Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Hinges
CDJH-34-115-ECB

Lynx CDJH Heavy-Duty Jackshaft 3/4 HP 115V with ECB Right Hand UL325

  • 3 Button station (NEMA 1)
  • 1650 RPM high starting torque motor with overload protection
  • Inherent Mechanical Brake (I.M.B)
  • B2 Mode C2 Mode D1 Mode E2 Mode T Mode TS Mode
  • On board Open Close & Stop for ease of setting limits
  • Pre-wired to accept sensing devices
  • 24 Volt accessory power
  • On board (372 MHz) receiver capable of programming up to 20 transmitters
  • External receiver connection
  • NEMA 1 Electrical enclosure
  • Adjustable friction clutch
  • Maximum Output Revolutions - 45
  • Primary Drive: Heavy Duty 4L V-Belt
  • Secondary: #41 CHAIN / SPROCKETS
  • Output: #50 CHAIN / SPROCKETS
  • 32 RPM output shaft speed
  • Door speed determined by the door system installed
  • Standard sprockets: Sectional: 50B12 x 1” bore to 50B18 x 1” bore OR 50B18 x 1 1/4” bore Steel Rolling: 50B12 x 1” bore to 50B24 x 1 1/4” bore
K75-12585

LiftMaster Complete Brake Assembly GH 230V

  • Complete assembly includes: Brake hub kit Brake release lever Brake disk Spring cup Studs Compression springs Brake solenoid Solenoid cover Spacers Mounting plate Pressure plate Feather key and Fastener.
  • Also known as: 3059004230
19-40ML-NP

Master Link #40 Nickel Plated

  • For #40 chain
K94-32309

LiftMaster J2 Harness Assembly SL585 SL595

7-10-1

Double Slide Lock

OPH-6233-ECB-LH

Manaras Opera-H 3/4HP 208V 3Ph with Electronic Circuit Board Left Hand

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
33356A

Genie Opto-Luctor Wheel

684-33-110

Universal Bracket 2.25" x 2.5" x 48" w/ Plate 4"x12"

OSH-6812-ECB-LH

Manaras Opera-SH 1/2 HP 208V 1Ph with Electronic Circuit Board Left hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
CP-MO-12-123/1

Lynx Electric Motor 1/2 HP 230V 1 Ph

  • Electric motor only
14211

Doorlec Solenoid-Brake Lever Upper

  • Fits model LJH
R5213

Bearing Flangette Retainer Only Standard

  • Does not include bearing
  • For use with all C16-32F and C20-32F
  • Steel Zinc plated finish
MGH-6533-ECB-RH

Manaras 3/4 HP 600V 3P Jackshaft with Elect. Circuit Board Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
16-8001

LiftMaster Cogged Vbelt 4L 34"

  • This is a replacement Belt (4L340).
  • Compatible with LiftMaster® Model BG770 Barrier Gate Operators.
SPBAR001

NICE Bar Support Kit MBAR5

MP00215

Micanan Limit Shaft Assembly N1 H/J

CP-PW-NM-34

Lynx Pocket Wheel for HDC

WHTG-COLDSAVER

Whiting Special Order ColdSaver Door ** POR

  • Special order to customer's specs
  • 2-1/8” thick panels built with aluminum facings inside and out for easy cleaning and excellent acceptance of paint and decals.
  • No rivets on face of door to interfere with lettering or decals.
  • Aluminum extruded panels .070” thick resist puncture.
  • Foam-in-place urethane insulation.
  • Panel joints are double sealed.
    • .......more details
871-ZAP

Zap Interface Expansion Module Series II

  • A plug-in module with the option for additional expansion room for inputting external control devices.
  • Open Stop Close Common and Cycle input terminals are all provided
  • A 24VDC output terminal is provided.
  • If the power supply is overloaded an LED illuminates so you know there is a fault or that a device is drawing excessive current.
  • Requires 14-20 AWG wiring and plug-in mounting.
  • Comes with a six position dual direction plug that slides in.
    • .......more details
C-24X12-134-LEXBLK

