Devanco Canada - Get The Right Garage Door Opener‎ and Parts

BK307

Jamb bracket J-07 #7 12 gauge

Sold by the piece
Height 3.75" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

MOD050

Manaras Friction Clutch Mod. #50 Chain Gear Head Operators

Installed directly on the output shaft of the operator.
Provides added protection by causing the clutch to slip when the door systems requires adnormal torque to be operated.
Includes sprocket for #50 chain
Operator mounting side must be specified
A spreader bar cannot be used in conjunction with this modification
This modification applies to OGH and MGH operators

.......more details

201-300-401-01

Equinoxe Long Range Transmitter O/C/S for 8-Doors 433 MHz New Generation

Open/Close/Stop remote for 8 doors
Range of approx. 1000ft
A heavy-duty remote for Industrial applications
Year 2016 +

Programming Instructions Instructions de programmation

12-10331

Flanged Bearing 3/4" x 1-1/2" x 1/8"

PPK3

LiftMaster Passport 3-Button Mini Remote Control with Sec+ 2.0 Technology ** To extent of Inventory

Programming Instructions Instructions de programmation Sell Sheet

1044622-REFURB

FAAC 400 Hydraulic Swing Gate Operator 115V Reburbished

Refurbished unit.
Tank body

9150000629

3/16" Stops ONLY 100/pkg

Stops only 100 per pack

TCR-1

Tri-Code Receiver Single Channel ** DISCONTINUED

Single channel receiver compatible with Linear Delta Multi-Code and Stanley radios
Three position direct connect tabs for commercial and residential garage door openers

Programming Instructions

GHX-6112-CONT-L

Manaras Explosion Proof Gear Head 1/2HP 120V Contactor Left Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings and NEMA 7/9 O/C/S push-button station

Installation Manual Sell Sheet

37408

Doorlec Reversing Contactor BF9 120VAC

.343-5-1/4-SQ-L

Cut-to-Length Square Wire Torsion Spring 31" long with Cones Left Hand

CPE

Erone Proximity Card Standard *** To Extent of Inventory

Hexadecimal number printed on each badge
8mm thick

763

Fasteners Flat Head Carriage Bolt 1/4-20 x 2-1/4" 1000/Box

Full length thread
Max torque = 6

AELD

LiftMaster Elite Plug-In Loop Detector

For use with Omni Control board available on the Chamberlain commercial line.

Installation Manual

SSZP24

Solid Shaft 1" Keyed Zinc Plated 24'

1116633904.S

Overhead 4-btn Transmitter 390 MHz *** Temp Unavailable

Replaces the 1091303904.S
4-channel transmitter opens and closes 4 doors
Codes using 9 dip switches with 3 positions
Battery (ALK12V) and visor clip included

CH505L5-RH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 575 VAC 3 Ph Logic 5 Right Hand

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with CPS-UN4 photoeyes

Installation Manual Manuel d'Installation Sell sheet Brochure

H755L5-LH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 575 VAC 3 Ph Logic 5 Left Hand

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

MOTOR254-WIRED

Manaras Electric Motor 1/2HP 120/240V 1PH Wired

Continuous-duty base mount 60Hz
This item is compatible with BRAKE011

41AC175-2

LiftMaster Electronic Circuit Board Assembly

For Sears / Craftsman garage door opener

703-004

Eclipse Gel Connectors Red 20-26 AWG 100/Pkg ** To Extent of Inventory ** Repl by 86-925

DF086.1

Whiting Dry Freight Door 3/4" with Track Balancer Standard Hardware and Side Seals

Includes side seal upgrade

990LM

LiftMaster Surge Protector ** NLA

Installation Manual Manuel d'Installation

4A1008

LiftMaster Master Link #48 Kit (2 sets)

For #48 chain
Kit (2 sets)

25-01575

Truck Door Beverage Body Roll-Up Door Cable

Includes one (1) pair of cables
Zinc plated tear drop
Length: 110 inches
Cable eye: 1/4
Cable construction: 7 x 7 galvanized

305-153613

LiftMaster Idler Sprocket Assembly (K305-153613)

Fits SL595

G65_18300

LiftMaster Thermostat Control Heater Fin Type for 115V & 575V Gate Operators

Heater used in BG type gate operators

Installation Manual

736

Fasteners Round Head Carriage Bolt 5/16-18 x 3/4" Gr 2 1000/Box

Full length thread
Max torque = 12

Q400-D

LiftMaster Circuit Board Assembly with Reset (Q400E)

76-G0537

LiftMaster Alarm Assembly Kit for SL540/580

Installation Manual

02-406

LiftMaster Push Button Station Nema 4 O/C/S with Keyed Lock-Out Die-Cast Enclosure

Code on key is #301

MU00001

Micanan Swivel Pulley

For models PRO-H / HB

CABLE_532SS-500

Cable 5/32" 7x19 Stainless Steel 500ft

Comparison charts

.234-2-L

Cut-to-Length Torsion Spring .234 x 2" Left Hand Wound Blue/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.218-2-R

Cut-to-Length Torsion Spring .218 x 2" Right Hand Wound Yellow/Orange

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

MOUNTSHAFT018

Manaras Limit Shaft Kit Opera

Drawing

312HMC

LiftMaster Universal Coaxial Receiver Sec+ 315 MHz

External 8" coaxial antenna included
Security+ rolling code technology and/or Dip switch compatibility
12 VDC or 18-35 VAC/DC jumper selectable
Momentary or constant contact selectable
For replacement antenna use 41C3196
Accepts up to 31 remote control codes on Normal Security setting

.......more details

Programming Instructions Instructions de programmation

.283_3-3/4"-LH

Torsion Spring .283 x 3-3/4" x 12ft LH White

Wire size: .283
Inside diameter: 3-3/4"
Length: 12 ft

MK00066

Reversing Contactor Allen Bradley 24V coil

Allen Bradley no. 104-C16KJH22-X6
Cat. no. 100-C16*10

41A4885-5

LiftMaster MVIS Pulley/ Worm Gear Assembly

Gear and sprocket assembly for belt drive units after 2002.
Assembly includes: Spring washer thrust washer retaining ring bearing plate two roll pins drive gear and worm gear helical gear with retainer and grease.

Installation Manual Manuel d'Installation

24-24-6

LiftMaster Small Relay 24VAC 11-Pin 3 PDT

CAM011

Manaras Limit Cam

Limit cam for Mountshaft018A 018B
2 cam's required per shaft

CAM004

Manaras Limit Cam

Limit cam for Mountshaft009A 018C 018D
2 cam's required per shaft

41A6102

LiftMaster Power Door Lock Connector with 2 pins

For Jackshaft models

.393_6"-RH

Torsion Spring .393 x 6" x 12ft RH Orange

Wire size: .393
Inside diameter: 6"
Length: 12 ft

.468_5-1/4"-RH

Torsion Spring .468 x 5-1/4" x 12ft RH Blue/Orange. **NLA

Wire size: .468
Inside diameter: 5-1/4"
Length: 12 ft

.192_2"-RH

Torsion Spring .192 x 2" x 12ft RH Silver

Wire size: .192
Inside diameter: 2"
Length: 12 ft

.192_1-3/4"-RH

Torsion Spring .192 x 1-3/4" x 12ft RH Silver

Wire size: .192
Inside diameter: 1-3/4"
Length: 12 ft

25-60652

Truck Door Reefer Bottom Roller Bracket Assembly for Whiting Style Doors ** To Extent of Inventory

Steel construction Black E-coat finish
Consist of roller clamp wear plate stud plate and 5/16" lock nuts
Stainless steel studs and nuts
Cross ref: 5600

17310

Doorlec DC-3000T2 2-btn Transmitter 313 MHz

One block of 10 dip-switches for programming
Will activate 2 Doorlec 17307 receivers (DC-3000R)
Includes visor clip and 9V battery

Programming Instructions

MJ00013

Micanan Brake Shoe and Drum Assembly

Fits Micanan models: TB APTB JB HB HHD LH LJ & SD
Assembly includes: Both right & left brake shoe and the drum

H14GHALF

Half Hinge #1 x 14 gauge

Bright zinc plated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 1-5/8" wide with slotted holes

SEL2641R433-Z4

Erone 4-Relay Stand Alone Receiver 433MHz

Up to 85 transmitter keys
2 NO relay + 2 NO/NC relay (24VA)
Self-learning memorization
Standard pulse output Relay number 4 can be setup to latched output
Can be used for O/S/C
Power requirements: 12/24Vac/dc

.......more details

Sell Sheet Brochure Wireless System Chart

LIMIT015

Manaras Single Limit Switch without Lever

No action limit switch - Cherry
Used on Manaras operators built from 2002 to Feb. 2009
Also used as disconnect switch on Opera models

Limit Switch Chart

RADIO-KIT004

Manaras plug-in receiver for Board 70 operators 390 MHz

Direct ECB plug-in receiver card kit (RADIO-RE101C) for adding or replacing on-site.
Maximum 50 transmitters per receiver.
Compatible with transmitters RADIOEM101 and RADIOEM103 SD/MD

RADIO-14

Manaras MR-1000 1-Channel 24V Receiver 313 MHz ** Replaced by RADIO-RE900

Controls one operator with MT series transmitters.
Operates on 24VAC.
A LED indicates that the unit has been activated.
Can be installed directly onto the control box of a Manaras operator.

Installation Instructions

2704.162_180

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 18" Long Galvanized

Most common torsion spring for cube trucks
Specs: .162 x 2-3/16" x 18" Long
For Curbside order part # 2705.162*180

298601

Linear Wireless Multi-Code Keypad 310 MHz

Compatible with 310 MHz Stanley and Multi-Code receivers
4-digit access code
Backlit keys
Easy access to battery
Power: 9-volt battery
Codes: 1024 (set by dip switches)

.......more details

Installation Manual

109710

Linear 4-Channel Multi-Code Visor Transmitter 310 MHz

Open/Close remote for 4 doors
Compatible with 310 MHz Stanley and Multi-Code receivers
Supplied with visor clip
Easy access to battery and coding switches - 10 dip switches
Power: 9-volt battery
Codes: 512 per channel (set by dip switches)

.......more details

Programming Instructions

2236.096

Whiting Coldsaver Intermediate Panel 12-1/2" x 96"

Fits Coldsaver Roll-Up Doors
1-1/8" thick 96" wide

1336.4

Whiting Roadside Top Panel Closure Bracket for 8" radius track

HAR-11

EMX Wiring Harness 11-Pin for D-TEK-MVP 5111-1

Universal 11-pin harness

1920.1

Whiting Stainless Steel Top Closure Mounting Plate for Insulated Doors

1005-2-24'

Aluminum Bottom Retainer U-Shaped 24' Long***Actual Length 24'4"***

For door thickness 2"

1003-1-5/8-16'

Aluminum Bottom Retainer L-Shaped

For 1-5/8" thick doors.

1003-1-5/8-10'

Aluminum Bottom Retainer L-Shaped

For 1-5/8" thick doors.

1104-12FT-BROWN

Residential Side & Top PVC Weather-Strip with cap 12' Long - Brown (N)

Brown rigid vinyl retainer with brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

25-42-110

Extension Spring 7' Door - 110 lbs White

Double - Loop
25" long 42" stretch 110 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

33LMC

LiftMaster 3-btn O/C/S Transmitter 390MHz *** Available to Extent of Inventory** use 813lmx

390 MHz 9 dip switch three button visor remote
Can be used for Open/Stop/Close when used with the LiftMaster 423LMC receiver.
Visor clip & 12V battery included (ALK12V)
Same as 33LM
Can be used as a substitute for 63LMC

Programming Instructions Instructions de programmation

95-00116

Truck Door Rivet 1-1/4" Stainless Steel ** To Extent of Inventoy

Stainless steel construction
Round head design
Cross Reference: T #89217-0040

28-32072

Truck Door 2" Horizontal Track with 8" Radius 107" Curbside (RH) for Whiting Roll-Up Doors

SPECS: Length: 107" Fits door sizes: Up to 96" high
Cross Reference: W #11-2
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints
8" radius
For use with 2" diameter steel or nylon rollers

.......more details

27-20307

Truck Door Balancer Bracket End - Roadside for Whiting Roll-Up Doors

Steel construction
Plain finish
Cross Reference: W # 2524 for # 2376 balancer

27-20126

Truck Door Spring Spacer 33" long for Whiting Roll-Up Doors

Extruded PVC construction with zinc plated thrust washer.
Cross Reference: 2471

26-94521

Truck Door Intermediate Panel (11" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

26-40402

Truck Door Reefer Side Seal 98" Long for Whiting Coldsaver

Co-extruded using PVC backing with flexible PVC seal against the door.
Cross Reference: W #7470

26-40001

Truck Door Bottom Seal Standard 98" Long for Todco Roll-Up Doors

Extruded from long lasting rubber
Prevents dirt and moisture from entering cargo bay.
Cross Reference: T #80840 W #3257 610200

25E10220

Truck Door Top Closure Plate & Slide Black E-coat finish for Whiting Roll-Up Doors

Steel construction Black E-coat finish
Included: Base plate slide bolt & flanged nut
Improved heavy-duty reinforced slide
Adjusts top panel for firm seal
Cross Reference: W #6944

Z9997

Hand Chain 25' for Manual Chain Hoists

Not SAE rated.
Designed for approx. 35 lbs

Z9404

Coupler 1-1/4" Bore Adjustable

Malleable iron for strength
With 2 jam nuts
1-1/4" Bore with 1/4" keyway

SF175

Spring Fitting 1-3/4" Pair

Universal thread for use in either LH or RH wound springs.
A pair includes: (1) winding and (1) stationary.
Maximum wire size diameter: .2950".
Set screw installed: 3/8"-16 x 1" (2)
Fits 1" shaft
Winding bar hole 1/2"

.......more details

SF200

Spring Fitting 2" Pair

Unviversal thread for use in either LH or RH wound springs.
Pair includes: (1) winding and (1) stationary.
Maximum wire size diameter: .3065".
Set screw installed: 3/8"-16 x 1" (2).
Mounting: 1" tube or solid shaft
Winding bar hole 1/2"

.......more details

CBC316

Thimble 3/16" - 100 per pkg

R5211

Cast Iron Pulley 5" with stud

5" Cast Iron Pulley with double stud
cast iron pulley mounted on two pressed sealed bearings
Maximum cable diameter: 1/4"

903024ORBG

Operator Reinforced Bracket 24" Galvanized

Comes with clevis & clip pins. 12 per carton.

25-10113**DISC

Truck Door 2" Steel Roller Long Stem for Whiting Roll-Up Doors Use Part # 94-61180-33-84

Unplated shaft 10 roller ball design
Shaft Length: 6.5" Overall Length: 7.5"
Long stem roller has a staked collar design versus machined collar on others.

25-10101

Truck Door 2" Nylon Roller 3" Shaft for Whiting Roll-up Doors

Zinc plated shaft 10 roller ball design
Shaft Length: 3" Overall Length: 3.75"
Cross Reference: W #3228 T #61424 T #70225
Box quantity: 25

25-01439

Truck Door 1/8" Stainless 5/16" Eye 115" for Roll-Up Doors Sold per Pair

Works with both Whiting and Todco doors
Aluminum eye ends are used on 5/16" eye cables
Cable size: 1/8"

6X20PO50

Devanco Loop 6' x 20' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

4X6PO50

Devanco Loop 4' x 6' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

41C3196

LiftMaster Antenna for Co-Axial Receiver

Wire antenna kit same as what is supplied in a 312 / 412 HMC

PRO-APTB-7553-U

Micanan 3/4HP 575V 3P Apartment Trolley Operator N1 Eyes Monitored ECB with Brake

Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
Low clearance design for apartment applications (9.5")
External radio control terminal strip
3-btn O/C/S control station Nema-1
Solenoid brake installed
Door speed 12" per second

.......more details

90_9210MO

LiftMaster Auxiliary Limit Switch Mod M62 Open Factory Installed

Provides a limit switch for use by others to control auxiliary devices such as lights heaters dock levelers or other equipment.
The switch can be used to turn on or off such equipment when the door is fully opened or fully closed.
When ordering specify whether the auxiliary switch is required on the OPEN or CLOSE side of the control enclosure.
A maximum of 2 switches per operator can be supplied.
Each switch is SPDT (form C) and is rated 10 amps at 125/250 VAC
Wire leads are provided on field install kits

.......more details

28002

Doorlec Flange Bearing F-360-13 5/8" (1.59cm) Hole

Fits model LJH/W

.295-5-1/4-LH-C

Torsion Spring .295 x 5-1/4" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .295 ID: 5-1/4" Length: 12 ft

.234_2"-LH

Torsion Spring .234 x 2" x 12ft LH Blue/White

Wire size: .234
Inside diameter: 2"
Length: 12 ft

DGPROX

Erone 1-Door Stand Alone Card Reader / Keypad

500 users (proximity badges and/or codes)
3 operating modes: - Mode 0: badge and code - Mode 1: badge only - Mode 2: badge or code
Audible & Visual feedback
1 request-to-exit input
Tamper switch
1 form C door relay output (3A/125V)

.......more details