Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Long Range
PRO-H-5021-U-LH

Micanan 1/2HP 230V 1P Hoist Operator N1 Eyes Monitored ECB Left Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake OPTIONAL
  • On-Board receiver holds up to 20 transmitters
PRO-J-10023-U-RH

Micanan 1HP 230V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Pro J Manual Specification Sheet
TRACK-SET-2STD-7

2" Tracks Set 7'-0" Torsion 1-3/4" Door Clips for Wood Frame 12" Radius *** By quote only

MM-00366

Micanan Circuit Board N-4 Support U-Bracket

MG-00082

Micanan Plastic Spacer for Boards (Long Length 1.190)

MK-00680

Micanan Plastic Nut for Antenna Connector

MK-00054

Micanan Overload Reset 3-Phase 12.0 - 16.0 Amps

MK-00696

Micanan 4-Pole Terminal Strip

MK-00048

Micanan Overload Reset 3-Phase 1.2 - 1.8 Amps

MK-00225

Micanan Transformer 110V-24V-100VA

MK-00228

Micanan Transformer 230V-24V-50VA

MK-01155

Micanan Transformer 460V-24V-50VA

MV-00019

Micanan Pull Cord SPST Lever Type - Nema 4

MV-00220

Micanan Pull Cord DPST Swivel Type - Nema 4

MV-00022

Micanan Pull Cord SPST Nema 7/9

MV-00017

Micanan Key Switch O/C/S Btn Tamper Proof Nema 1 Flush Mount

MK-00785

Micanan 3-btn O/C/S Nema-7/9 Pushbutton Control Station

  • Surface mount
  • Killark
PRO-H-5083U-RH

Micanan 1/2HP 208V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake OPTIONAL
  • On-Board receiver holds up to 20 transmitters
HAML-MOUNTING-BRKT

GDI Side Mounting Bracket N/C When Ordered w/Operator

.283-6-L

Cut-to-Length Torsion Spring .283 x 6" Left Hand Wound White

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-600-INSTALLED
.375-334-L

Cut-to-Length Torsion Spring .375 x3-3/4" Left Hand Wound Yellow/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
2X4PO50

Devanco Loop 2' x 4' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
ME117-2W-BLK-U

Miller Edge 2-Wire Black Universal Outlet Sold by the Foot

  • Electromechanical slide in edge for 1" to 2" sectional doors.
  • Touch sensitive signaling allows for immediate stopping or reversing of motion. The ME117 is resistant to water flame and most common greases and oils.
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Installation manualSell sheet
PRO-J-7581-U-LH

Micanan 3/4HP 208V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Specification Sheet
PRO-LJ-5021-U

Micanan 1/2HP 230V 1P Jackshaft N1 Eyes Monitored ECB Universal Mount

  • On-Board receiver holds up to 20 transmitters
PRO-LJ-5021-U-RH

Micanan 1/2HP 230V 1P Jackshaft N1 Eyes Monitored ECB Right Hand

  • On-Board receiver holds up to 20 transmitters
PRO-GT-15083-U

Micanan 1-1/2HP 208V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

  • On-Board receiver holds up to 20 transmitters
PRO-GT-5023-U

Micanan 1/2HP 230V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

  • On-Board receiver holds up to 20 transmitters
PRO-GT-5011-U

Micanan 1/2HP 115V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

  • On-Board receiver holds up to 20 transmitters
K29-FDCL-500CCB

LiftMaster FDCL Receiver Logic Board with Battery Rev 500

  • Replacement kit charging circuit board firmware and battery for FDCL
.273-258-R

Cut-to-Length Torsion Spring .273 x 2-5/8" Right Hand Wound Orange/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
PRO-APTB-5043-U

Micanan 1/2HP 460V 3P Apartment Trolley Operator With Brake N1 Eyes Monitored ECB

  • Low clearance design for APT applications (9.5")
  • Door speed: 12" per second
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-TB-10021-U

Micanan 1 HP 230V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 & 1 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-TB-5021-U

Micanan 1/2HP 230V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-T-5025-U

Micanan 1/2HP 220V 1P Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
CBI-29

Wheel Chock CBI-29 Cast Ductile Iron

  • Made from Cast Ductile Iron for Impressive Strength
  • Painted Blue for good Visibility
  • Completely Reversible for Simple Use
  • Size: 8" wide x 12" long x 9" high
60-7248-CC07

Wheel Chock Safety Pkg incl'd: cast alum. alloy chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

  • System Includes (1) CC-07 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
  • Reversible Chock Design
  • One-Piece Cast Construction
  • Cast Aluminum Alloy
  • Size: 10" Base x 9" high x 6-1/4" wide
CBI-087

Wheel Chock CBI-087 Cast Ductile Iron

  • Cast Ductile Iron for Impressive Strength
  • Painted Yellow for High Visibility
  • Size: 8-1/4" wide x7-1/4" long x 8-1/2" high
MK-00071

Micanan Transformer 575V-115V-50VA (MK00161)

MM00022

Micanan Support U-Bracket H/HHD MSI0015

  • Fits PRO-H/HHD
MF00009

Micanan Hex Head Bolt 1/4" - 20 UNC x 2-1/4" Partial Thread

  • Used on PRO-HHD
  • 1 required per operator
SPUR_GEAR

Spur Gear For Holdown Assembly

SMF5005

Adjust Holdown Assembly With Internal Float ** Price by Quote

  • Ratchet Bar Not Included
  • A brake band hold-down for a mechanical dock leveler includes a frictional brake that grabs the hold-down when the ramp is at the proper elevation.
  • If additional upward force (this can happen when trailers move up and down when trucks are loaded or unloaded) is applied to the ramp the frictional brake will give way just enough to accommodate the change.
  • This prevents the dock leveler ramp from being damaged.
  • For Serco mechanical dock levelers
27-24416

Truck Door Dual Torsion Spring Assembly 96/33 for Whiting Roll-Up Doors

  • Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
  • Springs are treated with rust preventative
  • Roadside cable drum is color coded RED
  • Specs: Shaft Length: 96" Spring Length: 33" Wire diameter: .182 Winding cone color: Green
SRB-4

Standard Riser Bracket 4" Above Dock

  • Standard 4" Riser Bracket for 6" Above Dock Door or Less
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
Specification Sheet
ME123-C7

Miller Edge Flat 3-1/2" Wide PVC Mounting Channel Sold by the Foot

DBE-30

Molded Rubber Bumper Black 30" L x 4 1/2" W 3" Projection 6-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Ideal for light traffic loading docks.
  • Molded bumpers are molded in one piece and will not warp rust rot or harden.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles.
  • Bumper comes with 6 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
    • .......more details
LB1210-36

Laminated Bumper Standard Black 10" x 36" 12" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB1012-12

Laminated Bumper Standard Black 12" x 12" 10" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB912-36

Laminated Bumper Standard Black 12" x 36" 9" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
TB410-14SF

Steel Faced Laminated Bumper Black 10" x 14" 5 1/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB412-18SF

Steel Faced Laminated Bumper Black 12" x 18" 4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB612-18SF

Steel Faced Laminated Bumper Black 12" x 18" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-14SF

Steel Faced Laminated Bumper Black 10" x 14" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
8010

LiftMaster DC Chain / Cable Drive Garage Door Opener ***Discontinued***

  • Customized DC Motor with soft start/stop action.
  • Chain/cable square steel rail (SSR) system for efficient operation and standard performance.
  • Security+2.0 increases remote control range and reduces interference for consistent operation.
  • PosiLock® electronically protects against forced openings.
  • The Protector System® invisible light beam auto-reverses the door if there is an obstruction.
  • Comes with: Door Control Button (883LM) 1-Button Remote Control (891LM)
    • .......more details
LB612-12

Laminated Bumper Standard Black 12" x 12" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-24

Laminated Bumper Standard Black 10" x 24" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-12

Laminated Bumper Standard Black 10" x 12" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB406-24

Laminated Bumper Standard Black 6" x 24" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
.207-3-9-RHW

Mini Storage Spring .207 x 3" x 9" long Right Hand

Examples of ends on mini storage springs
RESET014

Manaras Resettable Overload Fuse 17A 1 Phase

HINGE-311-PCG

Powdercoated Hinge #3 x 11 gauge Grey ** To Extent of Inventory

  • Heavy Duty 11 gauge offset hinge #3 - 0.73 lbs
  • Powdercoated Grey
  • For use with 7/16" stem rollers
27119

Doorlec Electric Motor TEFC 3/4HP 208/480/575V DC423

  • Frame size is 56
MG00013

Micanan Ribbed Hex Nut 3/8" - 16 UNC

  • PRO-GHC operator parts
  • 8 required per operator
MD-00005

Sprocket 410B12 3/8" NO KW 2 SS 1/4"

90-PGR

LiftMaster Parking Gate Radio Mod. Kit

  • G90PGR includes the limit switch wiring and bracket.
  • Used on PG HBG and BG models.
K20-1050C-2TLP

LiftMaster Electric Motor 1/2 HP 115/230V 1Ph TEFC Logic

VWS-34-GOLD-OAK

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Gold Oak *** No Longer Avaialble - USE MEDIUM OAK

  • Pan head
MP-00032

Micanan Center Mount Modification W/ No Chain Hoist PRO-J

  • Provides for center mount installation of a jackshaft operator
  • Operator output shaft is coupled in line with door shaft assembly
  • Couplings NOT supplied
  • NOTE: Reverse limit modification required
BI-004

Astragal Bottom Cloth Black PVC Sold by the Foot

PRO-APTB-7511-U

Micanan 3/4HP 115V 1P Apartment Trolley Operator N1 Eyes Monitored ECB with Brake

  • Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
  • Low clearance design for apartment applications (9.5")
  • External radio control terminal strip
  • 3-btn O/C/S control station Nema-1
  • Solenoid brake installed
  • Door speed 12" per second
    • .......more details
CB53201000

Cable 5/32" 7x19 1000' Galvanized *** special order

  • Galvanized cable 5/32" 7x19 1000ft spool.
  • Cable break strength: 2800 lbs
E/BLOP/122

Automatic Systems Red Arm Light - 2 Sets

  • Increases visibility of the arm on BL229 gate operator
CB380500

Cable 3/8" 7x19 500' Galvanized

  • Galvanized Cable 3/8" 7x19 500ft spool.
  • Cable break strength: 14000 lbs
MX00034-575V

Micanan Brake Assembly for PRO-HHD with 575V Solenoid (MX00206-575)

  • Complete brake assembly including 575V solenoid - solenoid cover sold separately part #MM00011
5001-9-WHITE

Residential Side & Top Weather-Strip 9' Long - White

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
MB-01002

Micanan Electric Motor Only 1/2HP 110/220V 1PH Base Mount TEFC FR56

  • Base Mount TEFC electric motor
  • Fits models: TW TBW JWHWHHDW SDW
1005-1-3/8-10'

Aluminum Bottom Retainer U-Shaped 10' Long

  • For door thickness 1-3/8"
HBS23LU

Stainless Steel Low Headroom Bottom Fixture 2-3" Door 2-3" Track Single End Stile Sold per Pair

  • Manufactured with Heavy Duty 12 ga. Rust-Proof 304 Stainless Steel
  • Laser Cut for a Clean Finish
  • For Low-Headroom Track
  • For 2" or 3" Doors
  • Fits 2" or 3" Track
  • Single End Stile
    • .......more details
MU33-2WIRE-LH-Y

Miller Edge MU33 2-Wire NM Left Hand Yellow - Sold per Foot

  • MU style bumpers are designed for use with aircraft hanger doors and large specialty doors.
  • Must specify the exact length in feet and inches when ordering.
  • Mounts vertically or horizontally
  • Sensitivity: nominal 8-13 ibf
Worksheet
BCH101L5L-BZ

LiftMaster 1 HP 115/230 VAC 1 PH Commercial Hoist Op L5 Carwash and Roller Bearing Mod. LH ***No Longer Available

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
1116633903.S

Overhead 3-btn Transmitter 390 MHz

  • Replaces the 1091303903.S
  • 3-channel transmitter opens and closes 3 doors
  • Codes using 9 dip switches with 3 positions
  • Battery (ALK12V) and visor clip included
MG020-Y-2E-03

Miller Edge Sensing Edge Yellow 2-Wire End Outlet 3 ft Long

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
SPECIAL-ORDER-SS

Special Order for Stainless Steel Door Products

BEARING012

Manaras Flange Bearing Green for 1' bore ** Repl. by BEARING047

  • 15/32" bolt holes
SL-300T

Skylink 1-Btn Visor Mount Transmitter 300MHz ***No Longer Available

  • Easy to carry or clip on sun visor.
  • Works in conjunction with Skylink Universal Receiver: Model SL-300R.
  • Operating range of 100 feet and more.
  • 12V alkaline battery included.
Installation Manual
MX00034

Micanan Brake Assembly for PRO-HHD Solenoid NOT included (MX00206)

  • Solenoid sold separately
MX00034-208V

Micanan Brake Assembly for PRO-HHD with 208V Solenoid (MX00206-208)

  • Complete brake assembly including 208V solenoid - solenoid cover sold separately part #MM00011
5001-14-DK-BROWN

Residential Side & Top Weather-Strip 14' Long Commercial Brown

  • PVC wrapped
  • Painted aluminum retainer
  • Dual fin vinyl
HSO112

Hinge 1/2-Hinge OHD "A" Style 12-ga Stainless Steel

  • Manufactured with Heavy Duty 12ga. Rust-Resistant 304 Stainless Steel
  • Laser Cut for a Clean Finish
BK023/PR

Commercial 3" LHR Bottom Brackets Sold as a Pair (L & R)

  • Same as BB-6-3 reinforced c/w cotter and clevis pins
  • Use with: 3" straight track
  • Sold as a pair (includes one left and one right).
  • Height: 10-15/16"
  • For 2’’ or 3’’ tracks. 2 holes on the roller holder to allow both applications
RW-PANEL

Richards Wilcox Replacement Door Panel Special Order

  • As per customer's requirements
MX00119

Micanan Trolley Hardware Bag Complete (MQ00012)

MB-05507

Micanan Electric Motor Only 1 HP 230/460V 3PH Base Mount TEFC FR56

ANT-1A

Linear 7-inch Rubber Duck Mid-Range Antenna *** To Extent of Inventory

  • Antenna for Linear’s 27 MHz mid-range transmitters and receivers
  • Seven-inch ”rubber duck” style
  • Supplied with CON-180A straight antenna connector
  • Order CON-90A connector for right angle antenna mounting
  • Dimensions .65” W x 7” H x .65” D
  • Same as: SNE00031
    • .......more details
PRO-GH-10083U-R

Micanan 1 HP 208V 3P Gearhead Op. N1 Eyes Monitored ECB Right Hand

  • Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
  • Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
  • External radio control terminal strip
  • Three button O/C/S control station Nema-1
  • Supplied with Nema-1 photocells
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
41D96-1

LiftMaster Light Lens for 8500

  • Also known as: 108D96-1 41D96-1 108D0096-1
MD00020

Micanan Sprocket 50B40 x 1-1/4" bore has 1/4" and 3/8" keyway with set screw

MT22-MON-Y-RH

Miller Edge 4-Wire Monitored Pressure Sensitive Edge Yellow Sold per Foot

  • Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
MU22-2WIRE-E-G

Miller Edge MU22 2-Wire End Gray - Sold per Foot

  • Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet