Devanco Canada - Get The Right Garage Door Opener‎ and Parts

26CW945215-CUT

Truck Door Intermediate Panel (11.5" x Cut-to-Size ) Painted White for Whiting Dryfreight

These panels are cut to customer's exact measurements.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white

.262-258-L

Cut-to-Length Torsion Spring .262 x 2-5/8" Left Hand Wound Red/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

218759

Torque Force Spring Failure Device 1-1/4" Shaft Right Hand Side

For springs 2" up to 6"
This device can be applied on Industrial OH doors that are manual or motor operated
Must be installed on a keyed shaft

PRO-HB-7521U-RH

Micanan 3/4HP 230V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

PRO-HB-7581U-RH

Micanan 3/4HP 208V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

PRO-HB-5083U-LH

Micanan 1/2HP 208V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

PRO-H-5053-E-LH

Micanan 1/2HP 575V 3P Hoist Operator NM ECB No Eyes Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Solenoid brake OPTIONAL
Non-monitored board NO photoeyes

PRO-H-5043-U-LH

Micanan 1/2HP 460V 3P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

MK-00703

Micanan Harness 1-Phase 5-Relay Board

MK-00010

Micanan 3-Pole Power Terminal Strip

PRO-PANEL

Micanan Custom Panel

Made according to customer's requirements

MV-00238

Micanan Key Switch O/C Tamper Proof w/Best Core Cylinder Nema 1 Flush Mount

ME110-2W-BLK-R

Miller Edge 2-Wire Black Right Hand Outlet 7/8" wide x 3/4" high Sold by the Foot

Electromechanical slide in edge for counter shutters rolling doors and barrier arm applications.
Touch sensitive signaling that allows for immediate stopping and reversing of motion.
Temperature range -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet Sell Sheet

PRO-J-10083-U-LH

Micanan 1HP 208V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

.421-334-L

Cut-to-Length Torsion Spring .421 x 3-3/4" Left Hand Wound Gold

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-375-INSTALLED

.363-514-L

Cut-to-Length Torsion Spring .362 x 5-1/4" Left Hand Wound Green/White

Priced per inch - cones sold separately
For factory installed cones use part no. C-514-INSTALLED

.319-514-R

Cut-to-Length Torsion Spring .319 x 5-1/4" Right Hand Wound Blue/Green

Priced per inch. Cones sold separatly.
For factory installed cones order part # C-514-Installed

.306-514-L

Cut-to-Length Torsion Spring .306 x 5-1/4" Left Hand Wound Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

PRO-J-7521-U-LH

Micanan 3/4HP 230V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

PRO-J-7581-U-RH

Micanan 3/4HP 208V 1P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

PRO-GT-15011-U

Micanan 1-1/2HP 115V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

On-Board receiver holds up to 20 transmitters

PRO-GT-10083-U

Micanan 1HP 208V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-5053-U

Micanan 1/2HP 575V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

.406-6-R

Cut-to-Length Torsion Spring .406 x 6" Right Hand Wound Blue/Yellow

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

PRO-TB-10043-U

Micanan 1 HP 460V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 & 1 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-T-7553-U

Micanan 3/4HP 575V 3P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

PRO-T-7581-U

Micanan 3/4HP 208V 1P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

PRO-LTB-5021-U

Micanan 1/2HP 230V 1P Commercial Trolley Operator With Brake N1 Eyes Monitored ECB

Designed for use on commercial doors with standard lift tracks that require no more than 15 cycles per hour
Trolley track for door up to 12ft standard upcharge for 14' & 16'
Door speed 9 inches per second
UL325
On-Board receiver holds up to 20 transmitters

60-7248-CBI087

Wheel Chock Safety Pkg incl'd: yellow ductile iron chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) CBI-087 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
Cast Ductile Iron for Impressive Strength
Painted Yellow for High Visibility
Size: 8-1/4" wide x7-1/4" long x 8-1/2" high

RELAY043

Manaras Relay 4-Pole 24VAC

Used on Manaras MLJ MLH MLT Models

HCRH1

Hinge Combination Roller Hinge Assembly #1 Galvanized

HRB-9

High Riser Bracket for 7" Above Dock or Higher 9"

High Riser 9" Riser Bracket for 7" Above Dock Door or Higher
Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information

HRB-8

High Riser Bracket for 7" Above Dock or Higher 8"

High Riser 8" Riser Bracket for 7" Above Dock Door or Higher
Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information

ME00071

Micanan Idler Shaft PRO-APTC

LB1210-24

Laminated Bumper Standard Black 10" x 24" 12" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB912-12

Laminated Bumper Standard Black 12" x 12" 9" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB812-36

Laminated Bumper Standard Black 12" x 36" 8" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TB412-24SF

Steel Faced Laminated Bumper Black 12" x 24" 5 1/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LLB620-22

Laminated Bumper Black 6" Projection L-Shaped 20" x 22" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.
This model has angles on both sides

.......more details

LB410-18

Laminated Bumper Standard Black 10" x 18" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

LB406-36

Laminated Bumper Standard Black 6" x 36" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

T007

Manaras Trolley Track 7ft for 1/2HP models *Actual length 114"*

For models MLT/OTH/OTBH 1/2hp only with Chain #48 (#410)

MK-00694

Micanan 10K OHM Resistor *** Discontinued Repl by MK00713

HINGE-111-PCG

Powdercoated Hinge #1 x 11 gauge Grey ** To Extent of Inventory

Heavy Duty 11 gauge offset hinge #1 - 0.61 lbs
Powdercoated Grey
For use with 7/16" stem rollers

K10-36183

LiftMaster Battery Tray for 33AH Batteries

For use with LA500

2806.139*130

Whiting Spring Assby .139 x 2-3/16 x 13" L Roadside

Replacement torsion spring with cones
Specs: .139 x 2-3/16" x 13" Long
Roadside
For Curbside order part # 2807.139.130

.363-334-R

Cut-to-Length Torsion Spring .362 x 3-3/4" Right Hand Wound Green/White

Priced per inch - cones sold separately
For factory installed cones use part no. C-375-INSTALLED

41C5497

LiftMaster Wiring Harness Kit High Voltage

For use with various LiftMaster® and Chamberlain® AC Chain Drive Garage Door Openers; manufactured after 2001

22016

Doorlec Selector Switch 2 Position OFF/ON

1104-8FT-GREEN

Residential Side & Top PVC Weather-Strip with cap 8' Long - Green (R)

Green rigid vinyl retainer with green flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

5001-10-WHITE

Residential Side & Top Weather-Strip 10' Long - White

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

K94-33961

LiftMaster Wire Harness Kit MT MJ MH

MB-15204

Micanan Electric Motor Only 2 HP 575V 3PH C-Flange TEFC 145TC

Fits GT GH GHC & GSD

GMA-3A-5PKG

Fuse Mini Fast-Acting Glass Fuse 3A 250V 5mm x 20mm

5 per pack

7001-9-BRONZE

Commercial Side & Top Weather-Strip 9' Long - Bronze (BZ)

Bronze galvanized steel with bronze dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (20)

MU22-4WIRE-U-Y

Miller Edge MU22 4-Wire Universal Yellow - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

5001-9-DK-BROWN

Residential Side & Top Weather-Strip 9' Long Commercial Brown

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

.283-334-L

Cut-to-Length Torsion Spring .283 x 3-3/4" Left Hand Wound White

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

2376.177_27.850

Whiting Torsion assembly .177 wire size 27" spring length 85" shaft

MT22-MON-Y-LH

Miller Edge 4-Wire Monitored Pressure Sensitive Edge Yellow Sold per Foot

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

.262-334-R

Cut-to-Length Torsion Spring .262 x 3-3/4" Right Hand Wound Red/Yellow

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

SL14COP

Copper Sleeve 1/4" 100 Sleeves per Pkg *price on request

Oval sleeves ONLY
Stops sold separately part # ST14COP

PRO-H-7511E-LH

Micanan 3/4HP 115V 1P Hoist Operator NM ECB No Eyes Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Solenoid brake OPTIONAL
Non-monitored board NO photoeyes

Installation manual Specification sheet

1EBX

Explosion Proof 1-Btn Control Nema 7 & 9 Surface Mount

NEMA 7 & 9
Explosion proof enclosure
One button control
Button: 6 amp @ 125VAC
Normally open
Metal Enclosure: H=6-1/8" W=3" D=4-3/8"

.......more details

MOTOR274

Manaras Electric Motor 3/4HP 575V 3PH

��This item is compatible with BRAKE011

G651209P

LiftMaster 10ft PVC Arm Square Yellow/Black Stripes **DISCONTINUED

Requires clamp model # G108019 sold separately
For use on barrier gate operator BG770

