 transmitters
RESET010

Manaras Resettable Overload Fuse 13A 1 Phase

18002

Doorlec Reducer #80

41A5047

LiftMaster Door Bracket Kit

  • Also known as: 12C582 12B198 12B374 062265 41A5047 12B374-2
  • Includes door bracket clevis pin and lock ring
255744-BEAD

Wayne Dalton Bead Style Bottom Seal Yellow Sold per Foot

  • Yellow
  • Width: 5-7/8"
LMTBU

LiftMaster Monitored Through Beam Photo Eye Nema 4X ** To exent of inventory

  • Meets 2016 UL 325 requirements
  • Long Range powerful beam provides reliable performance.
  • Sensing distance up to 90 ft.
  • Anti-Fogging Lens
  • NEMA 4X rated
  • Wireless network mode eliminates the need to wire between operators in dual-gate applications.
    • .......more details
SD751L5-RH

LiftMaster Heavy-Duty Slide Door Operator 3/4HP 115V Right Hand (Must include hardware box)

  • Perfect for split and sliding doors involved with industrial applications.
  • It is installed above the door and corresponds with the direction the door will be traveling.
  • Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
  • The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
  • Built In Security+ 2.0 radio receiver
  • Solenoid brake included
    • .......more details
Installation manualManuel d'installationSell sheetBrochure
2376.171_22.840

Whiting Torsion assembly .171 wire size 22" spring length 84" shaft

WB-400-24V

Audible Warning Device Exterior Surface Mount 24V

  • 6" bell 85 DBA
BL-BAG-12

Barlock Hardware Bag Only for Doors 13ft and Over

  • Does NOT include the locking bars
Assembly Manual
41A3589-1

LiftMaster 8ft Belt Assembly for Models '93-2000

  • For use with LiftMaster belt drive models 1270 1280 1280R.
  • Full belt assembly
  • For use with Chamberlain belt drive models 8100 8200 and 9200.
  • For standard 8 foot high garage doors
  • T rail assemblies ONLY.
Q013

LiftMaster Idler Pulley K75-50090

  • Toothless idler gear for use on SL 3000 operators
  • Includes bolt and sleeve.
  • Dimensions: 3.5" diameter 1-3/8 wide with 1/4 off set total width 1-5/8 with 1/2" x 2-7/8 bolt idlers sold individually
MD-00278

Micanan Roller Chain Nickel Plated #410 Sold by the Foot

FRONTIDLER007

Manaras Front Idler Assembly #48 (#410)

4007-14FT

Aluminum Retainer only for Light Brush 90 degree

  • For angle application
  • For use with Light Brush or Vinyl Insert.
  • die # A-25060
DM11VL-T/FORCE

Cable Drum Vertical Lift 11' D850-132 Pair Torque Force

  • 11' Vertical Lift aluminum die cast alloy.
  • 3/8"-16 x2" hardened cup point set screws installed with red heads.
  • Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH. Max. Door Height: 11'-1".
  • Rated Lift per Drum: 425 lbs.
  • Max. Cable Diameter: 3/16".
  • Mounting: 1" solid shaft with 1/4" keyway.
    • .......more details
34030308

Polyester Lifting Sling Type 3 Eye / Eye 3" x 8'

  • 2-ply
  • Minimum tensile strength of 9800 lbs per inch of width
PPLV1-100

LiftMaster Passport Lite 1-Button Visor Remote with Sec+ 2.0 Technology 100/PKG

  • Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
  • These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
  • 2x the range of standard remote controls
  • Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
  • Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators
  • Sold in a 100 pack
    • .......more details
Programming InstructionsInstructions de programmationSell sheetBrochure
SL332COP

Copper Sleeve 3/32" 100 Sleeves per Pkg ** Price on request

  • Oval sleeves ONLY
  • Stops sold separately part # ST332COP
HDC-123-RH-CONT

Lynx Ind. Jackshaft with Hoist 1 Hp 220V 3ph Contactor Right Hand

  • 1/2 3/4 1HP 115-230-460 or 575V single or three phase motor capacitor start overload and under voltage protection.
  • Solid state circuit board Lynx-6000. Built in 1.5 second delay.
  • 5L V-belt primary reduction #50 drive chain and sprockets.
  • Adjustable friction clutch magnetic solenoid brake.
  • Precision pillow block bearings on output shaft.
  • Fully driven adjustable limit switches.
    • .......more details
EP2978

Exhaust Port 3" long barrel

  • For use on insulated door panels up to 2" thick.
  • Inside diameter: 3" Includes fasteners & gaskets.
  • Outside diameter: 3-3/8"
  • Flange: 4-15/16"
  • Sleeve: 2"
  • Polished aluminum finish.
    • .......more details
D-2-6

