Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Bottom
20449R

Genie Chain Glide Rear Housing Cover

  • Compatible with models: PCG400 PCG450 PCG500ML PCG600 PCG700ML PCG700FN GCG350L GCG350ML H2000C 1020L 2020L
  • Contains gear housing cover only
IRB-SH-SET

EMX Industries Steel Protective Hoods Only Grey Powder Coat Pair

  • Includes 2 hoods
  • Powder-coated steel construction
  • Compatible with EMX IRB-MON EMX IRB-4X safety photo beam sensors
  • Each hood fits easily over gate/garage door opener sensor
41D9044

LiftMaster Battery/ Logic Board Cover RJO

  • Compatible with 8500 and 8500W
CP-SH-34-MC3

Lynx Complete Limit Shaft Assembly #41 Chain

  • For trolley operator
106141

Marantec Shaft Adapter

2704.135.140

Whiting Roadside Torsion Spring 2-3/16" ID 14" Long

  • Torsion spring wire only
  • .135 wire size
E/1929/022

Automatic Systems Round Arm Ass'y 10' (BL229)

  • Used on the BL229 gate op.
STRUT-3-30'

Door Strut 3" Hemmed 30ft Long

  • Reinforcement bar 3"
12-3000

Flanged Bearing 1-1/4" x 1/8" **to extent of inventory

  • Fits SW470 gate operator
.192_2-3/16_60R

Spring Wire .192 x 2.188 x 60" CTD RAW RH

  • .192 x 2-3/16" x 12'
.25W8.2

Resistor 1/4 W 8.2K OHM

  • Dimensions (W X H X L) 6 X 15 X 3 CM
K75-13074

LiftMaster Straight and Curved Door Arm Kit APT

  • Compatible with LiftMaster® Model APT trolley Operator
CA-104-312

Continuous Angle 1-1/2" x 3-1/2" x 104" L Sold per Piece *** NLA

  • 12-ga angle
6X30PO50

Devanco Loop 6' x 30' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or sufaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
41D8260

LiftMaster Cover 8355W

  • A one piece LiftMaster® "Silver" Replacement Cover.
  • For use with LiftMaster® 8355W Series AC Belt Drive WiFi® Garage Door Openers
26117

Doorlec Limit Cam Retainer Plate

  • Fits Most Doorlec Commercial operators except Explosion-Proof Operators
  • Will not fit on waterproof operators with small electrical enclosure built before 1999
MSC330V72-BULK

Motor Start Capacitor 330V 72-86MF

CP-MO-34-123/1

Lynx Electric Motor 3/4 HP 115/230V 1 Ph

  • Electric motor only
MG020-B-4E-P/FT

Miller Edge Sensing Edge Black 4-Wire Monitored End Outlet Sold per Foot

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
3BX

Control Station Exterior Surface Mount O/C/S N4 Metal Enclosure

  • Metal Enclosure
  • Buttons aligned in a triangular pattern
  • H=4-3/8" W=4-1/8" D=2-5/8"
  • 2 NO contacts and 1 NC (stop)
  • Nema 3R 4 12
3BX
LM56A

LiftMaster Magnetic Proximity Reed Switch

  • Normally Open magnetic sealed reed switch; proximity switch
  • Used for overhead door contacts.
PL-A23-RPM-BRKT

Lynx RPM Reader Board Bracket Only

3709-4220

Strap 2" w/Ratchet & Double J-Hooks 20ft Long

  • Polyester strap 2" wide
  • Work load limit 3335 LBS
60-6560-A-YELLOW

Speed Bump Yellow 36" Econo Light Weight for Asphalt **** NLA

  • A standard speed bump system section includes (2) main pieces (2) endcaps x 5” long and (1) connector clip.
  • Main pieces may be added and connected to form larger units.
  • 36” long x 10.5” wide x 2” high (main piece)
  • EndCap: 5” Safety Snap On End Cap - sloped modular profile prevents tripping by pedestrians.
  • Yellow Plates: Each speed bump section is embedded with (6) yellow safety plates of weather resistant composite material for protection from salt freeze and thaw.
  • Can be used as a cable cover - bottom sides include 1” x 1½” channels for protecting temporary or permanent cables or hoses.
    • .......more details
CP-IDLER-ASY-MCBH

Lynx Front Idler Assembly Commercial MCBH

K21-38158

LiftMaster Current Sense Harness Kit 3PH L5

  • This is a Current Sense Harness (230/460/575V) Replacement Kit.
  • Compatible with various LiftMaster® 3 Phase Logic 5.0 Commercial Door Operators; manufactured after February 2016.
  • Complete replacement kit includes: (2) current sense harnesses of different lengths to accommodate all models.
  • Models manufactured before February 2016 DO NOT feature current sense technology.
  • We highly recommend replacing the existing boards with an updated Logic 5.0 system that utilizes current sense technology
  • Refer to the following replacement boards for compatible upgrades: K001D8395 1PH/3PH Logic Board for all L5 models K001D8397 3PH/L5 Power Board 230/460V
    • .......more details
ME117-M-BLK-U

Miller Edge 4-Wire Monitored Black Universal Outlet Sold by the Foot

  • Electromechanical slide in edge for 1" to 2" sectional doors.
  • Touch sensitive signaling allows for immediate stopping or reversing of motion. The ME117 is resistant to water flame and most common greases and oils.
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Installation manualSell sheet
109904

Amarr Snap Latch Supply Bag for 2" Thick Doors

  • Is needed when 105380: T-Handle Lock Kit for 2" thick doors is order or the lock won't work.
41D8198

LiftMaster End Panel with all Labels and Light Socket

  • End panel works with various models
7001-14-ANODIZED

Commercial Side & Top Weather-Strip 14' Long - Anodized 7001-AB

  • Anodized galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
7001-10-ANODIZED

Commercial Side & Top Weather-Strip 10' Long - Anodized 7001-AB

  • Anodized galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
PRO-GH-15011U-LH

Micanan 1.5 HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
CGH151L5-RH

LiftMaster Gearhead w/ Brake & Carwash Mod. 1-1/2 HP 115/230V 1P L5 - Right Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting except if a Mod is added
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
31118

Doorlec Sprocket 41B12-5/8" Plain Bore

  • Plain bore no keyway
MB-01012

Micanan Electric Motor for Pro LH only 1/2HP 575V 3PH

  • This will only work in the Pro LH operator.
7205

Whiting Balancer Bracket End - Roadside for Whiting Roll-Up Doors for #7176 Balancer

  • Steel construction
  • Plain finish
  • Whiting original
ME112-C3

Miller Edge L-Shaped PVC Mounting Channel Sold by the Foot

.192-134-R

Cut-to-Length Torsion Spring .192 x 1-3/4" Right Hand Wound Silver

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
HINGE-1214-PCG

Powdercoated Hinge #1/2 x 14 gauge Grey ** To Extent of Inventory

  • Heavy Duty 14 gauge offset hinge #1/2
  • Powdercoated Grey
ME120-BLK-2WIRE-E

Miller Edge Black 2-Wire End Outlet Sold per Foot

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
ME120-BLK-2WIRE-L

Miller Edge Black 2-Wire NM Left Hand Outlet Sold per Foot

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
EPC-1

Accessory Hardware Kit for Gate Track for 3-1/2" Pipe *** Price by Quote Only

  • Includes guides rollers & hardware
J505L5

LiftMaster Industrial-Duty Jackshaft 1/2 HP 575V 3Ph L5

  • Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
  • The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • J operators are attached to the door jackshaft to indirectly drive the door
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Security+ 2.0® safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you
K081C0168

LiftMaster Screw Drive Rack

  • Also known as: 081C0168 81C168
  • This replacement screw drive rack is not compatible with LiftMaster® Models 3130 or 3240
0/7530/248

Automatic Systems 5/8 Right Hand Rod End with Zerk

  • Used on the BL229 gate op.
SF514U-114-W

Spring Fitting 5-1/4" Winding Side Only for 1-1/4" shaft

  • Universal thread for use in either LH or RH wound springs.
  • Includes: (1) winding side only
TRACK-SET-2STD-10

2" Tracks Set 10'-0" Torsion 1-3/4" Door Clips for Wood Frame 12" Radius *** By quote only

ME123-2M-BLK-LH

Miller Edge Black LH 2-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
WorksheetInstallation manualSell sheet
ULTRA-DIN

EMX Industries DIN Rail Mount Vehicle Loop Detector

  • Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature
  • Easy to install and setup with the ULTRAMETER™ sensitivity display
  • Low current draw – green product
  • Easy identification of interference problems using the crosstalk and RFI interference display
  • Fits into small operator housings saving space size: 80 x 23 x 84 mm
  • 10 sensitivity settings
    • .......more details
MIRCU-02

Miller Edge Universal Non-Monitored Interface

  • Converts a monitored pulsed signal to a non-monitored normally open signal
  • Creates a Fail Safe signal; reports a fault when power is lost
  • Ideal for use with pre-2010 commercial door operators
Installation instructionsSell sheet
BRX10

GDI Brake Kit Brake Kit with Pull-rods; Axial

H14G04-BLACK

Hinge #4 x 14 gauge Black Powder Coated

  • Black powder coated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • Individually wrapped
12502

Doorlec Clutch Plate Aluminum 4" dia x 5/8" bore

  • Works with model LJ/LJH
E/BLOP/151

Automatic Systems Safety Edge for BL229 16'-5"

CAMPLATE001

Manaras Cam Plate GH Standard

E/BLOP/005

Automatic Systems Standard Tip Support Option

SPRING040

Manaras Disconnect Spring

12501

Doorlec Clutch Plate Aluminum 4" dia x 1" bore

  • Works with models EHJ and ETBH
SF375-W

Spring Fitting 3-3/4" Winding Side Only

  • Universal thread for use in either LH or RH wound springs.
  • Maximum wire size diameter: .4062".
  • Set screw installed: 3/8"-16 x 1-1/2" (2).
  • Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
  • Winding bar hole 5/8"
41A7278

LiftMaster Sprocket Kit 12-Tooth

  • Includes sprocket and screws
SPR41B44-1

Sprocket 41B44-1" shaft

SPRING001

Manaras Cam Guide Plate Spring

SABLOP/12X

Automatic Systems Red LED Lighting Module for Arm

BEARING006

Manaras Flange Sealed Bearing 5/8"

  • Flange sealed bearing for 5/8" shaft
2806.162.18

Whiting .162 x 2-3/16 x 18" Roadside with Cones

MX00128

Micanan Clutch Assembly for PRO-GOHD

WA10

NICE Red Adhesive Reflector Strips 24pcs/Pkg

12576

Doorlec Clutch Disc Fiber 4" dia.x 1" bore

  • Fits model ETBHW/ETHW
31355

Doorlec Sprocket 80B14

DHJ501L5-LH

LiftMaster Ind. Duty Hoist/Jackshaft Op. 1/2 HP 115/230 VAC Logic 5 Left Hand***Discontinued

  • Industrial-Duty Hoist/Jackshaft Operator with Internal Door Lock Sensor
  • Optimal for shopping mall applications with heavier rolling doors and grilles.
  • Provides a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Includes a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.
  • Industrial Ball Bearings on 1" Output Shaft
  • Second Floor-Level Disconnect for Manual Lifting in an Emergency
    • .......more details
BCSI-PM10

Pivin Drapeau Clutch Plate for BCSI Gate Operator ** Price by Quote Only

  • Friction Plate
MP00069

Micanan Jackshaft w/Aux Trolley Assembly Mod. 7ft High Door #41 Trolley Drive Chain

  • Provides an auxiliary trolley assembly where otherwise a jackshaft operator may be preferred
  • NOTE: Operator must be supplied with reverse limits
  • If purchasing for field install the limits on the operator would need to be reversed
MT22-GRAY-LH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot Gray

  • Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
CP-BRK-WALL

Lynx Wall Bracket Commercial Operators

GATE_RN3.5

Nylon Gate Roller for Cantilever Gate

K76-37667-2

LiftMaster Limit Box Kit

  • Compatible with model SL585 Slide Gate Operators.
H-0168

Autogate VBelt Banded B-66

  • New Style Double Reduction
3BXL

Control Station Exterior Surface Mount O/C/S N4 with Key Lockout

  • Metal Enclosure
  • Buttons aligned in a triangular pattern
  • H=4-3/8" W=4-1/8" D=2-5/8"
3BXL
SGP-321-1-230/1

Doorlec Gate Master 1 HP 230V 1 Phase with Heater and Lights in Cabinet

  • Post mount heavy-duty industrial slide gate operator
  • Max. gate weight: 2500 lbs
  • Gate travelling speed: 45 ft / minute
  • 175 watt heater included
2704.148_180

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

  • Most common torsion spring for cube trucks
  • Specs: .148 x 2-3/16" x 18" Long
  • For Curbside order part # 2705.148*180
MP-00010-U

Micanan Auxiliary Limit Switch for Monitored ECB

  • Installed to control auxiliary device
MD-00252

Micanan Connecting Link #50

PRO-GH-10021U-R

Micanan 1 HP 220V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
PRO-GH-10081U-R

Micanan 1 HP 208V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
PRO-GH-10081U-L

Micanan 1 HP 208V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
1005-1-1/2-14'

Aluminum Bottom Retainer U-Shaped 14' Long

  • For door thickness 1-1/2"
FEP100N

Pneumatic Safety Edge End Caps Included Sold by the Foot

  • Must specify if L-retainer is required
CGH751L5-LH

LiftMaster Gearhead w/ Brake & Carwash Mod. 3/4HP 115/230V 1P L5 - Left Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
28-32082

Truck Door 2" Horizontal Track with 8" Radius 120" Curbside (RH) for Whiting Roll-Up Doors

  • SPECS: Length: 120" Fits door sizes: Greater than 96" high
  • Cross Reference: W #11-2
  • Galvanized steel 14 gauge construction
  • Tongue and groove for proper alignment at joints
  • 8" radius
  • For use with 2" diameter steel or nylon rollers
    • .......more details
27020

Doorlec Electric Motor TEFC 1/3 HP 115/230V DC301

C-6X48-2-BLK

Thermal Window 6" x 48" for 2" Door Black

  • For 2" thick door
2806.148.200

Whiting .148 x 2-3/16 x 20" Roadside with Cones

MODKIT012B

Manaras Non-Reset Cycle Counter Kit - Boards

  • Field install kit
  • When activated counts one complete cycle of the door
  • Hardwired
MGH-6535-ECB-LH

Manaras 1.5 HP 600V 3P Jackshaft with Elect. Circuit Board Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
2500-2393

Linear Apex I Module

  • Older model prior to Jan 2016
C-6X48-134-BLK

Thermal Window 6" x 48" for 1-3/4" Door Black

  • For 1-3/4" thick door
MP00130

Micanan Up-Charge Track and #41 Chain for 14' h Door PRO-APTC

  • For 1/2 HP Micanan trolley operator PRO-APTC
203928

Decorative Locking L-Handle with 2 Keys

  • Black powder coated zinc with crinkle finish
  • 90 degree handle rotation
  • Blind mount installation 3.62" stem
  • Includes 2 keys and shaft clip
MG020-B-2E-03

Miller Edge Sensing Edge Black 2-Wire End Outlet 3 ft Long

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
MH00019

Micanan Precision Bearing 3/8" ID ** Replaced by MH00096