Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Limits
ALUM-525

Aluminum 24" x 100' Spool Black / Noir # 525

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 525
  • Reverse side is #431 Bright White
Colour chart
TUBE_SHAFT_12FT

Hollow Shaft 1" x 12'-10" Galvanized 16 gauge

  • When ordering order one foot longer that actual door width
XT2564-CUT

Xcluder Rodent Block 4" Black Sold per Foot

  • For commercial and residential applications
  • Creates a tough barrier that is virtually impenetrable to rodents
Sell Sheet
98875

Marantec Shark Tooth Position Reference Tab Chain Rail

  • For chain rails.
  • This part is installed inside rail on the actual chain.
  • This part works with the reference switch to determine the open & close limits of the garage door.
  • Reference switch part # 104083
PS243F

Adjustable DC Power Supply 6V/12/24V 3 AMP

  • 3 preset output voltages : 6/12 and 24VDC (an adjustable mode is also available with a jumper setting)
  • Full adjustment from 2 to 24VDC if required
  • Maximum 3 amp (Output at 70 deg. F and free air)
  • Regulation:97.5%
  • Maximum input voltage 36 volts
  • Fuse protected
    • .......more details
Wiring Diagram / Diagramme de raccordementSpecifications / Spécifications
K74-30754

LiftMaster Battery Harness 1 unit only

  • For LA400
  • 2 harnesses required per operator- 1 for each battery
Z9207

Sensor Guards Sold as a Pair

  • Made to fit over garage door sensors
  • Will fit over most popular sensor brands
  • Protects sensors from coming out of alignment
  • Helps protect against water corrosion
  • Easily installs to the door track or the the wood door frame
  • Sold by the pair
    • .......more details
19-5114-NP

LiftMaster Trolley Roller Chain Pack #41 for 14ft Door Nickel Plated

  • For 3/4 & 1 HP trolley operators
K74-18382

LiftMaster Hall Effect Sensor Assembly **to extent of inventory

  • Formerly 76-G0541 G76G0541
  • For SW470 with GL or S3 Board SW490 with GL Board
LM21XPBB

LiftMaster Extended Performance Fire Door Release Device with Battery Backup

  • UL864 Revision 9 compliant
  • Programmable DIP switch delay setting - either 10 20 30 or 60 seconds delay of door release to permit passage clearance
  • Inputs for normally open 2- or 4-wire detectors and 4-wire normally closed detectors
  • Trouble and alarm relays for communication with the fire alarm control panel if required
  • Audible trouble sounder to indicate when the release device is not operational
  • On board diagnostic LEDs for easy troubleshooting
    • .......more details
Installation Manual
29-ABC-15

LiftMaster Fuse 15A

  • For VSL595 gate operator
T114

Manaras Trolley Track 14ft for 3/4HP & All APT models up-charge *Actual length 198"*

  • For models MGT/OTH/OTBH 3/4 hp only with Chain #41
25-2010

LiftMaster 10 Amp Overload Fuse

  • For models: SL585-50-11 SL595-50-11 SL575-50-11
AIRSWITCH009

Exterior Mosley Air Switch SPDT Plastic Housing ***NLA

CAPACITOR008R

Manaras Capacitor 440-648uf incl. Bleeder Resistor

  • Used for 3/4 HP 120/230VAC 1 ph motor255 374 & 258
  • Also for 1 HP 120/230V 1 ph motor350
MK00701

Micanan Smart 10.0 Full Feature Circuit Board Monitored with Heavy Duty Relays

  • For 1 HP 110/220V Single Phase 230/380/460V 3 Ph
  • The board has P1 & P2 terminals
Instructions Manual
LA400DC

LiftMaster Primary Actuator Arm for Single Gate Applications 12VDC New Version

  • New version has red stripe but will still work on the old LA400
Installation ManualManuel d'InstallationSell Sheet
H12G01-SS

Hinge #1 x 12 gauge Stainless Steel ***NLA

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
EP2986

Exhaust Port 5" non latching long barrel

  • 5" inside diameter 2" sleeve - non latching.
  • Includes fasteners & gaskets.
  • Polished aluminum finish.
MP-00044

Micanan Drive Chain #40 Modification for Trolley Operators 18' High Door In Lieu of #41

  • Chain modification when purchased with any of the following operators; PRO-T TB APT and GT
71-10345

LiftMaster RPM Sensor Board (MT only)

EAST/STL-E3

Rolling Steel 3" Cast Eastern Steel Endlock

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
GH753-L5

LiftMaster Gearhead with Brake 3/4HP 208/230/460V 3P L5

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
BK101/PR

Spring Anchor Bracket USA 8-Gauge sold as a pair

  • Universal spring anchor brackets - Residential/Commercial
  • Centerline adjustment: 3-5/16" to 6-3/4"
  • Bright zinc plated 8 gauge steel
  • No bearing
  • Bearing R5110 sold separately
510.3021.00

Whiting Stainless Steel Exterior Hardware Package with #77 Lock for Dry Freight Door

  • Optional package when a door is ordered. Includes SS rivets and installation.
41A7276

LiftMaster Wear Pads 4/pkg Square Rail Only

  • Fits square trolley rail only
  • Same as 183A163
36605A

Genie Pulley Assembly Belt Drive *** NLA

  • Genie 36605A PULLEY
  • For Belt Drive Models
  • For Chain lift Belt Lift ReliaG 600 & 800 1022 1024 1042 2022 2024 2042
  • Also for Overhead Door Models Legacy 800 & Standard Drive Belt
K22-36899

LiftMaster Single Phase Brake Solenoid L5

  • 4-wire connector for single phase
  • 120 volts on terminals 1 & 2 (closest to the plunger)
  • 240 volts on terminals 3 & 4 (farthest from the plunger)
Wiring diagram
27024

Doorlec Electric Motor TEFC 3/4HP 115/230V DC403

  • ase mount
Wiring diagram for 120VWiring diagram for 230V
41A5615

LiftMaster Chain Spreader

  • For models 2575 3575 3275 PD752 PD758 and others
TCR-1

Tri-Code Receiver Single Channel ** DISCONTINUED

  • Single channel receiver compatible with Linear Delta Multi-Code and Stanley radios
  • Three position direct connect tabs for commercial and residential garage door openers
Programming Instructions
BRACKET112

Manaras Wall Mount Stud Bracket

  • This Wall Mount Bracket can be used with all Manaras Wall Mount commercial operators except the MRGH and MGH models
  • Will not work will Trolley Operators
MD-00029

Roller Chain #41 Sold by the Foot

MK-00648

Micanan 1-Channel 24V Receiver with Antenna

  • Comes with antenna MK00719
  • Total of 20 regular remotes can be programmed or 200 of the block coded remotes MK-00660
Programming Instructions
CH501L5-RH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 115/230 VAC Logic 5 Right Hand

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with CPS-UN4 photoeyes
Installation ManualManuel d'InstallationSell sheetBrochure
V1001-B

Elton Dual Fin Vinyl Insert Black Price per Foot

41DB001-1

LiftMaster Circuit Board Assembly

  • For belt drive unit model 3500 (315MHz)
  • Assembly includes: Board end panel and light socket
  • Also known as 041DB001-1C
480LM

LiftMaster Alternate Mounting / Extension Kit for 3800 3900 8900W 8500 8500W

  • Enables the opener to be lowered due to obstructed areas and low ceilings
  • lowers the operator by 6" requires 1-1/2" above the door shaft
  • Installs quickly and easily
  • Same as 480LMB
  • Compatible with wall mount opener 98032 and 98022
Installation ManualManuel d'Installation
MDKP

Linear MegaCode Exterior Wireless Keypad 318 MHz

  • MDKP can transmit a unique signal for each 1-6 digit PIN code entered.
  • It has a built-in radio transmitter with a 250-foot range in line-of-sight conditions.
  • Access codes are programmed into the access controller or receiver the maximum number of codes possible depends on the receiver model used.
  • Features Include:
  • Internal antenna
  • 1-6 digit PIN for each user
    • .......more details
Installation Manual
50-104-1

Black Coil Cord 2-Wire 18-ga 20 ft. Extended Curly Cord

  • Retracted Length=4 Feet Extended Length=20 Feet 2 Wire 18 Gauge Cord Type SJEO
882LMW

LiftMaster Multi-Function Control Panel Wi-Fi

  • Push button for garage door operation
  • Program remote controls Wi-Fi Garage Door Openers and MyQ® enabled accessories directly from the control panel
  • Light run-time is 4 1/2 minutes with adjustable light timer option
  • Lock feature designed to prevent operation of the door from portable remote controls
  • Compatible only with LiftMaster® Security+2.0™ and Wi-Fi garage door openers
  • Equivalent to Chamberlain's 41A7185
    • .......more details
Programming instructionsInstructions de programmation
.273-2-L

Cut-to-Length Torsion Spring .273 x 2" Left Hand Wound Orange/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.225-2-L

Cut-to-Length Torsion Spring .225 x 2" Left Hand Wound Orange/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
12FT-I-BEAM

LiftMaster 12' I-Beam Rail G3712RV / CD1012

.273-134-L

Cut-to-Length Torsion Spring .273 x 1-3/4" Left Hand Wound Orange/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
855LM

LiftMaster HomeLink Repeater Kit

  • This kit contains a repeater and a transmitter
  • The HomeLink repeater is only compatible with HomeLink equipped vehicles
Programming Instructions
L0172-092

Low Temperature Grease 10oz Tube

  • Lubriplate multi-purpose low temperature grease.
  • Excellent cold operating characteristics
PMT20KIT

Carlo Gavazzi PMT20RI & PMT20I Thru Beam Kit

  • Suitable for exterior applications NEMA 4
  • Multi-supply voltage 12-240VDC 24-240VAC
  • LED indication for power supply and target detected
  • Not recommended for carwash applications
  • Operating temperature -25 to +55 C
  • Terminal 5 Common "NO" on Terminal 4 "NC" on Term. 3
    • .......more details
Installation Manual
MV00077

Interlock Switch for Sectional Doors

  • Mounts on the door track to prevent the use of the operator when the door is locked
CPS-UN4

LiftMaster Commercial Protector System Thru-Beam Eyes NEMA4

  • Waterproof photoeyes.
  • for direct connect to operators with Logic boards. L3 L4 L5
  • Receiving Eye - A: 50-50997 Sending Eye - A: 50-50998
  • These eyes will also work on the Micanan UL325 monitored operators
Installation ManualManuel d'InstallationSell Sheet
K001A5566

LiftMaster GL Replacement Board ***Discontinued. No Replacement. NLA

  • Replacement Logic Board for LiftMaster Gate Operators
  • Fits Slide operator SL570 SL575 SL580 SL585 SL590 SL595
  • Fits Swing operators SW420 SW470 SW490
ME123-YELLOW-LH

Miller Edge Yellow Left Hand Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualWorksheetSell Sheet
977LMC*

LiftMaster Wireless Keyless Entry 390 MHz - DISCONTINUED

  • Wireless Keyless Entry with 390 MHz rolling code
  • Compatible with all 390 MHz Chamberlain (LiftMaster) residential and commercial door openers and gate operators
  • Mounts easily to the door jamb with two screws
  • Compatible with Security+ Systems with amber learn LED
  • Compatible with models built from 1997-2005
  • Includes 9V battery
    • .......more details
.283_2-5/8"-LH

Torsion Spring .283 x 2-5/8" x 12ft LH White

  • Wire size: .283
  • Inside diameter: 2-5/8"
  • Length: 12 ft
365LMC

LiftMaster Universal Plug-in Receiver 315 MHz

  • Compatible with any garage door opener with a simple 2-wire dry contact
  • Includes 2-conductor bell wire
  • Able to accept 8 Security+ transmitters & 1 digital keypad
  • Compatible remotes; 893MAX 890MAX 892LT 373LM 371LM 374UT 375UT
Programming InstructionsInstructions de programmation
891LM

LiftMaster 1-btn Transmitter Sec+ 2.0

  • Controls a single garage door opener or gate operator or MyQ® enabled light accessory
  • Equipped with Security+2.0™ rolling code technology that virtually eliminates radio wave interference
  • 3V lithium battery included
  • Compatible only with Security+2.0™ LiftMaster® garage door openers or gate operators
  • Equivalent to Chamberlain's 950ESTD
Programming InstructionsInstructions de programmation
30B532

LiftMaster Capacitor 53uF-64uF 220V

  • For 1/2 HP models
  • Dimensions: 1-5/16" diameter x 4-3/16" long (including the terminals)
41B5424

LiftMaster Belt Idler Pulley and Bracket (Built Years 2000+)

  • This is a Belt Pulley Bracket Replacement Kit. For use with various LiftMaster® and Chamberlain® Belt Drive Garage Door Openers that utilize a T-rail
  • Fits models: 2500 2580 3280 3850 3500
R-831-J

FL-Allstar 1-Door O/C/S Receiver in Oil Tight Case (JIC) 107478-311 MHz **NLA

  • This receiver is included in a JIC box.
  • Like the model R-831-P it has three isolated contacts to open close and stop the doors and a possibility of 6 561 operational codes to enhance the security level. If your operator can be controlled by three button station then our R-831-J receiver and commercial remote controls will work with your operator.
  • Manufacturer's model number: 190-107478
  • Dimensions: 9 1/4" x 6 7/8" x 1 1/4".
Programming Instructions - Dip Switch VersionProgramming Instructions - Learn Button Version
19-48HL

Half Link #48

  • Half link for #48 chain (#410)
41A5021-I

LiftMaster Electronic Circuit Board Assembly ** Discontinued. No Stock Left

  • Assembly includes: Logic board end panel and light socket
  • For chain drive models with 2-lights
  • Fits 1265 Security + 390MHz
  • Also known as; 41A5021 41A5021-B 41A5021-C 41A5021-D 41A5021-E 41A5021-F 41A5021-G 41A5021-H
MJ00014

Micanan Brake Shoe and Drum Assembly for Gearhead

  • For Micanan gearhead models: GH GHC GSD
  • Assembly includes both right & left shoe and the drum
877LM

LiftMaster Sec+ 2.0 Keyless Entry

  • Features Security+2.0™ rolling code technology
  • One-button-to-close feature
  • Temporary password option
  • Program code directly from keypad
  • Backlit keypad
  • Includes 9V battery
    • .......more details
877LM Manual
RADIO-EM103SD

Manaras 3-btn transmitter configured as O/C/S 1 door Rolling Code 390 MHz

  • Open/Close/Stop remote for 1 door
  • Operates single door: O/C/S configuration
  • LED indicator CR2032 battery and visor clip included
  • Field Selectable: Jumper inside the remote can be positioned to Single Door (SD) or Multiple Door (MD)
  • Compatible with Manaras operators manufactured after August 2013 with control board070E & board070M.
Manual
7470.115

Whiting Side Seal for insulated doors 115" Long

  • Fits Coldsaver and Tempguard
HAE00047

Linear Complete Gear Set with Grease

  • Set includes: Helical gear worm gears and grease
  • Helical gear measures 2-7/8" diameter
1003-6.5"-100FT

Bottom U-Rubber 6.5" Black 100' Long

  • 100ft spool of vinyl insert.
1015-1-3/4-16'

Rigid Vinyl Bottom Retainer Raised Centre 16' Long

  • Black - for door thickness of 1-3/4"
1006-1-1/2-10'

Rigid Vinyl Bottom Retainer U-Shaped 10' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-1/2"
1003-1-5/8-10'

Aluminum Bottom Retainer L-Shaped

  • For 1-5/8" thick doors.
28-02101

Truck Door 2" Vertical Track and Right Angle Assembly 106.5" Roadside (LH) for Whiting Roll-Up Doors

  • SPECS: Length: 106.5" Fits door sizes: 91" - 100" high
  • Assembly includes: Right angle mounting track Vertical track and Torsion bracket
  • Cross Reference: W #2275-2
  • Galvanized steel 14 gauge construction
  • Tongue and groove for proper alignment at joints
DM11VL

Cable Drum Vertical Lift 11' 850-11 Pair

  • 11' Vertical Lift aluminum die cast alloy.
  • 3/8"-16 x2" hardened cup point set screws installed with red heads.
  • Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH. Max. Door Height: 11'-1".
  • Rated Lift per Drum: 425 lbs.
  • Max. Cable Diameter: 3/16".
  • Mounting: 1" solid shaft with 1/4" keyway.
    • .......more details
SF200

Spring Fitting 2" Pair

  • Unviversal thread for use in either LH or RH wound springs.
  • Pair includes: (1) winding and (1) stationary.
  • Maximum wire size diameter: .3065".
  • Set screw installed: 3/8"-16 x 1" (2).
  • Mounting: 1" tube or solid shaft
  • Winding bar hole 1/2"
    • .......more details
25-10113**DISC

Truck Door 2" Steel Roller Long Stem for Whiting Roll-Up Doors Use Part # 94-61180-33-84

  • Unplated shaft 10 roller ball design
  • Shaft Length: 6.5" Overall Length: 7.5"
  • Long stem roller has a staked collar design versus machined collar on others.
D-TEK-MVP

EMX Industries 9-220 volt Loop Detector 2550-1

  • Wiring harness ( HAR-11) sold separately
  • Warranty 2 years
  • Aluminum RF shield housing
  • Loop diagnostics
  • Frequency counter
  • Control contacts (gold plated)
    • .......more details
Installation ManualSpec Sheet
1104-8FT-GREY

Residential Side & Top PVC Weather-Strip with cap 8' Long - Grey (G)

  • Grey rigid vinyl retainer with grey flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1116633121.S

Overhead 1-btn Transmitter 312 MHz ** No Longer Available

  • Replaces the 1091303121.S
  • 1 channel transmitter opens and closes 1 door
  • Codes using 9 dip switches with 3 positions
  • Battery (ALK12V) and visor clip included
  • Compatible with all Overhead Door 312 MHz frequency garage door openers that were manufactured before 1996.
V300-TS

Top Seal Weather Strip 100 ft per Roll

  • For use with bottom retainers installed on top of door.
  • Vinyl: Black
02-103

Push Button Station 3-btn Surface Mount Metal Housing

  • PBS-3
  • Open-Close-Stop
  • Momentary contact
  • Nema 1
  • Dimensions: 5-5/16" H x 2-3/8" W x 1-13/16" D
831-R

Allstar 1-Door O/C/S Receiver 107480 318 MHz ** To Extent of Inventory

  • Three channels - three relay outputs
  • Textured aluminum case
  • Terminal strip for wiring
  • Wire whip antenna with "F" connector
  • Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
  • Power: 24 VAC
    • .......more details
Programming Instructions - Dip Switch VersionProgramming Instructions - Learn Button Version
42413

Pillow Block Bearing Housing Set GP-3

  • Can be fitted with bearing # 28301
SRB-2

Standard Riser Bracket 2" Above Dock

  • Standard 2" Riser Bracket for 6" Above Dock Door or Less
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
PRO-GH-10053-PNL

Micanan 1 HP 575V 3P Gearhead Operator NO CONTROLS

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
7145.96

Whiting Bottom Seal For Coldsaver 96" long

  • Aluminum retainer sold separately
CP-LX740

Lynx 3-btn Transmitter 372 MHz for Commercial Op. with UL325 Board

  • UL325
  • Works on the new Lynx commercial operators
  • For 3 doors
  • Not compatible with the new 372HMz residential operators
Programming instructionsCompatibility chart
GH4416-09-R

Green Hinge #9 12-ga Right Hand *** No longer available

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
7-6119

RW Hanger 333 Truck & Pendant Sold Individually

  • For use on 333 square track
030DCT

LiftMaster Receiver Logic Board Kit Sec+ 3.0

  • 030DCT is a Receiver Logic Board Replacement Kit for Security + 3.0 Garage Door Openers.
  • The unit will feature a white learn button.
  • Compatible with LiftMaster residetial Garage Door opener models: 2100 2300 2220L 2420L 6580L 4690L 6690L
  • This circuit board is covered by a one year warranty
MYQ-KH1VXXW

LiftMaster Smart Garage Video Keypad Power Adapter Kit

  • Worry-Free Operation: Plug in using the 25-foot power cord for uninterrupted monitoring.
  • Never needing to charge or replace batteries means your garage is always accessible and secure.
  • Easy Installation: Set up in minutes with minimal tools required
  • Whole-Garage Visibility: Use the adjustable swivel mount to position your Video Keypad for maximum visibility.
  • See more of what you want and thanks to the discrete and concealable power cord see less of what you don’t.
  • Extended Reach: Position your Smart Garage Video Keypad wherever you want it and use the 25-foot power cord to connect to any standard outlet.
    • .......more details
K15-50B18QGX

Output Sprocket for SL595 and SL595UL

  • This is a replacement Output Sprocket. Compatible with LiftMaster® Model SL595U Slide Gate Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
D0MKTRP017

DURULITE STD-IND V-CAM CAST ASSEMBLY KIT

  • -Cam Assembly Kit for Chase Doors Standard DURALITE model doors. fits 90 x 90 spec door.
0824-2-WHITE

Elton Commercial Window 2" thick Door 0824 White Frame Sealed Glass

  • Screw together window kit
  • Thermal window
  • Frame size: 23 15/16" x 7 15/16"
  • Cut-out size: 23-1/8" x 7-1/8""
  • Vision area: 21-9/16" x 5-1/5"
  • Different glass options and frame colours are available upon request
    • .......more details
TDC22X1BMC

LiftMaster MAXUM Trolley DC Comm. Op 3/4HP Equivalent 120/240V 1PH 60 Cycles/Hr 2200LB

  • Smooth Start/Stop Operation - DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator.
  • Faster Speed - Average of 12” per second opening on sectional doors.
  • Battery Backup Option - (battery backup kit sold separately).
  • Floor-Level Wall Controller - 4-line LCD display gives you access to programming troubleshooting and diagnostics at floor level saving time and money.
  • Wi-Fi® and myQ® - Easily connect to myQ Facility via Wi-Fi for visibility into what is happening at your door and control it from your web browser; no need for additional hubs or accessories. Know what accessories activate the door (remote transmitter keypad etc.)
  • Drive Type 65:1 Gearbox with #50 Chain Output
    • .......more details
1222_DUAL_TROLLEY_14'

LiftMaster Dual Trolley kit for 14' high door includes #41 Chain for 14ft High Door Angle tracks (2x) 14' (Actual length 227") and (1x) shaft

  • Provides a second drawbar-type operation on wide standard door
  • Includes 14ft tracks #41 chain hardware & Round Bar 1" x 20'
  • Works with TDC12 & TDC22 Maxum operators
63000709

FAAC P Limit Switch Magnetic 746/844 (Rack)

  • Compatible with the 746 and 844 motors
  • Replaces discontinued FAAC Part; 7580375
C12

Felco C9 Cable Cutter 3/8" Capacity

  • The FELCO C12 a two-hand wire and cable cutter designed for precision.
  • Made with unbreakable forged aluminum handles and high-quality hardened steel blades
  • The triangular cutting system allows for clean cuts without crushing the cable while the ergonomic design provides comfort and efficiency.
  • Length: 19.69 in
  • Weight: 3.75 lb
  • Cutting diameter: 0.47 in
    • .......more details
GALV-273-334-L

Cut-to-Length Torsion Spring .273 x 3-3/4" Left Hand Wound Galvanized Orange/Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
GALV-243-258-L

Cut-to-Length Torsion Spring .243 x 2-5/8" Left Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
LPEXP

LiftMaster CAPXL Loop Detector Input Board

  • Automatically trigger a phone call to a guard or office when a guest arrives
  • Mounts inside of CAPXL
  • Works with CAPXL and LOOPDETLM Plug In Loop Detector (Each sold separately.)
  • Operating Temperature -20°F to 130°F (-29°C to 54°C)
  • Dimensions: 2.8” x 2.3”
GHX-353-1HP-RH

Doorlec Explosion Proof Gear Head 1 HP 575V 3PH ECB Right Hand

  • Nema 7/9 control box
  • Electrical connections from motor to control box consists of hazardous location certified fittings
  • NEMA 7/9 O/C/S push-button station included