Devanco Canada - Get The Right Garage Door Opener‎ and Parts

2G-LEFT

Rolling Steel 2" Curved Stamped Endlock Left Hand

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are at both ends of every slat.
Rivets included with endlock

18212

Limit Switch LS2 G3M Female

For use with Rite-Hite dock levelers

BEARING047

Manaras Flange Bearing 2-Bolt Black for 1' bore

2 set-screw holes 1/4-28 at 90 degrees. Set-Screws NOT included
Replaces BEARING012

MA020T

LiftMaster Mega Arm Tower Replacement Cover

Mega Arm Tower Cover.
Compatible with LiftMaster® Barrier Gate Perimeter Access Systems Operators.

SPR50B36X114

Sprocket 50B36 1-1/4" shaft 1/4" KW

36 tooth sprocket for #50 chain
Does not have any set screws

MA005

LiftMaster Gear Reducer 60:1

Replacement Gear Box (60:1).
Compatible with LiftMaster MADCBB MATDCBB MASTDCBB

308301

Linear 2-Channel Multi-Code Key Ring Transmitter 300 MHz

Open/Close remote for 2 doors
Compatible with 300 MHz Multi-Code receivers and Model 109950 and 302850 receivers
Easy access to battery and coding switches - 10 dip switches
Power: 12-volt battery
Codes: 1024 codes for each channel (set by dip switches)
RF frequency: 300 MHz

.......more details

Programming instructions

MG00006

Micanan Hex Nut 1/4-20UNC

3 required per operator

MF00045

Micanan H.H Slotted Self Rounding Washer Head Screw 8-32UNF x 3/8"

EHJW-353-3/4

Doorlec Industrial Jackshaft Op. Watertight ECB 3/4 HP 575V-3Ph

Equipped with: 3-btn control Adjustable Automatic Friction Clutch Emergency Chain Hoist and Heavy-Duty Solenoid Brake.
With DC-2000 controller
Watertight and Dust Tight EEMAC Type 4/12

2376.200.30.850

Whiting Torsion assembly .200 wire size 30" spring length 85" shaft

37557R

Genie Chain Drive Bullet Assembly

This Genie chain drive bullet assembly is the white piece that holds the chain for the garage door opener together.
Works with chain model Genie garage door openers that have a C-Channel rail.
The chain carriage assembly for these models also attaches to this chain bullet assembly allowing it to move the garage door open and closed up and down the rail.
Assembly contains: The 2 Bullet side white pieces and the four screws to install it
Compatible with Genie models that have a chain rail: 1028 2028 3020H 3020H-B 3024 4024 3022 3042 3120H 3120H-B 4022 4042 4124 4164 (ChainMax ReliaG IntellG and TriloG series with these model numbers)

WHITING-ALUMCLAD

Whiting Special Order Aluminum Clad Roll Up Door Price by Quote Only

Special order to customer's specs
A prepainted aluminum facing added to plywood core dry freight door
Premium grade 7 ply 3/4” panels manufactured with a medium density overlay (MDO) laminated to smooth hardwood outer veneers of Transportation Core plywood all designed for optimum strength and appearance.
2" track and rollers for durability.
Tongue and groove joint.
2 cable balancer with independent spring for each cable. Springs treated with rust preventative.

.......more details

BK338/PR

End Bearing Plate Flanged 11-GA 3-3/8" with Bearing. Commercial Sold as a pair

For commercial applications Used on wood jambs
Includes (1) RH and (1) LH plate with bearing
EBF338

SPP2905-TC

Telco SpacePak Diffused Proximity Photoelectric Sensor with 5m Cable

Multi-voltage diffuse proximity photoelectric sensor with a detection range of 5 meters without the need for a reflector.
Operation mode and max sensing range: Diffuse proximity: 0-5 m
Compact rectangular housing (50 x 50 mm x 17mm)
Power output and signal level indicators

User manual Manuel d'utilisateur Spec sheet

106-0005

Rodent Block Pull Chain Seal 2"

Often overlooked and left unprotected the opening for the pull chain on dock levelers is an ideal entry point for mice and rats.
The chain provides a built-in ladder for pests and the chain opening is more than big enough for rats or mice to squeeze through.
Features solid cast aluminum construction easy to install and completely cover the chain opening.
The seals are designed to sit completely below the surface of the dock plate and will not interfere with material handling equipment.

GH-383-3/4

Doorlec Industrial Jackshaft Door Operator 3/4 HP 208V 3P with ECB

Custom-designed extra heavy-duty industrial-type electric door operator
Worm gear reducer 40:1 ratio
#60 roller chain and sprockets from operator shaft to door shaft.
Door speed: 7 inches per second (approx.)
Adjustable torque limiter
Rotary type limit switches

.......more details

MYQ-SGC1WLM

LiftMaster Smart Garage Camera ***No Longer Available

The LiftMaster Smart Garage Camera™ is compatible with all myQ connected garage door openers.
It works directly with all LiftMaster openers with the Wi-Fi logo and can work with most garage door opener brands manufactured after 1993 when paired with the myQ Smart Garage™ Hub(821LMB).
myQ Connected: monitor the garage through a live feed or recorded event using the myQ app.
Video camera begins recording when motion is detected.
Easy setup with Bluetooth and magnetic mounting base.
Enables secure in-garage delivery for Amazon Prime packages

.......more details

MK-00806

Micanan Heater Probe in Control / Limit Box 24V 20W 2" long Field Install

MOTOR350-WIRED

Manaras Electric Motor 1 HP 120/240V 1Ph Wired

Continuous duty C-flange ODP 60Hz

50324

Doorlec Drive Shaft Kit ETB-3

XBA8

NICE Apollo Red/Green Internal Traffic Light Module

This module makes your barrier shine red and green signaling oncoming traffic when it is safe to pass through the barrier. Designed for M-Bar and L-Bar barrier gate operators.

MX00148

Micanan Complete Clutch Shaft Assembly for PRO-J

OVIEW-IBT4

NICE Handheld Oview Display Programmer with IBT4 Interface Module OVIEW/A

Required for programming barrier gates

BPE-50

EMX Industries Battery Powered Through-Beam Photocells EMX-1500-1

Thru beam configuration
90° adjustment left or right
The transmitter and receiver use 12-24 VDC/AC but the BPE-50 can also be powered by two 3.6-volt lithium batteries (Batteries Included)
50 ft. operating range
Size: 4.4" (112mm) x 2.05" (52mm) x 1.3" (33mm)

SEIGN-TRAD-R16

Garex Ready to Install Door Special Order

R16 Insulation - Overlay moldings can be custom positioned to create the square or rectangle desired look - Moldings are factory white or can be painted to match door colour - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

PREM-SEL-XL-R16

Garex Ready to Install Door Special Order Premium Select XL R16

R16 Insulation - Long Panel - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

2806.177*230

Whiting Spring Assby .177 x 2-3/16 x 23" Roadside

Replacement torsion spring with cones
Specs: .171 x 2-3/16" x 23" Long
Roadside
For Curbside order part # 2807.177*230

CP-SH-34-MC3

Lynx Complete Limit Shaft Assembly #41 Chain

For trolley operator

20650

Coax Cable Extension Adapter

Adapter with “F” socket
Connects two coax cables to extend length

MOTOR359

Manaras Electric Motor 1 HP 208/480V 3Ph

Continuous duty C-flange ODP 60Hz

6X30PO50

Devanco Loop 6' x 30' pave-over 50' lead-in

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

RADIO-RE901B

Manaras Open/Stop/Close 24V receiver Nema 4/12 313 MHz

Wall mount
Fixed code / Dip switch technology
Commercial reciever( Learn button) 1-door
16 Fixed codes / Receiver
Nema 4/12
Approx 100' range

.......more details

MGR20-Y-2U-PER-FT

Miller Edge Sensing Edge Round Yellow 2-Wire Universal Outlet Sold Per Foot

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
Non-monitored edge
Maximum length is 10ft (over 8ft requires LTL shipment at additional cost)

ETB-321-1/2HP

Doorlec 1/2HP 230V 1PH Trolley Door Opener

Trolley model heavy-duty door operator designed to provide smooth dependable operation of sectional overhead type doors.

3709-4220

Strap 2" w/Ratchet & Double J-Hooks 20ft Long

Polyester strap 2" wide
Work load limit 3335 LBS

JB-02P-W

Miller Edge Junction Box Nema 4

For use with commercial door operators and CPT sensing edges from Miller Edge
Waterproof
Accommodates wire .181 to .312

Installation instructions

10.1003.150

Whiting Step Bolt Stainless Steel 1-3/8"

2650-115-12

Linear HSLG #40 Chain 46 Feet

Purchased in conjunction with a gate opener

ME00018

Micanan Keyway 3/16 SQ x 1-1/4" Long

ALUM-536

Aluminum 24" x 100' Spool Dover Gray / Gris Granite # 536

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 536
Reverse side is #431 Bright White

Colour chart

SHAFT120

Manaras Input Shaft for OSHW

.192-134-L

Cut-to-Length Torsion Spring .192 x 1-3/4" Left Hand Wound Silver

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

RBH105L5-LH

LiftMaster 1 HP 575 VAC 3 PH Comm. Hoist Op. Logic 5 Left Hand

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

7-2240

Richards-Wilcox 3" Roller 7/16" Shaft Dia x 9" Long Shaft Super 3 *** Call for Availability

Original Richards-Wilcox part

7-2239

Richards-Wilcox 3" Roller 7/16" Shaft Dia x 5" Shaft Length Super 3 *** Call for Availability

Original Richards-Wilcox part
Roller diameter is 3" good for a 3-1/4" track
14 Ball

950-189

Richards-Wilcox 2" or 3" Single Bottom Cable Bracket Right Hand

J505L5

LiftMaster Industrial-Duty Jackshaft 1/2 HP 575V 3Ph L5 ***Discontinued

Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
J operators are attached to the door jackshaft to indirectly drive the door
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0® safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you

0/7530/249

Automatic Systems 5/8 Left Hand Rod End with Zerk

Used on the BL229 gate op.

10W8

Resistor 10W 8K OHM

TRACK-SET-2STD-12

2" Tracks Set 12'-0" Torsion 1-3/4" Door Clips for Wood Frame 12" Radius *** By quote only

KP-680-ETL

Koala Air Blower 1/2 HP *** Indef. Delivery

Powerful extra quiet and energy efficient 1/2 HP motor
115V / 1 Speed
Durable super lightweight and compact Polypropylene housing design
ETL/CETL Safety Certified

SPR50B36X1

Sprocket 50B36 1" shaft 1/4" KW

36 tooth sprocket for #50 chain

12502

Doorlec Clutch Plate Aluminum 4" dia x 5/8" bore

Works with model LJ/LJH

AW-10

Miller Edge Air Wave Switch Only No Enclosure

Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
Applications: commercial sectional doors rolling doors and mass transit
Works on doors up to 60ft
Can be used with standard pneumatic hose and Miller Edge extrusion
Sensitivity: 2mm to 500mm
Ambient temperature range: -49F to 180F

.......more details

Instruction manual Sell sheet

SF375-W

Spring Fitting 3-3/4" Winding Side Only

Universal thread for use in either LH or RH wound springs.
Maximum wire size diameter: .4062".
Set screw installed: 3/8"-16 x 1-1/2" (2).
Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
Winding bar hole 5/8"

SPRING040

Manaras Disconnect Spring

LPWKP-G

Linear MegaCode Wireless Keypad 318 MHz Cool Grey **** Replaced by NMTK

Activates multiple MegaCode receivers
User selects 1 to 6 digit PIN number or 1 to 6 letter PIN name
Programming is easy via the keypad; MegaCode receiver auto-learns PIN
Backlit keys for easy viewing
Wall mounting hardware (2 screws and anchors) supplied
Power: Three AAA batteries

.......more details

SABLOP/12X

Automatic Systems Red LED Lighting Module for Arm

BCSI-PM12

Pivin Drapeau Clutch Disk for BCSI Gate Operator ** Price by Quote Only

Phenolic Friction Disc

M7A

Safety Inertia Brake 1-1/2" Bore 6266 Torque

Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
Ideal for commercial and industrial use; specifically with rolling shutters and rolling doors.
Normal Torque: 6266 lbf.in
Locking Torque: 29199 lbf.in

Reference manual Technical data Sell sheet

MT22-GRAY-LH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot Gray

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

MT22-MON-GRY-LH

Miller Edge 4-Wire Monitored Pressure Sensitive Edge Gray Sold per Foot

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

41D9276

LiftMaster End Panel Logic Board

041D9276 is a End Panel for Receiver Logic Board with LED Light Connector Replacement Kit.
For use with LiftMaster® and Chamberlain® Garage Door Openers Powered by myQ®; manufactured after 2018
Compatible with WLED model

Z9966

Deuer Cable Puller

Light duty wire and cable gripping tool
For wire 1/16" - 1/4" diameter
Recommened for residential use only
1300 lbs. capacity

MD-00252

Micanan Connecting Link #50

MD-00515

Micanan Roller Chain #50 Waterproof 10' Pack

Q025

LiftMaster Motor Pulley 2-1/2" OD 1/2" Bore (K17-50098)

Replacement motor pulley of motor output shaft for Liftmaster Elite models SL3000UL and CSW2000UL

Q028

LiftMaster Manual Crank for SL3000 (K07-50303) **DISCONTINUED

Hand crank for SL3000

PPV3M

LiftMaster Passport MAX 3-Button Visor Remote

Provides total control with one remote for gated communities and commercial properties.
Compatible with the PPWR Receiver for gate access control all 315MHz Security+ LiftMaster and Elite Series Gate Openers and all LiftMaster Garage Door Openers manufactured since January 1995
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)

MOTOR009

Manaras Electric Motor1/2HP 120/240V 1PH

Instant reverse intermittent-duty electric motor only for MTBL MJ MJH MTH & MTBH models
1725 rpm built-in reset

MGH-6535-ECH-RH

Manaras 1.5 HP 600V 3P Jackshaft with Elect. Circuit Board Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

PRO-GHC-10053U-R

Micanan 1 HP 575V 3P Gearhead Operator with N1 Eyes Monitored ECB Right Hand

External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation
Full function Smart 10.0 logic board and on-board receiver

.......more details

OSH-6212-ECB-LH

Manaras Opera-SH 1/2 HP 240V 1Ph with Electronic Circuit Board Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"

Installation Manual

HCT10

LiftMaster HCTDCU Rail Only for 9'6" Door

Yellow zinc dichromate premium rail finish offers maximum rust protection in open-air environments.
Heavy-duty 12-gauge C channel corrosion resistant steel track.
This DOES NOT include the head unit

MK-00034

Micanan Overload Reset 1-Phase 5 Amps

PRO-4X_MOD_3HP

Micanan Nema 4X Modification 3HP

This modification provides a washdown motor N-4X corrosion proof stainless steel control box enclosure waterproof drive and limit chain and a corrosion proof three-button station.
For options M & U Micanan N-4X photocells are supplied
For 3HP motors

.421-514-L-C

Cut-to-Length Torsion Spring .421 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-514-INSTALLED

.319-514-R-C

Cut-to-Length Torsion Spring .319 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch. Cones sold separatly.
For factory installed cones order part # C-514-Installed

.295-2-R-C

Cut-to-Length Torsion Spring .295 x 2" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.283-334-R-C

Cut-to-Length Torsion Spring .283 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

.262-258-R-C

Cut-to-Length Torsion Spring .262 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.218-258-R-C

Cut-to-Length Torsion Spring .218 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.218-134-L-C

Cut-to-Length Torsion Spring .218 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

MAG-3

Magnetic Accessories Kit 3-Piece Combo

The MagTool clipboard tape gun and box all come with an integral 100lb. magnet which allows them to be easily stuck and removed from a metal surface.

PRO-GH-5083U-R

Micanan 1/2HP 208V 3P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PRO-HB-7523U-LH

Micanan 3/4HP 230V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

T2-HBAG

Manaras Trolley Hardware Bag

Various fasteners

PRO-HB-5025U-RH

Micanan 1/2HP 220V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

PRO-HB-5023U-RH

Micanan 1/2HP 230V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

MOTOR281

Manaras Electric Motor TEFC 1 HP 208/480V 3PH for N4/12 Applications

Electric motor only- not wired
Continuous duty base mount 56Z

PRO-H-5038-U-LH

Micanan 1/2HP 380V 3P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL
On-Board receiver holds up to 20 transmitters