Keyed Disconnect Device 6ft Cable

  • Operated from the outside to disconnect the trolley for manual operation of the door
  • Must specify if keyed alike is required or keyed random will be shipped
  • Mounting plate dimensions: 2 1/2” x 1 3/32”
Q239

LiftMaster Limit Switch Wire Harness K70-51094 **DISCONTINUED

  • Includes harness and 4 limit switches for Miracle One
1A4324

LiftMaster Steel Angle Hood Mount Bracket

  • Heavy-gauge steel bracket used for vertical or horizontal mount for either front or top of coil mount.
  • May be welded.
  • For use with LiftMaster Model DJ DH MGJ GH J and H.
  • Cannot be used with Model GH 3HP.
5-36-7

2" Vertical Track 14-GA 12'-4" (13' door) Sold per Pair *** NLA

5-36-6

2" Vertical Track 14-GA 11'-4" (12' door) Sold per Pair

732

Fasteners Flat Washer 3/8" SAE 1" OD Zinc 1000/Box

  • 7/16" ID x 1" OD x 5/64" thickness (ID: 0.4375’’ OD: 1’’ THK: 0.084’’)
.343-334-R

Cut-to-Length Torsion Spring .343 x 3-3/4" Right Hand Wound Blue/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
GD-STEND-18D

End Cap Steel 18G 18" Double 1-3/4"

SP20W12V

LiftMaster Solar Panel Kit 12V 20 Watt

  • Includes mounting bracket and hardware with 10' cable
Installation guideGuide d'installation
111914.0002.S

Overhead Sprocket 28T 1/4P 501 D-Bore

  • Sprocket for the limit shaft
  • For the 1/2 hp 3/4 hp & 1 hp hoist RHX operator.
MD-00248

Sprocket 50B28 x 1" 1/4" KW 2SS 5/16"

C-123-L

Aiphone Door Answering Intercom System

  • Door answering intercom system for home or business
  • Master room station: 7-1/2" X 5-1/8" X 1-3/4"
  • Door station: 4-3/4" X 3-7/16" X 1-1/8"
  • Power supply 6V DC 800 mA not included
BL-16

Barlock Kit Complete for 16ft Wide Door Kit includes hardware bag

  • Kit includes hardware bag and bars (97-1/2")
Assembly Manual
770

Fasteners Hex Serrated Flange Head Bolt 3/8-16 x 1" 1000/Box

  • Zinc
  • Grade 5
346

Cable Clamps Galvanized 3/16" Sold per piece

  • Galvanized malleable cable clip
.343-514-L

Cut-to-Length Torsion Spring .343 x 5-1/4" Left Hand Wound Blue/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-525-INSTALLED
  • If cones are required a filler must be added use part # FILLER
SLR-221

Linear Residential Slide Gate Op. 1/2HP 230V 1 Ph - Cold Weather Package NOT Included

  • Integral entrapment sensing system with digital set point for quick accurate adjustment and enhanced safety
  • Continuous-tone entrapment alarm with reset button
  • LED diagnostic display for ease of setup and troubleshooting
  • Selectable pre-start and run alarm with provision for ADA compliant visual pre-start and run alarm
  • Regulated 24 Volt DC power available for access control accessories
  • Integrated maximum run and auto close timer (0-9 minutes)
    • .......more details
7001-16-CHARCOL

Commercial Side & Top Weather-Strip 16' Long - Charcoal (H)

  • Charcoal galvanized steel with charcoal dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
110550

Allstar MVP 3 Channel 24V 3 Terminal 4 Wire Receiver 318 MHz *** NLA

  • 3 channels 4-wire 3-terminal operator connection
  • Wire antenna included
  • Compatible with Allstar Classic Allistar and Pulsar dipswitch transmitters and MVP quik-code transmitters
  • Power: 24 VAC/VDC
  • Codes: 19683
  • RF frequency: 318 MHz
    • .......more details
Programming instructions
CP-ARM-NEW

Lynx Auto Re-Connect Carriage Arms Only New Style 14-1/2"

  • Arms only for CP-CRG-NEW
LVB1020-11

Laminated Bumper Black 10" Projection Vertical Installation 20" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
CR2025

3V Lithium Button Cell

37313

Doorlec Relay Flat Pins 2 Pole 24V

60-2439

Allen Bradley Swivel / Tilt Mounting Bracket ***No Longer Available***

  • For 9000 series photo switches
SNS1P6

Belden RG6 Co-axial "F" Male connector Snap-N-Seal

K20-3050B-4P

LiftMaster Electric Motor 1/2 HP 208/230/460V 3Ph L3 L4 Contactor

  • Standard 1/2 hp motor
  • Same as 20-3033-1
PRO-HB-7511U-RH

Micanan 3/4HP 115V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake included
Installation manualSpecification sheet
744

Fasteners Pan Head Tek Screw 3/4" long #8 Head 1000/Box

  • 8 x 3/4 Pan Socket Tek Zinc