Devanco Canada - Get The Right Garage Door Opener‎ and Parts

22210

Push Button Station 3 Oval Buttons O/C/S Flush Mount ** discontinued. To Extent of Inventory

Three button wall station Open/Close/Stop
NO contacts on the Open and Close buttons
NC contact on the Stop button
Stainless steel surface plate
Flush mount

1104-10FT-CHARC

Residential Side & Top PVC Weather-Strip with cap 10' Long - Charcoal (H)

Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-18FT-BRONZ

Residential Side & Top PVC Weather-Strip with cap 18' Long - Bronze (F)

Bronze rigid vinyl retainer with bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Full case quantity only (12).

.393_3-3/4"-LH

Torsion Spring .393 x 3-3/4" x 12ft LH Orange

Wire size: .393
Inside diameter: 3-3/4"
Length: 12 ft

PRO-J-5021-U-LH

Micanan 1/2HP 230V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

K94-36408-2

LiftMaster Reset Switch LA400 with ID Resistor

For use with LiftMaster LA400 Series swing gate operators
Includes ID resistor kit
Includes LA400 product ID

410-0003

Gateway Weather-Stripping 1-3/8" Gray For Roll-Up Door Tracks Sold per Foot

HCTDCUL

LiftMaster Commercial High Traffic O/H Op. HCT Head Only 0.5 HP 120/230V 1PH BBU w/Eyes

Selectable Speed control opens up to 11" per second 25% faster than industry average to keep traffic flowing.
Low-Profile Design installs easily in tight applications at only 8" in height.
myQ® Technology enables you to securely control and monitor your gate operator from anywhere. (Cellular data or Wi-Fi® connection required).
Included: CPSUN4G Monitored Commercial Protector System® increases entrapment protection with through-beam infrared sensors with heavy-duty housings and brackets; NEMA 4 Rated; Maximum Range: 45 ft.
Security+ 2.0® On-Board Radio Receiver: Tri-Band 310/315/390 MHz frequency up to 50 remote controls (unlimited with 811LM/813LM)

HCTDCUL Installation Manual HCTDCUL Manuel Installation Sell sheet Brochure

PDC300-1-125-40-20-CH

Pulse300 Direct Drive Opener 1 HP 110/240V 1ph 1.25" Shaft 40:1 20' Cable ** Price by Quote Only

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

.......more details

PDC-300-075-1-40/50-20-CH

Pulse 300 Direct Drive Opener 3/4 HP 1" shaft 110/240V 1ph 40:1 20' Cable

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

.......more details

PRO-TBW-7511-U

Micanan 3/4HP 120V 1P Trolley Operator with Brake and Carwash Mod N4 Eyes

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

PRO-GHW-5053U-R

Micanan 1/2HP 575V 3P Gearhead Op w/Carwas Mod N4 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

GSLG-A-143

Linear Commercial Slide Gate Operator 1 HP 460V 3 Ph - Heater not Included

Integral APeX Controller three-button control station
Variable speed settings- Up to 24" per second (soft start / stop)
Programmable speed control
Direct C-face drive with brake
Power on/off switch
#50 roller drive chain and sprockets

.......more details

BGARM10ART84

LiftMaster TECHNA Barrier Gate Arm 10 ft w/84" Clearance without LED

10’ Functional length arm with an 84” articulated clearance height from the base of the arm
All parts ship in a single carton box for convenient transport and storage ensuring easy on-site assembly. The arm is field-customizable for added flexibility.
Made from durable aluminum extrusion with secure fasteners for a reliable fit. Arm joint uses bolts nuts and washers for stability and are reinforced by a torsion bar for added strength.
Operating Temperature: -13°F (-25°C) to 140°F (60°C)
Requires TECHNA PARKING operator.

PBG24DC

LiftMaster Techna DC Barrier Gate Operator Grey Cabinet Arm & Heater Sold Separately

GDO Learn Button Color Compatibility (Learn Button Color ): Connect to other gate operators via menuinterface and programmable relays
Connectivity: Wi-Fi and Ethernet
Event History: 50
myQ Compatibility: Supports myQ Facility with dedicated Parking
Operating Temperature: Without heater: -4°F (-20°C) to 140°F (60°C); With optional heater: -40°F (-40°C) to 140°F (60°C Outdoor Rating IP65
Display Type: LCD color display with 4 button interface

.......more details

PCBA-PLCD10

Dyna Hoist/Pulse Replacement LCD Assembly Pulse 500 Series

K26-438

LiftMaster Artisan Timer

For use with various LiftMaster® Speed Jack Commercial Door Operators
Also known as: 26-438 AB117-00121 G26438 438USA
The DIP switches are used to set the time delay period between 1 and 1024 seconds.
The timer has an internal 1 second delay opening of the DIP switches adds their corresponding value to that internal delay.
The switches to the right are all opened for a total delay of 1023 seconds adding that to the internal 1 second provides the full 1024 seconds.
Any time delay from 1 to 1024 seconds can be achieved by opening the appropriate switches.

.......more details

OTBH-6234-1M00

Manaras Trolley Operator 1 HP 208V 3 Ph monitored w/N1 Eyes

Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
25 cycles per hour 80 cycles per day
It incorporates a drum-band type solenoid brake.
Tracks are an extra 36 lbs per track
3/4 HP & 1 HP operators come with #41 full roller chain

OSHW-6533-0M00

Manaras Opera-SH w/Carwash Mod 3/4HP 575V 3Ph Mon ECB w/N4 Photoeyes Right Hand

A heavy-duty V-belt drive industrial jackshaft operator with Damp Area Modification
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
Solenoid activated Brake

.......more details

CPT215-END-KIT-U

Miller Edge Universal End Kit for CPT215/223

Kit contains: 2) Caps (2) cages (1) wired plug (1) 10K plug (1) 8.2K plug (1) diode capacitor plug (1) non-mon. plug end plug (2) screws
This end cap will also work on the CPT223 extrusion

112337.0001.S

Genie Switch Assembly Interlock Expf *** Price by Quote

1222_DUAL_TROLLEY_20'

LiftMaster Additional Trolley kit for TDC operators for 20' high door includes #41 Chain for 20ft High Door Angle tracks (2x) 20' (Actual length 275") and (1x) shaft

Provides a second drawbar-type operation on wide standard door
Includes 20ft tracks #41 chain hardware & Round Bar 1" x 12'
Works with TDC12 & TDC22 Maxum operators

22DUALTROLLEY16

LiftMaster Dual Trolley Mod for TDC12 TDC22 to 16ft high **includes (TDC41-16) CHAIN PACK (10-5816) 16 FT RAILS x (11-52102) 1" Solid Shaft 12ft (DualAuxTrolley41) Hardware kit

Includes: TDC48-20 CHAIN PACK #41 16 FT RAILS x 1 11-5220 CRSBARROUND1" X 12' x 1 10-5820-P TRACKTROLLEYFOR 16FT DOORPRE-PUNCHED x 2 DUALTROLLEYMOD41 MOD-KITDUAL TROLLEY41 CHN x 1

MGH-6537-0M00

Manaras 3 HP 600V 3P Jackshaft monitored Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

LMA-1250-LV

Loop Detector with Deflectometer 1 channel 2 output 11 pin 12 - 24 VDC or 24 VAC *** SPECIAL ORDER subject to min dollar amount

The LMA-1250-LP operates with extremely low power requirements making it suitable for solar and battery powered applications
LMA-1250-LP operates on 12VDC or 24VDC nominal. Power consumption in the No Detect state is less than 4 milliamps at 12 VDC and less than 3 milliamps at 24 VDC
With a typical size vehicle over the roadway loop the DEFLECTOMETER® functions as a Sensitivity Meter.
The optimum sensitivity setting should provide a reading of “5”. You can adjust the DEFLECTOMETER® reading by using the front panel UP or DOWN sensitivity buttons.
Automatic quantitative feedback of the loop system operation ensures that the detector is set to the most optimum sensitivity level to detect ALL vehicles including motorcycles and high-bed vehicles

MT21-GRAY-LH

Miller Edge 2-Wire Pressure Sensitive Edge Gray Left Hand Outlet Sold per Foot

��Electromechanical medium profile edge for rolling fire door applications. •Touch sensitive signaling allows for immediate reversing or stopping of motion. •The MT21 is completely felixible and will contour to curved surfaces. The MT21 will also act as weatherstrip. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

26004A.S

Genie Bolt Retainer

The bolt retainer is used with the bolt that secures the pulley bracket to the pulley support

MKTG-1031-1

EMX Pastic Screw for IRB-4X2

Replacement screw only

PDC-300-075-1.25-40-20

Pulse 300 Direct Drive Opener 3/4 HP 1.25" shaft 110/240V 1ph 40:1 20' Cable ** Price by Quote Only

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

.......more details

026-G019

Blue Giant Proximity Sensor M30 M12 Connector

(30mm Unshielded) Home/Lip Sensor

VTS-GAREX-P/FOOT

Top Seal T Semi Rigid Vinyl Only Black Price per Foot

4239BK

26130

Doorlec Hoist Shaft Threaded 5/8" x 12" GH/GHX

Works on GH/GHX

28412

Doorlec Flange Bearing 5/8" Bore Oilite Bushing

Works on GH/GHX

TXTA-200

Pulse 3-BTN Transmitter 315MHZ

Three-Button Transmitter: Can be programmed to operate with up to three different receivers to operate up to three doors or for Open Close and/or Stop functions
315mHz: Works with RXTA-100 and RXTA-200 or as replacement unit for other LM receivers with 315MHz frequency.
Provided with visor clip for forklifts and trucks.
FCC Approved

HTR120NC

LiftMaster Heater Kit for Maxum

Allows for operation in extreme cold environments effective for ambient temperatures down to -31°F (-35°C)
120volt input power. standard 120V outlet required
Can be added easily in the field
Not for damp/wet environments

BPPN17510

Garex Bottom PVC Moulding Black for 1 3/4" Door U shaped 120" (10')

MA200

LiftMaster K1 Relay option for MA MAT and MAST Barrier Gate Operators

used with Mega Arm Barrier gate operators to control traffic lights etc

MOD163A

Manaras Heater in Reducer & C-Box 120V-1P 24VAC 15W + 30W

This modification is an option when ordering a commercial operator

OGH-6112-MON-LH

Manaras 1/2 HP 120V 1Ph Gear Head Operator Monitored ECB Left Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

SR-9004-WHITE

Elton Reverse Angle Clip-On Vinyl White 200ft Roll

Side Use – Clips onto Steel Jamb
Also for Residential Use

OTBH-6533-AM05

Manaras Trolley Operator 3/4 HP 600V 3Ph Monitored Board w/N4 Eyes Apt. Model

The Silencio model is a low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
100 cycles per day
It incorporates a drum-shoe type solenoid brake.
Tracks are an extra 36 lbs per track
#41 full roller chain
Includes monitored N4X eyes (PHOTO 061)

.......more details

G-21X13-134-CHRCL

Thermal Window Clear 21" x 13" for 1-3/4" Garaga Door Charcoal

For 1-3/4" thick door

K07-8003

LiftMaster lower Crank Link BG770/790 Barrier Gate

For use with BG770/790 barrier gate operator

2807.182*290

Whiting Spring Assby .182 x 2-3/16 x 29" Curbside

Replacement torsion spring with cones
Specs: .182 x 2-3/16" x 29" Long
Roadside
For Roadside order part # 2807.182*290

1404-16FT-BLK-XL

Residential Side & Top PVC Weather-Strip with cap 16' Long - X-Wide Black

Extra Wide Profile 2-1/2" wide
Flexible co-extruded cap to hide screws
Dual Fin PVC that seals against the door
Material: Rigid PVC / Flexible PVC Co- Extruded
Colors: Black Brown Bronze Cream Sandstone White
Lengths: 7′ 8′ 9′ 10′ 12′ 16′ 18′

.......more details

CYL-3BXLT

Replacement Cylinder Only for 3BXLT Comes with 2 Keys

7-6093

RW Bottom Cane Bolt 524 x 2 Zinc Plated

Zinc plated

1-0232

RW Hinge 434WM-BB Black 48" 3/8" x 3" wide Sold per Hinge

Pintle: Formed Steel 3/8" Thick
Strap: Formed Steel 3/8" thick x 3" wide
Pin: Zinc Plated Loose pin with cotter pin 1" diameter steel
Bearings: Precision Ball Bearings
Black Enamel

487135

Bircher Easy Loop Bracket

Bracket for part #487132

39794A.S

Genie Universal Cable Keeper Kit 39794A.S

Universal Cable keeper kit for Genie Wall Mount garage door openers.
Compatible with models 6070H 6070H-B 6170H 6170H-B 6172H 6172H-B 6072
Genuine Genie Replacement Part

40629A.S

Genie Wire Harness for Door Lock

Includes 1 wiring harness only
Connects to the door lock for Genie Wall Mount garage door openers Overall length 10'
Compatible with models 6070H 6070H-B 6072H-BO 6072H-O 6170H 6170H-B 6172H-BO 6172H-BSV 6172H-BV 6172H-O

BGARMFOAM

TECHNA Barrier Gate Arm Foam Insert

esigned for use with the TECHNA Barrier arm this 14' roll of extruded foam offers additional protection reducing the chance of vehicle scratches •IP68 rated waterproof LED lights •Operating temperature: - 13F to 140F ( -25C - +60 C) •Weight ~2lbs

5-18-4

Tapered Angle Continuous 2" Heel x 129" L Sold in PAIRS

For 2" track up to 2" thick

PRO-HBH-7553U-R

Micanan 3/4HP 575V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

3/4 HP575V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

L979U

LiftMaster Universal Wireless Keypad Security+ 3.0

Compatible with most brands of garage door openers manufactured after 1993 with safety sensors.
Designed to withstand all weather conditions.
Ultra-secure encryption.
Features include temporary PINs and one touch close.*
Keypad illuminates for nighttime use.
Warranty: 1 Year * Works with Chamberlain LiftMaster and Craftsman Garage Door Openers manufactured after 1997.

.......more details

Installation Manual Manual d'installation Compatibility Chart 2025 Comparison Chart 2025

L993S

LiftMaster 3-btn Standard Visor Remote Control Sec+ 3.0

Compatible with LiftMaster® Security+ 3.0™ garage door openers.
Up to 1300 ft. range (conditions permitting).
New and improved seamless set up.
Control up to three Security+ 3.0 garage door openers
NEW! Set up and manage your remote in the myQ app for a more personalized experience.
Ultra-secure encryption.

.......more details

Installation Manual Manual-Installation Compatibility Chart 2025 Comparison Chart 2025

L991S

LiftMaster 1-btn Standard Visor Remote Control Sec+ 3.0

Compatible with LiftMaster® Security+ 3.0™ garage door openers.
Up to 1300 ft. range (conditions permitting).
New and improved seamless set up.
Control one Security+ 3.0 garage door opener.
NEW! Set up and manage your remote in the myQ app for a more personalized experience.
Ultra-secure encryption.

.......more details

Installation Manual Manual d'installation Compatibility Chart 2025 Comparison Chart 2025

K15-50B18QGX

Output Sprocket for SL595 and SL595UL

��This is a replacement Output Sprocket. Compatible with LiftMaster® Model SL595U Slide Gate Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.

3-5273

Serco Pusher Assembly AB1000

MX000585-0

HySecurity Smart Touch Controller Board

Easy Installation Configuration
Warning Buzzer and Alarm System
Ethernet Connectivity via HyNet Gateway
Security Monitoring and Breach Reporting
Allows for the configuration of over 70 different settings for a reliable and highly customized gate operator

MX000642

HySecurity Right Counterweight Mount for StrongArm

Designed for HySecurity StrongArm gates
Provides balanced support for gate motion
Precision construction for accurate alignment
Improves performance and reduces wear

CTU48

Erone UHF ISO RFID Card U4GO Sold in Pack of 10

Compatible with A6U49 and A10U49
Pack of 10 cards
Customized printing available upon request
Available in dual technology (UHF + DESFire® EV2): CTU48EV2
Dimensions: 3.4 x 2.1 x 0.03'' (85.6 x 54 x 0.8 mm)

R4AES

Erone Radium 4-Button AES128 Encrypted Remote

Compatible with any high-security AES128 wireless receivers they were designed to prevent the cloning of remotes
The code sent by the remote changes at each activation removing any scanning and copying risk.
A special algorithm ensures a continuous synchronization between the receiver and transmitter
Includes AES128 encryption
Compatible with RADIUM AES128 receivers
Range up to 820 ft (250 m)

.......more details

A10U49

Erone Long Range UHF Reader U4GO 33FT

The readers which operate with AES128 encryption offer secure access in settings like parking facilities gated communities campuses hospitals and more
Stand-alone or Wiegand mode
Up to 33' (10 m) read range
Detects vehicles up to 50 mph (80 Km/h)
Includes receiver power supply and mounting bracket

Installation Manual Sell Sheet

7-6100

RW Hanger 160B2 Sold per Unit

Hanger used on #333 track
For door thichness: 2-1/4" to 3-1/2"

O02R9506

AirLift O Ring Orig. Op-AirLift

27118-600V

Doorlec Electric Motor TEFC 2HP 600V 3PH DC224C

Frame size is 56C 1725 RPM for worm-gear reducer driven models

OSH-6433-M-N1-RH

Manaras Opera-SH 3/4HP 480V 3Ph Monitored w/ N1 Eyes Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation brake and a floor level engaging device
Clearence: side room required 16"

42685

Doorlec SGP Operator Cabinet Only

GHX-311-3/4-LH

Doorlec Explosion Proof Gear Head 3/4 HP 120V 1PH ECB Left Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings
NEMA 7/9 O/C/S push-button station included

31120-112-3/8

Doorlec Sprocket 50B36 1-1/2" Bore 3/8" KW

36 tooth sprocket

GAREX-SCREW-2-1/2

Garex Wood Screw for Thermos 8 x 2-1/2" R16

Special-Order
Wood Screw 8 x 2-1/2" Flat Socket

BGARM14LED

LiftMaster TECHNA Barrier Gate Arm only 14ft with LED

Ships in manageable 6-foot sections for streamlined transport and storage enabling easy on-site assembly
Strong aluminum extrusion with reenforced male/female joining sections and fasteners for a secure fit
The arm features a bottom channel designed to hold BGARMFOAM thereby minimizing the chance of scratching the vehicle.
Compatible with the S50L a wireless edge safety device.
IP68 rated waterproof LED lights
Operating temperature: -25C - +60 C

.......more details

Installation Manual Manual d'installation

D0MKTRP017

DURULITE STD-IND V-CAM CAST ASSEMBLY KIT

-Cam Assembly Kit for Chase Doors Standard DURALITE model doors. fits 90 x 90 spec door.

111-0060

RW Box Track #33 Black 8ft Up to 700lbs

Finish: Black enamel

C715477300K-1.25

Governor 1.25" Bore 1/4" KW

ALUM-510

Aluminum 24" x 100' Spool Canyon Clay / Argile # 510

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 510
Reverse side is #431 Bright White

2200-150

Linear Chain #41 Sold per Foot

2300-925-BLACK

Linear Operator Cover Only Black

The Linear 2300-925-BLACK is a replacement black cover for the following series of gate operators: SWR SWC and SWD
Made of Polyethylene

2120-493

Linear Gate Arm Assy Weld Style for Swing Gate

841LM-NOBOX

LiftMaster Automatic Garage Door Lock No Box Connector with 3 pins

Automatic operation performs in tandem with the opener so it always locks and unlocks.
Anywhere assurance smartphone monitoring with the MyQ® App means homeowners always know that the garage is secure
Absolute protection the automatic deadbolt lock makes the garage door virtually impenetrable
Comes included with 8500W
Works on models 8550WLB 8360W 8587W & WLED
same as Part # 001D8875

.......more details

R5993

Shaft Collar 1" Stainless Steel with 1 Set Screw

Set Screw: 5/16 x 18
1" ID

SBR-N1-0R-H120

Micanan Brake Assembly for PRO-HBH RH 120V Solenoid included

Solenoid Included

2806.200.280

Whiting .200 x 2-3/16 x 28" Roadside with Cones

GHX-311-1-RH

Doorlec Explosion Proof Gear Head 1 HP 120V 1PH ECB Right Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings
NEMA 7/9 O/C/S push-button station included