Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Long Range
50018

Doorlec Photo Switch Polarized Explosion Proof Reflective w/Round Reflector

  • Class 1 Div 1 Groupes CDEFG explosion proof Certified CSA
OSH-6434-M-N1-RH

Manaras Opera-SH 1 HP 480V 3 Ph Monitored Board w/N1 Eyes RH

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
PRO-GH-10023U-R

Micanan 1 HP 230V 3P Gearhead Op. N1 Eyes Monitored ECB Right Hand

  • Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
  • Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
  • External radio control terminal strip
  • Three button O/C/S control station Nema-1
  • Supplied with Nema-1 photocells
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
K77-38121

LiftMaster Wiring Harness SL585U SL595U

  • Compatible with LiftMaster® Models SL585U and SL595U Slide Gate Operators
31111-114

Doorlec Sprocket 50B70 1-14" Bore KW/SS

OPH-6532-M-N1-LH

Manaras Opera-H 1/2HP 600V 3Ph Monitored ECB and N1 Photoeyes Left Hand

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
RSH-6814-MON-LH

Manaras Rapido Jackshaft Operator 1 HP 208V 1PH W/ Elect. Board N4X Thru Beam Eyes LH

  • High speed heavy-duty v-belt drive industrial operator.
  • Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
  • Two times the speed of the standard jackshaft operator
  • Manages soft-starts and soft-stops
  • Can be wall or shelf mounted on either side of the door
  • Cast iron pillow block bearings
    • .......more details
OPH-6214-M-N1-RH

Manaras Opera-H 1 HP 240V 1Ph with Monitored Board and N1 Photoeyes

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
2705.177_13.5

Whiting Curbside Torsion Spring 2-3/16" ID 13-1/2" Long

  • Torsion spring wire only
  • .177 wire size
ZAP-8800-3-PB

Zap Control Box Assembly for ZAP8800

GALV-295-258-L

Cut-to-Length Torsion Spring .295 x 2-5/8" Left Hand Wound Galvanized Blue Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-295-258-R

Cut-to-Length Torsion Spring .295 x 2-5/8" Right Hand Wound Galvanized Blue Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
19-5010-SS

Roller Chain #50 Stainless Steel w/Connecting Link 10ft Length

OSH-6214-M-N1-LH

Manaras Opera-SH 1 HP 240V 1 Ph Monitored w/N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
OSH-6214-M-N1-RH

Manaras Opera-SH 1 HP 240V 1 Ph Monitored w/N1 Eyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
MOUNTSHAFT013

Manaras Hoist Shaft Kit for GH GHW/C/X MGH MGHW/C/X

  • 5/8D15LG
JHDC12X1BMC

LiftMaster MAXUM Jackshaft 3/4HP 120/240V 1PH DC Operator 60 Cycles/Hour 1200LB

  • New DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
  • Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
  • Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
  • Listed to ANSI/CAN/UL325 Standard for USA/Canada
  • Drive Type 65:1 Gearbox with #50 Chain Output
  • Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls
    • .......more details
JHDC_Installation-manualJHDC_Manuel-installationData sheetFiche techniqueQuick connect guideGuide de connexion rapideOrdering guideSprocket recommendation
TDC7-16

Liftmaster Comm. 16FT Trolley Angle set (10-5816-P x 2) and #48 chain pack (TDC48-16) ***Actual length 227"***

  • Double Angle Rails for doors up to 16'6" high
  • Includes #48 chain pack
6200-2-7-SEALED

Roller 6200 Sealed Bearing 2" White Nylon 5.96" Long Stem

  • 2" diameter white nylon tire
  • 6200 sealed precision bearing
  • Zinc plated 7.04" Overall Length 5.96" stem
  • Rating: 100lb; 100000 cycles of a 12′ door
400-CBAC-EG-115V

FAAC 1042011277 Long (EG) Gate Arm w/Positive Stops 50-1/2" L *** Price by Quote Only

  • 400 CBAC EG Long Arm with positive stops
  • For hydraulic Swing Gate Operator
  • This arm is meant to be used to transform a kit into a master/slave or bi-parting system or as a replacement operator for an existing FAAC system
SHAFT028

Manaras FDGHE Cam Shaft 5/8"-18

GALV-295-6-144-L

Torsion Spring .295 x 6" x 12ft LH Galvanized Blue

  • Wire size: .295
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-250-2-L

Cut-to-Length Torsion Spring .250 x 2" Left Hand Wound Galvanized Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
CGH205L5-LH

LiftMaster Gearhead with Brake & Carwash Mod. 2 HP 575V 3P L5 Left Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
GALV-331-334-144-R

Torsion Spring .331 x 3-3/4" x 12ft RH Galvanized Red/White

  • Wire size: .331
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized
GALV-319-334-144-R

Torsion Spring .319 x 3-3/4" x 12ft RH Galvanized Blue/Green

  • Wire size: .319
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized
GALV-312-258-144-R

Torsion Spring .312 x 2-5/8" x 12ft RH Galvanized Yellow

  • Wire size: .312
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized
GALV-295-258-144-R

Torsion Spring .295 x 2-5/8" x 12ft RH Galvanized Blue

  • Wire size: .295
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-283-334-144-R

Torsion Spring .283 x 3-3/4" x 12ft RH Galvanized White

  • Wire size: .283
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-283-258-144-R

Torsion Spring .283 x 2-5/8" x 12ft RH Galvanized White

  • Wire size: .283
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-283-334-144-L

Torsion Spring .283 x 3-3/4" x 12ft LH Galvanized White

  • Wire size: .283
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-250-334-144-R

Torsion Spring .250 x 3-3/4" x 12ft RH Galvanized Green

  • Wire size: .250
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-250-258-144-R

Torsion Spring .250 x 2-5/8" x 12ft RH Galvanized Green

  • Wire size: .250
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-250-334-144-L

Torsion Spring .250 x 3-3/4" x 12ft LH Galvanized Green

  • Wire size: .250
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-243-334-144-L

Torsion Spring .243 x 3-3/4" x 12ft LH Galvanized White/Yellow

  • Wire size: .243
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-243-258-144-R

Torsion Spring .243 x 2-5/8" x 12ft RH Galvanized White/Yellow

  • Wire size: .243
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
PUSH180

Manaras Contact Block NO XB4/XB5

11.6135

Whiting Horizontal Track 2" x 135" L 6" Radius Curbside 1 Piece

  • 1 curbside horizontal track
MGH-6536-M-N1-LH

Manaras 2 HP 208V 3P Jackshaft Monitored w/N1 Eyes Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MGH-6536-M-N1-RH

Manaras 2 HP 600V 3P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
K41-0156-000

LiftMaster Cable Tension Monitor Left Side

  • For use with various LiftMaster® MAXUM Series DC 700 lbs. to 2200 lbs. Standard-Duty and Extended-Duty Jackshaft Jackshaft Hoist and Trolley Commercial Door Operators
  • This service kit is compatible with the following MAXUM models: JDC JHDC and TDC.
  • NOTE: Refer to K41-0157-000 for Right-Side Cable Tension Monitor
XF208VAC7

LiftMaster 208V Transformer Kit 700

BEA-10LIGHT-TG

BEA Modular LED Signal Light Segment Green

  • Signal lights for industrial and vehicle flow management applications.
  • LED signal modular lights offer customizable configurations with “build-your-own” lighting elements that share a common base and bracket.
  • These LED signal units are available in red green yellow and an audible alarm cap and can be stacked in a tower configuration with up to six modules.
  • Operating temperature: -40 to 122F
  • Nema 4/IP65
  • Base sold separately
    • .......more details
User GuideDatasheet
MAGCRD-25

Linear Magnetic Striped Cards Sold in Pkg 25 *** To Extent of Inventory

  • Magnetic striped cards
  • Track II encoded
  • Low-CO magnetic stripe
  • Sold in lots of 25
  • Same as: 0-200025
59206

Todco Operator Bearing Shallow Header Roll Up Door

2200-540

Linear Replacement Key for BG Snap Lock

2100-1650

Linear Plate with Solid Pin V Groove

2200-274

Linear Pillow Block Bearing 1"

MB-02104

Micanan Electric Motor Only 3/4HP 230/460V 3PH TEFC

  • C-Flange motor fits: GT GH GHC GSD
768-500

Fasteners Lag Screw Full Thread Hex Washer Regular Profile 5/16" x 3" 500/Pail

  • 7/16" head
  • Hex Washer Regular Profile Head
ME120-Y-4E-P/FT

Miller Edge Sensing Edge Yellow 4-Wire Monitored End Outlet Sold per Foot

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
PROBE-200

EMX CARSENSE-101 Direct Burial Probe with 200' Lead Wire

  • Wand only
  • Requires CS101 (Carsense-101)
SHAFT064

Manaras Limit Shaft 5/8"-24x12.5

MA024-10RDOT

LiftMaster Articulating Aluminum Arm 10ft x 3in w/Reflective DOT Tape (Hardware Kit NOT Included)

  • For use on Mega-Arm gate operator
  • Hardware kit MA033 NOT included
  • Red & White Retro-Reflectorized DOT Tape
DC2000

LiftMaster Controller DC2000

  • DC2000 Controller with battery backup
  • BackUp Commercial Vehicular Gate Operator
  • 12VDC - 30 Amps Max.
  • 125 lbs. Max. pull @ CSW-200 Units
  • 105 lbs. Max. pull @ SL-3000 Units
P-8833T-OCS

Pulsar 3-btn 1-Door O/C/S Transmitter 109372-Compatible 318 MHz

  • Open/Close/Stop remote for 1 door
  • Compatible with 3-channel Allstar and MVP receivers
  • Portable transmitter
  • Easy access to battery and coding switch
  • Power: 9-volt battery
  • Codes: 6561 (set by eight trinary dip switches)
    • .......more details
9003-200-17-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle 2" Track Bolt On 17' Long - Black

  • Black rigid vinyl retainer with black flexible vinyl insert.
  • Reverse angle bolt-on vinyl retainer.
  • Bolts onto reverse angle steel jamb.
Drawing
9003-200-13-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle 2" Track Bolt On 13' Long - Black

  • Black rigid vinyl retainer with black flexible vinyl insert.
  • Reverse angle bolt-on vinyl retainer.
  • Bolts onto reverse angle steel jamb.
Drawing
9003-200-9-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle 2" Track Bolt On 9' Long - Black

  • Black rigid vinyl retainer with black flexible vinyl insert.
  • Reverse angle bolt-on vinyl retainer.
  • Bolts onto reverse angle steel jamb.
Drawing
MPB-3

Doorlec Open Mushroom Stop Lockable Close Push Button Station

  • Green (Open) Red (Mushroom Stop) Black (Close) push-button station
19-50106MN

Chain # 50x106 (5-1/2') with Master Link Nickel Plated

  • Also known as: K19-50106MN 199023NP
  • Complete kit includes: #50x106 Chain master link and clip.
GH-353-3

Doorlec Industrial Gearhead Door Operator 3HP 575V 3-Phase

  • Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
  • DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Worm gear reducer 40:1 ratio for high-torque and long life
  • Solenoid Disk Brake Prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Optional Friction Clutch available
    • .......more details
CGH755L5-LH

LiftMaster Gearhead with Brake and Carwash Mod 3/4HP 575V 3P L5 Left Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
29120

Doorlec Transformer 120V pr 28 V. sec. 50VA

  • 120V primary 28 V secondary 50VA
GEAR001

Manaras Bevel Gear GH/MGH 5/8" 20 Tooth

26141

Doorlec Cam Shaft 9-1/4" x 5/8" (24 x 1.59cm)

  • Fits the older smaller boxes
SPR50B42X1

Sprocket 50B42 1" shaft 1/4" KW

  • 42 tooth sprocket for #50 chain
TSTL

EMX Test Loop

  • Electrical diagnostic tool for loop and vehicle detectors
  • Two-wire: red and black
  • Dimensions: 1.25 inches (H) x 1.25inches (W) x .75inches (D)
  • Compatible with most brands of loop detectors
SRDRKP

LiftMaster Keypad Smart Reader

  • LiftMaster Smart Readers offer a contemporary appearance and leading-edge feature set to add access control to any door or entrance in your building or community including mobile credentials capabilities.
  • Standard technologies include Proximity (125 KHz) Smart (1356 MHz) and Bluetooth so that customers can migrate to newer secure credentials.
  • BLE communication enables myQ Mobile Credentials within the myQ Community app and ecosystem.
  • OSDP Auto-Connect feature to switch from Wiegand to OSDP when connected to the OSDP port on the CAPXLV2.
  • Accelerometer - based tamper detection
  • Tri-State LED light bar for user feedback
    • .......more details
CCTD-04

Fuse 600VAC/300VDC Class CC Time Delay 4AMP Sold per Fuse

  • Sold per fuse
510.1010.00

Whiting Custom Color Premium Topcoat Paint Option

  • Option for Dry Freight Doors
Q277

LiftMaster Wiring Harness Kit DC2000 K94-50262****no longer available

  • Compatible with LiftMaster® Models SL3000 and CSW200 Perimeter Access Systems
SPR410B12X1

Sprocket 410B12 x K1/4 2S 5/16-18 PH1/4

65-5501-12

LiftMaster Bi-Parting Mod Kit 12ft (Includes 19-5118 Chain #41 for 18ft Door and 10-5816-P Track for 16ft Door

  • Includes: 65-5501 Bi-Parting 19-5118 Chain #41 for 18ft Door 10-5816-P Track for 16ft Door
LB710-14

Laminated Bumper Standard Black 10" x 14" 7" Projection Horizontal Installation ** Special Order

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
MOD024D

Manaras Nema 4 3 Phase Control Panel w/ECB ** Modification to Operator Only

  • Price by quote only
GALV-375-6-144-LH

Torsion Spring .375 x 6" x 12ft LH Galvanized Yellow/Green

  • Wire size: .375
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized
GALV-225-258-144-L

Torsion Spring .225 x 2-5/8" x 12ft LH Galvanized Orange/Green

  • Wire size: .225
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized
GALV-273-258-144-L

Torsion Spring .273 x 2-5/8" x 12ft LH Galvanized Orange/Red

  • Wire size: .273
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-363-334-144-R

Torsion Spring .363 x 3-3/4" x 12ft RH Galvanized Green/White

  • Wire size: .363
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-295-334-144-L

Torsion Spring .295 x 3-3/4" x 12ft LH Galvanized Blue

  • Wire size: .295
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-295-334-144-R

Torsion Spring .295 x 3-3/4" x 12ft RH Galvanized Blue

  • Wire size: .295
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-262-258-144-R

Torsion Spring .262 x 2-5/8" x 12ft RH Galvanized Red/Yellow

  • Wire size: .262
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-273-258-R

Cut-to-Length Torsion Spring .273 x 2-5/8" Right Hand Wound Galvanized Orange/Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-273-258-L

Cut-to-Length Torsion Spring .273 x 2-5/8" Left Hand Wound Galvanized Orange/Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-363-334-L

Cut-to-Length Torsion Spring .363 x 3-3/4" Left Hand Wound Galvanized Green/White Price per Inch

  • Priced per inch - cones sold separately
  • For factory installed cones use part no. C-375-INSTALLED
GALV-295-334-L

Cut-to-Length Torsion Spring .295 x 3-3/4" Left Hand Wound Galvanized Blue Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
GALV-243-2-R

Cut-to-Length Torsion Spring .243 x 2" Right Hand Wound Galvanized White/Yellow Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
GALV-243-2-L

Cut-to-Length Torsion Spring .243 x 2" Left Hand Wound Galvanized White/Yellow Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
GALV-207-2-L

Cut-to-Length Torsion Spring .207 x 2" Left Hand Wound Galvanized Brown Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
GALV-207-2-R

Cut-to-Length Torsion Spring .207 x 2" Right Hand Wound Galvanized Brown Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
GEAR014

Manaras Disconnect Bevel Gear 5/8" 20 Tooth OGH

MA033

LiftMaster Hardware Kit Only for Articulating Arm ** Arm Not Included

  • Hardware kit for articulating arm models MA024 and MA034
  • Articulating arm hardware kit
  • Arm sold separately
TRACK003

Manaras 1 Piece Galv Track 2x2x12'6 ** 1 pc Only

  • 2 pices are required to make 1 set of tracks
  • Does NOT include the chain
OGH-6534-M-N1-RH

Manaras 1 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Right Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
1326-134-BLK-PLEXI

Elton Commercial Window 1-3/4" thick 1326 Black Frame Sealed Plexi Glass

  • Screw together window kit
  • Frame size: 26-1/8" x 13-9/16" (Tip to Tip)
  • Cut-out size: 25-1/16" x 12-9/16"
  • Vision area: 23-7/16" x 10-13/16" Corner Cut 4" Radius
  • Different glass options and frame colours are available upon request
RS36203

Roller 3" Steel Roller Head Only Heavy-Duty 6203 Bearing 5/8"

  • Steel Roller Wheel diameter: 3"-C 6203 bearing
  • Roller Head Only
FM145

Nortek Mighty Mule Pedestrian Gate Lock Bulldog

  • Bulldog Pedestrian Gate Lock secures walk-through gates in a locked position.
  • The Bulldog lock is mounted horizontally and it locks the swinging pedestrian gate to a post or column
R6000

Shaft Collar 1" with 2 Set Screws

  • Set Screws: 5/16 x 18
FAAC-SPEC-ORDER

FAAC Special Order Gate Product Price by Quote Only

  • Ordered to customer's specs