.218-3-144-RH

Torsion Spring Mini Storage .218 x 3" x 12ft Right Hand

Examples of ends on mini storage springs

JDMG-LG-BBU

GDI Battery Backup Option G3243

Battery Backup option for JDMG-LG operator

MK00188

Micanan Auxiliary Contact Block

STRUT-2-1/4-16'-NH

Door Strut 2-1/4" Non Hemmed 16ft Long

Reinforcement bar 2-1/4"

111537.0001.S

Overhead Sprocket 38T 1/4P

Sprocket for the limit shaft
For the 1/2 hp 3/4 hp & 1 hp hoist RHX operator.

26-943255-CUT

Truck Door Bottom Panel with Seal (15.5" x cut-to-size) for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
Comes only with bottom retainer and seal (installed)

5001-18-BLACK

Residential Side & Top Weather-Strip 18' Long - Black

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

K12-8033

LiftMaster Female Rod End RH

Lower rod end for BG770 BG790
same as part # 12-8033

5001-WG-18-MOAK

Residential Side & Top Weather-Strip 18' Long Wood Grain Medium Oak with Screws

PVC wrapped
Painted aluminum retainer
Dual fin vinyl
Painted screws to match. 1 screw per foot
Special order
Sold by full case quantity (20)

.......more details

5001-WG-8-MOAK

Residential Side & Top Weather-Strip 8' Long Wood Grain Medium Oak with Screws

PVC wrapped
Painted aluminum retainer
Dual fin vinyl
Painted screws to match. 1 screw per foot
Sold by full case quantity (20)

1104-14FT-BRONZ

Residential Side & Top PVC Weather-Strip with cap 14' Long - Bronze (F)

Bronze rigid vinyl retainer with bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

71-EB208H

LiftMaster External Brake Solenoid 208V with Cable **to extend of inventory

NUT022

Manaras Lock Nut Zinc Plated 3/8-16 Hex Nylon

Used on old MJH

MGS20-Y-2U-05

Miller Edge Sensing Edge Square Yellow 2-Wire Universal Outlet 5ft Long

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty

9301644400

Galvanized Torsion Spring .306 x 3-3/4 x 44" L with Cones RHW

ME111-E

Miller Edge Black End Outlet 7/8" wide x 1-1/2" high Sold by the Foot

Slide in style edge for barrier gate and counter shutter application.
Touch sensitive signaling allows for immediate stopping/reversing of motion depending on application. •Temperature Range: -30F to 155F
Lead wire: AWM 22 gauge 2ft length
Sensitivity: nominal 6-8 PSI
Vertical or horizontal mount
ANSI/UL325 recognized component

.......more details

Installation Manual Worksheet Sell Sheet

COVER048

Manaras Plated Solenoid Cover for OSH

Cover only

GUIDE014

Manaras Chain Guide

50800P

LiftMaster Treadle Protection Plate **discontinued

GH4416-06-L

Green Hinge #6 12-ga Left Hand *** to extent of inventory

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

GH4416-03-R

Green Hinge #3 12-ga Right Hand *** No longer available

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

MP00017

Micanan Up-Charge Track and #410 (#48) chain for 18' h Door *Actual length 246"*

For 1/3 HP and 1/2 HP operators only

MP00019

Micanan Up-Charge Track and #410 (#48) chain for 20' h Door *Actual length 270"*

For 1/3 HP and 1/2 HP operators only

MP00013

Micanan Up-Charge Track and #410 (#48) chain for 14' h Door *Actual length 198"*

For 1/3 HP and 1/2 HP operators only

H753L5-LH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 208/230/460V 3P Logic 5 Left Hand

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

RN0034-SS

Roller 3" White Nylon 4-3/4" Stainless Steel Stem Double Sealed Bearing

A supreme double sealed bearing roller that never requires lubrication
Ideal for high usage and high moisture areas ie..carwash
7/16" stainless steel shaft.
200 lb load 100000 cycles for a 12' door
Overall length is 5-1/2” and the shaft (stem) is 4-3/4” which includes the shoulder.

70.32

Whiting Stainless Steel U-Bolt 1-1/4"

Sold per U-bolt

BK308

Jamb bracket J-08 #8 12 gauge

Sold by the piece
Height 4.00" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.