Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Garage Door
PRO-J-7511-U-RH

Micanan 3/4HP 115V 1P Jackshaft Monitored ECB N1 Eyes Right Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
  • Emergency disconnect with electrical cut-out switch for manual operation
  • Three button open-close-stop control station Nema-1
  • #41 roller chain & sprockets on all internal drives
  • #50 roller chain and sprockets on final drive
  • 1" permanently lubricated & sealed ball bearings on final drive shaft
  • External radio control terminal strip
Pro J Manual Specification Sheet
MDI0016

Sprocket 50B28 x 1-1/4" 1/4" KW 2SS

PRO-J-5083-U-RH

Micanan 1/2HP 208V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Pro J Manual Specification Sheet
PRO-J-5083-U-LH

Micanan 1/2HP 208V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Specification Sheet
PRO-J-5021-U-LH

Micanan 1/2HP 230V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Specification Sheet
BCH755L5-LH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 575 VAC 3 Ph L5 Left Hand ***Replaced by CRBH755L5-LH

  • Industrial Duty Hoist Operator with Damp Environment modification
  • Comes with CPS-UN4 photoeyes
  • External brake included
PRO-GT-15021-U

Micanan 1-1/2HP 230V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

  • On-Board receiver holds up to 20 transmitters
PRO-GT-10053-U

Micanan 1HP 575V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-10023-U

Micanan 1HP 230V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-5043-U

Micanan 1/2HP 460V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

.319-258-R

Cut-to-Length Torsion Spring .319 x 2-5/8" Right Hand Wound Blue/Green

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-258-Installed
PRO-APTB-7523-U

Micanan 3/4HP 230V 3P Apartment Trolley Operator N1 Eyes Monitored ECB with Brake

  • Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
  • Low clearance design for apartment applications (9.5")
  • External radio control terminal strip
  • 3-btn O/C/S control station Nema-1
  • Solenoid brake installed
  • Door speed 12" per second
    • .......more details
PRO-APT-5053-U

Micanan 1/2HP 575V 3P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

  • Low clearance design for APT applications (9.5")
  • Door speed: 12" per second
  • Monitored board
PRO-APT-5083-U

Micanan 1/2HP 208V 3P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO ATPE)

  • Low clearance design for APT applications (9.5")
  • Door speed: 12" per second
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-TB-10021-U

Micanan 1 HP 230V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 & 1 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-TB-5023-U

Micanan 1/2HP 230V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-TB-5083-U

Micanan 1/2HP 208V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
60-7244

Econo Caution Sign French 14" x 10"

60-7233

Wheel Chock Tie Back Chain Custom Lengths 3/16" Galvanized Sold by the Foot *** No Longer Available. See 60-7238 as possible replacement

  • Tie back chain only - Sold by the Foot
  • 3/16" Galvanized
SC-6

Wheel Chock SC-6 Aluminum

  • Excellent Surface Grip on Tire and Ground
  • Lightweight Aluminum
  • Size: 6" wide x 6-1/2" long x 6" high
60-7248-WC5810

Wheel Chock Safety Pkg incl'd: chock wall bracket 15' chain 3/16" quick link (2) & English Caution Sign

  • System Includes (1) WC-5810 Chock Bracket Chain Tie Back Chain and English Caution Signs
  • Solid Rubber Construction
  • Hook for chain fastening
  • Long Lasting 80 Durometer rubber
  • Size: 8" wide x 10" long x 5" high
60-7248-689U

Wheel Chock Safety Pkg incl'd: pyramid chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

  • System Includes (1) 68-9U Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
  • Handles for chain fastening
  • Long Lasting 80 Durometer rubber
  • Size: 8" wide x 9" long x 6" high
RELAY039

Manaras Relay 3-Pole 24VAC

DJ501L5

LiftMaster Industrial- Duty Jackshaft Doorlock 1/2HP 115/230V 1Ph ***No Longer Available

  • Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
  • These operators include a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.
  • The operators are typically mounted to the wall when used with smaller sectional overhead doors with vertical or high lift and mounted to the side or the front of the hood when used with rolling doors and grilles.
  • DJ operators are attached to the door jackshaft to indirectly drive the door.
  • MyQ® Technology
  • Security+ 2.0®
    • .......more details
MM00022

Micanan Support U-Bracket H/HHD MSI0015

  • Fits PRO-H/HHD
MF00006

Micanan Hex Head Bolt 1/4" - 20UNC 1/2" Full Thread

  • Used on various Micanan operators
  • 2 required per operator
SPUR_GEAR

Spur Gear For Holdown Assembly

.205-3.5-10-LHW

Mini Storage Spring .205 x 3.5" x 10" long Left Hand

HRB-10

High Riser Bracket for 7" Above Dock or Higher 10"

  • High Riser 10" Riser Bracket for 7" Above Dock Door or Higher
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
SRB-4

Standard Riser Bracket for 6" Above Dock or Less 4"

  • Standard 4" Riser Bracket for 6" Above Dock Door or Less
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
Specification Sheet
SRB-3

Standard Riser Bracket for 6" Above Dock or Less 3"

  • Standard 3" Riser Bracket for 6" Above Dock Door or Less
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
MK00594

Micanan Auxiliary Contact Block 100FA40

17-2001

LiftMaster Pulley 8" x 5/8" 4L Belt (K17-2001)

  • Same as K172001
MD-00201

Sprocket 50B40 x 1-1/2" 3/8" KW 2SS 5/16"

MM00447

Micanan Idler Wheel PRO-APTC

STRUT-2-1/4-14'-NH

Door Strut 2-1/4" Non Hemmed 14 ft Long ***No Longer Available

  • Reinforcement bar 2-1/4"
  • 20G
LB1212-14

Laminated Bumper Standard Black 12" L x 14" W 12" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB1012-18

Laminated Bumper Standard Black 12" x 18" 10" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB912-36

Laminated Bumper Standard Black 12" x 36" 9" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB912-24

Laminated Bumper Standard Black 12" x 24" 9" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB912-18

Laminated Bumper Standard Black 12" x 18" 9" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB912-12

Laminated Bumper Standard Black 12" x 12" 9" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB812-24

Laminated Bumper Standard Black 12" x 24" 8" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB810-24

Laminated Bumper Standard Black 10" x 24" 8" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
TVB424-11SF

Steel-Faced Laminated Bumper Black 5 1/4" Projection Vertical Installation 24" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
LVB424-11SF

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 24" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
TB410-36SF

Steel Faced Laminated Bumper Black 10" x 36" 5 1/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB412-24SF

Steel Faced Laminated Bumper Black 12" x 24" 4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB410-18SF

Steel Faced Laminated Bumper Black 10" x 18" 4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-24SF

Steel Faced Laminated Bumper Black 10" x 24" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB612-18

Laminated Bumper Standard Black 12" x 18" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB410-36

Laminated Bumper Standard Black 10" x 36" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
34115

Doorlec Awning Pulley 194 x 1"

  • Used on model LDJ & LDJ-3
MK-00050

Micanan Overload Reset 3-Phase 2.6 - 3.7 Amps

TOP-BK-PCG

Powdercoated Commercial Top Bracket Adjustable 1-Bolt Grey

  • Powdercoated Grey
  • 12 gauge roller carrier and base plate
  • Adjustment of 7/16" minimum to 3-1/2" maximum
  • Good for use with 3" hardware
HINGE-511-PCG

Powdercoated Hinge #5 x 11 gauge Grey ** To Extent of Inventory

  • Heavy Duty 11 gauge offset hinge #5 - 0.78 lbs
  • Powdercoated Grey
  • For use with 7/16" stem rollers
K32-8002

LiftMaster Gear Reducer

  • Also known as: 32-8000 G328001 32-8001 328002 328001 32-8002 G328002
Z9211-2

Stationary Cone Tool 2-5/8"

  • Easily dislodges the cone from the torsion spring
MB-03202

Micanan Electric Motor Only 1 HP 575V 3PH Base Mount O.D.P FR56

  • Fits T TB APT APTC J EJ H EHJ HHD SD
90-B

Micanan Keyway 5/16" x 3" Long (Reducer BHC 80) for 2 3 HP

MF00007

Micanan Hex Head Bolt 1/4" - 20UNC 3/4" Full Thread

  • Used on PRO-GHC
  • 4 required per operator
MM00149

Micanan GHC Frame Support U-Bracket MSI0161 (for 2 3HP)

MF00002

Micanan Hex Head Bolt 1/2" - 13 UNC x 1-1/4"

  • Used on PRO-GHC
  • 4 required per operator
MM00008

Micanan Frame GHC MSI0034

MH00004

Micanan Flange Bearing UCFL207-22 1-3/8" Bore

  • Used on PRO-GHC (BHC-80) for 2 3 5HP
  • 2 required per motor
MF00019

Micanan Hex Head Bolt 3/8"- 16 UNCx1 Full Thread

  • Used on PRO-GHC
  • 6 required per operator
31343

Doorlec Sprocket 41B23 - 5/8" bore 2-Hole

41A4208-2

LiftMaster Chain Spreader Kit

  • Chain Spreader Replacement Kit.
  • For use with various LiftMaster® and Chamberlain® Chain drive garage door opener models.
  • Complete kit includes: Chain spreader replacement screws and washers.
  • Also known as: 41A4208 41A4208-2 062210
PRO-X_MOD-1/575V

Micanan Explosion-Proof Modification N-7/N-9 for 1HP 575V

  • Modification includes an explosion-proof motor explosion proof fittings operator mounted explosion-proof electrical control enclosure and n explosion-proof three button station.
T-50-H

FL-Heddolf 1-btn Transmitter ID220-1KA-311 MHz ** Discontinued

  • Keystone-Heddolf single button FL T-50 compatible remote
  • 9 dip switch format
  • 9V battery and metal clip included
7-21-1A

Lynx Barlock Latch

  • Comes with screws
Assembly Manual
TRACK-SET-2

2" Tracks Set with Wall Brackets Special Order

  • Custom order to customer's needs
  • Set includes the vertical and horizontal tracks and wall clips for either wood or steel.
  • Must spcify if the door has torsion or extension springs if the tracks are going on a wood jam or steel desired radius and thickness of door
2376.171_25.930

Whiting Torsion assembly .171 wire size 25" spring length 93" shaft

IRB-325

EMX Industries Door and Gate Infrared Thru-Beam Photocells w/ Grey Hoods UL325-2016 EMX-1112-K

  • Type B1 non-contact sensor for use with automatic gates and doors
  • Power: 12V to 24V AC/DC
  • Relay Contacts: 30V 1A
  • Dimensions: 5.03" High x 3.06" Wide x 3.02" Deep
  • Housing: UL and CSA Type 4 4X 3 3R 12 13 Rating
  • Operating Temperature: -40 degrees to 170 degrees
    • .......more details
Installation manualSell sheet
WHITING-SPEC-ORD

Whiting Special Order Parts

  • Special order to customer's specs
50615

Splash Proof Cover EHJ / HDC

Drawing
.363-334-R

Cut-to-Length Torsion Spring .362 x 3-3/4" Right Hand Wound Green/White

  • Priced per inch - cones sold separately
  • For factory installed cones use part no. C-375-INSTALLED
VWS-34-BROWN

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Chocolate Brown

  • Pan head
  • S point
VWS-34-DARK-OAK

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Dark Oak

  • Pan head
VWS-34-ZINC

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Zinc

  • Pan head
41C5497

LiftMaster Wiring Harness Kit High Voltage

  • For use with various LiftMaster® and Chamberlain® AC Chain Drive Garage Door Openers; manufactured after 2001
MP-00002-575V

Micanan Apartment Feature: Timer-to-Close Function and Light Control Modification only

  • Controlling action of two lights- sockets supplied on cover
PRO-HHD-7581U-L

Micanan 3/4HP 208V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

  • 3/4 HP208V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
Installation Manual (EN)Specification Sheet
33223A

Genie Bushing

  • Drive shaft bushing on PMX500 Chain Glide
E/BLOP/122

Automatic Systems Red Arm Light - 2 Sets

  • Increases visibility of the arm on BL229 gate operator
CB380500

Cable 3/8" 7x19 500' Galvanized

  • Galvanized Cable 3/8" 7x19 500ft spool.
  • Cable break strength: 14000 lbs
9006-10

Excalibur Threshold Kit 10'2" x 6" W Solid Aluminum ** Price by Quote Only

  • Stands 1/2" tall
  • Built with 6061-T6 solid aluminum to withstand extreme weight and excessive traffic conditions.
  • Two-way fastening/seal system won’t shift buckle or leak
  • Top V-groove design provides for skid proof protection and improved tire traction on loading docks and incline ramps.
  • The 1/2" diameter wire access port makes it easy for sensor and security installations.
  • The kit comes complete with pre-drilled counter sink holes 3/8" anchors and sealant.
    • .......more details
1104-8FT-GREEN

Residential Side & Top PVC Weather-Strip with cap 8' Long - Green (R)

  • Green rigid vinyl retainer with green flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
K77-10978

LiftMaster Hardware Box for Model MH

MB-02004

Micanan Electric Motor Only 3/4 HP 110/220V 1PH C-Flange TEFC 56C

  • C-Flange TEFC electric motor
  • Fits models: GT GH GHC & GSD
MB-01002

Micanan Electric Motor Only 1/2HP 110/220V 1PH Base Mount TEFC FR56

  • Base Mount TEFC electric motor
  • Fits models: TW TBW JWHWHHDW SDW
K94-33961

LiftMaster Wire Harness Kit MT MJ MH

19-5112

LiftMaster Trolley Roller Chain Pack #41 for 12ft Door

  • For 3/4 & 1 HP trolley operators
.306-258-L

Cut-to-Length Torsion Spring .306 x 2-5/8" Left Hand Wound Red

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
1003-5"-PER-FT

Bottom U-Rubber 5" Black Sold per Foot

74-5FG3A-C

Fuse 3 Amp 250V 5mm x 20mm Glass 5/Pkg

  • Fast Acting
  • Sold in packs of 5
5-30-8A

3" Vertical Track 12-GA 14'-4" (15' door) Sold per Pair

  • Pierced track
BCH101L5L-BZ

LiftMaster 1 HP 115/230 VAC 1 PH Commercial Hoist Op L5 Carwash and Roller Bearing Mod. LH ***No Longer Available

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
WEL-200-T

EMX Wireless Edge Link Transmitter Unit only

  • Addition transmitter unit for multiple setup
Manual
PRO-HHD10021U-L

Micanan 1 HP 230V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

  • 1 HP230V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn o/s/c (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
Installation Manual (EN)Specification Sheet