Devanco Canada - Get The Right Garage Door Opener‎ and Parts

42685

Doorlec SGP Operator Cabinet Only

GHX-311-3/4HP-RH

Doorlec Explosion Proof Gear Head 3/4 HP 120V 1PH ECB Right Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings
NEMA 7/9 O/C/S push-button station included

CP-RE-24-OMRON

Lynx Relay 24V Omron DPDT 10A

MT21-2M-BLACK-LH

Miller Edge 2-Wire Monitored Pressure Sensitive Edge Black Left Hand Outlet Sold per Foot

��Electromechanical medium profile edge for rolling fire door applications. •Touch sensitive signaling allows for immediate reversing or stopping of motion. •The MT21 is completely felixible and will contour to curved surfaces. The MT21 will also act as weatherstrip. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

31120-112-3/8

Doorlec Sprocket 50B36 1-1/2" Bore 3/8" KW

36 tooth sprocket

MT21-2M-BLACK-RH

Miller Edge 2-Wire Monitored Pressure Sensitive Edge Black Right Hand Outlet Sold per Foot

��Electromechanical medium profile edge for rolling fire door applications. •Touch sensitive signaling allows for immediate reversing or stopping of motion. •The MT21 is completely felixible and will contour to curved surfaces. The MT21 will also act as weatherstrip. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

OSH-6813-M-N1-RH

Manaras Opera-SH 3/4 HP 208V 1 Ph Monitored ECB w/N1 Photoeyes Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

MG123-BLACK-NM-U

Miller Edge Black Non-Monitored Universal Outlet 2 -Wire 2" wide x 1-1/2" high Sold by the Foot

The MG123 sensing edge is identical to the ME123 in shape and dimensions
The only difference is the rubber compound softer which makes it a bit more sensitive than ME123 (4-7 lbf vs 6-11 lbf).
Easy to install
Optimum size for 2 inch gate surfaces
Double-T design for added stability
Mounts vertically or horizontally

.......more details

1404-10FT-SAND-XL

Residential Side & Top PVC Weather-Strip with cap 10' Long - X-Wide Sandstone (D)

Extra Wide Profile 2-1/2" wide
Flexible co-extruded cap to hide screws
Dual Fin PVC that seals against the door
Material: Rigid PVC / Flexible PVC Co- Extruded
Colors: Black Brown Bronze Cream Sandstone White
Lengths: 7′ 8′ 9′ 10′ 12′ 16′ 18′

.......more details

D0MKTRP001

DURULITE STD-IND ROLLER KIT

oller kit for Chase Doors Standard DURALITE model doors. Fits 90 X 90 and 180 X 90

0824-2-WHITE

Elton Commercial Window 2" thick Door 0824 White Frame Sealed Glass

Screw together window kit
Thermal window
Frame size: 23 15/16" x 7 15/16"
Cut-out size: 23-1/8" x 7-1/8""
Vision area: 21-9/16" x 5-1/5"
Different glass options and frame colours are available upon request

.......more details

2806.177*250

Whiting Spring Assby .177 x 2-3/16 x 25" Roadside

Replacement torsion spring with cones
Specs: .171 x 2-3/16" x 25" Long
Roadside
For Curbside order part # 2807.177*250

MULTI-GROOVE

Garex Ready to Install Door Multi-Grooved Special Order

Available with a choice of simple and varied colors this textured woodgrain door will meet your style and requirements for quality and durability
R-16

26142

Doorlec Cam Shaft Threaded 5/8" x 7-1/4" w/Sprocket GHX

Explosion Proof rotary shaft 1.59cm x 18.4cm

114-0298

RW Support 18 x 33

Size: 18 x 33
Material: Formed Steel 3/16" thick
Finish Black Enamal

MB-01204

Micanan Electric Motor Only 1/2HP 575V 3PH

C-Flange motor fits: GT GH GHC GSD

2806.192.290

Whiting .192 x 2-3/16 x 29" Roadside with Cones

2807.192.290

Whiting .192 x 2-3/16 x 29" Curbside with Cones

TD-134

SteelCraft Therm-O-Door Commercial White 20-Gauge *** By Quote Only

THERM-O-DOR® sets the industry standard in overhead commercial and agricultural garage doors.
TD-134 R-Value: R-16 1-3/4" Thick
Available in White only
Sold by quote only

CRATING

Crating Charge

C715477300K-1.25

Governor 1.25" Bore 1/4" KW

RB-G-K10C

Miller Edge RBand Monitored Wireless Gate Edge System

RBand Gate Edge Transmitter/Receiver System
The system is intended to provide a wireless connection between a monitored sensing edge and a motorized operator that controls the associated gate
The RBand Receiver is compatible with up to 3 RBand Transmitters on 2 channels; 6 total transmitters.
RBand meets the 2016 UL 325 requirements for monitored devices and has been certified as a UL 325 Recognized Component.
It is designed for use with operators that comply with 2016 UL 325 using a Miller Edge 10K Sensing Edge.

2510-430

Linear Box Power Assemly SW/SL 230V Apex

The 2510-430 is a replacement Linear 208/230V Power Box Assembly
Input Voltage: 220/230/240 AC (60 Hz 1 Phase)

2200-150

Linear Chain #41 Sold per Foot

2300-925-BLACK

Linear Operator Cover Only Black

The Linear 2300-925-BLACK is a replacement black cover for the following series of gate operators: SWR SWC and SWD
Made of Polyethylene

2200-367

Linear Chain Tension (Light) Spring

Used on various Linear Gate operators

SP8-ARM

LiftMaster 8 ft. Arm with Yellow Padding. Requires MA031 ordered separately

Padded arm for MASDCBB3

GALV-319-6-R

Cut-to-Length Torsion Spring .319 x 6" Right Hand Galvanized Blue/Green

Spring wire only. Cones and Filler extra

GALV-319-6-144-R

Torsion Spring .319 x 6" x 12ft RH Galvanized Blue/Green

Wire size: .319
Inside diameter: 6"
Length: 12 ft

GALV-319-6-L

Cut-to-Length Torsion Spring .319 x 6" Left Hand Galvanized Blue/Green

Spring wire only. Cones and Filler extra

GALV-319-6-144-L

Torsion Spring .319 x 6" x 12ft LH Galvanized Blue/Green

Wire size: .319
Inside diameter: 6"
Length: 12 ft

R5993

Shaft Collar 1" Stainless Steel with 1 Set Screw

Set Screw: 5/16 x 18
1" ID

SBR-N1-0R-H120

Micanan Brake Assembly for PRO-HBH RH 120V Solenoid included

Solenoid Included

SBR-N1-0L-H120

Micanan Brake Assembly for PRO-HBH LH 120V Solenoid included

Solenoid Included

BCSI-PM04

Pivin Drapeau Gear Reducer in Synthetic Oil *** Price by Quote Only

OGH-6114-M-N1-RH

Manaras 1 HP 120V 1Ph Gear Head Operator with Monitored ECB N1 Eyes Right Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

2806.200.280

Whiting .200 x 2-3/16 x 28" Roadside with Cones

2807.200.280

Whiting .200 x 2-3/16 x 28" Curbside with Cones

.192-2-3/16-72-RH

Spring Wire .192 x 2-3/16" x 72" RHW Galvanized

.192 x 2.188" x 6'

.192-2-3/16-72-LH

Spring Wire .192 x 2-3/16" x 72" LHW Galvanized

.192 x 2.188" x 6'

.171-2-3/16-72-LH

Spring Wire .171 x 2-3/16 x 72" LHW Galvanized

.171-2-3/16-72-RH

Spring Wire .171 x 2-3/16 x 72" RHW Galvanized

1005-3-18'

Aluminum Bottom Retainer 3" U-Shaped 18' Long

For door thickness 3"

38001404

Tork Winch CW 1800 Curtain Winch Formally TW1200 *** Price by Quote Only

Special Order item

7176.218*28.85

Whiting Heavy Duty Torsion Assembly .218 x 2" shaft 85"

2376.206.35.940

Whiting Torsion assembly .206 wire size 35" spring length 94" shaft

GHX-311-1-RH

Doorlec Explosion Proof Gear Head 1 HP 120V 1PH ECB Right Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings
NEMA 7/9 O/C/S push-button station included

19045

Doorlec VBelt 4L360

24040

Doorlec Roller Chain #40 Sold per Ft

50181

Doorlec Brake Assembly 230/208V W/Double Pulley

Complete brake assembly

41011

Doorlec Brake Release Cable

Used on GH

SW-500-ADAPTER

Devanco Industrial Spring Winder 500 for 3.75" - 6" Adapter for Richard Wilcox Torsion Spring Plugs

Adapter for SW-500 to be used with Richard Wilcox spring plugs
This adapter is 5 mm higher than the universal model

