Devanco Canada - Get The Right Garage Door Opener‎ and Parts

MG00021

Micanan Flat Washer 7/8" ID x 1-1/8" OD

OSH-6112-CONT-R

Manaras Opera-SH 1/2HP 120V 1Ph Contactor Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"

Installation Manual Sell Sheet

26-942255

Truck Door Bottom Panel with Hardware (15.5" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Primer Finish
Comes with 18" pull strap assembly two bottom roller shaft covers and stud plates standard lift handle two u-bolts flexible PVC bottom seal and aluminum seal retainer.

.......more details

MM00011

Micanan Brake Solenoid Cover

MGH-6113-ECB-RH

Manaras 3/4 HP 120V 1P Jackshaft with Elect. Circuit Board Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

Installation Manual Sell Sheet

CPT210-C3

Miller Edge PVC Mounting Channel "L" Shape Sold by the Foot *** Disc. Repl by ME210-C3

Used on CPT-210 extrusion

CPT-210-K5

Miller Edge Non-Monitored End Plug Kit *** Discontinued

For use with CPT-210-50 bulk extrusion
Kit includes: 5 wired 5 non-wired end-plugs 1oz tube of adhesive

CPT-210-50

Miller Edge Bulk Extrusion 50 ft Roll

For do-it-yourself edges on sectional or rolling doors.
Black
End plugs adhesive and mounting channel sold separately.
Sensing edge size: 1-5/8"H x 1-3/4"W
When combined with the ME123 mounting channel it can be installed on doors measuring 1-1/2" to 2" thick.

Installation Manual Sell Sheet

7001-WG-16-MO

Residential Wood Grain Side & Top W/S Medium Oak 16' Long - Painted Screws to Match

Medium Oak retainer with Medium Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

7001-WG-9-DO

Residential Wood Grain Side & Top W/S Dark Oak 9' Long - Painted Screws to Match

Dark Oak retainer with Dark Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

7001-WG-10-CO

Residential Wood Grain Side & Top W/S Cherry Oak 10' Long - Painted Screws to Match

Cherry Oak retainer with Cherry Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

7001-WG-16-CO

Residential Wood Grain Side & Top W/S Cherry Oak 16' Long - Painted Screws to Match

Cherry Oak retainer with Cherry Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

7001-WG-7-CO

Residential Wood Grain Side & Top W/S Cherry Oak 7' Long - Painted Screws to Match

Cherry Oak retainer with Cherry Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

7001-WG-8-CO

Residential Wood Grain Side & Top W/S Cherry Oak 8' Long - Painted Screws to Match

Cherry Oak retainer with Cherry Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

1013-1-1/4-10

Rigid Vinyl Bottom Retainer L-Shaped 10' Long

For door thickness: 1-1/4"

MK-00061

Micanan Time Delay on Reverse 1.5 sec. 24/110V

In closing cycle door will stop for 1.5 seconds and reverse to fully open

157371

Decorative Pull Handle Yorktown Style 11-1/4" Stamped Steel Sold per piece

Black Stamped Steel
Also known as Spade Style
Mounting hardware sold separately
Priced per each

26CW94322

Truck Door Bottom Panel with Seal (12" x 98") Painted White for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white
Comes only with bottom retainer and seal (installed)

.......more details

TC134-16

Top Cap 1-3/4" 16 ft Black Box Qty Only ** To extent of Inventory

Sold in box quantities only
12 pieces per box

TC134-9

Top Cap 1-3/4" 9 ft Black Box Qty Only ** To extent of Inventory

Sold in box quantities only
12 pieces per box

TC134-12

Top Cap 1-3/4" 12 ft Black Box Qty Only ** To extent of Inventory

Sold in box quantities only
12 pieces per box

TC134-14

Top Cap 1-3/4" 14 ft Black Box Qty Only ** To extent of Inventory

Sold in box quantities only
12 pieces per box

71-B3PH

LiftMaster Internal Brake Kit w/Solenoid 208V/230V 3PH for L5 Operators

Works with Logic 5 commercial operators and SL585/SL595 U and UL gate operators

MK-00098

Micanan Boot for Cut-Out Switch

OPH-6112-CONT-L

Manaras Opera-H 1/2HP 120V 1Ph with Mechanical Contactor Left Hand

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"
25 cycles per hour 100 cycles per day

.......more details

Installation Manual Sell Sheet

CB5320500-KOR

Cable 5/32" 7x19 500' Galvanized Supreme

Galvanized cable 5/32" 7x19 500ft spool.
Cable break strength: 2800 lbs
A higher quality cable compared to the Chinese cable.
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

Comparison charts

ZT35081029

Firestar Fire Door No. 2 Slat 22-GA White

.295-134-R

Cut-to-Length Torsion Spring .295 x 1-3/4" Right Hand Wound Blue

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

MB-01102

Micanan Electric Motor Only 1/2HP 230/460V 3PH

Base Mount motor O.D.P. FR56
Used on Micanan's T TB APT J EJ H EHJ HHD & SD

K20-1050B-2LP

LiftMaster Electric Motor 1/2 HP 115/230V 1Ph L3 L4 ***NLA*** replaced by: K20-1050B-2LP-H24

Standard 1/2 hp motor

1104-ASFT-16FT

Elton Aluminum Stiffener for 1104 16ft

Prevents the 1104 from buckling in the hot sun

1104-ASFT-7FT

Elton Aluminum Stiffener for 1104 7ft

Prevents the 1104 from buckling in the hot sun

25-4003-K

LiftMaster 2.6-3.7 Amp Overload Fuse

For models: SL595-200-53

68-9E

Wheel Chock 68-9E Pyramid Rubber with Eye Hook

Handles for chain fastening
Long Lasting 80 Durometer rubber
Size: 8" wide x 9" long x 6" high

26-40029

Truck Door U-Channel Seal Retainer 98" Long for Whiting DryFreight Doors ** To Extent of Inventory

Aluminum extrusion construction
For use with Bottom Seal #26-40027

MAW123-BLK-LH

Miller Edge Air-Wave Edge Black Sold per Foot

This pressure sensitive air-wave edge can be adapted to suit a wide variety of applications.
When touch activated the MAW123 sends an immediate pulse of air through the extrusion to an air-wave switch which sends a signal to controls to stop and/or reverse operations.
It has been designed to fit most doors with double track bottom retainers.
With appropriate mounting channel this edge will fit nearly all doors from 11/2" to 2" thick.
The MAW123 is resistant to flame water and most common greases and oils.

HSCFV112

Hinge Full Vision Hinge Clopay Style "B" 12-ga Stainless Steel *** NLA

Manufactured with Heavy Duty 12ga. Rust-Resistant 304 Stainless Steel
Laser Cut for a Clean Finish
For Use on Clopay Brand Full Vision Products

MH00001

Micanan Bronze T-Bushing 3/8" ID

2 required per operator

50346

Doorlec Electric Switch and housing for Mechanical Edge

10-1000-14FT

Strip Curtain 14' x 48" Angle Mount - 8" LT PVC - 4" O.L Clear

14 ft wide x 48" high
Mounting bar sold separately

97-75004

DOT-C2 Reflective Tape 150 ft x 2" W 11" White x 7" Red Pattern

DOT-C2 certified exceeds NHTSA requirements
Highly reflective even up to a 90 degree angle
Quick and easy to apply

4011-6FT

Aluminum Retainer only for Light Brush or Vinyl Insert 6' Long 90 degree ** To extent of Inventory. *** Sold in 12ft Lengths Only

For angle application - 90 degree
For use with Light Brush or Vinyl Insert.
For applications that require both brush and vinyl

GH4416-04-R

Green Hinge #4 12-ga Right Hand *** to extent of inventory

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

GH4416-02-R

Green Hinge #2 12-ga Right Hand *** No longer available

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

COUPLING002

Manaras Disconnect Coupling for MJH ** NLA Sold in Kit only** Use MOUNTSHAFT010 or 010A **

If MJH is manufactured prior to 1998 4 x PIN016 are required
If MJH is manufactured after 1998 2 x PIN016 are required
PIN016 sold separately

IG2-B1

Miller Edge Protective Boot Covering for IG2 Eyes Sold as a Pair

737

Fasteners Round Head Carriage Bolt 3/8-16 x 3/4" 1000/Box

Gr. 5 Zinc

IG2-P1

Miller Edge Pair of Pedestal Mounts for IG2 Eyes

Flexible spring loaded pedestal stand
30 degree of flex
27" high from bottom base to photoeye

RS10311

Roller 3" Steel 11" stem 10 ball

Steel Roller Wheel diameter: 3"

IG2-K10-30

Invisi-Guard-2 Photo Eye Kit 30ft Battery Powered *** Discontinued

The Invisi-Guard-2 thru beam photo optic system sends an invisible beam of light from a transmitting unit to a receiving unit.
The light beam is intended to function as a protective line guarding a potentially hazardous zone.
When the light beam is interrupted by an obstruction a signal is sent to the motor controls to stop or reverse motion
Universal Design Works with Pre and Post 2010 Operators
Spans Distances up to 30 feet (model dependent)
Time Saving Installation

.......more details

Installation Manual Sell Sheet

1104-8'-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 8' Long - Dark Sandstone (DDG)