Thermal Window 24" x 12" for 1-3/4" Door Lexan Black *** Special Order by Quote Only

  • For 1-3/4" thick door
  • Glass type: Polycarbonate (Lexan)
HA-3001

Hose Anchor for Treadle Hose

  • Made of cast iron
N4GH503L5-RH

LiftMaster Gearhead wi/Watertight/Oiltight Mod. and Brake 1/2 HP 230/460V 3-Phase Logic 5

  • N4 (M103) modification installed on operator Watertight Oiltight Dust-tight with Nickel-plated chain and Dynamic brake.
  • Comes with CPS-UN4 photo eyes
XBA3/U

NICE MBAR Replacement Logic Board

E/BLOP/149

Automatic Systems Safety Edge for BL229 13'

LA500SLRHARN

LiftMaster Solar Harness Kit LA500

02-406-2

LiftMaster Key Set Qty 2

  • Replacement Key ONLY for 02-406 2006-2015 #1 or #1502M
ETB-321-1/2HP

Doorlec 1/2HP 230V 1PH Trolley Door Opener

  • Trolley model heavy-duty door operator designed to provide smooth dependable operation of sectional overhead type doors.
902-T-7X9-VL

Hardware Set 3" Industrial 902-T for 7' x 9' VL

  • A variety of options and sizes are available call for quote
  • Set includes tracks HD rollers hinges solid shaft drums cables springs and struts if applicable.
K75-36260

LiftMaster Lock and Keys

  • For various Liftmaster commercial slide and swing gate operators.
60-6550-A-BLK

Speed Bump Black 36" Econo Light Weight for Asphalt *** NLA

  • A standard speed bump system section includes (2) main pieces (2) endcaps x 5” long and (1) connector clip.
  • Main pieces may be added and connected to form larger units.
  • 36” long x 10.5” wide x 2” high (main piece)
  • EndCap: 5” Safety Snap On End Cap - sloped modular profile prevents tripping by pedestrians.
  • Yellow Plates: Each speed bump section is embedded with (6) yellow safety plates of weather resistant composite material for protection from salt freeze and thaw.
  • Can be used as a cable cover - bottom sides include 1” x 1½” channels for protecting temporary or permanent cables or hoses.
    • .......more details
103-T-8X10-VL

Hardware Set 3" Industrial 103-T for 8' x 10' VL

  • A variety of options and sizes are available call for quote
  • Set includes tracks HD rollers hinges solid shaft drums cables springs and struts if applicable.
RELAY008

Manaras Relay AB 700-HA33A24 11 Pin TP

  • Allen Bradley
1371

Whiting Complete Bottom Bracket with Cover

OPH-6212-ECB-LH

Manaras Opera-H 1/2HP 240V 1Ph with Electronic Circuit Board Left Hand

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
  • 25 cycles per hour 100 cycles per day
    • .......more details
41A4353-1

LiftMaster Header Bracket and Clevis Pin

PRO-GH-15011U-LH

Micanan 1.5 HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
515.06000R01

NICE Octagonal adaptor 60x(0.6/1) Wheel + Crown

7206

Whiting Balancer Bracket End - Curbside for Whiting Roll-Up Doors for #7176 Balancer

  • Steel construction
  • Plain finish
  • Whiting original
.192-134-R

Cut-to-Length Torsion Spring .192 x 1-3/4" Right Hand Wound Silver

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
16-4L280

LiftMaster Vbelt 4L 28" **to extent of inventory

  • Compatible with LiftMaster® Model SW490GL Swing Gate Operators
K081C0168

LiftMaster Screw Drive Rack

  • Also known as: 081C0168 81C168
  • This replacement screw drive rack is not compatible with LiftMaster® Models 3130 or 3240
TRACK-SET-2STD-10

2" Tracks Set 10'-0" Torsion 1-3/4" Door Clips for Wood Frame 12" Radius *** By quote only

