Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Hinges
16-5L304

LiftMaster Cogged Vbelt 5L 30.4"

24-24-6

Small Relay 24VAC 11-Pin 3 PDT

R-831-E

FL-Allstar 1-Door O/C/S Receiver 110554-311 MHz

  • Commercial Open/Stop/Close receiver for one door.
  • If your operator can be controlled by three button station then the R-831-E receiver and commercial remote controls will work with your operator.
  • It is easy to set with its learn feature (no coding switch).
  • This receiver can accept up to 8 different operational codes.
  • Manufacturer's model number: 190-110554
  • Dimensions: 6 1/4" x 3 5/8" x 1 3/4"
Programming Instructions
CAM011

Manaras Limit Cam

  • Limit cam for Mountshaft018A 018B
  • 2 cam's required per shaft
19-48ML

Master Link #48

  • For #48 chain (#410)
  • Same as #65 chain
144C54

LiftMaster Idler Belt Pulley

  • Wide idler belt drive pulley
  • For square rail assemblies
19-48HL

Half Link #48

  • Half link for #48 chain (#410)
24-115-1

Relay 8 terminal 115VAC DPDT

  • For most operators with contactor
  • Will work on Liftmaster MH Lynx MCJH and more
41A4885-2

LiftMaster MVIS Pulley & Worm Gear Assembly

  • Gear and sprocket assembly for belt drive models between 1995-2002
Installation ManualManuel d'Installation
893MAX

LiftMaster 3-btn Transmitter Security+ 2.0

  • Can be used as a replacement remote control for 80 Series 970 Series and 370 Series LiftMaster remote controls.
  • Compatible with 315 MHz or 390 MHz garage door openers manufactured after January 1 1993.
  • For use with gate operators commercial door operators or other products that are 315 MHz or 390 MHz and have a Learn Button.
  • Same as Chamberlain 953EV
893MAX Manual
.468_6"-RH

Torsion Spring .468 x 6" x 12ft RH Blue/Orange **NLA

  • Wire size: .468
  • Inside diameter: 6"
  • Length: 12 ft
.437_6"-RH

Torsion Spring .437 x 6" x 12ft RH Red/Green

  • Wire size: .437
  • Inside diameter: 6"
  • Length: 12 ft
.406_6"-RH

Torsion Spring .406 x 6" x 12ft RH Blue/Yellow

  • Wire size: .406
  • Inside diameter: 6"
  • Length: 12 ft
.375_6"-RH

Torsion Spring .375 x 6" x 12ft RH Yellow/Green

  • Wire size: .375
  • Inside diameter: 6"
  • Length: 12 ft
.363_6"-RH

Torsion Spring .363 x 6" x 12ft RH Green/White

  • Wire size: .363
  • Inside diameter: 6"
  • Length: 12 ft
.331_6"-RH

Torsion Spring .331 x 6" x 12ft RH Red/White

  • Wire size: .331
  • Inside diameter: 6"
  • Length: 12 ft
.295_6"-RH

Torsion Spring .295 x 6" x 12ft RH Blue

  • Wire size: .295
  • Inside diameter: 6"
  • Length: 12 ft
.437_5-1/4"-RH

Torsion Spring .437 x 5-1/4" x 12ft RH Red/Green

  • Wire size: .437
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.393_5-1/4"-RH

Torsion Spring .393 x 5-1/4" x 12ft RH Orange

  • Wire size: .393
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.363_5-1/4"-RH

Torsion Spring .363 x 5-1/4" x 12ft RH Green/White

  • Wire size: .363
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.375_5-1/4"-RH

Torsion Spring .375 x 5-1/4" x 12ft RH Yellow/Green

  • Wire size: .375
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.331_5-1/4"-RH

Torsion Spring .331 x 5-1/4" x 12ft RH Red/White

  • Wire size: .331
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.319_5-1/4"-RH

Torsion Spring .319 x 5-1/4" x 12ft RH Blue/Green

  • Wire size: .319
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.312_5-1/4"-RH

Torsion Spring .312 x 5-1/4" x 12ft RH Yellow

  • Wire size: .312
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.306_5-1/4"-RH

Torsion Spring .306 x 5-1/4" x 12ft RH Red

  • Wire size: .306
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.283_5-1/4"-RH

Torsion Spring .283 x 5-1/4" x 12ft RH White

  • Wire size: .283
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.421_3-3/4"-RH

Torsion Spring .421 x 3-3/4" x 12ft RH Gold

  • Wire size: .421
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.363_3-3/4"-RH

Torsion Spring .363 x 3-3/4" x 12ft RH Green/White

  • Wire size: .363
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.331_3-3/4"-RH

Torsion Spring .331 x 3-3/4" x 12ft RH Red/White

  • Wire size: .331
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.283_3-3/4"-RH

Torsion Spring .283 x 3-3/4" x 12ft RH White

  • Wire size: .283
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.306_2-5/8"-RH

Torsion Spring .306 x 2-5/8" x 12ft RH Red

  • Wire size: .306
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.295_2-5/8"-RH

Torsion Spring .295 x 2-5/8" x 12ft RH Blue

  • Wire size: .295
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.243_2"-RH

Torsion Spring .243 x 2" x 12ft RH White/Yellow

  • Wire size: .243
  • Inside diameter: 2"
  • Length: 12 ft
.207_2"-RH

Torsion Spring .207 x 2" x 12ft RH Brown

  • Wire size: .207
  • Inside diameter: 2"
  • Length: 12 ft
.218_2"-RH

Torsion Spring .218 x 2" x 12ft RH Yellow/Orange

  • Wire size: .218
  • Inside diameter: 2"
  • Length: 12 ft
.273_1-3/4"-RH

Torsion Spring .273 x 1-3/4" x 12ft RH Orange/Red

  • Wire size: .273
  • Inside diameter: 1-3/4"
  • Length: 12 ft
.262_1-3/4"-RH

Torsion Spring .262 x 1-3/4" x 12ft RH Red/Yellow

  • Wire size: .262
  • Inside diameter: 1-3/4"
  • Length: 12 ft
.234_1-3/4"-RH

Torsion Spring .234 x 1-3/4" x 12ft RH Blue/White

  • Wire size: .234
  • Inside diameter: 1-3/4"
  • Length: 12 ft
22-240

Brake Solenoid 230-240V

  • Used on all brands of commercial door and gate operators
  • 2 wire connection
23-10041-1

LiftMaster Double Limit Switch Commercial DP DT

  • Double limit switch DP DT
  • For LiftMaster and Micanan operators
19-50ML

Master Link #50

  • For #50 chain
  • ANSI Standard Carbon Steel
15-41B32LGH

Sprocket 32 Teeth 1" Bore 1/4" Keyway

  • Sprocket for #41 chain
41A4373A

LiftMaster Safety Sensor Kit 1993-1998 ** Replaced by 041-0136 & 041-0155-000

  • For LiftMaster Chamberlain & Sears openers built from 1993-1998
  • Kit includes: Saftey sensors 24" wire and gel connectors
  • Replacement: 041-0136 with the 041-0155-000 brackets
11801

Doorlec Oilite Cam

  • Fits 5/8" shaft fine thread.
  • Grooved 5/8" - 24 x 3/8"
  • Requires 2 per cam shaft
37500

Doorlec DC-2000 Electronic Circuit Board

  • Works in all Doorlec model openers except R-99
  • Input power to board is 120V
  • 24V DC available on terminals 9 & 11
  • Accessory power on terminals 1 & 11
  • 1 = Stop. 2 = Com. 3 = Open 4 = Close
12563

Doorlec Upper Brake Shoe - Right

  • Fits on all Doorlec operators equipped with brake shoes
  • Use with drum #12561
17335

Doorlec DC-3100T 4-btn O/C/S Compact Transmitter 301 MHz

  • 3 buttons for O/C/S and 1 button for turning lights ON/OFF
  • Includes 12V battery
  • Dimensions: 3-1/4" l x 1.5" w x 1/2" thick
12562

Doorlec Lower Brake Shoe - Left

  • Fits on all Doorlec operators equipped with brake shoes
  • Use with drum #12561
17307

Doorlec DC-3000R 1-Channel Receiver 313 MHz

  • 10 dip-switches for programming
  • 24VAC power input
  • 1 N/O relay
Mounting Instructions
17308

Doorlec DC-3000T 1-btn Transmitter 313 MHz

  • One block of 10 dip-switches for programming
  • Compatible with Doorlec 17307 receiver (DC-3000R)
  • New smaller Keychain style transmitter replaces older square beige visor remote
Programming Instructions
MK00641

Micanan Smart 10.0 Full Feature Circuit Board Monitored with 5 Relays

  • For 1/3 1/2 and 3/4 Hp - 110/220V 1p 230V 3p
  • Board has P1 & P2 terminals
  • Up to 20 transmitters can be programmed
Instructions Manual
17311

Doorlec AT1035D 1-btn Mini Transmitter 313 MHz ** To extent of inventory

  • One block of 10 dip-switches for programming
  • Compatible with Doorlec 17307 receiver (DC-3000R)
  • Includes 12V battery (GP23A)
PL-BO7-CRGSLIDE

Lynx Carriage Assembly (Nylon) ** No Longer Available

  • Proline / Lynx 455 Plus trolley slide assembly
  • For operators built from 2000 +
T3B-DS

Lynx 3-btn Transmitter Dip Switch 303 MHz

  • Ultra secure mid-size transmitter with 8 dip-switches for coding
  • 3-buttons provides control for 3 Lynx operators
  • Compatible with HomeLink in-vehicle remote control
  • Can be mounted on visor with saddle clip or carried on a keychain
  • Visor clip and 12V battery included
  • Will work with Lynx residential operators built from 2000 and up.
    • .......more details
Compatibility chart
BK002

Residential Top Bracket Low Headroom Sold Individually

  • Bright zinc plated 10-gauge steel
  • 3/8" roller offset
H14GHALF

Half Hinge #1 x 14 gauge

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 1-5/8" wide with slotted holes
H14G06

Hinge #6 x 14 gauge

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • #6 position
  • Use between sections 6 and 7
  • Same as part number 246
    • .......more details
H14G05

Hinge #5 x 14 gauge

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • #5 position
  • Use between sections 5 and 6
  • Same as part number 245
    • .......more details
H14G01

Hinge #1 x 14 gauge

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • #1 position
  • Use between sections 1 and 2 or in the center position
  • Same as part number 241
    • .......more details
877LM

LiftMaster Sec+ 2.0 Keyless Entry

  • Features Security+2.0™ rolling code technology
  • One-button-to-close feature
  • Temporary password option
  • Program code directly from keypad
  • Backlit keypad
  • Includes 9V battery
    • .......more details
877LM Manual
SEL2641R433-C2P

Erone 2-Relay Stand Alone Power Receiver 433MHz

  • Up to 85 transmitter keys
  • 1 NO relay + 1 NO/NC relay (230Vac)
  • Self-learning memorization
  • Relays with Pulse step or delayed operating mode.
  • Power requirements: 12/24Vac/dc
  • Dimensions: 140 x 115 x 53mm (5.5 x 4.5 x 2in)
    • .......more details
Installation ManualWireless System Chart
OSH-6113-ECB

Manaras Opera-SH 3/4HP 120V 1Ph with Electronic Circuit Board

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation ManualSell Sheet
OPH-6112-ECB

Manaras Opera-H 1/2HP 120V 1Ph with Electronic Circuit Board

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
  • 25 cycles per hour 100 cycles per day
    • .......more details
Installation ManualSell Sheet
LIMIT024

Manaras Double Snap-Action Limit Switch with Flat Lever

  • Replacement for LIMIT003
  • 2x SPDT - Unimax
  • Same as Doorlec # 21702
Limit Switch Chart
LIMIT021

Manaras Single Limit Switch with Flat Lever

  • Single limit switch (SPDT) used to stop the door at top and bottom or as disconnect switch
  • Unimax
  • Snap-action
Limit Switch Chart
MH5011U-LH

LiftMaster 1/2 HP 120 Volt Medium Duty Jackshaft Operator

  • 1/2 HP 120 volt 1 phase medium-duty hoist operator Logic board with integral 315 MHz radio receiver for Open/Close or Open/Stop/Close
  • CPSU commercial photoeyes included ( Nema 4 optional)
  • 4L V-Belt #48 drive chain adjustable friction clutch
  • Emergency disconnect and chain hoist standard
  • Solenoid actuated disc brake
  • Door speed approximately 8" to 12" per second
    • .......more details
Installation ManualManuel d'installationMH Sell SheetMH Shop Drawing
TIMER031

Manaras Timer 24/240V 1s-100h *** To Extent of Inventory

  • This timer-to-close can be added to any Commercial garage door opener.
  • Use with RELAY022 (8-pin base) if required.
  • Schneider Elect. part no. RE88867215
Adding a timer
RADIO-KIT004

Manaras plug-in receiver for Board 70 operators 390 MHz

  • Direct ECB plug-in receiver card kit (RADIO-RE101C) for adding or replacing on-site.
  • Maximum 16 transmitters per receiver.
  • Compatible with transmitters RADIOEM101 and RADIOEM103 SD/MD
RADIO-50

Manaras MCT-32 3-btn O/C/S transmitter 32 doors 313 MHz ** Replaced by RADIO-EM932

  • Open/Close/Stop remote for 32 doors.
  • By selecting A B C or D on the rotary switch and 1 to 8 on the other you can operate any of the 32 doors.
  • Comes with LED battery life indicator and 9V battery.
  • Can be wall or post mounted.
  • Must be used with 32 MCR series receivers.
Programming Instructions
RADIO-42

Manaras MCT-4 3-btn O/C/S transmitter 4 doors 313 MHz **Replaced by RADIO-EM932 or MV-00024

  • Open/Close/Stop remote for 4 doors.
  • By selecting A B C or D on the rotary switch you can operate any of the four doors.
  • Comes with LED battery life indicator.
  • 9V battery included.
  • Can be wall or post mounted.
  • Must be used with 4 MCR series receivers.
    • .......more details
Programming Instructions
RADIO-14

Manaras MR-1000 1-Channel 24V Receiver 313 MHz ** Replaced by RADIO-RE900

  • Controls one operator with MT series transmitters.
  • Operates on 24VAC.
  • A LED indicates that the unit has been activated.
  • Can be installed directly onto the control box of a Manaras operator.
Installation Instructions
RADIO-27

Manaras MT-1000 1-btn transmitter 313 MHz ** Replaced by RADIO-EM901 or RADIO-EM903

  • Open/Close remote for 1 door
  • Comes with LED battery life indicator
  • 9V battery included
  • Sunvisor clip included
  • Alternate part number: MN-100TI-A
Programming Instructions
7145.96

Whiting Bottom Seal For Coldsaver 96" long

  • Aluminum retainer sold separately
2704.162_180

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

  • Most common torsion spring for cube trucks
  • Specs: .162 x 2-3/16" x 18" Long
  • For Curbside order part # 2705.162*180
2705.162_180

Whiting Curbside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

  • Most common torsion spring for cube trucks
  • Specs: .162 x 2-3/16" x 18" Long
  • For Roadside order part # 2704.162*180
2235.296

Whiting Coldsaver Bottom Panel 14-1/2" x xxx" with lock seal and retainer (Max 96")

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick max 96" wide
  • Includes Lock and keeper
308302

Linear 2-Channel Multi-Code Key Ring Transmitter 310 MHz

  • Open/Close remote for 2 doors
  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 12-volt battery
  • Codes: 1024 codes for each channel (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
108210

Linear 1-Channel Multi-Code Key Ring Transmitter 310 MHz

  • Open/Close mini remote for 1 door
  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 12-volt battery
  • Codes: 1024 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
1336.1

Whiting Curbside Top Panel Closure Bracket for 10" radius

110554

Allstar MVP 1-Door O/C/S Receiver 318 MHz ***Replaced by P-831RE

  • Three channels - three relay outputs
  • 8-wire operator connection
  • Wire whip antenna with "F" connector
  • Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
  • Power: 24 VAC/VDC
  • Codes: 19683
    • .......more details
Programming Instructions
MVP-WKE

Allstar Wireless Keypad 110927 318 MHz *** NLA

  • Compatible with all MVP receivers and operators
  • 4-digit access code
  • Backlit keys
  • Operate LED
  • Power: 9-volt battery
  • Codes: 19683
    • .......more details
Programming Instructions
MCT-2

Linear 2-btn MegaCode Visor Transmitter 318 MHz

  • Activates two 318MHz MegaCode receivers independently
  • Test/operate LED
  • Visor mounting clip supplied
  • Power: 9-volt battery incl.
  • Codes: 1000000+ (MegaCode format)
  • Dimensions: 2.16" W x 3.75" H x .95" D
    • .......more details
Programming Instructions
ACT-34B

Linear 4-Channel Block Coded MegaCode Key Ring Transmitter 318 MHz

  • Compatible with all Linear access receivers and controllers
  • Supplied with quick-disconnect key ring
  • Power: Two CR2016 batteries incl.
  • Codes: Factory block coded in MegaCode format
  • RF frequency: 318 MHz
  • Dimensions: 1.25" W x 2.25" H x .48" D
    • .......more details
Programming Instructions
MINI-T

Linear 1-Channel Delta3 Key Ring Transmitter 310 MHz (DNT00026)

  • Activates one Delta-3 receiver
  • Test/operate LED
  • Key ring not supplied
  • Power: 12 V battery
  • Frequency: 310 MHz
  • Codes: 256 (set by dip switches)
    • .......more details
Programming Instructions
MDR

Linear 1-Channel MegaCode Receiver 318 MHz *** Discontinued

  • Activates one device
  • Wire lead antenna
  • Mounting bracket supplied
  • Memory: storage for up to 10 MegaCode transmitters
  • Power: 24 VAC/VDC
  • Codes: 1000000+ (MegaCode format)
    • .......more details
Programming Instructions
DRQP

Linear 1-Channel Delta3 Gate Receiver 310 MHz ** Available to extent of inventory

  • 1-Channel Gate Receiver
  • High-sensitivity short-range radio receiver
  • Operates in conjunction with the 9-inch local antenna (supplied).
  • Designed for use with automatic gate operators or systems where a remote antenna is needed.
  • Same as: DNR00013P
Installation Manual
8833T

Allstar 3-btn 3-Door Transmitter 108817 318 MHz

  • Open/Close remote for 3 doors
  • Compatible with Allstar and MVP receivers
  • Visor mounting clip supplied
  • Power: 9-volt battery
  • Codes: 6561 (set by trinary dip switches)
  • RF frequency: 318 MHz
    • .......more details
Programming Instructions
8833T-OCS

Allstar 3-btn 1-Door O/C/S Transmitter 109372 318 MHz *** To Extent of Inventory

  • Open/Close/Stop remote for 1 door
  • Compatible with 3-channel Allstar and MVP receivers
  • Portable transmitter
  • Easy access to battery and coding switch
  • Power: 9-volt battery
  • Codes: 6561 (set by eight trinary dip switches)
    • .......more details
Programming Instructions
535T

Allstar 3-btn 27-Door O/C/S Transmitter 107475 318 MHz ***Replaced by P-535T

  • Open/Close/Stop remote for 27 doors
  • Compatible with 3-channel Allstar and MVP receivers
  • Stationary mounting
  • Easy access to battery and coding switch
  • Power: 9-volt battery
  • Codes: 6561 (set by eight trinary dip switches)
    • .......more details
Programming Instructions
MCT-3

Linear 3-btn MegaCode Transmitter 318 MHz ** Use MTS3

  • Activates three 318 MHz MegaCode receivers
  • Test/operate LED
  • Visor mounting clip supplied
  • Two CR2032 batteries included
  • Codes: 1000000+ (MegaCode format)
  • Dimensions: 3" W x 1.875" H x .625" D
    • .......more details
Programming Instructions
41A2816

Jobber Drive Gear for Chamberlain Sears LiftMaster residential operators

  • Drive gear for Chamberlain / LiftMaster / Sears residential garage door openers built 1984 +
  • This is an excellent quality aftermarket product
HAE00014

Linear Pulley and Bracket - Chain (HCT)

HAE00018

Linear Inner Slide Assembly - Chain (HCT)

  • For LSO50 LDO33 & LDO50
HAE00032

Linear 8ft Chain Assembly (HCT8)

HAE00049

Linear Drive Sprocket Holder and Belt Clamp

HAE00013

Linear Turnbuckle Assembly - Chain (HCT)

HAE00022

Linear Inner Slide Assembly - Belt (HBT)

218189-01

Linear Trolley Assembly

218954-03

Linear Pulley & Bracket Assembly - Belt (HBT)

HAE00002

Linear Safety Beam Set *** No Longer Available

  • Set includes: Sender and Receiver photocells wire and connectors
  • Safety beams will work with all Linear operators that currently have safety beams installed.