Devanco Canada - Get The Right Garage Door Opener‎ and Parts

.312_5-1/4"-RH

Torsion Spring .312 x 5-1/4" x 12ft RH Yellow

Wire size: .312
Inside diameter: 5-1/4"
Length: 12 ft

.312_3-3/4"-RH

Torsion Spring .312 x 3-3/4" x 12ft RHW Yellow

Wire size: .312
Inside diameter: 3-3/4"
Length: 12 ft

.306_3-3/4"-RH

Torsion Spring .306 x 3-3/4" x 12ft RH Red

Wire size: .306
Inside diameter: 3-3/4"
Length: 12 ft

41A4373A

LiftMaster Safety Sensor Kit 1993-1998 ** Replaced by 041-0136 & 041-0155-000

For LiftMaster Chamberlain & Sears openers built from 1993-1998
Kit includes: Saftey sensors 24" wire and gel connectors
Replacement: 041-0136 with the 041-0155-000 brackets

12561

Doorlec Brake Drum 4" Diameter

Fits all Doorlec operators equipped with brake shoes

12562

Doorlec Lower Brake Shoe - Left

Fits on all Doorlec operators equipped with brake shoes
Use with drum #12561

17310

Doorlec DC-3000T2 2-btn Transmitter 313 MHz

One block of 10 dip-switches for programming
Will activate 2 Doorlec 17307 receivers (DC-3000R)
Includes visor clip and 9V battery

Programming Instructions

MK00641

Micanan Smart 10.0 Full Feature Circuit Board Monitored with 5 Relays

For 1/3 1/2 and 3/4 Hp - 110/220V 1p 230V 3p
Board has P1 & P2 terminals
Up to 20 transmitters can be programmed

Instructions Manual

MJ00014

Micanan Brake Shoe and Drum Assembly for Gearhead

For Micanan gearhead models: GH GHC GSD
Assembly includes both right & left shoe and the drum

MJ00002

Micanan Brake Shoe - Right **No Longer Available**

Only available in complete kit # MJ00013 or MJ00014 for PRO-GH

MJ00005

Micanan Clutch Pad 3/4" ID

Used on all Micanan commercial operators & PRO-GO gate operator
3/4" inside diameter 4" outside diameter

CP-BRAKE-ASSBLY

Lynx Brake Shoe Assembly

Brake shoes for all Lynx operators
Assembly includes the shoes
release spring and bolt included

CP-SW-AT

Lynx Single Limit Switch

PL-BO7-CRGSLIDE

Lynx Carriage Assembly (Nylon) ** No Longer Available

Proline / Lynx 455 Plus trolley slide assembly
For operators built from 2000 +

PL-A03-NEW-BRD

Lynx Replacement Logic Board New Version

New version board works on operators with a red cover
Replacement logic board for Napoleon/Lynx Proline garage door opener
For openers built June 2008 or later (date code 0806 or newer)
This board does not have a transformer.

S2TR2641E2

Erone 2-Channel Mini Transmitter 433MHz

Open/Close remote for 2 doors
Palm-size transmitters 83 x 48 x 16m (3.25 x 1.9 x 0.6in)
Learn button programming
Ergonomic stylish design Rugged & durable
Light grey base with yellow buttons
unobstructed range: 820 ft (250m)

.......more details

Sell Sheet Brochure Wireless System Chart

SEL2641R433-IP

Erone 2-Relay Stand Alone Receiver Pulse/Latch or Delayed Relay Output 433MHz

Up to 85 transmitter keys
1 NO relay + 1 NO/NC relay (24VA)
Self-learning memorization
Standard pulse latched or timed relay output
Power requirements: 12/24Vac/dc
Dimensions: 105 x 45 x 28mm (4.3 x 1.75 x 1.1in)

.......more details

Instruction Manual Sell Sheet Wireless System Chart

OPH-6533-ECB

Manaras Opera-H 3/4HP 600V 3Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

Installation Manual Sell Sheet

LIMIT006

Manaras Single Micro Limit Switch with Flat Lever

Fits old medium-duty Manaras operators such as MDJ
SPDT - Cherry

Limit Switch Chart

DISCONNECT001

Manaras Floor Level Disconnect Lever

RADIO-47

Manaras MCT-1 3-btn O/C/S transmitter 1 door **Replaced by RADIO-EM932

Open/Close/Stop remote for 1 door
Comes with LED battery life indicator
9V battery included
Can be wall or post mounted
Must be used with MCR series receivers

Programming Instructions

STATION078

Manaras 3-btn Push-Button Control Station Nema 4/12

2 N/O contacts and 1 N/C contact for stop.
Surface mount.

Sell sheet

2705.162_180

Whiting Curbside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

Most common torsion spring for cube trucks
Specs: .162 x 2-3/16" x 18" Long
For Roadside order part # 2704.162*180

5377.115

Whiting Side Seals 1/2" Track Spacing 115" Long

Most common side seal for Whiting Dry Freight doors.
115 inches will fit almost every size door.

2704.162_180

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

Most common torsion spring for cube trucks
Specs: .162 x 2-3/16" x 18" Long
For Curbside order part # 2705.162*180

109710

Linear 4-Channel Multi-Code Visor Transmitter 310 MHz

Open/Close remote for 4 doors
Compatible with 310 MHz Stanley and Multi-Code receivers
Supplied with visor clip
Easy access to battery and coding switches - 10 dip switches
Power: 9-volt battery
Codes: 512 per channel (set by dip switches)

.......more details

Programming Instructions

1336.4

Whiting Roadside Top Panel Closure Bracket for 8" radius track

110554

Allstar MVP 1-Door O/C/S Receiver 318 MHz ***Replaced by P-831RE

Three channels - three relay outputs
8-wire operator connection
Wire whip antenna with "F" connector
Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
Power: 24 VAC/VDC
Codes: 19683

.......more details

Programming Instructions

111645

Allstar MVP 1-Channel 4-Wire Gate Receiver 318 MHz ***Replaced by P-9931R-4F

One channel
4-wire operator connection
Wire whip antenna with "F" connector
Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
Power: 24 VAC/VDC
Codes: 19683

.......more details

Programming Instructions

733T

Allstar 3-btn 3-Door O/C/S Transmitter 107477 318 MHz *** Replaced by P-733T

Open/Close/Stop remote for 3 doors
Compatible with 3-channel Allstar and MVP receivers
Stationary mounting
Easy access to battery and coding switch
Power: 9-volt battery
Codes: 6561 (set by eight trinary dip switches)

.......more details

Programming Instructions

535T

Allstar 3-btn 27-Door O/C/S Transmitter 107475 318 MHz ***Replaced by P-535T

Open/Close/Stop remote for 27 doors
Compatible with 3-channel Allstar and MVP receivers
Stationary mounting
Easy access to battery and coding switch
Power: 9-volt battery
Codes: 6561 (set by eight trinary dip switches)

.......more details

Programming Instructions

41A2816

Jobber Drive Gear for Chamberlain Sears LiftMaster residential operators

Drive gear for Chamberlain / LiftMaster / Sears residential garage door openers built 1984 +
This is an excellent quality aftermarket product

217436

Linear Drive Sprocket - Chain (HCT)

HAE00049

Linear Drive Sprocket Holder and Belt Clamp

HAE00047

Linear Complete Gear Set with Grease

Set includes: Helical gear worm gears and grease
Helical gear measures 2-7/8" diameter

219109

Capacitor 1/3 HP 43-53 MFD 250V

For LDO33 only

15.1

Whiting Truck Door Stainless Steel Center Hinge

200BL

2" Light Brush Insert 6ft Long

Polypropylene bristles
Same as model MS1703

300BL

3" Light Brush Insert 6ft Long

Polypropylene bristles
Same as model MS1705

4009-12FT

Aluminum Retainer only for Light Brush 12' Long Reverse Angle

For reverse angle rolling steel doors.
For use with Light Brush or Vinyl Insert.

4005-8FT

Aluminum Retainer only for Heavy Brush 8' Long 180 degree

For angle application (180 degree)
For use with Heavy Brush

4007-6FT

Aluminum Retainer only for Light Brush 90 degree***Actual Length 6'1"

For angle application (90 degree).
For use with Light Brush or Vinyl Insert.

4001-12FT

Aluminum Retainer only for Light Brush 12' Long 45 degree

For angle application (45 degree)
For use with Light Brush or Vinyl Insert.

1009-1-3/8"

Bottom Nail-On for Wood Door Heavy Duty per foot

For 1-3/8" commercial doors.
For heavier applications than the 1009-1-3/4".
Provides a better cushion.
Color: Black

1016-ADHESIVE

Adhesive for Storm Shield 6oz tube

For use with 1016

Safety data sheet

1006-2-14'

Rigid Vinyl Bottom Retainer U-Shaped 14' Long

Black with flexible fin to touch door face.
For door thickness 2"

1006-1-3/4-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

Black with flexible fin to touch door face.
For door thickness 1-3/4"

1005-1-3/4-16'

Aluminum Bottom Retainer U-Shaped

For door thickness 1-3/4" • DIE # ES18191

DT4A

Linear 4-btn Delta3 Transmitter 310 MHz (DNT00027B)

Activates one four-channel receiver (DR4) two 2-channel receivers (DR2) or four single-channel receivers (DR DRQP or DRM).
Can also be used as remote UP DOWN STOP control for commercial operators with DR-4 receiver.
8-dip switch 64 selectable codes
Same as: DNT00027B or DT4A
310 MHz frequency

Programming Instructions

1003-1-5/8-8'

Aluminum Bottom Retainer L-Shaped

For 1-5/8" thick doors.

