Devanco Canada - Get The Right Garage Door Opener‎ and Parts

2 relay logic module ideal for applications requiring sequencing of electric locking devices and automatic door activation.
Day/Night mode allows users to designate "secure" or "unsecure" access for controlled entry points.
Push plates with wireless transmitters can be programmed to operate during specific time periods.
Programmable transmitters per receiver: 75 (unlimited for universal timer)
Input: DRY contact
Temperature rating: -22 to 158F

.......more details

NEW-HAMP-XL

Garex Ready to Install Country Style Special Order

Insulated garage door designed to be energy efficient with R-16 thermal resistance value
With 11 vertical lines featured in the embossing adding a more contemporary touch
Door Thickness: 1 ¾" (4445 mm) / RSI 281 (R-16)

GALV-243-334-L

Cut-to-Length Torsion Spring .243 x 3-3/4" Left Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-334-INSTALLED

OSH-6532-M-N1-LH

Manaras Opera-SH 1/2HP 600V 3Ph Monitored w/ N1 Eyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation brake and a floor level engaging device
Clearence: side room required 16"

PRO-GH-10023U-L

Micanan 1 HP 230V 3P Gearhead Op. N1 Eyes Monitored ECB Left Hand

Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
External radio control terminal strip
Three button O/C/S control station Nema-1
Supplied with Nema-1 photocells
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

MD-00033

Roller Chain #60 10' per Pack

2110-643-UPS

Linear Snap Lock Assembly with Keys (2)

Fits HSLG GSLG-A Ups

MG00020

Micanan Flat Washer 1-1/16" ID x 1-3/4" OD

OSH-6214-M-N1-LH

Manaras Opera-SH 1 HP 240V 1 Ph Monitored w/N1 Eyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

TDC1222-18

Liftmaster Comm. 18FT Trolley Angle set (10-5818-P x 2) and #41 chain pack (TDC41-18) ***Actual length 251"***

Double Angle Rails for doors up to 18'6" high
Includes #41 chain pack

GALV-295-6-144-L

Torsion Spring .295 x 6" x 12ft LH Galvanized Blue

Wire size: .295
Inside diameter: 6"
Length: 12 ft
Galvanized Stenciled

GALV-375-334-144-L

Torsion Spring .375 x 3-3/4" x 12ft LH Galvanized Yellow/Green

Wire size: .375
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized

GALV-319-334-144-R

Torsion Spring .319 x 3-3/4" x 12ft RH Galvanized Blue/Green

Wire size: .319
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized

GALV-234-258-144-L

Galvanized Torsion Spring .234 x 2-5/8" x 12ft LH Blue/White

Wire size: .234
Inside diameter: 2-5/8"
Length: 12 ft

K23-3001

LiftMaster On/Off Switch 125/277VAC 20A

Also known as: G233001 233001 23-3001
For use with various LiftMaster® Commercial Gate Operators

2806.192.320

Whiting .192 x 2-3/16 x 32" Roadside with Cones

MOTOR271-WIRED

Manaras Electric Motor1/2HP 208/460V 3PH

This item is compatible with BRAKE011

2300-390

Linear Friction Disc 5.5 x 2.06 x .18 pair

2200-042

Linear Sprocket 48B15 1" Bore

9003-200-15-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle 2" Track Bolt On 15' Long - Black

Black rigid vinyl retainer with black flexible vinyl insert.
Reverse angle bolt-on vinyl retainer.
Bolts onto reverse angle steel jamb.

Drawing

26141

Doorlec Cam Shaft 9-1/4" x 5/8" (24 x 1.59cm)

Fits the older smaller boxes

31369

Doorlec Sprocket 60B12 1" Bore

2200-309

Linear Double Pulley 7" 5/8" Bore

GALV-225-258-L

Cut-to-Length Torsion Spring .225 x 2-5/8" LHW Galvanized Orange/Green Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-225-258-144-L

Torsion Spring .225 x 2-5/8" x 12ft LH Galvanized Orange/Green

Wire size: .225
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized

GALV-262-258-R

Cut-to-Length Torsion Spring .262 x 2-5/8" Right Hand Wound Galvanized Red/Yellow Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

K20-8100M-DC

LiftMaster Motor 1HP 90VDC 1PH

K20-8100M-DC is a 1HP Motor Replacement Kit (90VDC BM CF). For use with various LiftMaster® 1HP 1-Phase Commercial Door Operators and Gate Operator Systems

MA033

LiftMaster Hardware Kit Only for Articulating Arm ** Arm Not Included

Hardware kit for articulating arm models MA024 and MA034
Articulating arm hardware kit
Arm sold separately

OSH-6213-M-N1-LH

Manaras Opera-SH 3/4 HP 240V 1 Ph Monitored ECB w/N1 Photoeyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

SC-25X15-78-W

Thermal Window 25" x 15" for 7/8" thick Steel Craft Door White

For 7/8" thick door

18011

Doorlec Gearbox for TCBOD Barrier Gate

GDI-HB341

GDI Direct Drive & Jackshaft HAML-RBH-A830 Nema 4 To Accept 1-1/4" Shaft Non Monitored

Compact & Light Weight - Fast Installation
Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
Soft start soft stop

.......more details

GDI-HB340

GDI Direct Drive & Jackshaft HAML-RBH-A830 Nema 4 To Accept 1" Shaft Non Monitored

Compact & Light Weight - Fast Installation
Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
Soft start soft stop

.......more details

GDI-HB330

GDI Direct Drive & Jackshaft HAML-RBH-2030 Nema 1 To Accept 1" Shaft Non Monitored

Compact & Light Weight - Fast Installation
Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
Soft start soft stop

.......more details

OSH-6532-M-N1-RH

Manaras Opera-SH 1/2HP 600V 3Ph Monitored w/ N1 Eyes Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation brake and a floor level engaging device
Clearence: side room required 16"

LEVER001

Manaras Hoist Disconnect Lever

MGH 3-phase up to 1.5hp

111854.0005

Overhead Logic Board 575V 3Ph RSX/RHX

For RSX/RHX commercial ops. 575V

K74-39295-2

LiftMaster E-Box UL325 SL585

K74-39295-2MC is a Electrical Box Replacement Kit with UL325 Safety Standards and Compliance Regulations
For models SL585503UL SL585103UL

CBC14

Thimble 1/4" - 100 per pkg

2376.182.275.930

Whiting Torsion assembly .182 wire size 27-1/2" spring length 93" shaft

This is a full balancer assembly
Twin springs one road one curb with a shaft through it

69988.3072

Todco Original Bottom Seal Retainer Reefer Cut to Size ** Special Order Item Price by Quote Only

Fits Serial #30662431-1

ETBHW-311-3/4

Doorlec 3/4 HP 115V-1Ph Waterproof Trolley OP

ETBHW-311-1/2

Doorlec 1/2 HP 115V-1Ph Waterproof Trolley OP

EHJW-343-1/2

Doorlec Ind Jackshaft Op. Watertight ECB 1/2 HP 460V-3Ph

Heavy-Duty Industrial Operator with Waterproof Mod. for Sectional or Rolling Steel Doors
DC-2000 logic with adjustable Timer-To-Close Delay On Reverse and Traffic Light Control (monitored board optional)
Solenoid Brake prevents coasting and secures the door when closed
TEFC (sealed) continuous duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details

CAMPLATE012

Manaras Cam Plate MTH/MTBH N1

7176.218.33.96

Whiting Heavy Duty Torsion Assembly .218 x 35" shaft 96"

2376.192.34.930

Whiting Torsion assembly .192 wire size 34" spring length 93" shaft

This is a full balancer assembly
Twin springs one road one curb with a shaft through it

PRO-GH-30053E-LH

Micanan 3 HP 575V 3P Gearhead Operator NM ECB No Eyes Left Hand

External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation
Universal Right or Left Hand mount

.......more details

MH00002

Micanan Mild Steel Bushing 9/32" ID x 13/32" OD x 1-1/16" (Brake Option) *** No Longer Available

C-34X16-134-W-G/T

Thermal Window 34" x 16" for 1-3/4" Door White Frame Grey Tint Glass

For 1-3/4" thick door

EHJ-383-1

Doorlec Industrial Jackshaft Op. 1 HP 208V-3Ph

Heavy-Duty Industrial Operator for Sectional or Rolling Steel Doors
DC-2000 logic with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Solenoid Brake prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details

EHJ-321-3/4

Doorlec Industrial Jackshaft Op. 3/4 HP 230V-1Ph

Heavy-Duty Industrial Operator for Sectional or Rolling Steel Doors
DC-2000 logic with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Solenoid Brake prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details

K11-37823

LiftMaster Idler Shaft (1) SL595U

Fits SL595U

O02R9999

AirLift Air Opener Chain Kit

Kit includes: (2) aluminum collars with set screws (1) 11-tooth stainless steel sprocket w/keyway (1) chain guide roller kit complete (roller sleeve bolt nut) (1) WP chain complete w/turnbuckle (length 9' chain kit)

FH12-00128-00

Complete Adjustable Hinge Set Galvanized 3-PC ** Price by Quote

Upwardor hinge set

TCBOD-321

Doorlec Double Arm Barrier Gate 1/2HP 230-1

Max length of double arm barrier 18ft (5.5m)

VBELTBX32

Manaras VBelt BX Cogged For RTBH RTBHW/C

Fits models RTBH RTBHW/C

041-0041

LiftMaster Camera with Decorative Cover

Fits model 87504

2806.200.340

Whiting .200 x 2-3/16 x 34" Roadside with Cones

D-2-6-KA

Keyed Disconnect Device 6ft Cable Keyed Alike (Special Order)

Operated from the outside to disconnect the trolley for manual operation of the door
Must specify if keyed alike is required or keyed random will be shipped
Mounting plate dimensions: 2 1/2” x 1 3/32”

71-EB120

LiftMaster External Brake Solenoid 120V

Same as K71-EB120 71B120X

MQ00005

Micanan Spring Pin 3/16" x 1-1/2" Long GH

EHJ-311-1/2

Doorlec Industrial Jackshaft Op. 1/2 HP 115V-1Ph

Heavy-Duty Industrial Operator for Sectional or Rolling Steel Doors
DC-2000 logic with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Solenoid Brake prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details

041-0042

LiftMaster Wiring Harness Camera

Replacement wiring harness kit compatible with 85503 & 85503-267

CABLE_516SS-500

Cable 5/16" 7x19 500' Stainless Steel

19-80ML-NP

Master Link #80 Nickel Plated

For #80 chain

K94-32309

LiftMaster J2 Harness Assembly SL585 SL595

EHJW-383-3/4

Doorlec Ind Jackshaft Op. Watertight ECB 3/4 HP 208V-3Ph

Equipped with: 3-btn control Adjustable Automatic Friction Clutch Emergency Chain Hoist and Heavy-Duty Solenoid Brake.
With DC-2000 controller
Watertight and Dust Tight EEMAC Type 4/12

MK-00137

Micanan Transformer 600V-24V-100VA

MK-00666

Micanan RF Junction Connector for Antenna

PRO-J-10043-U-LH

Micanan 1HP 460V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

PRO-H-7583-U-RH

Micanan 3/4HP 208V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

PRO-HB-5081U-LH

Micanan 1/2HP 208V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

CP-MO-12-115/1

Lynx Electric Motor 1/2 HP 115V 1 Ph *** No Longer Available

Electric motor only

IRB-325-HD

EMX Industries Steel Protective Hoods Only Grey Powder Coat Set of 2

Protective Hoods for the Thru-Beam Photo Eye System (Item #IRB-325) by EMX
Easily installed using the existing mounting holes of the Photo Eye
Constructed of zinc plated steel
Grey powder-coated finish
9" x 3"

ME113-C7

Miller Edge PVC Mounting Channel Flat Sold by the Foot

EHJ-311-3/4

Doorlec Industrial Jackshaft Op. 3/4 HP 115V-1Ph

Heavy-Duty Industrial Operator for Sectional or Rolling Steel Doors
DC-2000 logic with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Solenoid Brake prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details

VERMONT-R16

Garex Ready to Install Door Special Order

R16 Insulation - Short Panel with vertical lines carriage style - Panel spacing does not allow for decorative handles - Decorative hinges can be used - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

.289_3-3/4"-LH

Torsion Spring .289 x 3-3/4" x 12ft LH

Wire size: .289
Inside diameter: 3-3/4"
Length: 12 ft

15-41B10G1

Sprocket 41B10T 3/4" Bore

Also known as: 15-41B10GXX 15-41B10G1 155010

P-0128/LH

Autogate Retro Bracket Left Handed System

This is needed to change over to their current motor

MGR20-Y-2U-PER-FT

Miller Edge Sensing Edge Round Yellow 2-Wire Universal Outlet Sold Per Foot

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
Non-monitored edge
Maximum length is 10ft (over 8ft requires LTL shipment at additional cost)

10.1063.9

Whiting S.S Serrated Flange Lock Nut 1/4-20

P-0129/RH

Autogate Retro Bracket Right Handed System

This is needed to change over to their current motor

C-24-12-2-BLK-TINT

Thermal Window 24"w x 12"h for 2" Door Black Tinted Grey Glass

For 2" thick door

ERM40600H00

NICE Era MH Tubular Motor 40Nm 14rpm 120/60 12'

There must be at least 0.4 m between the driven parts and any xed elements
If the cable is damaged the appliance must be scrapped. The power cable cannot be replaced

16-4L280

LiftMaster Vbelt 4L 28" **to extent of inventory

Compatible with LiftMaster® Model SW490GL Swing Gate Operators

GHX-6432-CONT-LH

Manaras Explosion Proof Gear Head 1/2HP 480V-3P Contactor Left Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings and NEMA 7/9 O/C/S push-button station

RA41-1

Aluminum Rail 41 ft

HAML-RCH-2030

GDI Direct Drive HC410 Nema 1 To Accept 1" Shaft; UL-325 Photo Eyes Extra


User Name:
Password:
Remember Me:

	Forgot your password
Request a Login