Devanco Canada - Get The Right Garage Door Opener‎ and Parts

12576

Doorlec Clutch Disc Fiber 4" dia.x 1" bore

Fits model ETBHW/ETHW

SF175-S

Spring Fitting 1-3/4" Stationary Side Only 1" shaft

MT22-MON-GRY-LH

Miller Edge 4-Wire Monitored Pressure Sensitive Edge Gray Sold per Foot

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

DOC-6000

Atlas Door Operator Board

The Atlas board has been discontinued the Lynx 6000 is a direct replaceement

L-14-50-0-D

Cable Tie Standard 50 LB Black 14" Nylon 500/pkg

Ultraviolet Resistant
Length: 14.56" / Width: .180" / Thickness: .052" / Diameter: 4.125"
Low insertion and pull through force
Advanced pawl and teeth design
Angled tail provides quicker initial insertion alignment
Tail finger grips allow easier handling and tightening

.......more details

PRO-PL-7553U

Micanan Wall Mount Control Panel 3/4HP 575V Monitored ECB

If PBS on cover required an additional charge will apply
If panel not ordered with an operator an additional charge will apply
Id fusible disconnect required additional charges will apply

K75-32463

LiftMaster Clutch Kit for SL595U

Compatible with model SL595U Slide Gate Operators

PS12D2A

LiftMaster Passport Power Supply Plug-In 12VDC 2A (02A1699-1/ ST122A)

Same as #002A1699-1

EP2982-NL

Exhaust Port 4" non latching short barrel *** To Extent of Inventory

4" inside diameter 1/4" sleeve
Includes fasteners & gaskets.
Polished aluminum finish.

41D8859

LiftMaster Cover 8550WL WLED

Burgundy Replacement Cover.
This one piece cover is compatible with various LiftMaster® Lock Capable Garage Door Openers Powered by myQ®; manufactured after 2017

41D9202

LiftMaster End Panel Driver Board ** Discontinued

041D9202 is a Front End Panel with LED Light Connector/Driver Board Replacement Kit.
For use with LiftMaster® and Chamberlain® Residential Garage Door Openers; manufactured after 2018.
Compatible with the WLED model

050DCTWFLK

LiftMaster Receiver Logic Board DC. WiFi Lock Capable Sec+ 2.0 ***replaced by 050DCTBFLK***

This is 315MHz Security+ 2.0® Lock Capable Receiver Logic Board featuring Wi-Fi® and powered by myQ®.
For use with various LiftMaster® DC Chain or Belt Drive Garage Door Opener models; manufactured after 2017 only.
The unit will feature a yellow learn button and two lock terminals

K75-50932

LiftMaster Crank Housing Kit - Hand Crank Not Incl. **DISCONTINUED

SL3000 new style hand crank pocket to store hand crank (crank sold separately)

FEP100N

Pneumatic Safety Edge End Caps Included Sold by the Foot

Must specify if L-retainer is required

2376.177_25.900

Whiting Torsion assembly .177 wire size 25" spring length 90" shaft

2500-2393

Linear Apex I Module

Older model prior to Jan 2016

C-6X48-134-BLK

Thermal Window 6" x 48" for 1-3/4" Door Black

For 1-3/4" thick door

PRO-APTC-5053-U

Micanan 1/2HP 575V 3P Apartment Trolley Op. Photo Eyes Monitored ECB

Low clearance design for APT applications (8.5")
Door speed: 7" per second
N-4 Micanan compatible monitored photocells included
Monitored board
Side access hinged cover for easy access to controls
Three button open-close-stop control station Nema-1

.......more details

Installation manual

TRMC38E

Telco Light Curtain Bracket 4/pkg

33102

Doorlec Overload 1.20 to 2.00 Amps

203928

Decorative Locking L-Handle with 2 Keys

Black powder coated zinc with crinkle finish
90 degree handle rotation
Blind mount installation 3.62" stem
Includes 2 keys and shaft clip

IRB-TX

EMX Industries Transmitter Board Only for IRB-4X *** No Longer Available

PPLK1

LiftMaster Passport Lite 1-Button Mini Remote with Sec+ 2.0 Technology

Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators

HCT10

LiftMaster HCTDCU Rail Only for 9'6" Door

Yellow zinc dichromate premium rail finish offers maximum rust protection in open-air environments.
Heavy-duty 12-gauge C channel corrosion resistant steel track.
This DOES NOT include the head unit

GOFF-G2-LITE-3000

Goff High Performance Door Made to Order

Custom made to spec

ARMP5

LiftMaster DC Power Supply for Intercom/Maglock *** to extent of inventory

MD-00348

Sprocket 50B26 x 1" 1/4" KW 2SS

PRO-GH-10011U-L

Micanan 1 HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

40W33A

LiftMaster Solar Kit 24V 33AH for Gate Operator

Charges the gate access system battery using solar power
Ideal for remote and sunny areas without access to an AC outlet
Replaces the need for gate access system transformer
Can be mounted to almost any fence gate or post
Mounting bracket and hardware included
Contains (2) SOLPNL20W12V solar panels

.......more details

MP00106

Micanan Warning Light Red/Green Remote Mount Box

620-100990

Linear Heater Kit Assembly 230V Cage Style

Cage style heater is suited for large post mount operators (HSLG GSLG VS-GSLG SWG VS-SWG)

LDCO850

Linear 800 Newton Smart DC Powered Garage Door Opener spott Wi-Fi Accept Both Belt or Chain Rail

The energy-efficient DC-powered operator that runs at an AC-equivalent speed.
DC drive motor with soft-start and soft-stop for smooth quiet long-term reliable performance.
Optional Battery Backup available for added peace of mind. Sold separately
Low-power standby mode dramatically reduces energy consumption
Supplies 800 Newtons of lifting force for heavy doors
Compatible with belt-drive or chain-drive T or I beam rails up to 10'

.......more details

Remote compatibility chart

MAG-3

Magnetic Accessories Kit 3-Piece Combo

The MagTool clipboard tape gun and box all come with an integral 100lb. magnet which allows them to be easily stuck and removed from a metal surface.

PRO-GH-7583U-L

Micanan 3/4HP 208V 3P Gearhead Operator N1 Eyes Monitored ECB Left Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

218757

Torque Force Spring Failure Device 1" Shaft Left Hand Side DT0054

For springs 2" up to 6"
This device can be applied on Industrial OH doors that are manual or motor operated
Must be installed on a keyed shaft

PRO-GH-5083U-L

Micanan 1/2HP 208V 3P Gearhead Operator N1 Eyes Monitored ECB Left Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PRO-HHD-10083U-R

Micanan 1 HP 208V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

1 HP208V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn o/s/c (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

Specification Sheet

MOTOR281

Manaras Electric Motor TEFC 1 HP 208/480V 3PH for N4/12 Applications

Electric motor only- not wired
Continuous duty base mount 56Z

PRO-H-5053-E-LH

Micanan 1/2HP 575V 3P Hoist Operator NM ECB No Eyes Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Solenoid brake OPTIONAL
Non-monitored board NO photoeyes

PRO-H-5023-U-RH

Micanan 1/2HP 230V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL
On-Board receiver holds up to 20 transmitters

821LMB

LiftMaster MyQ Garage Universal Smartphone Garage Door Controller Second Generation *** To extent of Inventory. Repl 821LMC-S

Enables smartphone control of most major brands of garage door opener with photoeyes.
Includes Wi-Fi hub and door sensor

Sell sheet Brochure

PRO-H-5081-U-LH

Micanan 1/2HP 208V 1P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL
On-Board receiver holds up to 20 transmitters

PRO-J-10053-U-RH

Micanan 1HP 575V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

CP-SH-34-1712-EXP

Lynx Clutch Shaft Assembly for Explosion-Proof HDC Operators

Modified for explosion-proof operators
3/4" x 22 x 3-1/2" thread

MDT-1B

Linear 1-Channel Visor Transmitter MegaCode Block Coded 318 MHz

Compatible with all Linear access receivers and controllers
Superior transmission range
Unique ”Extra” top button
High visibility operate LED
Visor clip included
Sold in lots of 10

.......more details

Programming instructions

MK-00679

Micanan Plastic Shoulder for Antenna Connector

MK-00645

Micanan Plug-In Harness for External Radio Control 3-Wire

MK-00024

Micanan Single Limit Switch AT

MK-00142

Micanan Transformer 115V-24V-50VA

MM-00295

Micanan Wall Mounting Plate (Reducer 120)

MV-00027

Micanan 110V Commercial Receiver CR32-110V

A transformer 110/24V (MK00030) is supplied separately for the 110V version

MV-00018

Micanan Key Switch ON/OFF Nema 4 Surface Mount

HAML-MOUNTING-BRKT

GDI Side Mounting Bracket N/C When Ordered w/Operator

ME110-C

Miller Edge PVC Mounting Channel Sold by the Foot

7/8" length

ME110-2W-BLK-R

Miller Edge 2-Wire Black Right Hand Outlet 7/8" wide x 3/4" high Sold by the Foot

Electromechanical slide in edge for counter shutters rolling doors and barrier arm applications.
Touch sensitive signaling that allows for immediate stopping and reversing of motion.
Temperature range -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet

ME110-2W-BLK-L

Miller Edge 2-Wire Black Left Hand Outlet 7/8" wide x 3/4" high Sold by the Foot

Electromechanical pressure sensitive edge for counter shutters rolling doors and barrier arm applications.
Touch sensitive signaling that allows for immediate stopping and reversing of motion.
Temperature range -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration.

.......more details

Worksheet

PRO-J-10021-U-LH

Micanan 1HP 230V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

12119

Doorlec Commercial Aluminum Sliding Carriage with Teflon Insert

Works on all Doorlec trolley operators

PRO-J-10011-U-LH

Micanan 1HP 115V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Installation Manual (EN) Specification Sheet

.421-6-L

Cut-to-Length Torsion Spring .421 x 6" Left Hand Wound Gold

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

.421-334-L

Cut-to-Length Torsion Spring .421 x 3-3/4" Left Hand Wound Gold

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-375-INSTALLED

.343-258-R

Cut-to-Length Torsion Spring .343 x 2-5/8" Right Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

PRO-J-7553-U-LH

Micanan 3/4HP 575V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

BOLLARD_4'

Bollard 6" Dia. x 1/4" x 48" High Capped (w) Base Yellow Powder Coat

6" Diameter 1/4" Steel Wall 48" High Base Plate is 10" x 10" x 1/4" Thick 5/8" Holes for Mounting Powder Coated Yellow

2996.3

Truck Door 2" Steel Roller 5" Long Stem Enclosed Bearing for Whiting Roll-Up Doors

A Whiting original

ME117-C7

Miller Edge PVC Mounting Channel Sold by the Foot

PRO-J-7521-U-RH

Micanan 3/4HP 230V 1P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

PRO-J-5043-U-RH

Micanan 1/2HP 460V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

PRO-J-5043-U-LH

Micanan 1/2HP 460V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

PRO-GT-15011-U

Micanan 1-1/2HP 115V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

On-Board receiver holds up to 20 transmitters

PRO-GT-7523-U

Micanan 3/4HP 230V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-7583-U

Micanan 3/4HP 208V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-5043-U

Micanan 1/2HP 460V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-APTB-7553-U

Micanan 3/4HP 575V 3P Apartment Trolley Operator N1 Eyes Monitored ECB with Brake

Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
Low clearance design for apartment applications (9.5")
External radio control terminal strip
3-btn O/C/S control station Nema-1
Solenoid brake installed
Door speed 12" per second

.......more details

PRO-APTB-7583-U

Micanan 3/4HP 208V 3P Apartment Trolley Operator N1 Eyes Monitored ECB with Brake

Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
Low clearance design for apartment applications (9.5")
External radio control terminal strip
3-btn O/C/S control station Nema-1
Solenoid brake installed
Door speed 12" per second

.......more details

PRO-APT-7521-U

Micanan 3/4HP 230V 1P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board

PRO-T-5011-U

Micanan 1/2HP 115V 1P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

60-7248-81111

Wheel Chock Safety Pkg incl'd: orange urethane chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) 811-11 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
Not For Use on Ice
High Visibility
Orange Urethane
Size: 11" wide x 8" long x 8" high

60-7248-689U

Wheel Chock Safety Pkg incl'd: pyramid chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) 68-9U Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
Handles for chain fastening
Long Lasting 80 Durometer rubber
Size: 8" wide x 9" long x 6" high

68-9U

Wheel Chock 68-9U Pyramid Rubber with U Handle

Handles for chain fastening
Long Lasting 80 Durometer rubber
Size: 8" wide x 9" long x 6" high

60-7248-CBI29

Wheel Chock Safety Pkg incl'd: cast ductile iron wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) CBI-29 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
Made from Cast Ductile Iron for Impressive Strength
Painted Blue for good Visibility
Completely Reversible for Simple Use
Size: 8" wide x 12" long x 9" high

60-7248-CC07

Wheel Chock Safety Pkg incl'd: cast alum. alloy chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) CC-07 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
Reversible Chock Design
One-Piece Cast Construction
Cast Aluminum Alloy
Size: 10" Base x 9" high x 6-1/4" wide

CC-07

Wheel Chock CC-07 Cast Aluminum Alloy

Reversible Chock Design
One-Piece Cast Construction
Cast Aluminum Alloy
Size: 10" Base x 9" high x 6-1/4" wide

60-7248-IC10

Wheel Chock Safety Pkg incl'd: yellow formed steel chock w "tooth" like bottom wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) IC-10 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
"Tooth" Like Bottom Grips Icy/Slippery Ground Surface
Powder Coated Yellow for High Visibility
Formed Steel
Size: 8" wide x10-1/2" long x 9-1/4" high

PBC-3

Push Button Control Station 3-Btn O/C/S Stainless Steel Face Plate Nema 1 Flush Mount

Single gang box
Face plate: 4-1/4" H x 2-3/4" W Back Box: 4" H x 2" W

42GRR-9001

Allen Bradley Series 9000 Photoelectric Sensor Thru-Beam Receiver Unit

nput: 20-40VAC 10-55VDC 4VA

MK-00071

Micanan Transformer 575V-115V-50VA (MK00161)

K10-33850

LiftMaster E-Box Cover MH MJ MT

MS-00002

Micanan Trolley Track Set 12 Ga. 9'6" (for 7' h. door) Includes 2 Angles Only

Set includes 2 tracks only
Chain NOT included

DM120-125-T/FORCE

Cable Drum High Lift 120" D575-120-1-1/4" Pair Torque Force

120" High Lift aluminum die cast alloy cable drums.
3/8"-16 x 2" hardened cup point set screws installed with red heads.
Pair includes: (1) LH and (1) RH. Color coded: Red=LH and Black=RH.
Maximum high lift: 120".
Maximum door height: 144" + High Lift.
Rated lift per drum: 500 lbs.

.......more details

CAPXL

LiftMaster Connected Access Portal High Capacity

Connected Access Portal High Capacity Cloud-based access control for residential communities.
Capacities: 4 Controlled Gates/Doors
Wireless Link for up to 8 LiftMaster® Operators
4 to 8 Digit Entry Codes
4 to 6 Digit Directory Codes
50000 Local Resident Capacity

.......more details

31D380

LiftMaster Sprocket Cover

Sprocket Cover Replacement Kit for use with various LiftMaster® and Chamberlain® Chain Drive Garage Door Openers

SRB-6

Standard Riser Bracket 6" Above Dock

Standard 6" Riser Bracket for 6" Above Dock Door or Less
Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information

748

Fasteners Self Drill & Tap Tek Screw 1/4-20 x 3/4" (#2PT) 1000/Box

Indented Hex Washer Head
7/16" Head
Max RPM = 2000
#2 point = shorter cutting edge (more thread)

LB1212-24

Laminated Bumper Standard Black 12" L x 24" W 12" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LVB1024-11

Laminated Bumper Black 10" Projection Vertical Installation 24" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

LB1012-14

Laminated Bumper Standard Black 12" x 14" 10" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB1010-36

Laminated Bumper Standard Black 10" x 36" 10" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB910-14

Laminated Bumper Standard Black 10" x 14" 9" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LVB436-11SF

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 36" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details


User Name:
Password:
Remember Me:

	Forgot your password
Request a Login