1104-10FT-DK-BR

Residential Side & Top PVC Weather-Strip with cap 10' Long - Commercial Brown (DN)

Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-9FT-DK-BRN

Residential Side & Top PVC Weather-Strip with cap 9' Long - Commercial Brown (DN)

Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-8FT-BROWN

Residential Side & Top PVC Weather-Strip with cap 8' Long - Brown (N)

Brown rigid vinyl retainer with brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

18-RWB-PAIR

Winding Bars Round 18" Set of 2

Cold rolled hardened steel.
Machined to 7/16" at one end with 1/2" outside dia. on the other.
Sold as a pair.

9002-24FT

Commercial Side & Top PVC Weather-Strip Clip-On 24' Long *** To Extent of Inventory

Black rigid vinyl retainer with black flexible vinyl insert.
Reverse angle clip-on vinyl retainer.
Side use: clips onto steel jamb.
Also for residential use.

1104-16FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 16' Long - Cream (C)

Cream rigid vinyl retainer with cream flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Almond

1104-7FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 7' Long - Cream (C)

Cream rigid vinyl retainer with cream flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Almond

1104-12FT-SAND

Residential Side & Top PVC Weather-Strip with cap 12' Long - Sandstone (D)

Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Taupe

7001-10-WHITE

Commercial Side & Top Weather-Strip 10' Long - White (W)

White galvanized steel with white dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

1001-10-BLACK

Commercial Side & Top Weather-Strip 10' Long - Black

Aluminum retainer with black dual-fin vinyl

32-48-180

Extension Spring 8' Door - 180 lbs Gold ** Replaced by 27-48-180

Double - Loop
32" long 48" stretch 180 lb load
Springs sold individually

Spec Sheet

32-48-80

Extension Spring 8' Door - 80 lbs Gold ** check for availability

Double - Loop
32" long 48" stretch 80 lb load
Springs sold individually

25-42-270

Extension Spring 7' Door - 270 lbs Orange ** check for availability

Double - Loop
25" long 42" stretch 270 lb load
Sold individually

Spec Sheet

25-42-220

Extension Spring 7' Door - 220 lbs Green w/ clip

Double - Loop
25" long 42" stretch 220 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

25-42-180

Extension Spring 7' Door - 180 lbs Gold

Double - Loop
25" long 42" stretch 180 lb load
Sold individually
Rated for 10000 cycles
Same as part number 118

Spec Sheet

95-00116

Truck Door Rivet 1-1/4" Stainless Steel ** To Extent of Inventoy

Stainless steel construction
Round head design
Cross Reference: T #89217-0040

28-32071

Truck Door 2" Horizontal Track with 8" Radius 107" Roadside (LH) for Whiting Roll-Up Doors

SPECS: Length: 107" Fits door sizes: Up to 96" high
Cross Reference: W #11-3
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints
8" radius
For use with 2" diameter steel or nylon rollers

.......more details

28-02101

Truck Door 2" Vertical Track and Right Angle Assembly 106.5" Roadside (LH) for Whiting Roll-Up Doors

SPECS: Length: 106.5" Fits door sizes: 91" - 100" high
Assembly includes: Right angle mounting track Vertical track and Torsion bracket
Cross Reference: W #2275-2
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints

27-20500

Truck Door Bearing and Bracket Plate Assembly for Roll-Up Doors

Zinc plated finish
Bearing with 1" bore pressed in a football style flanged retainer
Factory installation assures proper bearing alignment
Cross reference: T #51038 W #4033 320000

27-20127

Truck Door Spring Spacer 35" long for Whiting Roll-Up Doors

Extruded PVC construction with zinc plated thrust washer.
Cross Reference: 2471

26-94325

Truck Door Bottom Panel with Seal (15" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
Comes only with bottom retainer and seal (installed)

26-94323

Truck Door Bottom Panel with Seal (13" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
Comes only with bottom retainer and seal (installed)

26-40001

Truck Door Bottom Seal Standard 98" Long for Todco Roll-Up Doors

Extruded from long lasting rubber
Prevents dirt and moisture from entering cargo bay.
Cross Reference: T #80840 W #3257 610200

26-40018

Truck Door Bottom L-Retainer 84" Long for Todco Roll-Up Doors

Galvanized steel construction for extra strength and corrosion resistance.
Fits both standard and heavy-duty bottom seals.
Pre-punched holes for added convenience
Cross Reference: T #61191 W #4034 260000

26-14325

Truck Door Bottom Panel with Seal (15" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish
Comes only with bottom retainer and seal (installed)

DM32

Cable Drum Standard Lift 32' 800-32 Pair

32' Standard Lift aluminum die cast alloy for a 1" solid shaft. Pair includes: (1) LH and (1) RH. Color coded: Red=LH and Black=RH
Max. Door Height: 32'-1".
Rated Lift per Drum: 1000 lbs
Max. Cable Diameter: 1/4".
Mounting: 1" solid shaft with 1/4" keyway
Cross Reference: D800-384 DNS 402-32 OMI 2300

.......more details

25E10051

Truck Door Center Hinge Black E-coat finish for Whiting Roll-Up Doors

Steel construction Black E-coat finish
Cross Reference: W #15 T #70159
Box quantity: 50

Z9997

Hand Chain 25' for Manual Chain Hoists

Not SAE rated.
Designed for approx. 35 lbs

R5999

Shaft Collar 1" with 1 Set Screw

Set Screw: 5/16 x 18

R5998

Shaft Collar 1-1/4" OD 2" 2 Set Screws 3/8-16

With 2 set screws

DM28VL-125

Cable Drum Vertical Lift 28' 1350-28 (1-1/4") Pair

28' Vertical Lift aluminum die cast alloy for 1-1/4" shaft.
3/8"-16 x2" hardened cup point set screws installed with red heads. -
Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH.
Max. Door Height: 28'-1".
Rated Lift per Drum: 1100 lbs.
Max. Cable Diameter: 1/4".

.......more details

DM120

Cable Drum High Lift 120" 5750-120 Pair

120" High Lift aluminum die cast alloy cable drums.
3/8"-16 x 2" hardened cup point set screws installed with red heads.
Pair includes: (1) LH and (1) RH. Color coded: Red=LH and Black=RH.
Maximum high lift: 120".
Maximum door height: 144" + High Lift.
Rated lift per drum: 500 lbs.

.......more details

SF258

Spring Fitting 2-5/8" Pair

Universal thread for use in either LH or RH wound springs.
Pair includes: (1) winding & (1) stationary.
Maximum wire size diameter: .3310".
Set screw installed: 3/8"-16 x 1" (2).
Mounting: 1" tube or solid shaft - min. 1/2 turns on set screws.
Winding bar hole 1/2"

.......more details

H11G10

Hinge #10 x 11 gauge

11 gauge # 10 hinge - 0.92 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

H11G07

Hinge #7 x 11 gauge

11 gauge # 7 hinge - 0.83 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

Z9002

Pusher Spring - 15" Sold as a Pair

Pusher spring 15" long with 6" travel. Sold as a pair

R5201

Cast Iron Pulley 3"

Bored for 3/8" diameter bolt
Cable diameter: 1/8"
Cast iron pulley mounted on two pressed sealed bearings.
Radial Load: 400lb

HD3080

Step Lift Plate Curled

Step Plate/Lift Handle

41A5034

LiftMaster Snappy Beam Sensors ** DISCONTINUED USE 041-0136

Will work on all LiftMaster residential openers equipped with safety beams
For newer models 1999-current will fit on existing brackets
For older models 1993-1999 new brackets #41A5266-1 are required or use old style safety beams #41A4373A
New Gen ( 2021+) operators will have new snappy beam sensors part number 041-0136
Not compatible with the New Gen (2021+) 041-0155 snappy beam brackets

25-10100

Truck Door 1" Steel Roller 2.5" Shaft Length for Todco Roll-Up Doors

Zinc plated Hardened shaft and raceways
Seven roller ball design
Cross Reference: T #61174 T #69162 W #4026 W #4027 291000
Box quantity: 25

25-01435

Truck Door Stainless Cables 110" 5/16 eye 7x19 Pair for Roll-Up Doors

Works with both Whiting and Todco doors
Aluminum eye ends are used (only on 5/16" eye cables)
Cable size: 1/8"

CUSTOM4X8PO

Devanco Loop 4'x8' rigid-pvc pave-over

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

4X10SC50

Devanco Loop 4' x 10' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

6X12SC50

Devanco Loop 6' x 12' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

CADROLL

3" Stainless Steel Carwash Roller 7" Stem ** To Extent of Inventory

Stainless Steel Shaft no bearing design
Roller made from NMW plastic which is more wear resistant that steel because it causes less friction
Rated for 200 000 cycles
Pound Load: 145 lbs