Devanco Canada - Get The Right Garage Door Opener‎ and Parts

610.9723

Whiting Panel Option for Long Pull Strap 32" L

This is an upgrade option when purchasing a door or bottom panel

HINGE-511-PCG

Powdercoated Hinge #5 x 11 gauge Grey ** To Extent of Inventory

Heavy Duty 11 gauge offset hinge #5 - 0.78 lbs
Powdercoated Grey
For use with 7/16" stem rollers

86-RP08-102

LiftMaster Roll Pin Short 1/4"x 1-1/2 Coiled 10/Pkg (K-SPSHORT)

Same as K-SPSHORT

2'6X6PO50

Devanco Loop 2'6 x 6' pave-over 50' lead-in

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

.312-258-R

Cut-to-Length Torsion Spring .312 x 2-5/8" Right Hand Wound Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

MGR20-Y-2U-PER-FT

Miller Edge Sensing Edge Round Yellow 2-Wire Universal Outlet Sold Per Foot

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
Non-monitored edge
Maximum length is 10ft (over 8ft requires LTL shipment at additional cost)

MGH-6237-M-N1-LH

Manaras 3 HP 208V 3P Jackshaft Monitored w/N1 Eyes Left Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

Specification Sheet Drawing Diagram

PRO-GHW-5053U-R

Micanan 1/2HP 575V 3P Gearhead Op w/Carwas Mod N4 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

2376.182.27.950

Whiting Torsion assembly .182 wire size 27" spring length 95" shaft

This is a full balancer assembly
Twin springs one road one curb with a shaft through it

OTBH-6532-AM05

Manaras Trolley Operator 1/2 HP 600V 3Ph Monitored Board w/N4 Eyes Apt. Model

The Silencio model is a low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
100 cycles per day
It incorporates a drum-shoe type solenoid brake.
Tracks are an extra 36 lbs per track
#41 full roller chain
Includes monitored N4X eyes (PHOTO 061)

.......more details

STEELCRAFT-TD134

SteelCraft TD134 Replacement Panel Special Order

Ordered to customer specs.
Price by quote only

SP8-ARM

LiftMaster 8 ft. Arm with Yellow Padding. Requires MA031 ordered separately

Padded arm for MASDCBB3

50308

Doorlec Cam Shaft Assembly Comes With Bearings

Fits LJ LJH SGO

93519.5260

Todco Side Seal 80" long Lip ** Special Order Quote Only

Special Order item. Must be quoted each time
Fits Fleetstar Door

5423.105

Whiting Side Seal 105" 5/16" Track Spacing

Quote required prior to sale to ensure correct fit

GALV-306-258-L

Cut-to-Length Torsion Spring .306 x 2-5/8" Left Hand Wound Galvanized Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

3228.3

Whiting 2" Nylon Roller 3" Stainless Steel Shaft

This is a Whiting original roller

202-0003

TNR Knock-Away Plate (Lasercut) for 10lb/ft Bottom Bar **** Price by Quote Only

K80-5001

LiftMaster Keyway 3/16 x 3/16 x 1-3/4"

For use with various LiftMaster® Gate Operators and Perimeter Access Solutions

OTBH-6212-M-N1

Manaras Trolley Operator 1/2HP 240V 1Ph Monitored w/N1 Photoeyes

The OTBH is a heavy-duty low headroom trolley operator
Designed for use on industrial standard lift sectional doors
It incorporates a drum-band type solenoid brake
25 cycles per hour 80 cycles per day
1/2 HP operators come with # 48 (410) roller chain
Includes PHOTO-070

.......more details

TDC1222-18

Liftmaster Comm. 18FT Trolley Angle set (10-5818-P x 2) and #41 chain pack (TDC41-18) ***Actual length 251"***

Double Angle Rails for doors up to 18'6" high
Includes #41 chain pack

GALV-306-258-144-L

Torsion Spring .306 x 2-5/8" x 12ft LH Galvanized Red

Wire size: .306
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

2100-1622

Linear Jam Nut 1"-14W 5/16 Tap Hole

25130

Doorlec Seal Oil CR6372

2807.156.170

Whiting .156 x 2-3/16 x 17" Curbside with Cones

GALV-363-334-L

Cut-to-Length Torsion Spring .363 x 3-3/4" Left Hand Wound Galvanized Green/White Price per Inch

Priced per inch - cones sold separately
For factory installed cones use part no. C-375-INSTALLED

GALV-218-2-L

Cut-to-Length Torsion Spring .218 x 2" Left Hand Wound Galvanized Yellow/Orange Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

DC-ADAPT125-100

Dyna-Hoist DC Series Adaptor 1-1/4" to 1"

50690-2

Doorlec Clutch Assembly for ETBH w/Double V-Belt

DHJ751L5-RH

LiftMaster Ind. Duty Hoist/Jackshaft Op. 3/4 HP 115/230 VAC Logic 5 Right Hand***Discontinued

Industrial-Duty Hoist/Jackshaft Operator with Internal Door Lock Sensor
Optimal for shopping mall applications with heavier rolling doors and grilles.
Provides a floor level chain hoist to ease manual operation in an emergency or power outage.
Includes a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.
Industrial Ball Bearings on 1" Output Shaft
Second Floor-Level Disconnect for Manual Lifting in an Emergency

.......more details

2807.162.220

Whiting .162 x 2-3/16 x 22" Curbside with Cones

GDI-TML31

GDI Trolley Bracket Only

Add on feature for JDMG-LG op

GDI-TLG51

GDI Trolley Kit Add-On Feature

This is an add-on feature to the JDMG operator
Includes: Trolley brackets traveller idlers arms

1104-10FT-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 10' Long - Dark Sandstone (DDG)

Garaga dark sandstone rigid vinyl retainer with Garaga dark sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

K07-8064

LiftMaster Lower Crank BG790

Also known as: G078064 07-8064

50304

Doorlec Hoist Shaft Kit w/Disconnect Coupler

For models LJH LJHW

4580-304-CHOC/BRN

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Chocolate Brown 458-19 *** To Extent of Inventory

304ml cartridge
Ideal for movement and perimeters joints
Meets ASTM C920 S NS Class 50 NT M GA O
Meets AAMA 802 and 805 standards
Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
Excellent resistance to UVs for indoor and outdoor use

.......more details

2376.177.25.930

Whiting Torsion assembly .177 wire size 25" spring length 93" shaft

4580-304-PEBL/KAKI

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Pebble/Kaki 458-17 *** To Extent of Inventory

304ml cartridge
Ideal for movement and perimeters joints
Meets ASTM C920 S NS Class 50 NT M GA O
Meets AAMA 802 and 805 standards
Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
Excellent resistance to UVs for indoor and outdoor use

.......more details

O22R1104

AirLift Fitting Straight 3/8 x 1/8 NPT

10.1002.9

Truck Door Rivet Mild Steel 1/4 x 1-5/16 - 1/2 HD Sold per Unit

Standard rivet used for installing #77 lock
5 rivets are required to install the handle Sold separately

PRO-GH-30053E-LH

Micanan 3 HP 575V 3P Gearhead Operator NM ECB No Eyes Left Hand

External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation
Universal Right or Left Hand mount

.......more details

939C00010

Extension Spring Steel 1 pc Door 8x7 Hook End Special Order

For cantilever 1-pc door

O18R1003

AirLift Safety Eye Kit Telco

SP-LMHNTG

LiftMaster Rearview Parking Access Hang Tag 25/pkg Special Coded **Must provide FC & Start #

Rearview mirror hanger gives access to gated facilities complexes for cars trucks and other vehicles
Can be used for larger vehicles with higher cabs as vans various trucks
20-25 foot detection zone
Device is engineered for use with the LIftMaster LMSC1000 Long Range Vehicle Access-Card Reader
Simple transferrable item can be swapped out for rental cars different vans/trucks in a fleet dealer/loaner repair cars and more
Tags are sold in batches of 25. Your location may have a facility code. Check with your maintenance department or administrator if needed

.......more details

G-10X7-134-W

Thermal Window Clear 10" x 7" for 1-3/4" Garaga Door White

For 1-3/4" thick door

K18-10931

LiftMaster Compression Spring

Also known as: 187009 G187009 1810931 18-10931 18-7009

XBA4

NICE Indicator Lights for M3/M5BAR 13.1ft

The Apollo XBA4 is a 13.1 ft long line of indicator lights for the click fixture on the upper or lower side of the barrier arm of the M3BAR and M5BAR barrier gate openers.

26CW945255

Truck Door Intermediate Panel (15.5" x 98") Painted White for Whiting Dryfreight

These panels are 15.50" height x 98" width.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white

3BXT-RED

Replacement Button/Switch Only - Red

Replacement button for 3BXT

K77-16011

LiftMaster Hardware Kit for CPS N4

This is a replacement Sensor Hardware Kit only.

CGH103L5-LH

LiftMaster Gearhead w/ Brake and Carwash Mod. 1 HP 208/230/460V 3-Phase Logic 5 Left Hand

Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App.
Security+ 2.0®
Includes CPS-UN4

.25W8.2

Resistor 1/4 W 8.2K OHM

Dimensions (W X H X L) 6 X 15 X 3 CM

MI00018

Micanan Motor Pulley LD 4L 1.5" x 5/8" ID

Used on the motor shaft for a 4L v-belt.

10.1063.9

Whiting S.S Serrated Flange Lock Nut 1/4-20

10W8

Resistor 10W 8K OHM

PRO-GH-10081U-R

Micanan 1 HP 208V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

2376.177_25.900

Whiting Torsion assembly .177 wire size 25" spring length 90" shaft

AVP-1

Ace Type Keyswitch with Aluminum Mounting Plate

Zinc Alloy Die Casted housing and Cylindrical Chrome Plated
Tubular key with 2 keys
60 Combinations Available
Spring Return Type
Recommended for multiple dwellings
Contact ratings: 4 A 125V AC 2A 250V AC

.......more details

PRO-GH-7553U-RH

Micanan 3/4HP 575V 3P Gearhead Op. N1 Eyes Monitored ECB Right Hand

Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
External radio control terminal strip
Three button O/C/S control station Nema-1
Supplied with Nema-1 photocells
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

PRO-GH-5083U-R

Micanan 1/2HP 208V 3P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

2704.206_325

Whiting Roadside Torsion Spring 2-3/16" ID 32-1/2" Long

Torsion spring wire only
.206 wire size

PRO-J-10053-U-RH

Micanan 1HP 575V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

PRO-J-10053-U-LH

Micanan 1HP 575V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

.437-334-R

Cut-to-Length Torsion Spring .437 x 3-3/4" Right Hand Wound Red/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

.363-514-R

Cut-to-Length Torsion Spring .362 x 5-1/4" Right Hand Wound Green/White

Priced per inch - cones sold separately
For factory installed cones use part no. C-514-INSTALLED

.343-258-L

Cut-to-Length Torsion Spring .343 x 2-5/8" Left Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.319-514-L

Cut-to-Length Torsion Spring .319 x 5-1/4" Left Hand Wound Blue/Green

Priced per inch. Cones sold separatly.
For factory installed cones order part # C-514-Installed

.295-6-R

Cut-to-Length Torsion Spring .295 x 6" Right Hand Wound Blue

Priced per inch
For factory installed cones priced seperately - use part no. C-600-INSTALLED

PRO-GT-10053-U

Micanan 1HP 575V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-10081-U

Micanan 1HP 208V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GH-20053-PNL

Micanan 2 HP 575V 3P Gearhead Operator NO CONTROLS *** Price on Request

Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation
Universal Right or Left Hand mount

Installation manual Specification sheet

.205-3.5-10-LHW

Mini Storage Spring .205 x 3.5" x 10" long Left Hand

Examples of ends on mini storage springs

LB412-36SF

Steel Faced Laminated Bumper Black 12" x 36" 4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LVB630-11

Laminated Bumper Black 6" Projection Vertical Installation 30" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

2376.171_25.930

Whiting Torsion assembly .171 wire size 25" spring length 93" shaft

2806.139*170

Whiting .139 x 2-3/16 x 17" L Roadside with Cones

For Curbside order part # 2807.139.170

Q209

LiftMaster Gear Reducer Pulley K17-50223

DC-1000 1/2" ID

PRO-T-5011-R

Micanan 1/2HP 115V 1P Trolley Operator - Contactor

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models

MU22-2WIRE-U-GRY

Miller Edge MU22 2-Wire Universal Gray - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty