Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Long Range
41C2735

LiftMaster Chain and Cable Assembly CMC84

  • Fits a Sears Craftman CMC84 operator
510.5377.00

Whiting Side Seal Option for Dry Freight Door

  • A extra option when ordering a Dry Freight door
  • When purchased alone use part number 5377.115
M3-3313

Marantec 3-Button Transmitter 315 MHz 97245 ** Discontinued

  • Same as part # 65894 97245
  • Includes battery CR2032
  • Made in Germany
Instructions
BK000-B

Residential Top Roller Bracket Adjustable 2-Bolt Sold per Piece

  • Sold per piece - not sold as a pair
  • Meant for 2" hardware
13-3510*

LiftMaster Chain Guide ***NLA

  • This is NLA as a part by itself but may be purchased in a kit K75-18493
029-98290

W-Style Replacement Door White Stainless Steel Package 029-98290

  • Replacement door size between 96-1/4" - 98" wide x 72-90" high
  • Painted white
  • Stainless steel package
41B7611

LiftMaster Filter Board w/Screws **to extent of inventory

  • For model: 8550
RESET003

Manaras Resettable Overload Fuse 6A 1 Phase

ME00057

Micanan Clutch Shaft Only for PRO-APT 3/4" x 12-3/4"

  • For model PRO-APT
MI00007

Micanan Front Idler Assembly for PRO-APT/T

  • For model PRO-APT / T
  • 3/4" x 5.79" LG
86-CP05-108

LiftMaster Cotter Pin 5/32" x 1-1/2"

GREASE

Gear and Rail Grease 3/4 oz Tube *** No Longer Available

  • A low temperature lithium based grease
  • To avoid tooth wear premature failure and temperature rise caused by friction by promoting sliding between teeth
.234-258-R

Cut-to-Length Torsion Spring .234 x 2-5/8" Right Hand Wound Blue/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.225-258-R

Cut-to-Length Torsion Spring .225 x 2-5/8" Right Hand Wound Orange/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.207-258-L

Cut-to-Length Torsion Spring .207 x 2-5/8" Left Hand Wound Brown

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
C-200-INSTALLED

Cones 2" Factory Installed (Pair)

  • For do-it-yourself installation use part no. SF200
.273-2-L

Cut-to-Length Torsion Spring .273 x 2" Left Hand Wound Orange/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.273-2-R

Cut-to-Length Torsion Spring .273 x 2" Right Hand Wound Orange/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
41A7562

LiftMaster Light Lens for 8360 8550 8355

  • Replacement light lens
.262-134-R

Cut-to-Length Torsion Spring .262 x 1-3/4" Right Hand Wound Red/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.225-134-R

Cut-to-Length Torsion Spring .225 x 1-3/4" Right Hand Wound Orange/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
107999.0001.S

Genie Motor Pulley for Overhead JST

7001-12-W/B

Commercial Side & Top Weather-Strip 12' Long - White and Black (WB)

  • White galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
10FT-RAIL-BELT

LiftMaster 10' belt drive rail 2770BD - colour code: Blue

  • Price reflects cost if purchased with an opener
ME123-BLK-U

Miller Edge Black Universal Outlet 2 -Wire 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualWorksheetSell Sheet
.421_6"-LH

Torsion Spring .421 x 6" x 12ft LH Gold

  • Wire size: .421
  • Inside diameter: 6"
  • Length: 12 ft
.312_6"-LH

Torsion Spring .312 x 6" x 12ft LH Yellow

  • Wire size: .312
  • Inside diameter: 6"
  • Length: 12 ft
.468_5-1/4"-LH

Torsion Spring .468 x 5-1/4" x 12ft LH Blue/Orange **NLA

  • Wire size: .468
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.283_5-1/4"-LH

Torsion Spring .283 x 5-1/4" x 12ft LH White

  • Wire size: .283
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.437_3-3/4"-LH

Torsion Spring .437 x 3-3/4" x 12ft LH Red/Green

  • Wire size: .437
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.331_3-3/4"-LH

Torsion Spring .331 x 3-3/4" x 12ft LH Red/White

  • Wire size: .331
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.262_3-3/4"-LH

Torsion Spring .262 x 3-3/4" x 12ft LH Red/Yellow

  • Wire size: .262
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.207_2-5/8"-LH

Torsion Spring .207 x 2-5/8" x 12ft LH Brown

  • Wire size: .207
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.283_2"-LH

Torsion Spring .283 x 2" x 12ft LH White

  • Wire size: .283
  • Inside diameter: 2"
  • Length: 12 ft
.234_2"-LH

Torsion Spring .234 x 2" x 12ft LH Blue/White

  • Wire size: .234
  • Inside diameter: 2"
  • Length: 12 ft
.234_1-3/4"-LH

Torsion Spring .234 x 1-3/4" x 12ft LH Blue/White

  • Wire size: .234
  • Inside diameter: 1-3/4"
  • Length: 12 ft
71-B240H

LiftMaster Interior Brake Kit with Cable 230-460V (Logic 3 4 and early 5 Disc and Pad Models)

  • Interior mount brake kit for operation with chain hoist
Instruction Manual
41AC050-1M

LiftMaster Electronic Circuit Board Assembly

  • Assembly includes: circuit board end panel and light socket
  • For chain drive units with one light
  • Fits 3245 & 3255
  • Also known as 41AC050-1 041AC050-1M
K001A6424-2

LiftMaster Circuit Board Assembly Kit 2008 315 MHz *** No longer available

  • Replacement circuit board for Medium-Duty Logic Commercial Operators
  • Used on models MJ MH MHS MT BMT and MGJ (non- UL325 compliant operators)
  • 315 MHz intergral radio receiver accepts 20 Sec+ remotes or unlimited dip switch
Installation Manual
23-2017

LiftMaster Limit Switch SPDT

30B363

Capacitor Motor Start 53 uF - 64 uF 220V *** No Longer Available

.375_6"-RH

Torsion Spring .375 x 6" x 12ft RH Yellow/Green

  • Wire size: .375
  • Inside diameter: 6"
  • Length: 12 ft
.283_5-1/4"-RH

Torsion Spring .283 x 5-1/4" x 12ft RH White

  • Wire size: .283
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.250_2-5/8"-RH

Torsion Spring .250 x 2-5/8" x 12ft RH Green

  • Wire size: .250
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.250_2"-RH

Torsion Spring .250 x 2" x 12ft RH Green

  • Wire size: .250
  • Inside diameter: 2"
  • Length: 12 ft
.262_2"-RH

Torsion Spring .262 x 2" x 12ft RH Red/Yellow

  • Wire size: .262
  • Inside diameter: 2"
  • Length: 12 ft
.192_2"-RH

Torsion Spring .192 x 2" x 12ft RH Silver

  • Wire size: .192
  • Inside diameter: 2"
  • Length: 12 ft
.283_1-3/4"-RH

Torsion Spring .283 x 1-3/4" x 12ft RH White

  • Wire size: .283
  • Inside diameter: 1-3/4"
  • Length: 12 ft
.273_1-3/4"-RH

Torsion Spring .273 x 1-3/4" x 12ft RH Orange/Red

  • Wire size: .273
  • Inside diameter: 1-3/4"
  • Length: 12 ft
.250_1-3/4"-RH

Torsion Spring .250 x 1-3/4" x 12ft RH Green

  • Wire size: .250
  • Inside diameter: 1-3/4"
  • Length: 12 ft
.207_1-3/4"-RH

Torsion Spring .207 x 1-3/4" x 12ft RH Brown

  • Wire size: .207
  • Inside diameter: 1-3/4"
  • Length: 12 ft
PRO-LH-5011U-RH

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • Designed for use on commercial sectional doors with high or vertical lift
  • May also be used on small rolling grilles with max. 15 cycles per hour
  • Includes chain hoist
  • Includes solenoid brake
  • On board receiver with antenna
  • On-Board receiver holds up to 20 transmitters
    • .......more details
Installation manualSpecification sheet
H14G05

Hinge #5 x 14 gauge

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • #5 position
  • Use between sections 5 and 6
  • Same as part number 245
    • .......more details
SEL2641R433-C2P

Erone 2-Relay Stand Alone Power Receiver 433MHz

  • Up to 85 transmitter keys
  • 1 NO relay + 1 NO/NC relay (230Vac)
  • Self-learning memorization
  • Relays with Pulse step or delayed operating mode.
  • Power requirements: 12/24Vac/dc
  • Dimensions: 140 x 115 x 53mm (5.5 x 4.5 x 2in)
    • .......more details
Installation ManualWireless System Chart
SEL2641R433-Z4

Erone 4-Relay Stand Alone Receiver 433MHz

  • Up to 85 transmitter keys
  • 2 NO relay + 2 NO/NC relay (24VA)
  • Self-learning memorization
  • Standard pulse output Relay number 4 can be setup to latched output
  • Can be used for O/S/C
  • Power requirements: 12/24Vac/dc
    • .......more details
Sell SheetBrochureWireless System Chart
MOUNTSHAFT001A

Manaras Clutch Shaft Kit for MJH

  • Input / clutch shaft kit for MJH built after 1999
Drawing
LIMIT021

Manaras Single Limit Switch with Flat Lever

  • Single limit switch (SPDT) used to stop the door at top and bottom or as disconnect switch
  • Unimax
  • Snap-action
Limit Switch Chart
2705.162_180

Whiting Curbside Torsion Spring for Cube Truck Roll-Up Doors 18" Long Galvanized

  • Most common torsion spring for cube trucks
  • Specs: .162 x 2-3/16" x 18" Long
  • For Roadside order part # 2704.162*180
308302

Linear 2-Channel Multi-Code Key Ring Transmitter 310 MHz

  • Open/Close remote for 2 doors
  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 12-volt battery
  • Codes: 1024 codes for each channel (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
1336.2

Whiting Roadside Top panel Closure Bracket 10" Raduis

HAE00049

Linear Drive Sprocket Holder and Belt Clamp

218189-01

Linear Trolley Assembly

220205-02

Linear Complete Hardware Kit for LDO LSO LCO

  • Includes all the hardware needed to install the operator in its entirety.
  • Includes the rail hardware (door bracket and header bracket) and hardware for installing the safety beams.
218014-02

Lamp Socket Assembly

  • For models LSO LCO LDO
1336.5

Whiting Stainless Steel Curbside Top Closure Bracket for 10" radius

5600.3

Whiting Truck Door Stainless Steel Bottom Roller Bracket Assy Complete

4009-6FT

Aluminum Retainer only for Light Brush 6' Long Reverse Angle

  • For reverse angle rolling steel doors.
  • For use with Light Brush or Vinyl Insert.
4010-6FT

Aluminum Retainer only for Light Brush 6' Long 180 degree

  • For angle application (180 degree)
  • For use with Light Brush or Vinyl Insert
4001-6FT

Aluminum Retainer only for Light Brush 6' Long 45 degree

  • For angle application (45 degree)
  • For use with Light Brush or Vinyl Insert.
1003-5"-YELLOW

Bottom U-Rubber 5" Yellow 150' Long

  • 5" yellow vinyl insert 150ft spool.
1003-3"-YELLOW

Bottom U-Rubber 3" Yellow 200' Long

  • 3" yellow vinyl insert 200ft spool.
1003-4"-YELLOW

Bottom U-Rubber 4" Yellow 200' Long

  • 4" yellow vinyl insert 200ft spool.
1003-5"-150FT

Bottom U-Rubber 5" Black 150' Long

  • 150ft spool of vinyl insert.
1009-1-3/8"

Bottom Nail-On for Wood Door Heavy Duty per foot

  • For 1-3/8" commercial doors.
  • For heavier applications than the 1009-1-3/4".
  • Provides a better cushion.
  • Color: Black
1014-1-5/8-14'

Rigid Vinyl Bottom Retainer Notched 14' Long

  • Black - for door thickness of 1-5/8"
1005-1-3/8-24'

Aluminum Bottom Retainer U-Shaped 24' Long *** 24' is DISC

  • For door thickness 1-3/8"
7001-16-BROWN

Commercial Side & Top Weather-Strip 16' Long - Brown (DN)

  • Brown galvanized steel with brown dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
1104-14FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 14' Long - Black (B)

  • Black rigid vinyl retainer with black flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-16FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 16' Long - Black (B)

  • Black rigid vinyl retainer with black flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-12FT-DK-BN

Residential Side & Top PVC Weather-Strip with cap 12' Long - Commercial Brown (DN)

  • Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-14FT-DK-BN

Residential Side & Top PVC Weather-Strip with cap 14' Long - Commercial Brown (DN)

  • Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-14FT-BROWN

Residential Side & Top PVC Weather-Strip with cap 14' Long - Brown (N)

  • Brown rigid vinyl retainer with brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-14FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 14' Long - Cream (C)

  • Cream rigid vinyl retainer with cream flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Almond
1104-16FT-SAND

Residential Side & Top PVC Weather-Strip with cap 16' Long - Sandstone (D)

  • Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Taupe
1104-14FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 14' Long - White (W)

  • White rigid retainer with white flexible vinyl.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1102-24-BLACK

Commercial Side & Top Weather-Strip 24' Long - Black

  • Aluminum retainer with black heavy-duty dual fin vinyl.
32-48-60

Extension Spring 8' Door - 60 lbs Brown ** check for availability

  • Double - Loop
  • 32" long 48" stretch 60 lb load
  • Springs sold individually
25-42-220

Extension Spring 7' Door - 220 lbs Green w/ clip

  • Double - Loop
  • 25" long 42" stretch 220 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
25-42-200

Extension Spring 7' Door - 200 lbs Tan

  • Double - Loop
  • 25" long 42" stretch 200 lb load
  • Sold individually
  • Rated for 10000 cycles
  • Same as part number 120
Spec Sheet
25-42-180

Extension Spring 7' Door - 180 lbs Gold

  • Double - Loop
  • 25" long 42" stretch 180 lb load
  • Sold individually
  • Rated for 10000 cycles
  • Same as part number 118
Spec Sheet
25-42-130

Extension Spring 7' Door - 130 lbs Yellow

  • Double - Loop
  • 25" long 42" stretch 130 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
25-42-120

Extension Spring 7' Door - 120 lbs Green

  • Double - Loop
  • 25" long 42" stretch 120 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
25-42-80

Extension Spring 7' Door - 80 lbs Gold

  • Double - Loop
  • 25" long 42" stretch 80 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
95-00114

Truck Door Rivet 1" Stainless Steel

  • Stainless steel construction
  • Round head design
  • Cross Reference: T #89217-0032
28-32072

Truck Door 2" Horizontal Track with 8" Radius 107" Curbside (RH) for Whiting Roll-Up Doors

  • SPECS: Length: 107" Fits door sizes: Up to 96" high
  • Cross Reference: W #11-2
  • Galvanized steel 14 gauge construction
  • Tongue and groove for proper alignment at joints
  • 8" radius
  • For use with 2" diameter steel or nylon rollers
    • .......more details
28-32081

Truck Door 2" Horizontal Track with 8" Radius 120" Roadside (LH) for Whiting Roll-Up Doors

  • SPECS: Length: 120" Fits door sizes: Greater than 96" high
  • Cross Reference: W #11-3
  • Galvanized steel 14 gauge construction
  • Tongue and groove for proper alignment at joints
  • 8" radius
  • For use with 2" diameter steel or nylon rollers
    • .......more details
28-02090

Truck Door 2" Vert. Track and Right Angle Assembly 96.5" Roadside (LH) for Whiting Roll-Up Doors

  • SPECS: Length: 96.5" Fits door sizes: 72" - 90" high
  • Assembly includes: Right angle mounting track Vertical track and Torsion bracket
  • Cross Reference: W #2275-2
  • Galvanized steel 14 gauge construction
  • Tongue and groove for proper alignment at joints
27-20401

Truck Door Bracket for Torsion Assembly Curbside (RH) for Todco Roll-Up Doors

  • Steel construction
  • Zinc plated finish
  • Cross Reference: T #51036-1 W #4029 360100
27-20500

Truck Door Bearing and Bracket Plate Assembly for Roll-Up Doors

  • Zinc plated finish
  • Bearing with 1" bore pressed in a football style flanged retainer
  • Factory installation assures proper bearing alignment
  • Cross reference: T #51038 W #4033 320000
27-20127

Truck Door Spring Spacer 35" long for Whiting Roll-Up Doors

  • Extruded PVC construction with zinc plated thrust washer.
  • Cross Reference: 2471