Garaga dark sandstone rigid vinyl retainer with Garaga dark sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

9372054125

Square Torsion Spring .343 x 5-1/4 x 41.25" with Cones LHW

41.25" long = 160 coils

27-48-400

Extension Spring 8' Door - 400 lbs Tan

Single - Loop
27" long 48" stretch 400 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-48-280

Extension Spring 8' Door - 280 lbs Gold

Single - Loop
27" long 48" stretch 280 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-48-220

Extension Spring 8' Door - 220 lbs Green with clip

Single - Loop
27" long 48" stretch 220 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-48-170

Extension Spring 8' Door - 170 lbs Orange

Single - Loop
27" long 48" stretch 170 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-48-140

Extension Spring 8' Door - 140 lbs Blue

Single - Loop
27" long 48" stretch 140 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

502-0022

Reversing Edge BEP 100C Air Tube 4" from End Edge Length 93.5"

27-48-100

Extension Spring 8' Door - 100 lbs Tan

Single - Loop
27" long 48" stretch 100 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

H12G06-SS

Hinge #6 x 12 gauge Stainless Steel **NLA

Manufactured with 12ga. Rust-Resistant Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

K94-36408-1

LiftMaster Reset Switch LA500 with ID Resistor

For use with LiftMaster LA500 Series swing gate operators
Includes ID resistor kit
Includes LA500 product ID

MP00021

Micanan Up-Charge Track and #410 (#48) chain for 24' h Door *Actual length 318"*

For 1/3 HP and 1/2 HP operators only

MP00015

Micanan Up-Charge Track and #410 (#48) chain for 16' h Door *Actual length 222"*

For 1/3 HP and 1/2 HP operators only

MP00020

Micanan Up-Charge Track and #41 chain for 20' h Door *Actual length 270"*

For 3/4 HP and 1 HP operators only

MP00018

Micanan Up-Charge Track and #41 chain for 18' h Door *Actual length 246"*

For 3/4 HP and 1 HP operators only

SL18-ZP-COPPER

Zinc Plated Copper Sleeve 1/8" 100 Sleeves per Pkg *price on request

Oval sleeves ONLY
Stops sold separately part # ST18COP. Stops are not zinc plated

PRO-HB5011R-RH

Micanan 1/2HP 115V 1P Hoist Operator with Brake and Mechanical Contactor Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Includes solenoid brake

Installation manual Specification sheet

PD180CBT30MU

Carlo Gavazzi Photoelectric Through-Beam Emitter 30M

Emitter only. If receiver is required order PD180CBT30Q
For Industrial doors and Gates
Range: 30M
Relay output
Supply voltage emitter: 2 x 3.6VDC lithium batteries
Dimensions: 180m x 51 x 49m

.......more details

Installation Manual

39-10167

LiftMaster Clutch Disc for Liftmaster Commercial Operators with clutch

3-15/16" Diameter
3/4" Center
0.125" Thickness.
works with :MH MHS MJ H BH RBH J DJ SD MT BMT T APT

K75-12492

LiftMaster Brake Kit 115V Units MH

PRO-LH-5021U-LH

Micanan 1/2HP 230V 1P Medium-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (PRO LHE) *** INDEF Delivery

Designed for use on commercial sectional doors with high or vertical lift
May also be used on small rolling grilles with max. 15 cycles per hour
Includes chain hoist
Includes solenoid brake
On board receiver with antenna
On-Board receiver holds up to 20 transmitters

.......more details

Installation manual Specification sheet

PRO-LH-5011U-LH

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

Designed for use on commercial sectional doors with high or vertical lift
May also be used on small rolling grilles with max. 15 cycles per hour
Includes chain hoist
Includes solenoid brake
On board 372 MHz receiver with antenna
On-Board receiver holds up to 20 transmitters

.......more details

Installation manual Specification sheet

PRO-HBH-7511U-L

Micanan 3/4HP 115V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

3/4 HP115V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

HTRKITRSL

LiftMaster Self-Regulating Heater and Coil for RSL12V ** DISCONTINUED

Protects system to -40F.
Installs into the operator frame

M005

Rolling Steel Groove Mouth GM6789 Fire Door

616001404

Rolling Steel 900 Series Guide Channel Sold per Foot

Assemblies of strucural steel angles bolted to the wall supporting the entire weight of the door.

271723

Rolling Steel Slide Bolts for Bottom Bar D679

285547

Rolling Steel Aluminum Transition Piece Sold per Foot

B119

Rolling Steel Fire Door Bottom Bar Slotted Angles Sold per Foot

14FW

Rolling Steel 3" Filler Endlock for Continuous

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks