Devanco Canada - Get The Right Garage Door Opener‎ and Parts

CAR2U-RPTR

LiftMaster Lear CAR2U Repeater *** No Longer Available

� The Lear Car2U® repeater kit allows compatibility between new Chamberlain® Sears Craftsman® or LiftMaster® Garage Door Openers and the Car2U system in your vehicle. · The Car2U system is a garage door opener integrated into your vehicle. · The Lear Car2U kit contains a transmitter and a detailed instruction manual.

Programming Instructions

MOFT20-M14-8

Carlo Gavazzi Photoelectric Sensor Thru-Beam Transmitter

Maximum sensing distance is 20 meters
11-pin
Waterproof for harsh environment i.e. water dust steam etc.
To be used with amplifier series S142.
Supplied with 15 m of shielded cable.
For receiver unit order part no. MOFR-M14-8.

.......more details

Installation Manual

1104-10FT-CHARC

Residential Side & Top PVC Weather-Strip with cap 10' Long - Charcoal (H)

Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

G90-503000

LiftMaster Non-Resettable Counter 24VAC (50-12862)

Increases one number each time current is applied
Connects to the 24 volts of contactor coil
Simple 2-wire connection
Same as 50-12862

SG10-24RG-LED

TriLite Stop & Go Traffic Signal 24V LED Yellow Housing

Red and Green LED traffic light
Approx. size: 11-1/2" High x 6-1/2" Wide x 4" Deep
24 volt DC input voltage only
Long lasting low power consumption
A simple reliable and cost-effective way to reduce accidents around the loading dock.
Available in two colors: safety yellow or black.

.......more details

Installation Instructions Instructions d'installation Wiring Diagram Schéma de connexion

24851

Stanley Traveler Carrier Kit

Works with all Stanley chain drive units from 1992-present
Same as part no. 9200014
Trolley slider for part no. 49563

Installation Instructions Instructions d'installation

PRO-GH-VFD

Micanan Variable Speed 1 HP 208/230V 3 Phase Operator

Variable Frequency Drive Operator
On-Board receiver holds up to 20 transmitters

Installation manual Specification sheet

104078

Allstar Wireless Keypad 9931-WKE 318 MHz ** To Extent of Inventory

Compatible with Allstar and MVP receivers
4-digit access code
Backlit keys
Operate LED
Power: 9-volt battery
Codes: 19683

.......more details

Programming Instructions

333LMC

LiftMaster 3-btn O/C/S Transmitter 315MHz *** To Extent of Inventory

315MHz dip switch technology
Green Yellow and Red buttons for easy identification of open close and stop.

Programming Instructions Instructions de programmation

MS00003

Micanan Carriage for PRO-APT / T

For model PRO-APT / T

SEL2641R433-I

Erone 2-Relay Stand Alone Receiver 433MHz

Up to 85 transmitter keys
1 NO relay + 1 NO/NC relay (24VA)
Self-learning memorization
Standard pulse output relay
Power requirements: 12/24Vac/dc
Dimensions: 105 x 45 x 28mm (4.3 x 1.75 x 1.1in)

.......more details

Instruction Manual Sell Sheet Brochure Wireless System Chart

ER100

Carlo Gavazzi Reflector 4" (100mm) Square

High quality reflector for retro-reflective photoelectric switches
Dimensions: 100 mm x 100 mm 9.2 mm thick

21-2LMC

LiftMaster 2-Strand Bell Wire 500ft White/Black

2 strand 22 gauge tin dipped copper hook-up wire
Color coded White & White/black wires

K001A5566

LiftMaster GL Replacement Board ***Discontinued. No Replacement.

Replacement Logic Board for LiftMaster Gate Operators
Fits Slide operator SL570 SL575 SL580 SL585 SL590 SL595
Fits Swing operators SW420 SW470 SW490

CR2016

Maxcell/Renata 3V Lithium Button Cell

ME123-YELLOW-LH

Miller Edge Yellow Left Hand Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Installation Manual Worksheet Sell Sheet

.192_2"-LH

Torsion Spring .192 x 2" x 12ft LH Silver

Wire size: .192
Inside diameter: 2"
Length: 12 ft

41AC050-1M

LiftMaster Electronic Circuit Board Assembly

Assembly includes: circuit board end panel and light socket
For chain drive units with one light
Fits 3245 & 3255
Also known as 41AC050-1 041AC050-1M

41AC075-2S

LiftMaster Circuit Board Assembly for Single and Double Capacitor Models 315Mhz

Assembly includes: End panel Logic board and Light socket
For chain drive units with two lights ie..3575 3585 3595 PD752D and PD758D

R-831-E

FL-Allstar 1-Door O/C/S Receiver 110554-311 MHz

Commercial Open/Stop/Close receiver for one door.
If your operator can be controlled by three button station then the R-831-E receiver and commercial remote controls will work with your operator.
It is easy to set with its learn feature (no coding switch).
This receiver can accept up to 8 different operational codes.
Manufacturer's model number: 190-110554
Dimensions: 6 1/4" x 3 5/8" x 1 3/4"

.......more details

Programming Instructions

41A5021-I

LiftMaster Electronic Circuit Board Assembly ** Discontinued. No Stock Left

Assembly includes: Logic board end panel and light socket
For chain drive models with 2-lights
Fits 1265 Security + 390MHz
Also known as; 41A5021 41A5021-B 41A5021-C 41A5021-D 41A5021-E 41A5021-F 41A5021-G 41A5021-H

MI00006

Micanan VBelt 5L 32.5" 5L325

VBELT_4L310

Lynx VBelt 4L 31" (4L310)

Fits the old Lynx 455 garage door opener

H14GHALF

Half Hinge #1 x 14 gauge

Bright zinc plated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 1-5/8" wide with slotted holes

TRANSF143

Manaras Transformer 120/240-24V 40VA

Transformer 120-240V Primary 24V Secondary 40VA

RADIO-29

Manaras Commercial Receiver Antenna

Commercial receiver coaxil antenna

RADIO-14

Manaras MR-1000 1-Channel 24V Receiver 313 MHz ** Replaced by RADIO-RE900

Controls one operator with MT series transmitters.
Operates on 24VAC.
A LED indicates that the unit has been activated.
Can be installed directly onto the control box of a Manaras operator.

Installation Instructions

AP5

Linear MegaCode Wireless Access Controller 318 MHz

Ideal for gated communities parking facilities and industrial sites
Easy to set-up and use up to 480 remotes can be programmed with a few keystrokes
Easy to add suspend and delete transmitters through programming mode no transmitter dipswitches to set
Supports 480 block coded transmitters or 238 individual transmitters/wireless keypad entry codes
Supports up to six fully supervised safety edge transmitters
AP-5 replaces Linear's AP-4; AP-5 available for replacement of existing AP-4 units only

.......more details

Programming Instructions

218189-01

Linear Trolley Assembly

DT4A

Linear 4-btn Delta3 Transmitter 310 MHz (DNT00027B)

Activates one four-channel receiver (DR4) two 2-channel receivers (DR2) or four single-channel receivers (DR DRQP or DRM).
Can also be used as remote UP DOWN STOP control for commercial operators with DR-4 receiver.
8-dip switch 64 selectable codes
Same as: DNT00027B or DT4A
310 MHz frequency

Programming Instructions

25-42-150

Extension Spring 7' Door - 150 lbs Red

Double - Loop
25" long 42" stretch 150 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

91-00402

Truck Door Rib Neck Carriage Bolt 1/4"-20 x 1.25" (9/16" head)

Zinc plated finish
Use rib neck carriage bolts with lock and keeper assemblies and hinge installations
Rib neck carriage bolt allows tamper proof installation with a rivet lock and eliminates the nut being installed externally for security.

27-20500

Truck Door Bearing and Bracket Plate Assembly for Roll-Up Doors

Zinc plated finish
Bearing with 1" bore pressed in a football style flanged retainer
Factory installation assures proper bearing alignment
Cross reference: T #51038 W #4033 320000

27-20307

Truck Door Balancer Bracket End - Roadside for Whiting Roll-Up Doors

Steel construction
Plain finish
Cross Reference: W # 2524 for # 2376 balancer

DM18-125

Cable Drum Vertical Lift 18' 1100-18 (1-1/4") Pair

18' Vertical Lift aluminum die cast alloy cable drums for 1-1/4" shaft.
3/8"-16 x2" hardened cup point set screws installed with red heads.
Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH.
Max. Door Height: 18'-1".
Rated Lift per Drum: 660 lbs.
Max. Cable Diameter: 3/16".

.......more details

EP2984

Exhaust Port 4" with latch long barrel ** Discontinued**

4" inside diameter 2" sleeve with latch.
Includes fasteners & gaskets.
Polished aluminum finish.

RS1034

Roller 3" Steel 4" stem 10 ball

Steel Roller Wheel diameter: 3"
Working length: 3.38"
Overall length: 4.75"
Box qty: 50 Box weight: 35.8 lbs (3-4-10 Steel)

RN1127

Roller 2" Nylon 7" stem 11 ball White

White Nylon Roller Wheel Diameter: 2"
Working Length: 6.31" Overall Length: 7.25"
Box qty: 150 Box weight: 65.5 lbs (2-7-11 White Nylon)

HD3120

Commercial Inside Slide Lock for 2" or 3" track

Track use: 2" or 3"
Throw: 2-11/16"
Offset from inside face of door to lockbar: 1/2"
Bright zinc plated steel with spring actuated lock bar.
Same as part number 270

25-10102

Truck Door 2" Steel Roller 3" Shaft for Whiting Roll-Up Doors

Zinc plated shaft 10 roller ball design
Shaft Length: 3" Overall Length: 3.75"
Cross Reference: W #2996 T #70224

6X12PO50

Devanco Loop 6' x 12' pave-over 50' lead-in

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

19-5814

LiftMaster Trolley Chain Pack #48 for 14ft Door

Chain pack only

CONSD24V

Reversing Contactor Struthers Dunn 24V

Struthers-Dunn # A275KXX90

BK311

Jamb bracket J-11 #11 12 gauge

Sold by the piece
Height 4.75" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

CLUTCH-ASY-MCJH

Lynx Complete Clutch Shaft Assembly for MCJH Operators 5/8" x 12-1/2"

104083

Marantec Reference Switch for Belt and Chain Rails

This part works with the positioning tab and motor to determine the open & close limits of the actual garage door.

MA013

LiftMaster Shear Pin #6 (Standard)

For barrier gate operator models: MADCBB MATDCBB MASDCBB & MASTDCBB
Use Shear Pin #7 ( MA0137 ) if hole shows sign of wear

HOMELINK-REPTR

LiftMaster HomeLink Repeater Kit ** same as 855LM

All 2006 or older vehicles require a repeater kit installation
In 2007 and newer if the HomeLink does not program with opener install a repeater
The remote supplied in the repeater kit must be kept for future programming and is NOT to be used as a garage door opener remote

Programming Instructions

.207_1-3/4"-RH

Torsion Spring .207 x 1-3/4" x 12ft RH Brown

Wire size: .207
Inside diameter: 1-3/4"
Length: 12 ft

105381

Amarr T-Handle Lock Kit for 1 3/8" Thick Doors Black *** Price by quote only

includes exterior & interior locking device with keys
this item is requires for use with lock bar or cable snap latch components
Need to order 109290 which is the hardware needed for installation or the lock won't work.

89493

Marantec RPM Sensor with Wire Harness

For use on M-line/Q-line/EOS models

41A5034

LiftMaster Snappy Beam Sensors ** DISCONTINUED USE 041-0136

Will work on all LiftMaster residential openers equipped with safety beams
For newer models 1999-current will fit on existing brackets
For older models 1993-1999 new brackets #41A5266-1 are required or use old style safety beams #41A4373A
New Gen ( 2021+) operators will have new snappy beam sensors part number 041-0136
Not compatible with the New Gen (2021+) 041-0155 snappy beam brackets

11-3503_ROD

LiftMaster Rod 1/2-13x64 Threaded Take-Up Bolt

Used on slide gate operators using #50 chain.
Also referred to as adjuster bolts

V3564-00-W-200

Vinyl Seal 4" Bottom Bead End Grey 200' Spool

Bead diameter 3/16" - 7/32" +/- tolerance

YSG12-24LED

Devanco Stop and Go Light Yellow Housing 12-24V LED

LED Traffic Light Red/Green Dock Light
Weather-proof 2 piece housing with highest available UV rating
Wide input voltage range of 10-32V AC/DC eliminates the need to stock 12V and 24V models.
Ultra bright LED's for easy viewing in direct sunlight
Lenses measure nearly 4" in diameter
Requires 4 wall mounting screws 1/4" or 5/16" thread - not supplied

.......more details

Installation Instructions Instructions d'installation Sell Sheet

38874R3.S

Genie Electronic Circuit Board Assembly

Replaces board 38001R3.S and 37470R3.S
Compatible with Genie Series 3 model 3024 garage door opener systems and Overhead Door Series 3 Model 7030

108210

Linear 1-Channel Multi-Code Key Ring Transmitter 310 MHz

Open/Close mini remote for 1 door
Compatible with 310 MHz Stanley and Multi-Code receivers
Easy access to battery and coding switches - 10 dip switches
Power: 12-volt battery
Codes: 1024 (set by dip switches)
RF frequency: 310 MHz

.......more details

Programming Instructions

1086090001.S

Overhead Drive Gear for Overhead 556

White plastic gear only for Overhead model 556

TCG-2

LiftMaster Tri-Code Commercial Receiver ** DISCONTINUED

Two channel commercial receiver compatible with Linear Delta Multi-Code and Stanley radios.
Six 3' wired leads

Installation Manual

27-48-240

Extension Spring 8' Door - 240 lbs Blue

Single - Loop
27" long 48" stretch 240 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

B/CDJH-34-575-UL

Lynx CDJH Heavy-Duty Jackshaft 3/4 HP 575V w/ ECB and Solenoid Brake Right Hand UL325

3 Button station (NEMA 1) Photoeyes 1-Btn Transmitter
1650 RPM high starting torque motor with overload protection
Inherent Mechanical Brake (I.M.B)
B2 Mode C2 Mode D1 Mode E2 Mode T Mode TS Mode
On board Open Close & Stop for ease of setting limits
Pre-wired to accept sensing devices

.......more details

15-48B18LGE

LiftMaster Sprocket 48B18 1"x 1/4"

Also known as: 15-9004 1548B18LGE 159004

20111

Doorlec Cam Retainer Plate Springs *** Replaced by 26117

Works on GH/GHX

TXTA-KYPD

Pulse Universal Wireless Keypad

Programmable 4-digit code for continuous use.
Programmable TEMPORARY 4-digit code for programmable number of uses.
Multi-Brand Adaptable: Works with all Pulse receivers LM receivers (GreenOrange Red Purple and Yellow learning codes) and other receivers with 315MHz or 390MHz.
Powered by 9V battery. (One included in package)

262670

Bircher ProLoop 2 Dual channel loop detector 24 AC/DC Din-Rail

2 Independent Loop Inputs for dual-lane detection or differentiated entry/exit monitoring
Two Configurable Relay Outputs: Allows integration with control systems for gate/door activation alarms or signal switching
Alarm Output: Enhances safety by dedicating fault outputs or loop error detection
Intuitive interface allows for a simple and fast setup Ideal for vehicle access control for gates barriers and parking systems
24V AC/DC input voltage
Din-Rail mount

.......more details

114-0328

RW Track Bracket #31

18 x 31

HW-BRG-1

Lynx Bearing 1" x 2" OD

2 in total on a MCJH

SPR40B48X1

Sprocket 40B48 1" Bore 1/4" KW 2SS

48 tooth sprocket for #40 chain

1222_DUAL_TROLLEY_14'

LiftMaster Dual Trolley kit for 14' high door includes #41 Chain for 14ft High Door Angle tracks (2x) 14' (Actual length 227") and (1x) shaft

Provides a second drawbar-type operation on wide standard door
Includes 14ft tracks #41 chain hardware & Round Bar 1" x 20'
Works with TDC12 & TDC22 Maxum operators

CAPAC

LiftMaster Smart Access Hub

LiftMaster’s Smart Access Hub provides communities an affordable cloud-based option to monitor and control access points without needing to upgrade the entire system
Multiple-Entrance Control with myQ Community.
Flexible Connectivity Options - Ethernet Wi-Fi Cellular.
Universal Compatibility – Flexible connection options to control up to 4 access points (vehicle pedestrian amenity gates door strike or maglock).
Full Cloud-Based Management– For up to 50000 user and event history per unit.
Remote Programming and activity monitoring using myQ Community.

.......more details

BMA3

NICE Release with Lever for Newer Big Metro Ops

PRO-HHD-7511U-L

Micanan 3/4HP 115V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

3/4 HP115V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

Installation Manual (EN) Specification Sheet

CRBH505L5R

LiftMaster 1/2 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 with Carwash Modification****NLA

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

MGH-6534-M-N1-RH

Manaras 1 HP 600V 3P Jackshaft Monitored w/N1 Eyes Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

BOARD076R

Manaras Replacement Power Board

Used on all Manaras circuit board type operators

CAPXSTKPL

LiftMaster Trim Kit with Postal Lock for CAPXS

Trim plate with integrated postal lock cover exclusively for installing with Model CAPXS – Smart Video Intercom S
Pre-Wiring included for postal lock device (not included).
Provides a clean aesthetic installation when the application calls for a postal lock while also helping hide remnants of a previous installation
Dimensions: 14” x 6.5” x 1.4”

15-50B32LGH

Sprocket 50B32 1" shaft 1/4" KW

71-1550B32LGH is a 32 Tooth Sprocket Kit 1" Bore x 1/4" keyway (50B32).
For use with various LiftMaster® Logic 4.0/5.0 and MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators

GALV-295-258-R

Cut-to-Length Torsion Spring .295 x 2-5/8" Right Hand Wound Galvanized Blue Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-331-258-144-R

Torsion Spring .331 x 2-5/8" x 12ft RH Galvanized Red/White

Wire size: .331
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized

Q123

LiftMaster Electric Motor 12VDC K20-9012B-1

For use with various LiftMaster® Slide and Swing Gate Commercial Door Operators

15-50B22LGH

Sprocket 22 Teeth 1" Bore 1/4" Keyway w/SS

ox Quanity is 18 per box

41DJ003MC

LiftMaster Receiver Logic Board DC WiFi RJO

Security+ 2.0 Receiver Logic Board Replacement Kit
For use with various LiftMaster® and Chamberlain® DC Wi-Fi® Wall Mount Residential Jackshaft Garage Door Operators; powered by myQ® and manufactured 2023 to present
The unit will feature a yellow circle learn button

GLASS-ONLY

Elton Sealed Glass Only Clear Made to Order Quote Only

Thermal replacement glass only

227967

Linear Door Arm Bent LCO75

Replacement Parts List

7-6111

RW Hanger 323S Truck & Pendant Sold Individually

Size: 323S
Truck: Same as 323 Hamger
Pendant: 1/2" diameter Steel Zinc Plated
Fasteners: (1) 5/8" washer (1) 1/2" hex nut (1) 1/2" locking nut
Capacity: 1 pair for maximum door weight of 400 lbs
Shipping weight: 1-1/2" lbs

.......more details

E/1929/069

Automatic Systems Round Arm Ass'y 13' (BL229)

Used on the BL229 gate op.

CRBH501L5-LH

LiftMaster 1/2 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5 with Carwash Modification

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

MYQ-SGC2WLM

LiftMaster Smart Garage Camera ***To Extent of Inventory

The LiftMaster Smart Garage Camera™ is compatible with all myQ connected garage door openers.
It works directly with all LiftMaster openers with the Wi-Fi logo and can work with most garage door opener brands manufactured after 1993 when paired with the myQ Smart Garage™ Hub(821LMB).
myQ Connected: monitor the garage through a live feed or recorded event using the myQ app.
Video camera begins recording when motion is detected.
Easy setup with Bluetooth and magnetic mounting base.
Enables secure in-garage delivery for Amazon Prime packages

.......more details

AFB120

LiftMaster Fire Access Box w/Micro Switch & Knox Key Switch Option

ll-in-one fire access box
Includes: access door with a hole for a standard or fire department padlock interior micro switch knock out for Knox key switch and standard cylinder lock
Two options for automatic gate access: 1) micro switch is activated when the padlock is removed and the front panel is opened or 2) via Knox key switch
NOTE: fire department padlock and Knox switch NOT provided

RLC-K36

Miller Edge Light Curtain Non- Monitored 3ft NO/NC

Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
Ideal for pre-2010 installations not requiring a monitored solution.
Ability to span up to 32' wide
Universal mounting brackets included
IP67 waterproof housing

.......more details

PHOTO-060

Manaras Non-Monitored Photoelectric Cells N4/12 & IP67 Retro-Reflective 39' Range incl 3" Reflector

Retro-Reflective photo cell

GDI-HB340

GDI Direct Drive & Jackshaft HAML-RBH-A830 Nema 4 To Accept 1" Shaft Non Monitored

Compact & Light Weight - Fast Installation
Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
Soft start soft stop

.......more details

OTBH-6233-1-M-N1

Manaras Trolley Operator 3/4 HP 208V 3 Ph Monitored w/N1 Photoeyes

Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
25 cycles per hour 80 cycles per day
It incorporates a drum-band type solenoid brake.
Tracks are an extra 36 lbs per track
3/4 HP & 1 HP operators come with #41 full roller chain