MD00019

Micanan Sprocket 50B40 X 1" 1/4" KW 2SS 5/16

G3243

GDI Battery Backup Option G3243

  • BBU option if AC power is lost
H14G03-BLACK

Hinge #3 x 14 gauge Black Powder Coated

  • Black powder coated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • Individually wrapped
2100-564

Linear Clutch Disk Facing HSL HSLG

SF375-W

Spring Fitting 3-3/4" Winding Side Only

  • Universal thread for use in either LH or RH wound springs.
  • Maximum wire size diameter: .4062".
  • Set screw installed: 3/8"-16 x 1-1/2" (2).
  • Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
  • Winding bar hole 5/8"
OSH-6813-ECB

Manaras Opera-SH 3/4 HP 208V 1Ph with Electronic Circuit Board

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
GAL.262-258-144R

delete

111396.0004

Overhead Brake Kit Model H 1/2HP 1PH

Installation instructions
SPRING001

Manaras Cam Guide Plate Spring

2376.177*26.960

Whiting Torsion assembly .177 wire size 26" spring length 96" shaft

P-75

End Plug for 3/4" ID Rubber Hose

  • Sold per plug
30005

Doorlec Brake Solenoid 208V with wire leads

BTN-8L5-GR

Devanco green replacement button for 8L5-OCS

  • green replacement button for 8L5-OCS
2376.192.29.910

Whiting Torsion assembly .192 wire size 29" spring length 91" shaft

  • This is a full balancer assembly
FLO1R-SA

NICE 1-btn Keychain Remote 433.92 MHz

  • Rolling code No internal dip switches programming with the reciever
  • Battery included: 12V (GP23A)
  • Dimensions: 72 x 15 x 40 mm
CP-BRK-WALL

Lynx Wall Bracket Commercial Operators

1004-2-10'

Aluminum Bottom Retainer 2" U-Shape with Reinforcement 10 ft***Actual Length 10'1"***

  • For door thickness 2"
K72-12789

LiftMaster Hand Chain Shaft Kit GH (1/2 - 2HP)

  • Complete with: Bevel Gear 3/4" ID Hand Chain Guice Hand Chain Shaft Bearing 3/4" ID Nyliner Bearing Compression Spring Chain Wheel Washers Roll Pins and E-Rings
PRO-HHD-10053E-R

Micanan 1 HP 575V 3P Heavy-Duty Jackshaft NM ECB No Eyes Right Hand

  • 1 HP575V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Non-Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
  • Emergency chain hoist with electrical cut-off for manual operation
    • .......more details
Installation ManualSpecification Sheet
K76-34697

LiftMaster APS Encoder 24V

  • For use with various LiftMaster® Commercial Slide and Overhead Gate Operators
RL44-40

Direct Burial Loop 6' x 16' Loop with 40' Lead-In

  • Used for installations under concrete asphalt pavers or in gravel roads.
  • The loop can be tied directly to the rebar before concrete is poured.
  • Wire is designed for a direct burial application.
10-12360

LiftMaster Universal Hood Angle Mounting Bracket 10-12360M1

  • Heavy gauge steel bracket for vertical or horizontal mount on either front or top of coil on a rolling door.
  • Has a variety of mounting hole patterns compatible with many OEM manufactures
  • For use with J H DJ DH
  • May be welded
MP-00010-U

Micanan Auxiliary Limit Switch for Monitored ECB

  • Installed to control auxiliary device
SCLUTCHSHAFTN4

Micanan Complete Clutch Shaft Assy for PRO-HW

31103

Doorlec Sprocket 41B36. KW/SS 1"

510.2996.07

Whiting Steel Roller Upgrade Option for 7 Panel DF Door

  • Upgrade option only - must accompany a door order
ME00054

Micanan Clutch (Input) Shaft Only for Pro-H/HHD N4 3/4" x 17-5/8" (3/4 HP-1 HP)

  • 3/4" x 17-5/8"
CAP001

Manaras Push Button Sealing Boot for LIMIT017

C184-24B

Coil Cord 4 Wire 18-Gauge Black Extends 24ft

PRO-APTC-5083-U

Micanan 1/2HP 208V 3P Apartment Trolley Op. Photo Eyes Monitored ECB

  • Low clearance design for APT applications (8.5")
  • Door speed: 7" per second
  • N-4 Micanan compatible monitored photocells included
  • Monitored board
  • Side access hinged cover for easy access to controls
  • Three button open-close-stop control station Nema-1
    • .......more details
Installation manual
PRO-GHC-10053U-R

Micanan 1 HP 575V 3P Gearhead Operator with N1 Eyes Monitored ECB Right Hand

  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
  • Full function Smart 10.0 logic board and on-board receiver
    • .......more details
MP00130

Micanan Up-Charge Track and #41 Chain for 14' h Door PRO-APTC

  • For 1/2 HP Micanan trolley operator PRO-APTC
MOUNTSHAFT017

Manaras Clutch Shaft Kit for MTH MTBH (no pulley) Old Pre-1998

  • Input / clutch shaft kit for MTH MTBH
  • For old MTH MTBH with 1" diameter input shaft no pulley included
MH00019

Micanan Precision Bearing 3/8" ID ** Replaced by MH00096

210109

Skylink Pulley Assembly - Chain

14219

Doorlec Disconnect Arm LJH

1005-1-3/8-8'

Aluminum Bottom Retainer U-Shaped 8' Long

  • For door thickness 1-3/8"
26CW945215-CUT

Truck Door Intermediate Panel (11.5" x Cut-to-Size ) Painted White for Whiting Dryfreight

  • These panels are cut to customer's exact measurements.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
MODKIT003

Manaras Time Delay Kit 1.5 Sec For Contactor Models

  • MODKIT003 for field upgrades
  • Order MOD003 when ordered in conjunction with a commercial operator
IRB-TX

EMX Industries Transmitter Board Only for IRB-4X *** NLA

PRO-GH-7553U-RH

Micanan 3/4HP 575V 3P Gearhead Op. N1 Eyes Monitored ECB Right Hand

  • Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
  • Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
  • External radio control terminal strip
  • Three button O/C/S control station Nema-1
  • Supplied with Nema-1 photocells
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
.406-514-R-C

Cut-to-Length Torsion Spring .406 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.393-514-L-C

Cut-to-Length Torsion Spring .393 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
SG-13-NO

Telco Light Curtain with Rectifier Normally Open 72" (13-193-028-D1-E-H58-5) ***No Longer Available

  • Normally Open
  • SGR13-193-028-D1-E-HS8-5
  • SGT13-193-028-D1-E-01-15
  • 1928mm housing 1800mm active height 28 channels NO relay output 15m cable
Specification sheetWiring diagram
.375-514-L-C

Cut-to-Length Torsion Spring .375 x 5 1/4" Left Hand Wound. Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.343-514-L-C

Cut-to-Length Torsion Spring .343 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-525-INSTALLED
  • If cones are required a filler must be added use part # FILLER
.343-258-R-C

Cut-to-Length Torsion Spring .343 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.306-6-L-C

Cut-to-Length Torsion Spring .306 x 6" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.306-514-L-C

Cut-to-Length Torsion Spring .306 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.295-334-R-C

Cut-to-Length Torsion Spring .295 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
.295-258-L-C

Cut-to-Length Torsion Spring .295 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
.283-134-L-C

Cut-to-Length Torsion Spring .283 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.262-2-L-C

Cut-to-Length Torsion Spring .262 x 2" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.262-134-R-C

Cut-to-Length Torsion Spring .262 x 1-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.250-334-L-C

Cut-to-Length Torsion Spring .250 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
.250-2-R-C

Cut-to-Length Torsion Spring .250 x 2" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.234-2-R-C

Cut-to-Length Torsion Spring .234 x 2" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.207-258-R-C

Cut-to-Length Torsion Spring .207 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED