Devanco Canada - Get The Right Garage Door Opener‎ and Parts

Z9967

Roller Chain Puller *** To Extent of Inventory

Allows chain to be pulled together for attachment of the master link
For 35 thru 60 chain

MP-00024

Micanan Auxiliary Chain Disconnect for Pro-T TB

Allows for operation of a door by an auxiliary chain hoist.
Hoist mechanism is coupled to front end of drawbar
MUST specify door width and position of hoist (left or right)

SLT-TT

Rolling Steel Thermotite Slat Foam Injected

SLT17-22P

Rolling Steel 2" Flat Slat 22-ga Primed

RN0029-SS

Roller 2" White Nylon 9" Stainless Steel Stem Double Sealed Bearing

A supreme double sealed bearing roller that never requires lubrication
Ideal for high usage and high moisture areas ie..carwash
7/16" stainless steel shaft.
200 lb load 50000 cycles

Q300

LiftMaster Traveler Carriage for Miracle-One**Discontinued

Replacement traveler carriage for Liftmaster Elite Miracle-1 model
Same as part no. K75-50341

MR00007

Micanan Brake Disconnect Cable 1/16" x 12"L c/w Cable Stop

2 Required per operator

SPR41B12X1

Sprocket 41B12 1" Shaft 1/4" keyway 2SS 5/16"

15-48B10GXX

Sprocket 48B10T 0.750B

T101L5

LiftMaster 1 HP 115/230V 1P Commercial Trolley Operator Logic 5 ***No Longer Available

Trolley low profile with brake
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

Installation Manual Manuel d'Installation Sell sheet Brochure

36254R

Genie T-Rail Carriage Assembly

This part is listed under several part numbers: 36254R.S 36197A 21784R 20438R
For all chain drive openers with steel T-rail assemblies
Must be installed with inner slide part # 25605R

LA500HDTKITSTD

LiftMaster Torroid Transformer Kit

Powers gate from AC power-120V or 220V single phase.
Ideal for applications that prefer AC transformer run operator vs. battery run operator
Ideal for areas that experience temperatures below -4 F for extended periods

19-5114

LiftMaster Trolley Chain Pack #41 for 14ft Door

For 3/4 & 1 HP trolley operators

7001-8-BLACK

Commercial Side & Top Weather-Strip 8' Long - Black (Code B)

Black galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

775

Fasteners Hex Head Bolt 1/4-20 x 3/4" 1000/Box

1/4" bolt has 7/16" head
Max torque = 6
Full thread

CBS-338

Center Bearing Support 3-3/8" 8-gauge with Bearing Sold per Piece

Heavier gauge allows for use in both 2" commercial or 3" industrial applications
Sold per piece
For 1" shaft
Double clipped ends

MT22-BLACK-RH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Installation Manual Worksheet Sell Sheet

K2A761

LiftMaster Coaxial Cable

For use with 315MHz receiver

41B4103

LiftMaster Service Belt Tensioner

MA021

LiftMaster Nylon Arm Nuts 50/Pkg

For barrier gate models MADCBB MATDCBB MASDCBB & MASTDCBB

MB-01001

Micanan Electric Motor Only 1/2HP 110/220V 1PH

Base Mount motor O.D.P. FR56
Used on Micanan's T TB APT J EJ H EHJ HHD & SD

CONSD24V

Reversing Contactor Struthers Dunn 24V

Struthers-Dunn # A275KXX90

K72-19974

LiftMaster Output Shaft Kit

Kit includes: Output shaft sprocket assembly dual sprocket 32/14 sprocket 48B18x1 sprocket 50B12x1 ring washer key set screw roll pin and thin walled receivers

Installation Manual

27-20100

Truck Door T-Style Spring Assembly 60" Long

Wire thickness: .24"
Inside diameter: 1.75"
Includes bolt plug and winding plug wound onto spring for stronger design
Cross reference: T#51042 W#2701

UCFL-1

Self-Aligning Cast Flange Bearing Football Style 1" Bore UCFL205-16

Grey cast iron painted.
Comes with 2x set-screws
Football style 2 bolt

28-32085

Truck Door 2" Vertical Track with Holes 95.00" Long for Whiting Roll-Up Doors *** To extent of inventory

Galvanized steel 14-gauge construction
Tabbed at both ends for proper alignment at track joints and to allow universal fit for both left hand and right hand frame sides.
Holes drilled to allow for faster plug weld installation to frame
For use with 2" diameter steel or nylon rollers

CB18A0500

Cable 1/8" 7x7 500' Galvanized

Galvanized cable 1/8" 7x7 500ft spool.

Comparison charts

STATION081

Manaras Push Button Control Station 1-Button Nema 4/12

1-button 1 N/O contact
Plastic

WKP250LM3

LiftMaster Wireless Keypad 250-Code ** Replaced by KPW250

Wireless access control keypad
250 code capacity - 4-digit codes
Wireless control of up to 4 doors or gates with additional GCUs
Post or surface mount standard
900MHz
Compatible with GCU and LiftMaster® 315MHz rolling code receivers

.......more details

Programming Instructions

CPS-3

LiftMaster Option Card with CPS-L Eyes

For applications requiring two sets of photoeyes ( CPS-III)

Installation Manual

K74-G0589

LiftMaster Hall Effect Sensor

For SL595 gate operator

655202

LiftMaster Pneumatic 14' Sensing Edge with 2-Wire Take-Up Reel

EXTANT

LiftMaster Coax Antenna Connection Kit JF

For use on Medium-Duty commercial operators only

Installation manual Manuel d'installation

MK-00060

Micanan Timer Plug-In Type 0-10min 24V 8-Pin (MK00481)

Programming Instructions Adding a timer

975LMC

LiftMaster Laser Parking Assist ** To extent of inventory

Works with Chamberlain (LiftMaster) Garage Door Openers
Easily connects with two wires to the photocell terminals of the opener
The Laser light turns on as you drive into the garage
Simply Adjust the light to a specific spot on the dash

Installation Manual Manuel d'Installation

.225-2-R

Cut-to-Length Torsion Spring .225 x 2" Right Hand Wound Orange/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

HD-15

Reflector Hood for 3" Round Reflector

Black/Charcoal

45DCT

LiftMaster Circuit Board

Board: Tri-band Security+ 2.0
DC Chain/ Belt Drive model
Fits: 8360 8550
Also known as; 45DCBR1A 041D7356 1D7356 41DCBC1A 41DCBC3A 41DCCC2A 41DCBC5A 45DCCL5A 45DCCL3A 45DCCL1A 45DCCR5A 41D7356 45DCCR3A 45DCCR1A 001D7356 41DCCC1A 41DCCC3A 45DCJL5A 45DCRL1A 41DCCC5A 45DCRL3A 45DCJL1A 45DCJL3A 45DCBL5A 45DCBL3A 45DCBL1A 45DCBR5A 45DCRL 45DCBR3A 47DCCR1 1D8363 045DCT 45DCBL1 45DCBL2 45DCBL3 45DCBL4 45DCBL5 45DCCL1 45DCCL2 45DCCL3 45DCCL4 45DCCL5 45DCBR1 45DCBR2 45DCBR3 45DCBR4 45DCBR5 45DCCR1 45DCCR2 45DCCR3 45DCCR4 45DCCR5

378LMC

LiftMaster Wireless Control Panel ***To Extent of Inventory

Wireless control panel for 315 MHz openers
For use as a secondary wall control panel only
Mounting hardware and batteries included (CR2032)
Auxiliary button to open/close 2nd garage door
Tested and it will work with MH5011

Programming Instructions Instructions de programmation

.243_1-3/4"-LH

Torsion Spring .243 x 1-3/4" x 12ft LH White/Yellow

Wire size: .243
Inside diameter: 1-3/4"
Length: 12 ft

LSBLK

Loop Sealant Cartridge Black 29oz

Also available in grey (LSGRY)
Can be installed in sub-zero temperatures as long as the surface is clean and dry
Loop sealant gun sold separatley # LSGUN

24-24-2

LiftMaster Relay 24VAC 8-Pin DPDT

4A1344

LiftMaster Light Socket Plastic (41C279)

41A4916

Gel Wire Connectors 19 to 26 AWG 100/ box

T-833-C

FL-Allstar 3-btn 9-Door Transmitter 109023-311 MHz***NLA

This nine channel transmitter controls up to nine doors (open-close) or three doors (open-close-stop).
It has a height switches encoder with three positions: + 0 and - .
Manufacturer's model number: 8833TC (190-109023)
Dimensions: 4 5/8" x 2 1/4" x 7/8"

Programming Instructions

CAM004

Manaras Limit Cam

Limit cam for Mountshaft009A 018C 018D
2 cam's required per shaft

17300

Doorlec DC-3000T3 3-btn Transmitter 313 MHz

One block of 10 dip-switches for programming
Will activate 3 Doorlec 17307 receivers (DC-3000R)
Includes visor clip and 9V battery

Programming Instructions

SEL2641R433-Z4

Erone 4-Relay Stand Alone Receiver 433MHz

Up to 85 transmitter keys
2 NO relay + 2 NO/NC relay (24VA)
Self-learning memorization
Standard pulse output Relay number 4 can be setup to latched output
Can be used for O/S/C
Power requirements: 12/24Vac/dc

.......more details

Sell Sheet Brochure Wireless System Chart

VBELT_5L350

Manaras VBelt 5L 35" - repl. by B32

Used on MTH MTBH MSL models
Type B
Inside length 32 inches

LIMIT021

Manaras Single Limit Switch with Flat Lever

Single limit switch (SPDT) used to stop the door at top and bottom or as disconnect switch
Unimax
Snap-action

Limit Switch Chart

9931MT

Allstar 1-btn Mini Transmitter 109391 318 MHz *** No Longer Available

Open/Close mini remote for 1 door
Compatible with Allstar and MVP receivers
Tab for key ring
Power: 12-volt battery
Codes: 19683 (set by nine trinary dipswitches)
RF frequency: 318 MHz

.......more details

Programming Instructions

9931T

Allstar 1-btn Transmitter 108787 318 MHz ***Replaced by P-9931T

Compatible with Allstar and MVP receivers
Visor mounting clip supplied
Power: 9-volt battery
Codes: 19683 (set by nine trinary dip switches)
RF frequency: 318 MHz
Dimensions: 2.25" W x 4.625" H x 1" D Order number: 190-108787

.......more details

Programming Instructions

MGR

Linear 1-Channel MegaCode Gate Receiver 318 MHz (DNR00104)

��Single Form ”A” (normally open) relay rated at 30 Volts AC/DC up to 5 Amps
Supplied with whip antenna three feet of coaxial cable and bulkhead connector
Memory: storage for up to 40 MegaCode transmitters
Power: 12 - 30 VAC or 10.5 - 30 VDC
Codes: 1000000+ (MegaCode format)
RF frequency: 318 MHz

.......more details

Installation Manual

HAE00048

Linear Helical Gear with Grease *** Discontinued

Includes roll pins
Can be used on all Linear / Westinghouse residential operators.
Helical gear measures 2-7/8" diameter

138BL

1-3/8" Light Brush Insert 6ft Long

Polypropylene bristles
Same as model MS1702

4005-16FT

Aluminum Retainer only for Heavy Brush 16' Long 180 degree

For angle application (180 degree)
For use with Heavy Brush

4001-12FT

Aluminum Retainer only for Light Brush 12' Long 45 degree

For angle application (45 degree)
For use with Light Brush or Vinyl Insert.

1003-4"-200FT

Bottom U-Rubber 4" Black 200' Long

200ft spool of vinyl insert.

1006-1-1/2-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

Black with flexible fin to touch door face.
For door thickness 1-1/2"

1104-18FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 18' Long - Black (B)

Black rigid vinyl retainer with black flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Full case quantity only (12).

25-42-220

Extension Spring 7' Door - 220 lbs Green w/ clip

Double - Loop
25" long 42" stretch 220 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

25-42-170

Extension Spring 7' Door - 170 lbs Orange

Double - Loop
25" long 42" stretch 170 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

91-00400

Truck Door Step Bolt 1/4"-20 x 1.25" (3/4" head)- Sold Per Piece

Zinc plated finish
Cross Reference: T #80015-1610 120250

27-20301

Truck Door Cable Drum Curbside (RH) for Todco Roll-Up Doors

Cast aluminum construction
Large die cast cable drums are grooved to prevent cables from binding or wearing prematurely.
Angle of cable slot determines left or right drum.
Holds up to 130" door cable
Cross Reference: T #59033-1 T #59129-1 W #4013 330100

HD3076

Lift Handle Roll Grip Round Zinc Plated 5-1/2"-5-3/4"

Measures 7" from end to end
Measures 5.5" from eyelet to eyelet

R5999

Shaft Collar 1" with 1 Set Screw

Set Screw: 5/16 x 18

25-10100

Truck Door 1" Steel Roller 2.5" Shaft Length for Todco Roll-Up Doors

Zinc plated Hardened shaft and raceways
Seven roller ball design
Cross Reference: T #61174 T #69162 W #4026 W #4027 291000
Box quantity: 25

12-1008

PVC Strip 12" x .120" Standard for Replacement Strip Curtain Sold per Foot

Suitable for most average applications.
Temperature Range: -20°F to 150°F (-28° C to 66° C).
Formulated with ingredients that meet USDA requirements for incidental food contact.

WHITING-ALUMCLAD

Whiting Special Order Aluminum Clad Roll Up Door Price by Quote Only

Special order to customer's specs
A prepainted aluminum facing added to plywood core dry freight door
Premium grade 7 ply 3/4” panels manufactured with a medium density overlay (MDO) laminated to smooth hardwood outer veneers of Transportation Core plywood all designed for optimum strength and appearance.
2" track and rollers for durability.
Tongue and groove joint.
2 cable balancer with independent spring for each cable. Springs treated with rust preventative.

.......more details

R5115

Bearing 1" Commercial with Flanged Retainer Football Style

1" Commercial bearing pressed in a Flanged Retainer Football Style
Type: Steel Bore: 1"
Inner Race Offest: 13/64"
Rated Load Cycles: 250 lb @ 10000 cycles (8')

7220355

FAAC 400 Front Fitting

1006-2-10'

Rigid Vinyl Bottom Retainer U-Shaped 10' Long

Black with flexible fin to touch door face.
For door thickness 2"

SPRAY-523

Aluminum Touch Up Spray Paint 350g Slate / Charbon #523

350g

25-01431

Truck Door Stainless Cables 105" 5/16 eye 7x19 Pair for Roll-Up Doors

Works with both Whiting and Todco doors
Cable size: 1/8 "

25-4002-5K

LiftMaster 1.6-2.5 Amp Overload Fuse

For models: SL585-100-53 SL595-100-53 SL575-100-53

TS-1-168-GALV-KEY

Tube Shaft 1" x 168 (14'.0) Galv w/KW 1/4" x 3/8"

When ordering order one foot longer that actual door width
Comes with 3 keys 1/4-3/8-3'' long

2235.296

Whiting Coldsaver Bottom Panel 14-1/2" x xxx" with lock seal and retainer (Max 96")

Fits Coldsaver Roll-Up Doors
1-1/8" thick max 96" wide
Includes Lock and keeper

FAAC-844-115V

FAAC 844 Slide Gate Operator 115V

The FAAC Model 844 automated system for sliding gates is an electro-mechanical operator transmitting motion to the sliding leaf via a rack or chain pinion appropriately coupled to the gate
The non-reversing system ensures the gate is mechanically locked when the motor is not operating and therefore no lock needs to be installed
Control Board: model 780D

1-0242

RW Stay Roller 68 Nylon 2-1/2" Dia

Special Order item
Reverible and adjustable for doors 1-1/2" to 3" thick
Steel frame Zinc plated finish

Specification Catalogue

8369

Whiting Curbside Latch Assy - Fan Type Side Locks

Curbside Latch with Offset Base
Replacement latch for a Whiting Premium Roll Up Door

OSH-6813-M-N1-LH

Manaras Opera-SH 3/4 HP 208V 1 Ph Monitored ECB w/N1 Photoeyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

MGH-6237-M-N1-RH

Manaras 3 HP 208V 3P Jackshaft Monitored w/N1 Eyes Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

Specification Sheet Drawing Diagram

OGH-6433-M-N1-RH

Manaras 3/4 HP 480V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Right Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

XBA14

NICE Aluminum Bar with 4M White Paint 69mm x 92mm x 4150mm

K41-0118-000

LiftMaster HD Gate Idler Pulley Replacement Kit for HDSL24UL

ncludes: (2) Idler Pulley's

2GW-L

Rolling Steel 2" Stamped Alternate Windlock Left Hand

PDC-300-075-1-40/63-20

Pulse 300 Direct Drive Opener 3/4 HP 1" shaft 110/240V 1ph 40:1 20' Cable

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

.......more details

PRO-TBW-7523-U

Micanan 3/4HP 230V 3P Trolley Operator with Brake and Carwash Mod N4 Eyes

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

028-201

Blue Giant Photoswitch 10-30VDC 50CM Range 5M Cable SMP8500/5PG5 **Special Order

Light Source: Infrared (880 nm)
Control Feature: Sensitivity pot. and light/dark switch
Output Status: N.C/N.O
Housing: M18 x 1

TDC48-14

LiftMaster Trolley Chain Pack #48 700LBS 14ft Door

Chain pack only
TDC48-14 is a #48 Chain Pack Kit for 14 Ft. Trolley Rail Assemblies.
For use with LiftMaster® MAXUM TDC 700 Series Standard-Duty Trolley Commercial Door Operators; installed on 14' commercial doors.

Z9961

Maxum Operator Mounting Bracket 700-1200lb Ops

Compatible with MAXUM® Jackshaft operators
Eliminates the need for a spreader arm by mounting a fixed bearing on the operator adjustment plate preventing the torsion shaft and operator from moving closer together
Precise chain tension adjustments through the adjustment bolt
Maintains parallel alignment between the operator output shaft and the door’s torsion shaft during chain tensioning
Operator installation is made easier by allowing the bracket to be hung on the torsion shaft via the bearing supporting its weight during fastener installation thereby removing the need to hold the operator manually
Has physical tick marks on both sides of the bracket and at the center of the bearing plate to indicate the torsion shaft’s center position allowing bracket to be accurately mounted prior torsion shaft installation

.......more details

Installation Manual

GRX-40X13-134-WTE

Thermal Window Clear 40" x 13" for 1-3/4" Garex Door White Frame