BGARM14

LiftMaster 14' Arm only for Techna Barrier Gate

For use on Techna gate operator

Installation Manual Manual d'installation

HW-BRG-1

Lynx Bearing 1" x 2" OD

2 in total on a MCJH

AIRSWITCH018

Exterior Air Switch SPDT ABS Housing

EP2983-BLACK

Exhaust Port 4" non latching long barrel Black Nylon

Inside diameter: 4"
Outide diameter: 4-3/8"
Sleeve: 2" (non latching)
Flange: 6"
Includes fasteners
Black Nylon

.......more details

1222_DUAL_TROLLEY_12'

LiftMaster Dual Trolley kit for 12' high door includes #41 Chain for 12ft High Door Angle tracks (2x) 12' and (1x) shaft

Provides a second drawbar-type operation on wide standard door
Includes 12ft tracks #41 chain hardware & Round Bar 1" x 20'
Works with TDC12 & TDC22 Maxum operators

D4-12

Extruded Bumper Black 12" L x 4 1/2" W x 3 3/4" H w/Metal Insert

Reinforced prime rubber of Durometer 75 (±5) (ASTM D2240)
8.3 N/mm2 (±0.5) Tensile Strength (ASTM D792)
98% (±2) impact recovery
All extruded fenders are supplied with a metal washer insert

38000063

Tork Winch Electric Motor 1HP 115V 1Ph

Replacement electric motor for TW 1200

LVB420-11SF/P2

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P2

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

CDJH-12-115-UL

Lynx CDJH HD Jackshaft hoist commercial operator 1/2 HP 115V with ECB UL325

New LX100 circuit board.
Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
4L V-belt primary reduction #41 drive chain and sprockets.
Adjustable friction clutch Inherent Mechanical Brake included
Fully driven adjustable limit switches.
Heavy duty 3 button wall station (Open Close Stop).

.......more details

2806.177*340

Whiting Spring Assby .177 x 2-3/16 x 34" Roadside

Replacement torsion spring with cones
Specs: .171 x 2-3/16" x 34" Long
Roadside
For Curbside order part # 2807.177*340

OPHW-6113-M-N4-R

Manaras Opera-H 3/4HP 120V 1Ph w/Carwash Mod Monitored N4 Eyes RH

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"
Carwash Mod installed Nema 4 eyes supplied

.......more details

63000709

FAAC P Limit Switch Magnetic 746/844 (Rack)

Compatible with the 746 and 844 motors
Replaces discontinued FAAC Part; 7580375

MSJ-6534-M-N1-RH

Manaras MSJ 1 HP 600V 3Ph Monitored Board w/N1 Eyes RH

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
35 cycles per day > 150 cycles per day

.......more details

CBG24DCGMC

LiftMaster Techna Commercial DC Barrier Gate Operator White Cabinet

24VDC barrier gate operator with battery backup
Continuous-duty motor with soft start/stop
Exceptional starting torque and continuous operation
Heavy-duty motor supports 6000 cycles per day
Operator speed of 2.5 seconds to open or close
Aluminum alloy chassis

.......more details

Installation Manual SellSheet Data Sheet Wiring Diagram Quick Start Guide

50308

Doorlec Cam Shaft Assembly Comes With Bearings

Fits LJ LJH SGO

5001-16-CREAM

Residential Side & Top Weather-Strip 16' Long - Cream

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.
Sold by full case quantity (20)

5001-7-SANDSTONE

Residential Side & Top Weather-Strip 7' Long - Sandstone

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.
Sold by full case quantity (20)

2200-215

Linear Precision Bearing 5/8"

SW-200

Devanco Torsion Spring Winder 200 for 1-3/4" to 2-5/8" Torsion Springs

pring Winder 200 is a torsion spring tensioning tool designed for use with a cordless drill (Non-impact). Developed for professionals in the installation and maintenance of residential garage doors. The device prevents work-related accidents and significantly reduces physical strain of door installation work. The Spring Winder 200 is suitable for all residential garage door torsion springsranging from 1-3/4 inches to 2-5/8 inches. Technical Specifications:
Weight: 5 kg / 11 lbs
Length: 56 cm / 22 inches
Max. Torque: 147.51 lb/ft
RPM: 500-2000
Material: Aluminium steel plastic

.......more details

Sell Sheet

LB610-102

Laminated Bumper Standard Black 102" x 10" 6" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

MC271-2MON-RH-GY

Miller Edge MC271 2-Wire Monitored Right Hand Gray Includes End Flaps - Sold per Foot

Ideal for Cornell double angle bottom bar
Flexible and will conform to floor irregularities
Optimum size for 2+ inch thick surfaces
Custom manufactured to user specifications for color length and outlet location
5-inch end flaps create a complete seal and can be trimmed for custom fit
Sealed assembly impervious to dust and debris

.......more details

MOTOR318

Manaras Electric Motor 1 HP 120/240V 1Ph

Continuous duty C-flange TEFC 60Hz

2376.200.35.930

Whiting Torsion assembly .200 wire size 35" spring length 93" shaft

MGH-6215-M-N1-RH

Manaras 1.5 HP 240V 1P Jackshaft Monitored w/N1 Eyes Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

112357.0002

Overhead Logic Board for RSX 1/2HP 1PH

Fits OPRSXH75015BR

112357.0004

Overhead Logic Board for RSX 575V 3PH

Fits OPRSXH75015BR

5423.105

Whiting Side Seal 105" 5/16" Track Spacing

Quote required prior to sale to ensure correct fit

3257

Whiting General Purpose Bottom Seal #80841

Quote required prior to sale to ensure correct fit

K41-0082-000

LiftMaster HD Motor Replacement Kit

This service kit is compatible with the following models: HDSL24UL & HDSW24UL

K41-0095-000

LiftMaster DC Motor Drive HD Gate

This service kit is compatible with the following models: HDSL24UL & HDSW24UL

CP-LEV-BRAKE

Lynx Brake Lever

DC300-CABLE-P/FT

Dyna-Hoist 5-Conductor Cable Sold per Foot Increments of 5ft- Max 25ft

Sold in increments of 5ft to a max of 25ft

201-300-401-01-REFRUB

Refurbished 201-300-401-01 Unit

801-300-002-01-REFURB

Refurbished 801-300-002-01 Unit

017-034

Blue Giant Spring Wire T/L85 Spring **Special Order

Price by Quote Only

SUPPORT002

Manaras Board Support Rivet 0.236" Black ** Special Order Only

SUPPORT014

Manaras Board Snap Locking Support 7/16" ** Special Order Only

12118

Doorlec Commercial Aluminum Sliding Carriage

Works on Doorlec trolley operators

PPK3PHM

LiftMaster Passport MAX 3-Button Keychain Remote w/Proximity Sensor

Compatible with the PPWR Receiver for gate access control all 315MHz Security+ LiftMaster and Elite Series Gate Openers and all LiftMaster Garage Door Openers manufacture since January 1995
3-button keychain remote with proximity sensor
2x the range of standard remote controls
Narrow-band transmission

C12

Felco C9 Cable Cutter 3/8" Capacity

The FELCO C12 a two-hand wire and cable cutter designed for precision.
Made with unbreakable forged aluminum handles and high-quality hardened steel blades
The triangular cutting system allows for clean cuts without crushing the cable while the ergonomic design provides comfort and efficiency.
Length: 19.69 in
Weight: 3.75 lb
Cutting diameter: 0.47 in

.......more details

27209

Doorlec Electric Motor TEFC 3HP 208/480/575V 3-Phase DC333C

Frame size is 56C

MC271-2W-RH-GRAY

Miller Edge MC271 2-Wire Non-Monitored Right Hand Gray Includes End Flaps - Sold per Foot

Ideal for Cornell double angle bottom bar
Flexible and will conform to floor irregularities
Optimum size for 2+ inch thick surfaces
Custom manufactured to user specifications for color length and outlet location
5-inch end flaps create a complete seal and can be trimmed for custom fit
Sealed assembly impervious to dust and debris

.......more details

MC271-2W-RH-BLK

Miller Edge MC271 2-Wire Non-Monitored Right Hand Black Includes End Flaps - Sold per Foot

Ideal for Cornell double angle bottom bar
Flexible and will conform to floor irregularities
Optimum size for 2+ inch thick surfaces
Custom manufactured to user specifications for color length and outlet location
5-inch end flaps create a complete seal and can be trimmed for custom fit
Sealed assembly impervious to dust and debris

.......more details

CP-SP-ARM-REL

Lynx Barlock Spring

K41-0240-000

LiftMaster Idler Sprocket Qty 2 IHSL24UL

41-0240-000 is a Idler Sprocket Service Kit. Compatible with LiftMaster® IHSL24UL Series Industrial Heavy Duty Slide Gate Operators. Complete kit includes: (2) Idler Sprockets. Check the installation manual or replacement parts diagram for specific part information before ordering to ensure compatibility.

PRO-HBH-7521U-L

Micanan 3/4HP 230V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

3/4 HP230V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details