Devanco Canada - Get The Right Garage Door Opener‎ and Parts

STRUT-3-30'

Door Strut 3" Hemmed 30ft Long

Reinforcement bar 3"

12-4164

Flange Mount Bearing Self-Aligning

Works with SL575 SL580 SL585 SW470.SW470 gate operator
Same as K12-4164 124164

SL585103UL

LiftMaster Industrial Slide Gate Op.1 HP 208/230/460V 3 Phase - Heater NOT Incl. ***NLA

High-Starting Torque continuous-duty motor (available in 1/2 1 and 1 1/2 HP)
Operator Duty Rating: 20 cycles per hour
Wormgear Reduction: 20:1 Wormgear Reducer
Adjustable Friction Clutch: helps to protect gate and operator from damage should the gate meet an obstruction
Chain: #50 nickel-plated (25ft. supplied)
Chassis: heavy-duty steel chassis and lockable powder-coated steel cover withstands extreme and harsh environments

.......more details

Installation manual Manuel d'installation Sell sheet Brochure

M-0133

Autogate Proximity Magnets

HSC-BOLT-3002

Replacement Center Bolt for HSC-600 Swager Sold Individually

Replacement bolt only (1)

6X30PO50

Devanco Loop 6' x 30' pave-over 50' lead-in

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

P-0128/LH

Autogate Retro Bracket Left Handed System

This is needed to change over to their current motor

LM56A

LiftMaster Magnetic Proximity Reed Switch

Normally Open magnetic sealed reed switch; proximity switch
Used for overhead door contacts.

Installation Manual

RADIO-RE901B

Manaras Open/Stop/Close 24V receiver Nema 4/12 313 MHz

Wall mount
Fixed code / Dip switch technology
Commercial reciever( Learn button) 1-door
16 Fixed codes / Receiver
Nema 4/12
Approx 100' range

.......more details

PL-A21-RPM-WHEEL

Lynx RPM Reader Wheel

41D4509

LiftMaster Motor Kit ATS211

Also known as: K75-16424 41D4509 123D0155 123D155

MGR20-Y-2U-PER-FT

Miller Edge Sensing Edge Round Yellow 2-Wire Universal Outlet Sold Per Foot

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
Non-monitored edge
Maximum length is 10ft (over 8ft requires LTL shipment at additional cost)

MD-00338

Sprocket 40B15 1" Bore 1/4" KW 2SS

15 tooth sprocket for #40 chain

RELAY008

Manaras Relay AB 700-HA33A24 11 Pin TP

Allen Bradley

P-0130

Autogate Motor Belt Tensioner Upgrade Kit

This isneeded to change over to their current motor

MV00210

Micanan Banner Reflector 3"

Compatible with Banner #MV-00300 reflective photocell

7001-10-ANODIZED

Commercial Side & Top Weather-Strip 10' Long - Anodized 7001-AB

Anodized galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

C-24-12-2-BLK-TINT

Thermal Window 24"w x 12"h for 2" Door Black Tinted Grey Glass

For 2" thick door

41A5635A

LiftMaster Receiver Logic Board 390 MHz ** To extent of inventory

Compatible with a number of dual capacitor chain drive models including 2575 2585 2595 PD752 and PD758S manufactured between 2001 and 2005
Also known as: 41A5483-15 41A5635 01A5635A

Q118

LiftMaster Access Door Keys Qty 2 K80-50295 for HCTDC CSL CSW RSW

Also Known as K80-50295

CP100C

Coupler Specialty Coated 1" Bore

Coated with 1000 plus hr salt spray rated finish
1" Bore with 1/4" keyway
Malleable iron for high strength and resistance to shock loading
Coupler halves separates and is adjustable
4-(3/8"-16 x 1" square head set screws installed
Rust inhibitor coating

.......more details

2524

Whiting Balancer Bracket End - Roadside for Whiting Roll-Up Doors

Steel construction
Plain finish
Cross Reference: W #2524 for #2376 balancer

SPR41B36X11/4

Sprocket 41B36 x 1-1/4" Bore 1/4" Keyway

Same as MD-00322

BPPB17512

Devanco Bottom PVC Moulding White for 1 3/4" Door U shaped 144"(12')

J753L5

LiftMaster Industrial-Duty Jackshaft 3/4 HP 575V 3Ph L5

Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
J operators are attached to the door jackshaft to indirectly drive the door
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0® safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you

SHAFT120

Manaras Input Shaft for OSHW

H8NA12

Richards-Wilcox Hinge 8NA x 12 Gauge Roller Bracket

Galvanized 12 gauge hinge

H5NA12

Richards-Wilcox Hinge 5NA x 12 Gauge Roller Bracket

Galvanized 12 gauge hinge

CPT-223-50

Miller Edge Bulk Extrusion 50' roll

For DIY quick fixes to repair or replace sensing edges for sectional and rolling steel doors measuring 1-1/2" to 2" thick with a mounting channel.
Sensivity: 15lbs max activation
Lead wire 18"-22 gauge unversal
Wire configuration: N.O.
Electrical interface: sealed module- provides seamless connection to logic or relay type operators
ANSI/UL325 recognized component

.......more details

10W8

Resistor 10W 8K OHM

4JW-LEFT

Rolling Steel 3" Curved Cast Windlock 273002 LH

Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
A wind lock is a small metal device that is attached to each slat.
Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
With a windlock your door can operate efficiently despite wind load or pressure.
Windlocks are easy to add on to any existing rolling steel or shutter door

.......more details

H14G04-BLACK

Hinge #4 x 14 gauge Black Powder Coated

Black powder coated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 2-3/4" wide
Individually wrapped

12502

Doorlec Clutch Plate Aluminum 4" dia x 5/8" bore

Works with model LJ/LJH

H14G03-BLACK

Hinge #3 x 14 gauge Black Powder Coated

Black powder coated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 2-3/4" wide
Individually wrapped

BK149/PR-BLACK

Residential Bottom Corner Bracket RBB-75 Black Powder Coated sold as a pair

For use with 2" straight track
Individually wrapped

MOUNTSHAFT015

Manaras Hoist Shaft Kit for OGH

2510-527

Linear Motor Drive Inverter Assy 2HP 230V 3P

For model VS-GSLG-723

41A7278

LiftMaster Sprocket Kit 12-Tooth

Includes sprocket and screws

CAP378

Capacitor 110/125VAC 378-454MFD

378-454 mF 125 VAC 50/60 Hz
Used on 1/2 HP LiftMaster operators

26CW14522-CUT

Truck Door Intermediate Panel (12" x Cut-To-Size) Painted White for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

CP-BRK-CAM-MCJ

Lynx Retaining Plate & Hardware for MCJH

K10-10166

LiftMaster Clutch Plate

Also known as: 1010166 10-10166 142A122 AB112-00230 1090371 142C131 10-9037-1 G1090371 0890371 G1010166 112-00230

2806.162.18

Whiting .162 x 2-3/16 x 18" Roadside with Cones

M15A

Safety Inertia Brake 2" Bore 13727 Torque PCM15AP

Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
Ideal for commercial and industrial use; specifically with rolling shutters and balanced and well maintained rolling doors.
Fully resettable and reusable after lockout ocurrs.
Commonly paired with commercial safety bottom brackets in sectional door applications.
Fits 2" shaft
Note: Sectional torsion door systems must be well maintained to ensure desired inertia brake activation.

.......more details

Manual Technical data Sell sheet

P-75

End Plug for 3/4" ID Rubber Hose

Sold per plug

1004-2-14'

Aluminum Bottom Retainer 2" U-Shape with Reinforcement 14 ft***Actual Length 14'2"***

For door thickness 2"

UTIL025

Utility Limit Switch Telemecanique

Installation Manual

JA383

FAAC Sprint 383 Board 115V

BCSI-PM10

Pivin Drapeau Clutch Plate for BCSI Gate Operator ** Price by Quote Only

Friction Plate

DW-3S-300

Fraba Air Wave Switch Larger Housing with Copper End NOC

Fraba DW3S-300 air switch 10008797-2
Normally Open Contact (NOC)
Screw Type Connector
Dimensions: 158x60x39 mm (6.22" x 2.36" x 1.54 '')
Housing: ABS Switch: PA6V0 Nema4
Normally Closed Contact achieved by adjusting the sensitivity screw

.......more details

Operating Instructions

GATE-SP-ORDER

Special Order Gate

Made to customers specific requirements

RELAY026

Manaras Relay DPDT 120VAC

HW-SP-BL

Lynx Disconnect Spring

RP-BRK-WALL

Lynx Wall Bracket RSI

HW0427-LH

SteelCraft Commercial Bottom Bracket Left Hand Only

Left Hand bracket only
Can be used for both 2" and 3" tracks
To be used on door tracks that are installed wide enough to accomodate the side cable pulley
Door hardware must start with a #1 hinge on the bottom panel for both 2" and 3" hardware
Adjustable cable can level door from the ground
Heavy gauge steel construction

.......more details

SSZP8-6-114

Solid Shaft 1-1/4" Keyed Zinc Plated 8'-6"

ST101-INT-WHITE

Lynx Intermediate Panel White 10x24

MH00027

Micanan Collar 1/2" ID

INTERFACE001

Manaras Interface module Compatible w/PHOTO062

Enables the connection of monitored photoelectric cells to a Board or Electromechanical control without monitoring function

WHITING-PW

Whiting White Urethane Topcoat Option Dry Freight Door Panel

This is an option when ordering a panel

MP00227

Micanan Track and #41 Waterproof Chain for 12' h Door

SL595203UL

LiftMaster Dual Voltage Slide Gate Op.2 HP 208/230/460V 3 Phase - Heater NOT Incl. UL325 ***NLA

UL 325 compliant system.
Power: 208/230/460/575 VAC. 3 Phase.
Accessory power: 24VAC 500mA max.
Monitored safety inputs: 3 Main Board 3 Expansion Board.
Temperature specs: Without Heater: -4°F (-20°C) to 140°F (60°C). With optional heater (HTRNB: HTR460 for 460V operators): -40°F (-40°C) to 140°F (60°C)
Gate travel speed: 12 in. per second.

.......more details

Installation manual Manuel d'installation First step for installation Première étape pour l'installation Sell sheet Wiring diagram Wiring diagram 575V

H-0168

Autogate VBelt Banded B-66

New Style Double Reduction

H-0166

Autogate VBelt Banded B-59

New Style Double Reduction

29150

Doorlec Transformer 600Vpr 120V sec. 50VA

K1D8389-1CCU

LiftMaster Upgrade Kit with Eyes DC Pad Mount for UL325

Upgrade Kit for models CSW24V CSW24VH CSW24VDC CSL24V CSL24VH and CSL24VDC UL325 Approved Gate Operators; manufactured 2012 to 2015.
Complete kit includes: Main Control Board Expansion Board LiftMaster® Monitored Retro-Reflective Photoelectric Sensor Kit UL Upgrade label and Adapter Harness (used with CSW24V CSL24V and CSL24VH only)

31117

Doorlec Sprocket 41B12-1" Bore. KW/SS

MD-00515

Micanan Roller Chain #50 Waterproof 10' Pack

PRO-SD-10011-U-RH

Micanan 1 HP 115V 1P Horizontal Sliding Door Op. Monitored ECB N1 Eyes Right Hand

Designed for use on commercial / industrial sliding doors or sliding fire doors
External radio control terminal strip
3-btn O/C/S control station Nema 1
#41 roller chain & sprockets on all internal drives
Heavy duty 5L v-belt
Solenoid brake standard

.......more details

1005-1-1/2-14'

Aluminum Bottom Retainer U-Shaped 14' Long

For door thickness 1-1/2"

MV-00049

Micanan AB Reflective Photocell GRU 115V with MK00480 bracket (60-2439)

Includes eye reflector and bracket

K75-39337

LiftMaster Trolley Nut Kit LA500

The travel nut on LA500DC and LA500DCS gate operators may break when excessive force is applied to the gate such as being struck from a vehicle.
The travel nut can be identified as the white plastic nut that attaches to the internal lead screw of the arm.
The symptom of this problem is that the trolley assembly slides back and forth along the guide slots without mechanical restraint.
LiftMaster has created Trolley Service Kit K75-39337 with all the necessary parts and provides instructions on how to replace a damaged travel nut within an LA500 arm

Replacement instructions Instructions de remplacement

GD-WAX

Devanco Canada Garage Door Wax 467g Aerosol

Ozone Friendly Door Wax with anti-wear and extreme pressure additives.
Silicone Free
Aerosol Wax that sprays on and buffs effortlessly to create hard shell finish. •Excellent wax for anything that needs reviving shines all painted surfaces.
16.5 oz Cans
Available for private label

Safety data sheet Fiche de données de sécurité

PRO-APTC-5083-U

Micanan 1/2HP 208V 3P Apartment Trolley Op. Photo Eyes Monitored ECB

Low clearance design for APT applications (8.5")
Door speed: 7" per second
N-4 Micanan compatible monitored photocells included
Monitored board
Side access hinged cover for easy access to controls
Three button open-close-stop control station Nema-1

.......more details

Installation manual

CP-SH-58-1038-HDC

Lynx Complete Limit Shaft Assembly for HDC

5/8" x 10-3/8"
Same kit used for MCJH except the HDC has 1 extra nut

MH00096

Micanan Flange Bearing 3/8" ID

Replaces MH00019

K94-37848-1

LiftMaster Electric Motor 1HP

Replacement motor for SL595101U

3500

Whiting Beverage Align Roller 1" Screw Type

A Whiting original

20104

Doorlec Coupling Spring 5/8" LJH

2000P

LiftMaster HD Roller Cage Bearing Hinge Flat Mount Prime Coated Sold in Pairs

Heavy Duty Construction for Maximum Durability
Dependable Roller Cage Bearing Design
Even Weight Distribution
Five Times The Weight-Bearing Surface of the Nearest Large Hinge
Largest Weld Surface in the Industry
Easy to Fully Lubricate

.......more details

IRB-TX

EMX Industries Transmitter Board Only for IRB-4X *** NLA

MDT-2A

Linear 3-Channel Visor Transmitter MegaCode 318 MHz

Compatible with all Linear access receivers and controllers
Superior transmission range
Factory programmed MegaCode format supports over 1000000 codes
Unique ”Extra” top button
High visibility operate LED
Visor clip included

.......more details

Programming instructions

AVP-KEY

Cylinder Key for AVP-1

Key only

GOFF-G2-LITE-3000

Goff High Performance Door Made to Order

Custom made to spec

MD-00348

Sprocket 50B26 x 1" 1/4" KW 2SS

SETR2641AM2K

Erone 2-Channel Mini Transmitter Black 433MHz

Heavy-duty construction
Elegant & easy to carry
Unobstructed range: 656 ft (200m)
60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
Two lithium batteries (CR2016) included

Wireless System Chart

PRO-GH-10011U-L

Micanan 1 HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

93D341

LiftMaster Cover Only Silver for EL25

Also known as 041D0341 41D341
Replacement cover for EL25

PRO-GH-7553U-RH

Micanan 3/4HP 575V 3P Gearhead Op. N1 Eyes Monitored ECB Right Hand

Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
External radio control terminal strip
Three button O/C/S control station Nema-1
Supplied with Nema-1 photocells
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

PRO-GH-7543U-L

Micanan 3/4HP 460V 3P Gearhead Operator N1 Eyes Monitored ECB Left Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PRO-4X_MOD_5HP

Micanan Nema 4X Modification 5HP

This modification provides a washdown motor N-4X corrosion proof stainless steel control box enclosure waterproof drive and limit chain and a corrosion proof three-button station.
For options M & U Micanan N-4X photocells are supplied
For 5HP motors

K1D7078

LiftMaster EMI Board

This is a replacement EMI Board. Compatible with LiftMaster® Model HCT Overhead Gate Operators

.437-6-L-C

Cut-to-Length Torsion Spring .437 x 6" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

.421-514-L-C

Cut-to-Length Torsion Spring .421 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-514-INSTALLED

.393-6-L-C

Cut-to-Length Torsion Spring .393 x 6" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

.393-334-L-C

Cut-to-Length Torsion Spring .393 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-375-INSTALLED

.375-6-L-C

Cut-to-Length Torsion Spring .375 x 6" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

.343-334-L-C

Cut-to-Length Torsion Spring .343 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

LDCO850

Linear 800 Newton Smart DC Powered Garage Door Opener spott Wi-Fi Accept Both Belt or Chain Rail

The energy-efficient DC-powered operator that runs at an AC-equivalent speed.
DC drive motor with soft-start and soft-stop for smooth quiet long-term reliable performance.
Optional Battery Backup available for added peace of mind. Sold separately
Low-power standby mode dramatically reduces energy consumption
Supplies 800 Newtons of lifting force for heavy doors
Compatible with belt-drive or chain-drive T or I beam rails up to 10'

.......more details

Remote compatibility chart