Devanco Canada - Get The Right Garage Door Opener‎ and Parts

RADIO-37

Manaras MCR-32 Open/Stop/Close 24V receiver Nema 1 313 MHz ** To extent of Inventory

3-Channel O/C/S receiver controls one operator with MCT series transmitters.
Steel Nema 1 enclosure.
24 VAC input voltage.
2 N/O and one N/C relay
Commercial antenna Included (Radio029).
Replaced by RADIO-RE900A

Programming Instructions - ECB Programming Instructions - CONT

2237.096

Whiting Coldsaver Intermediate Panel 13-1/2" x 96"

Fits Coldsaver Roll-Up Doors
1-1/8" thick 96" wide

4009-6FT

Aluminum Retainer only for Light Brush 6' Long Reverse Angle

For reverse angle rolling steel doors.
For use with Light Brush or Vinyl Insert.

1019-1-3/8-16'

Rigid Vinyl Bottom Retainer Flat 16' Long

Black - for door thickness of 1-3/8"

9002-24FT

Commercial Side & Top PVC Weather-Strip Clip-On 24' Long *** To Extent of Inventory

Black rigid vinyl retainer with black flexible vinyl insert.
Reverse angle clip-on vinyl retainer.
Side use: clips onto steel jamb.
Also for residential use.

1106-16-BLACK

Commercial Side & Top Weather-Strip 16' Long - Black

Aluminum retainer with black dual fin vinyl

1001-16-GREY

Commercial Side & Top Weather-Strip 16' Long - Grey

Aluminum retainer with grey dual-fin vinyl
Sold by full case quantity (10)

26-14323

Truck Door Bottom Panel with Seal (13" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish
Comes only with bottom retainer and seal (installed)

25-10311

Truck Door Heavy-Duty Lift Handle Zinc

Heavy-duty wide grip design
Zinc plated finish
Cross Reference: T #61401 W #1715 250000

25-01439

Truck Door 1/8" Stainless Cable 5/16" Eye 115" for Roll-Up Doors Sold per Pair

Works with both Whiting and Todco doors
Aluminum eye ends are used on 5/16" eye cables
Cable size: 1/8"

6X10SC50

Devanco Loop 6' x 10' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

2'6X6PO50

Devanco Loop 2'6 x 6' pave-over 50' lead-in

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

.437_6"-RH

Torsion Spring .437 x 6" x 12ft RH Red/Green

Wire size: .437
Inside diameter: 6"
Length: 12 ft

.283_5-1/4"-LH

Torsion Spring .283 x 5-1/4" x 12ft LH White

Wire size: .283
Inside diameter: 5-1/4"
Length: 12 ft

1336.6

Whiting Stainless Steel Roadside Top Closure Bracket for 10" radius

.283_6"-RH

Torsion Spring .283 x 6" x 12ft RH White

Wire size: .283
Inside diameter: 6"
Length: 12 ft

BPPB17524

Garex Bottom PVC Moulding White for 1 3/4" Door U shaped 289"(24')

1003-1-3/8-14'

Aluminum Bottom Retainer L-Shaped

For 1-3/8" thick doors.

32-48-240

Extension Spring 8' Door - 240 lbs Blue ** Replaced by 27-48-240

Double - Loop
32" long 48" stretch 240 lb load
Springs sold individually

Spec Sheet

28020020-500

Cable Stainless 5/16" 1x19 500' Inox ** Price on Request

Not for use in aircraft applications
1x19 contruction type 302 / 304

Comparison charts

ME120-B-4E-P/FT

Miller Edge Sensing Edge Black 4-Wire Monitored End Outlet Sold per Foot

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

.375_3-3/4"-RH

Torsion Spring .375 x 3-3/4" x 12ft RH Yellow/Green

Wire size: .375
Inside diameter: 3-3/4"
Length: 12 ft

2100-917-UPS

Linear Shaft Output 1" HSLG UPS

34030308

Polyester Lifting Sling Type 3 Eye / Eye 3" x 8'

2-ply
Minimum tensile strength of 9800 lbs per inch of width

1008-1-3/8"

Bottom Nail-On for Wood Door Light Duty per foot

For 1-3/8" doors.
Color: Black

26-94523

Truck Door Intermediate Panel (13" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

PRO-GHC-10053U-L

Micanan 1 HP 575V 3P Gearhead Operator with N1 Eyes Monitored ECB Left Hand

External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation
Full function Smart 10.0 logic board and on-board receiver

.......more details

41C2735

LiftMaster Chain and Cable Assembly CMC84

Fits a Sears Craftman CMC84 operator

WHTG-COLDSAVER

Whiting Special Order ColdSaver Door ** POR

Special order to customer's specs
2-1/8” thick panels built with aluminum facings inside and out for easy cleaning and excellent acceptance of paint and decals.
No rivets on face of door to interfere with lettering or decals.
Aluminum extruded panels .070” thick resist puncture.
Foam-in-place urethane insulation.
Panel joints are double sealed.

.......more details

MOUNTSHAFT017

Manaras Clutch Shaft Kit for MTH MTBH (no pulley) Old Pre-1998

Input / clutch shaft kit for MTH MTBH
For old MTH MTBH with 1" diameter input shaft no pulley included

.375_6"-LH

Torsion Spring .375 x 6" x 12ft LH Yellow/Green

Wire size: .375
Inside diameter: 6"
Length: 12 ft

.250-2-R

Cut-to-Length Torsion Spring .250 x 2" Right Hand Wound Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

1003-6.5-PER-FT

Bottom U-Rubber 6.5" Black Sold per Foot

98EO626

Panic Bar for Pedestrian Door- Exit Only

Panic Bar for exit only

PRO-HB-7538U-RH

Micanan 3/4HP 380V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

H505L5-LH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 575 VAC 3 Ph Logic 5 Left Hand **No Longer Available

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

.306_2-5/8"-RH

Torsion Spring .306 x 2-5/8" x 12ft RH Red

Wire size: .306
Inside diameter: 2-5/8"
Length: 12 ft

VWS-34-GOLD-OAK

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Gold Oak *** No Longer Avaialble - USE MEDIUM OAK

Pan head

1104-12FT-BRONZ

Residential Side & Top PVC Weather-Strip with cap 12' Long - Bronze (F)

Bronze rigid vinyl retainer with bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

MSI0009

Micanan Solenoid Lever

Fits PRO-HHDW

K001D8398

LiftMaster 1PH L5 Power Board 115V/230V N4/N4X

1 Phase L5 Power Board (115/230V NEMA N4/N4X) Replacement Kit
For use with various LiftMaster® Logic 5.0 Commercial Door Operator Models
Complete kit includes: 1PH Power board and standoffs required for installation

2376.182.27.930

Whiting Torsion assembly .182 wire size 27" spring length 93" shaft

This is a full balancer assembly
Twin springs one road one curb with a shaft through it

R2TH

Erone Radium Mini 2-Button Transmitter 433MHz - HID Tag *** Sold in Multiples of 10 Only

The RADIUM remotes are compatible with all standard 433 MHz RADIUM wireless receivers ie WRW model
The R2TH models comes with built-in HID tag
They have been designed with a high security coding system (KeeLoq® Hopping code).
A special algorithm ensures a continuous synchronization between the receiver and transmitter
Range up to 820 ft (250 m)
Two CR2016 batteries included

.......more details

MRGHB-6437-M-N1-LH

Manaras 3 HP 480V 3P Jackshaft Monitored w/N1 Eyes with break Left Hand

A very heavy-duty worm gear industrial operator designed for use on large sectional multi-blade and industiral rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

MRGH-6537-M-N1-RH

Manaras 3 HP 600V 3P Jackshaft Monitored w/N1 Eyes Right Hand

A very heavy-duty worm gear industrial operator designed for use on large sectional multi-blade and industiral rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

MRGH-6236-M-N1-RH

Manaras 2 HP 208V 3P Jackshaft Monitored w/N1 Eyes Right Hand

A very heavy-duty worm gear industrial operator designed for use on large sectional multi-blade and industiral rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

MGT-6534-M-1

Manaras Heavy Duty Industrial Gearhead 1 HP 600V 3 Ph Monitored w/N1 Photoeyes

Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
25 cycles per hour 80 cycles per day
It incorporates a drum-band type solenoid brake.
Tracks are an extra 36 lbs per track
3/4 HP & 1 HP operators come with #41 full roller chain

OPH-6233-M-N1-RH

Manaras Opera-H 3/4HP 208V 3Ph Monitored Board w/N1 Eyes Right Hand

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

MGH-6235-M-N1-LH

Manaras 1.5 HP 208V 3P Jackshaft Monitored w/N1 Eyes Left Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

Specification Sheet Drawing Diagram

MGH-6434-M-N1-LH

Manaras 1 HP 480V 3P Jackshaft Monitored w/N1 Eyes Left Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

Specification Sheet Drawing Diagram

MGH-6114-M-N1-LH

Manaras 1 HP 120V 1P Jackshaft Monitored w/N1 Eyes Left Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

Specification Sheet Drawing Diagram

PRO-HBHW-7581U-L

Micanan 3/4HP 208V 1P Heavy-Duty Jackshaft N4 Eyes Monitored ECB Left Hand (Pro-HBHW)

3/4 HP208V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

OGH-6235-M-N1-LH

Manaras 1-1/2 HP 208V 3Ph Gear Head Operator with Monitored ECB N1 Eyes Left Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

OGH-6234-M-N1-LH

Manaras 1 HP 208V 3Ph Gear Head Operator with Monitored ECB N1 Eyes Left Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

OTBH-6214-M-N1

Manaras Trolley Operator 1 HP 240V 1Ph Monitored w/N1 Eyes

Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
25 cycles per hour 80 cycles per day
It incorporates a drum-band type solenoid brake.
Tracks are an extra 36 lbs per track
3/4 HP & 1 HP operators come with #41 full roller chain
Includes PHOTO-070

.......more details

PDC300-CH-OPTION

Pulse300 Chain Hoist Option Only

Added option to a Pulse 300 operator

26130

Doorlec Hoist Shaft Threaded 5/8" x 12" GH/GHX

Works on GH/GHX

BPPN17510

Garex Bottom PVC Moulding Black for 1 3/4" Door U shaped 120" (10')

1676.98

Whiting Bottom Seal 96" for 1801 U-Channel ** Price by Quote

Special order item. Price by quote only

1801.77

Whiting Aluminum U-Channel 96" *** Price by Quote

Special order item. Price by quote only
For bottom seal use item 1676.96

GALV-331-6-R

Cut-to-Length Torsion Spring .331 x 6" Right Hand Wound Galvanized Red/White

Priced per inch - cones and filler sold seperately
For factory installed cones use part no. C-600-INSTALLED
For spring filler use part no. SPRING-FILLER
Galvanized

K94-36992

LiftMaster Brake Cable Harness 1PH L5

Compatible with various LiftMaster® Logic 5.0 Commercial Gate Operators

5-18-4

Tapered Angle Continuous 2" Heel x 129" L Sold in PAIRS

For 2" track up to 2" thick

EIM-101

Miller Edge Electronic Interface Module w/Junction Box (JB-02P-W)

Designed for use with pre-UL325-2010 commercial door operators and Miller Edge CPT sensing edges.
It's a durable weather-resistant solution housed in a NEMA 4-rated junction box.
This module is particularly suited for overhead doors using retracting reels or coil cords

OSH-6433-M-N1-LH

Manaras Opera-SH 3/4HP 480V 3Ph Monitored w/ N1 Eyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation brake and a floor level engaging device
Clearence: side room required 16"

PDC300-34-1-40-20

Pulse300 Direct Drive Opener 3/4 HP 110/240V 1ph 1" Shaft 40:1 20' Cable ** Price by Quote Only

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

.......more details

0824-2-WHITE

Elton Commercial Window 2" thick Door 0824 White Frame Sealed Glass

Screw together window kit
Thermal window
Frame size: 23 15/16" x 7 15/16"
Cut-out size: 23-1/8" x 7-1/8""
Vision area: 21-9/16" x 5-1/5"
Different glass options and frame colours are available upon request

.......more details

CRATING

Crating Charge

1005-3-18'

Aluminum Bottom Retainer 3" U-Shaped 18' Long

For door thickness 3"

K17-36530

LiftMaster Gear Reducer and Motor Pulley

Includes gear and reducer pulley motor pulley
Includes dual-set screw fastener
Groove-lock channel on each pulley
For LiftMaster CSL Series commercial slide gate operators

51-013611

Blue Giant Sensor Wand Flat 21 inch **Special Order

Price by Quote Only

15-50B72LGH

Sprocket 72 Teeth 1" Bore 1/4" Keyway w/SS

Same as 71-1550b72LGH

CP-SH-34-MC3-65

Lynx Complete Limit Shaft Assembly #65 Chain

For trolley operator

IP-MONSQ

CDVI Interior Touch Screen Monitor for IP-MDS/IP-SDS Video Intercom System (Square)

Interior 7" touch screen TFT monitor for use with the IP-MDS/IP-SDS intercom systems in white.
IP system connects through the PoE system and also has a free to download app available on iOS and Android. The VDP app allows for users to connect with visitors at the door station and can control the door locks remotely.
Square shape (available in rectangular shape: IP-MON)
SIP Server
Operating temperature: -10C to 55C
Call recording and built-in memory

.......more details

10-BR2900

BEA 2 Relay Logic Module + 900MHZ Wireless Technology

2 relay logic module ideal for applications requiring sequencing of electric locking devices and automatic door activation.
Day/Night mode allows users to designate "secure" or "unsecure" access for controlled entry points.
Push plates with wireless transmitters can be programmed to operate during specific time periods.
Programmable transmitters per receiver: 75 (unlimited for universal timer)
Input: DRY contact
Temperature rating: -22 to 158F

.......more details

NEW-HAMP-XL

Garex Ready to Install Country Style Special Order

Insulated garage door designed to be energy efficient with R-16 thermal resistance value
With 11 vertical lines featured in the embossing adding a more contemporary touch
Door Thickness: 1 ¾" (4445 mm) / RSI 281 (R-16)

GALV-273-2-R

Cut-to-Length Torsion Spring .273 x 2" Right Hand Wound Galvanized Orange/Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

GALV-331-334-R

Cut-to-Length Torsion Spring .331 x 3-3/4" Right Hand Wound Galvanized Red/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED
Galvanized

GALV-306-334-L

Cut-to-Length Torsion Spring .306 x 3-3/4" Left Hand Wound Galvanized Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED

GALV-306-258-L

Cut-to-Length Torsion Spring .306 x 2-5/8" Left Hand Wound Galvanized Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-283-334-L

Cut-to-Length Torsion Spring .283 x 3-3/4" Left Hand Wound Galvanized White Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED

2806.177*290

Whiting Spring Assby .177 x 2-3/16 x 29" Roadside

Replacement torsion spring with cones
Specs: .171 x 2-3/16" x 29" Long
Roadside
For Curbside order part # 2807.177*290

GALV-406-6-L

Cut-to-Length Torsion Spring .406 x 6" Left Hand Wound Galvanized Blue/Yellow Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED
Galvanized

MD-00033

Roller Chain #60 10' per Pack

MG00020

Micanan Flat Washer 1-1/16" ID x 1-3/4" OD

OPH-6212-M-N1-RH

Manaras Opera-H 1/2HP 240V 1Ph with Monitored Board and N1 Photoeyes Right Hand

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"
25 cycles per hour 100 cycles per day

.......more details

178B45

LiftMaster Curved Door Arm (K10-10203)

Also known as: 1010203 105004 10-10203 K10-10203
For use with various LiftMaster® Medium Duty Commercial Door Operators

GALV-295-6-144-L

Torsion Spring .295 x 6" x 12ft LH Galvanized Blue

Wire size: .295
Inside diameter: 6"
Length: 12 ft
Galvanized Stenciled

GALV-295-6-144-R

Torsion Spring .295 x 6" x 12ft RH Galvanized Blue

Wire size: .295
Inside diameter: 6"
Length: 12 ft
Galvanized Stenciled

5M-NICE-BAR-ASBY

NICE Replacement Bar Assembly for M5BAR Barrier Gate

Bar assembly comes with:
XBA5
XBA13 -- RUBBER IMPACT PROTECTION STRIP
WA10 -- RED ADHESIVE REFLECTIVE STRIPS
SPGAP06400A – NYLON INSERT KIT
PD1614B0000

.......more details

GH751L5-LH

LiftMaster Gearhead with Brake 3/4HP 115/230V 1P L5 Left Hand ***No Longer Available

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details