Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Long Range
27-20126

Truck Door Spring Spacer 33" long for Whiting Roll-Up Doors

  • Extruded PVC construction with zinc plated thrust washer.
  • Cross Reference: 2471
26-94523

Truck Door Intermediate Panel (13" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
26-40202

Truck Door Head Seal Retainer Only 96" Long for Roll-Up Doors

  • Retainer extrusion is constructed of high quality aluminum.
  • Panel mounted retainer
  • Cross Reference: T #69790 500000
26-40037

Truck Door Offset U-Channel Seal Retainer 96" Long for Whiting DryFreight Doors *** To extent of inventory

  • Aluminum extrusion construction.
  • Retainer is offset to allow header clearence with seal when door is in open position.
  • For use with offset bottom seal #26-40040
  • Cross Reference: W #8280
26-40018

Truck Door Bottom L-Retainer 84" Long for Todco Roll-Up Doors

  • Galvanized steel construction for extra strength and corrosion resistance.
  • Fits both standard and heavy-duty bottom seals.
  • Pre-punched holes for added convenience
  • Cross Reference: T #61191 W #4034 260000
26-14325

Truck Door Bottom Panel with Seal (15" x 98") for Todco DryFreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
  • Comes only with bottom retainer and seal (installed)
DM32-125

Cable Drum Standard Lift 32' 800-32 (1-1/4") Pair Torque Force

  • 32 ft Standard lift aluminum die cast alloy cable drums for 1-1/4" shaft.
  • Pair includes (1) LH & (1) RH. Color coded: Red=LH and Black=RH.
  • 3/8"-16 x 2" hardened cup point set screws installed with red heads.
  • Maximum Door Height: 32'-1".
  • Rated Lift per Drum: 1000 lbs.
  • Max Cable Diameter: 1/4".
    • .......more details
H11G10

Hinge #10 x 11 gauge

  • 11 gauge # 10 hinge - 0.92 lbs
  • Bright zinc-plated steel construction
  • For use with 7/16" stem rollers
H11G12

Hinge #12 x 11 gauge

  • 11 gauge # 12 hinge - 1.00 lbs
  • Bright zinc-plated steel construction
  • For use with 7/16" stem rollers
H11G08

Hinge #8 x 11 gauge

  • 11 gauge #8 hinge - 0.87 lbs
  • Bright zinc-plated steel construction
  • For use with 7/16" stem rollers
EP2982

Exhaust Port 4" with latch short barrel ** To Extent of Inventory

  • 4" inside diameter 1/4" sleeve with latch.
  • Includes fasteners & gaskets.
  • Polished aluminum finish.
CB18B0500

Cable 1/8" 7x19 500' Galvanized

  • Galvanized Cable 1/8" 7x19 500ft spool.
  • Cable break strength: 2000 lbs
Comparison charts
RS1039

Roller 3" Steel 9" stem 10 ball - To Extent of Inventory. Replaced by RS1039-C

  • Steel Roller Wheel diameter: 3"
  • Working length: 8.5"
  • Overall length: 9.64"
  • Box qty: 60 Box weight: 49.6 lbs (3-9-10 Steel)
RS1034

Roller 3" Steel 4" stem 10 ball

  • Steel Roller Wheel diameter: 3"
  • Working length: 3.38"
  • Overall length: 4.75"
  • Box qty: 50 Box weight: 35.8 lbs (3-4-10 Steel)
75LMC

LiftMaster Illumintaed Wall Button 2 wire Universal ** To Extent of Inventory

  • 2 wire wall button for all openers that will activate by connecting the two wires together.
25-10300

Truck Door Cable Anchor Bracket Zinc

  • Steel construction Zinc plated finish
  • Allows proper rotation of cable head
  • Cross Reference: T #61204 W #4004 240000
25-10275

Truck Door Universal End Hinge Flush Mount

  • Steel construction Zinc plated finish
  • Eliminates routing of panels for easier installation.
  • Removable cover allows roller change without hinge removal
  • Includes: Hinge roller cover & kep nuts
  • Cross Reference: H-325716
25-10113**DISC

Truck Door 2" Steel Roller Long Stem for Whiting Roll-Up Doors Use Part # 94-61180-33-84

  • Unplated shaft 10 roller ball design
  • Shaft Length: 6.5" Overall Length: 7.5"
  • Long stem roller has a staked collar design versus machined collar on others.
CUSTOM4X8PO

Devanco Loop 4'x8' rigid-pvc pave-over

  • Ideal for use on with gravel driveways or sufaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
2'6X6PO50

Devanco Loop 2'6 x 6' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or sufaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
6X24PO50

Devanco Loop 6' x 24' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
4X12PO50

Devanco Loop 4' x 12' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
1104-10FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 10' Long - White (W)

  • White rigid retainer with white flexible vinyl.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-8FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 8' Long - White (W)

  • White rigid retainer with white flexible vinyl.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
.207_2"-RH

Torsion Spring .207 x 2" x 12ft RH Brown

  • Wire size: .207
  • Inside diameter: 2"
  • Length: 12 ft
GALV-343-6-144-R

Torsion Spring .343 x 6" x 12ft RH Galvanized Blue/Red

  • Wire size: .343
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized
BPPVCT

Garex PVC White Transition Moulding 289" #3764

  • Universal garage door panel adapter molding
  • Use on any 1-3/4" door
  • Allows a Garex panel to be used as replacement on any brand door
  • 24' lengths only can be cut for transport
MB-03204

Micanan Electric Motor Only 1 HP 575V 3PH C-Flange TEFC 56C

  • Fits GT GH GHC & GSD
6X10PO50-RIGID

Devanco Loop 6' x 10' Rigid PVC pave-over 50' lead-in

  • Ideal for use on with gravel driveways or sufaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
761

Fasteners Flat Head Carriage Bolt 1/4-20 x 1-7/8" 1000/Box

  • Full length thread
  • Max torque = 6
MOD060-12FT-MAX

Manaras Auxiliary Trolley #41 Chain Modification Only

  • Provides drawbar operation of a standard lift door with the use of a jackshaft operator
  • Includes tracks for doors up to 12' high. Additional fee for over 12'
  • Maximum door width 22'
28-02201

Truck Door 2" Vertical Track & Right Angle Assembly 106.5" Curbside (RH) for Whiting Roll-Up Doors

  • SPECS: Length: 106.5" Fits door sizes: 91" - 100" high
  • Assembly includes: Right angle mounting track Vertical track and Torsion bracket
  • Cross Reference: W #2275-1
  • Galvanized steel 14 gauge construction
  • Tongue and groove for proper alignment at joints
4170015

FAAC 400 End Cap for Cover

17JW

Rolling Steel 2" Flat Cast Windlock

  • Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
  • A wind lock is a small metal device that is attached to each slat.
  • Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
  • When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
  • With a windlock your door can operate efficiently despite wind load or pressure.
  • Windlocks are easy to add on to any existing rolling steel or shutter door
    • .......more details
O02R9208

AirLift Top Cap Brass Nut w/Rod Seals

PRO-T-7553-U

Micanan 3/4HP 575V 3P Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 HP models
  • Monitored board
.192-134-R

Cut-to-Length Torsion Spring .192 x 1-3/4" Right Hand Wound Silver

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
G65_18300

LiftMaster Thermostat Control Heater Fin Type for 115V & 575V Gate Operators

  • Heater used in BG type gate operators
Installation Manual
MK00709

Micanan Varistor Harness 460V with Red Wires

1104-16FT-BROWN

Residential Side & Top PVC Weather-Strip with cap 16' Long - Brown (N)

  • Brown rigid vinyl retainer with brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
MGR20-Y-2R-04

Miller Edge Sensing Edge Round Yellow 2-Wire Right Hand Outlet 4ft Long

  • Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
SLT4-18

Rolling Steel 3" Crowned Slat 18-ga Galvanized

MK-00044

Micanan Overload Reset 1-Phase 17 Amps

33106

Overload 5.50 to 8.50A

MINI-218-3-10-RH-W

Mini Storage Spring .218 x 3" x 10" RH Wagner End ***Price on Request

  • Special Order. Price valid on in stock springs only
SOLID_SHAFT_20'

Solid Shaft 1" Keyed 20 ft Galvanized

  • Actual length is approx. 20'-1"
14-1056

PVC Roll 12" x .120" x 200ft Roll Low Temp Smooth for Replacement Strip Curtain

  • Clear and smooth. Suitable for most average applications.
  • Temperature Range: -34° C to 65° C).
  • Formulated with ingredients that meet USDA requirements for incidental food contact.
OHJ-6112-ECB

Manaras Heavy-Duty Jackshaft Operator 1/2 HP 120V 1Ph with Elect. Circuit Board

  • 25 cycles per hour 100 cycles per day
  • An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
  • Specifically designed to motorize grills when a manual egress is required
  • Mechanical brake
  • Hoist on right standard
  • Full overload protection
    • .......more details
Installation ManualSell Sheet
26-94322

Truck Door Bottom Panel with Seal (12" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
  • Comes only with bottom retainer and seal (installed)
MS-00006

Micanan Trolley Track Set 12 Ga. 16'6" (for 14' h. door) Includes 2 Angles Only

  • Set includes 2 tracks only
  • Chain NOT included
87-P-062

LiftMaster Push Ring Fastener 5/8" Int

  • Same as: 87P062 K87-P-62 87-P-062
  • Used on LiftMaster brake assembly
K72-34818

LiftMaster Limit Shaft Kit SL575/585

  • Complete with: Limit Shaft Limit Nuts Limit Bearings Limit Sprocket Shim Washers Compression Ring Roll Pin and E-Ring.
OPH-6212-M-N1-RH

Manaras Opera-H 1/2HP 240V 1Ph with Monitored Board and N1 Photoeyes

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
  • 25 cycles per hour 100 cycles per day
    • .......more details
RADIO-37

Manaras MCR-32 Open/Stop/Close 24V receiver Nema 1 313 MHz ** To extent of Inventory

  • 3-Channel O/C/S receiver controls one operator with MCT series transmitters.
  • Steel Nema 1 enclosure.
  • 24 VAC input voltage.
  • 2 N/O and one N/C relay
  • Commercial antenna Included (Radio029).
  • Replaced by RADIO-RE900A
    • .......more details
Programming Instructions - ECBProgramming Instructions - CONT
BK258/PR

End Plate 2-5/8" flanged with bearing 13GA Sold as a Pair (L & R) (EBF 258)

  • Sold as a pair
  • Box quantity: 30
ME00003

Micanan Clutch Shaft Only for Pro-T/TB 3/4" x 11-3/4" No Kw 1" Thread

SPREADER002

Chain Tensioner for 1" / 1-1/4"

  • Chain spreader for installation with 1" operator shaft and 1-1/4" door shaft
  • Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing
Installation instructions
.273_1-3/4"-LH

Torsion Spring .273 x 1-3/4" x 12ft LH Orange/Red

  • Wire size: .273
  • Inside diameter: 1-3/4"
  • Length: 12 ft
GALV-234-258-R

Cut-to-Length Torsion Spring .234 x 2-5/8" Right Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
LB412-18SF

Steel Faced Laminated Bumper Black 12" x 18" 4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
41D7570

LiftMaster Light Lens (41D7572)

  • Also known as 041D7572 41D7571 41D7570 41D7572 041D7571 041D7570 041-0144
41A5507-B

LiftMaster Receiver Logic Board for 2500 (390 Mhz) ** Discontinued

  • With end-panel
  • Also known as 41A5507 41A5507B
HAE00032

Linear 8ft Chain Assembly (HCT8)

K77-36541

LiftMaster Antenna

  • For various gate operators
CP-LX-KEYPAD

Lynx Wireless Commercial Op. Keyless Entry 372MHz

  • Illuminated Keypad
  • Weather shutter protects keypad from elements
  • Wireless Installation
  • 4 digit codes for maximum security
  • Allows for access without remote or keys
  • For use with any UL325 commercial operator that has an LX100 or LX900 board
    • .......more details
Programming instructions
OSH-6212-ECB-LH

Manaras Opera-SH 1/2 HP 240V 1Ph with Electronic Circuit Board Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
Installation Manual
T-931-H

FL-Heddolf 1-btn Transmitter P220-1K-311 MHz **this model is discontinued

  • Open/Close remote for 1 door
  • Dip switch led 9V battery and metal clip
  • Compatible with Allstar 1 button T-931 and T-931-M
  • New style transmitter case
2BXL

Control Station Exterior Surface Mount O/C N4 with Key Lockout

  • OPEN-CLOSE Push Button with Lockout
  • Metal Enclosure
  • Buttons aligned vertically H=4-3/8"" W=4-1/8"" D=2-5/8""
Installation Manual 2BXL
NIR-HD

EMX Industries NIR Hood Cover Steel

  • The hood keeps rain and other debris from distorting or blocking the photo beam.
  • It also helps to keep the sun from glaring off the reflector and disturbing the beam's reflection.
  • Replaces the mounting bracket that comes with the sensor.
  • Comes with Hood two sets of nuts and bolts and a plug
.295-134-R-C

Cut-to-Length Torsion Spring .295 x 1-3/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
OTBH-6433-1-ECB

Manaras Trolley Operator 3/4 HP 480V 3 Ph with Electronic Circuit Board

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
Installation ManualSell Sheet
4002-6FT

45 Degree Aluminum Retainer for Light Brush 6' Long 45 degree

  • For angle application (45 degree)
  • For use with Light Brush or Vinyl Insert.
K75-10406

LiftMaster Drive Chain Connector Link Kit APT

  • Also known as: 30515363 305105363
MP-00010-U

Micanan Auxiliary Limit Switch for Monitored ECB

  • Installed to control auxiliary device
.393_6"-LH

Torsion Spring .393 x 6" x 12ft LH Orange

  • Wire size: .393
  • Inside diameter: 6"
  • Length: 12 ft
PRO-HB-7525U-RH

Micanan 3/4HP 220V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake included
RELAY039

Manaras Relay 3-Pole 24VAC

WG-305

Devanco White Lithium Grease

  • Provides long lasting lubrication and protection against rust and corrosion
  • Ideal for metal to metal applications
  • Sprays on thick providing a long-lasting protective coating that won't run off
Material Safety Data SheetFiche Signalétique
.273-2-5/8-LH-C

Torsion Spring .273 x 2-5/8" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .273 ID: 2-5/8" Length: 12 ft
L504AL

LiftMaster Monitored Large Profile Resistive Edge w/ Aluminum Channel 4ft

27-20300

Truck Door Cable Drum Roadside (LH) for Todco Roll-Up Doors

  • Cast aluminum construction
  • Large die cast cable drums are grooved to prevent cables from binding or wearing prematurely.
  • Angle of cable slot determines left or right drum.
  • Holds up to 130" door cable
  • Cross Reference: T #59033-2 T #59129-2 W #4014 330000
41D8181

LiftMaster Cover

MP-00077

Micanan Heavy Duty Front Idler (Trolley End Bracket) #41 w/Pillow Blocks

10BOX45RNDSM

4.5" Round Surface Mount Box

  • 4.5 inch round surface-mount box for 4.5 inch round push plates.
1104-8FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 8' Long - Cream (C)

  • Cream rigid vinyl retainer with cream flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Almond
38476R

Genie Master Belt Drive Rail Extension Kit for 8ft Doors

  • The Genie Master Belt Drive Extension Kit is an extension for C-channel and T-type rails to be used in addition to the 7 ft. (3-piece) rail to accommodate an 8 ft. high door.
  • The extension kit is designed specifically for Genie belt drive openers.
  • Belt and instructions included
  • Compatible Genie SilentMax 1200 SilentMax 1000 QuietLift 800 and BeltLift
CB332A0500

Cable 3/32" 7x7 500' Galvanized

  • Galvanized cable 3/32" 7x7 500ft spool.
  • Cable break strength: 920 lbs.
Comparison charts
CBB18

Stop & Sleeve 1/8" 100 pair

  • Includes 100 stops and 100 oval sleeves
5001-WG-9-MOAK

Residential Side & Top Weather-Strip 9' Long Wood Grain Medium Oak with Screws

  • PVC wrapped
  • Painted aluminum retainer
  • Dual fin vinyl
  • Painted screws to match. 1 screw per foot
  • Sold by full case quantity (20)
K001A5251-4

LiftMaster LGO Replacement Board 315 MHz **DISCONTINUED

41A3150

LiftMaster Terminal Block with Screws

  • For model 8355
  • Same as 041A3150
22-002641

Ratchet Bar Only for Holdown Assembly ** Price by Quote Only

  • Ratchet bar only for the ratchet assembly#22-003769-1
PRO-GH-10053U-L

Micanan 1 HP 575V 3P Gearhead Op. N1 Eyes Monitored ECB Left Hand

  • Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
  • Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
  • External radio control terminal strip
  • Three button O/C/S control station Nema-1
  • Supplied with Nema-1 photocells
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
7001-7-BROWN

Commercial Side & Top Weather-Strip 7' Long - Commercial Brown (DN)

  • Brown galvanized steel with brown dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
OTBH-6234-1M00

Manaras Trolley Operator 1 HP 208V 3 Ph monitored w/N1 Eyes

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
OPH-6532-0M00

Manaras Opera-H 1/2HP 600V 3Ph Monitored ECB and N1 Photoeyes Right Hand

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
111859.0001.S

Genie / OHD Shaft Assembly HXH/RHX-Hoist *** Price by Quote

MT21-GRAY-LH

Miller Edge 2-Wire Pressure Sensitive Edge Gray Left Hand Outlet Sold per Foot

  • Electromechanical medium profile edge for rolling fire door applications. •Touch sensitive signaling allows for immediate reversing or stopping of motion. •The MT21 is completely felixible and will contour to curved surfaces. The MT21 will also act as weatherstrip. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
TXTA-KYPD

Pulse Universal Wireless Keypad

  • Programmable 4-digit code for continuous use.
  • Programmable TEMPORARY 4-digit code for programmable number of uses.
  • Multi-Brand Adaptable: Works with all Pulse receivers LM receivers (GreenOrange Red Purple and Yellow learning codes) and other receivers with 315MHz or 390MHz.
  • Powered by 9V battery. (One included in package)
TXTA-200

Pulse 3-BTN Transmitter 315MHZ

  • Three-Button Transmitter: Can be programmed to operate with up to three different receivers to operate up to three doors or for Open Close and/or Stop functions
  • 315mHz: Works with RXTA-100 and RXTA-200 or as replacement unit for other LM receivers with 315MHz frequency.
  • Provided with visor clip for forklifts and trucks.
  • FCC Approved