Devanco Canada - Get The Right Garage Door Opener‎ and Parts

25-01435

Truck Door Stainless Cables 110" 5/16 eye 7x19 Pair for Roll-Up Doors

Works with both Whiting and Todco doors
Aluminum eye ends are used (only on 5/16" eye cables)
Cable size: 1/8"

CUSTOM4X8PO

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

4X10SC50

Devanco Loop 4' x 10' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

4X8PO50

Devanco Loop 4' x 8' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

CADROLL

3" Stainless Steel Carwash Roller 7" Stem ** To Extent of Inventory

Stainless Steel Shaft no bearing design
Roller made from NMW plastic which is more wear resistant that steel because it causes less friction
Rated for 200 000 cycles
Pound Load: 145 lbs

1104-8FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 8' Long - White (W)

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with cap to hide screws.

65_52091-14

LiftMaster Manual Hoist Mod. M8 #41 Chain for 14ft High Door

For 3/4 Hp & 1 Hp Trolley operators
Includes floor level brake release cable 1" x 12' round bar.

Installation Manual

1013-1-1/4-9'

Rigid Vinyl Bottom Retainer L-Shaped. 9' Long

For door thickness: 1-1/4"

41C2735

LiftMaster Chain and Cable Assembly CMC84

Fits a Sears Craftman CMC84 operator

MP00021

Micanan Up-Charge Track and #410 (#48) chain for 24' h Door *Actual length 318"*

For 1/3 HP and 1/2 HP operators only

GRX-138-U-WHT-10

Garex 1-3/8" Bottom PVC U Retainer White 120" (10ft)

Does not include the u-rubber

BL-BAG-12

Barlock Hardware Bag Only for Doors 13ft and Over

Does NOT include the locking bars

Assembly Manual

S-HOOK_SMALL

S Hook #8 Small 1/8" x 1-3/8"

PMT20KIT

Carlo Gavazzi PMT20RI & PMT20I Thru Beam Kit

Suitable for exterior applications NEMA 4
Multi-supply voltage 12-240VDC 24-240VAC
LED indication for power supply and target detected
Not recommended for carwash applications
Operating temperature -25 to +55 C
Terminal 5 Common "NO" on Terminal 4 "NC" on Term. 3

.......more details

Installation Manual

1104-8FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 8' Long - Black (B)

Black rigid vinyl retainer with black flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

OPH-6213-ECB

Manaras Opera-H 3/4HP 240V 1Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

Installation Manual Sell Sheet

.273_3-3/4"-RH

Torsion Spring .273 x 3-3/4" x 12ft RH Orange/Red

Wire size: .273
Inside diameter: 3-3/4"
Length: 12 ft

SL-300T

Skylink 1-Btn Visor Mount Transmitter 300MHz ***No Longer Available

Easy to carry or clip on sun visor.
Works in conjunction with Skylink Universal Receiver: Model SL-300R.
Operating range of 100 feet and more.
12V alkaline battery included.

1007-1-5/8-16'

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick**Actual Length 16'2"

For door thickness of 1-5/8" to 1-3/4"

41A5021-1M-315

LiftMaster Receiver Logic Board with Purple Learn Button *** Discontinued

For LiftMaster models: 1345 1346 1355 and 1356
For Chamberlain models: CG40D & CG42D
Replaces Reciever Logic Boards: 41A5021-1H-315 41A5021-4M-315 41A6135-1A 41A6148-1 and 41A6148-1A

1003-1-3/8-8'

Aluminum Bottom Retainer L-Shaped

For 1-3/8" thick doors.

TRACK-GUARD48-NP

Track Guard 48" Tall Safety Yellow Sold as a Pair No Floor Plate

Provides impact protection to vertical track
45° angle flange adds strength protects from side impact.
7-gauge steel construction powder coated safety yellow for high visibility.
Wall flange drilled with slotted holes for four 3/8” anchors
Includes: 60-5106 (right) and 60-50105 (left) sides

71-B575-1

LiftMaster Internal Brake Kit 575V 3PH for L5 Operators

Complete with: Brake hub kit Brake release lever Brake disc Spring cup Studs Compression springs Brake solenoid Solenoid cover Spacers Mounting plate Pressure plate Feather key and Conduit
Can be replaced in-field

Instruction Manual

MGS20-Y-2U-05

Miller Edge Sensing Edge Square Yellow 2-Wire Universal Outlet 5ft Long

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty

6062

Programmable Timer *** To Extent of Inventory

12VDC or 24VDC operation is selectable
Functions include: One shot Delayed release Delayed operate Delayed pulse and Pulse / Flasher.
Momentary relay activation at the end of a desired timing cycle eliminating the need for having to use 2 timers to achieve this function
LED indicates relay is energized
Form C relay contacts are 8 amp at 120VAC / 28VDC

Installation instructions

R5205

Saddle Support for 4" Pulley

8 gauge galvanized steel

19-5116-NP

LiftMaster Trolley Roller Chain Pack #41 for 16ft Door Nickel Plated

For 3/4 & 1 HP trolley operators

300BH

3" Heavy Brush Insert 8ft Long

Polypropylene bristles
Same as model MS1712

.343-6-L

Cut-to-Length Torsion Spring .343 x 6" Left Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

25-2010

LiftMaster 10 Amp Overload Fuse

For models: SL585-50-11 SL595-50-11 SL575-50-11

TRMC38E

Telco Light Curtain Bracket 4/pkg

109099

LiftMaster Flat Wall Plate Mounting Bracket

Heavy 1/4" steel plate bracket used for wall mounting of side-mount operators.
Slots in back allow for tensioning of drive chain.
Mouting studs match up with mounting holes of LiftMaster Models DJ DH J MGJ H and GH operators.

5001-8-BLACK

Residential Side & Top Weather-Strip 8' Long - Black

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

PBTL3-RED

Replacement Button Only - N/C Stop Red

Stop switch and rubber cover for PBTL-3

EAST/STL-E3

Rolling Steel 3" Cast Eastern Steel Endlock

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks

.218-3-144-RH

Torsion Spring Mini Storage .218 x 3" x 12ft Right Hand

RPEN4-RFLCTR

LiftMaster Reflector with Support Housing

Replacement reflector for the CPS-RPEN4 photo-eyes

7FT-BELT-LDO

Linear 7ft Belt Drive Rail for LD050/LS050/LDCO (HBT7C)

7ft belt-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
Fully-assembled & pre-tensioned
Compatible with Model CHCR-7/8 carriage house I-rail conversion kit

PRO-APTC-5021-U

Micanan 1/2HP 230V 1P Apartment Trolley Op. Photo Eyes Monitored ECB

Low clearance design for APT applications (8.5")
Door speed: 7" per second
N-4 Micanan compatible monitored photocells included
Monitored board
Side access hinged cover for easy access to controls
Three button open-close-stop control station Nema-1

.......more details

Installation manual

.250_3-3/4"-LH

Torsion Spring .250 x 3-3/4" x 12ft LH Green

Wire size: .250
Inside diameter: 3-3/4"
Length: 12 ft

7470.093

Whiting Side Seal for Insulated Doors 93" Long

Fits Coldsaver and Tempguard

RS1024

Roller 2" Steel 4" stem 10 ball

Steel Roller Wheel Diameter: 2"
Working Length: 3.5" Overall Length: 4.5"
Box qty: 150 Box weight: 53.3 lbs (2-4-10 steel)

ST-CLEAR-TUBE

Soft Touch Clear Tubing Sold per Foot

PRO-HB-7525U-LH

Micanan 3/4HP 220V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

ME00054

Micanan Clutch (Input) Shaft Only for Pro-H/HHD N4 3/4" x 17-5/8" (3/4 HP-1 HP)

3/4" x 17-5/8"

13-10024

LiftMaster Limit Nut

Limit nut / cam for commercial door and gate operators

LDCO800

Linear 800 Newton DC Powered Garage Door Opener Accept Both Belt or Chain Rail *Replaced by LDCO863B*

The energy-efficient DC-powered operator that runs at an AC-equivalent speed.
DC drive motor with soft-start and soft-stop for smooth quiet long-term reliable performance.
Optional Battery Backup available for added peace of mind. Sold separately
Low-power standby mode dramatically reduces energy consumption
Supplies 800 Newtons of lifting force for heavy doors
Compatible with belt-drive or chain-drive T or I beam rails up to 10'

.......more details

Installation manual Sell sheet Remote compatibility chart

75-10359

LiftMaster Brake Pad

same as K75-10359
For MJ / HMJ and MT / BMT operators

MD00128

Micanan #410 Roller Chain 27 Pitch c/w Connecting Link

STRUT-2-1/4-9'

Door Strut 2-1/4" Hemmed 9 ft Long

Reinforcement bar 2-1/4"
Electro-Galvanized
22-GA

1003-1-3/8-12'

Aluminum Bottom Retainer L-Shaped

For 1-3/8" thick doors.

K20-1100C-2TLP

LiftMaster Electric Motor 1 HP 115/230V 1Ph TEFC Logic

D-22A

Linear 1-Channel 1-Button Handheld Transmitter ** Available to extent of inventory

Removable wall mounting clip
Standard digital format: 256 selectable codes
Powered by one 9-volt battery (included)
Current consumption: 12 mA transmitting
RF frequency: 303.875 MHz
Dimensions: 2.16" W x 3.75" H x 0.88" D Order number: SNT00016

.......more details

M3A

Safety Inertia Brake 1" Bore 2283 Torque PCM3AP

Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
Ideal for commercial and industrial use; specifically with rolling shutters and balanced and well maintained rolling doors.
Fully resettable and reusable after lockout ocurrs.
Commonly paired with commercial safety bottom brackets in sectional door applications.
Fits 1" shaft
Note: Sectional torsion door systems must be well maintained to ensure desired inertia brake activation.

.......more details

1106-12-BLACK

Commercial Side & Top Weather-Strip 12' Long - Black

Aluminum retainer with black dual fin vinyl

33950R

Genie Up Limit Switch Assembly 66 " Wire

For use on 7'6" rail assemblies.
For Genie Excelerator models and Overhead Overdrive models
Open / Up magnetic limit switch

823LM

LiftMaster Remote Light Switch Sec+ 2.0 ** To Extent of Inventory

Controls lights remotely
Turn on lights in your garage yard or home with your garage door opener remote control
Use with LiftMaster Internet Gateway to control lights from smartphone or computer
Compatible only with Security+2.0 garage door openers and accessories enabled by MyQ technology

Installation Manual Manuel d'Installation

25-60052

Truck Door Latch Plate for Whiting Roll-Up Doors

Steel construction Plain finish
Contoured for proper lock engagement
Cross Reference: W #2804

AW-12A

Miller Edge Air Wave Switch in NEMA 4 Enclosure

Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
Applications: commercial sectional doors rolling doors and mass transit
Works on doors up to 60ft
Can be used with standard pneumatic hose and Miller Edge extrusion
Sensitivity: 2mm to 500mm
Ambient temperature range: -49F to 180F

.......more details

Instructions Manual Sell Sheet

MZ-00005

Micanan Synthetic Oil in Reducer Cold Temp. Mod.

For models PRO-GH GHC GT and GSD

4004-8FT

Aluminum Retainer only for Heavy Brush 8' Long 45 degree

For angle application (45 degree)
For use with Heavy Brush

.192-2-RH-C

Torsion Spring 192 x 2" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .192 ID: 2" Length: 12 ft

L-7-50-0-M

Cable Tie Standard 50 LB Black 7" Nylon 1000/pkg

Ultraviolet Resistant

SETR2641AM2KH

Erone 2-Channel Mini Transmitter with HID Tag Black 433MHz

With built-in HID tag
Heavy-duty construction
Elegant & easy to carry
Unobstructed range: 656 ft (200m)
60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
Two lithium batteries (CR2016) included

.......more details

Wireless System Chart

.243-134-R-C

Cut-to-Length Torsion Spring .243 x 1-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

MH00006

Micanan Shaft Collar 3/8" I.D

801-300-001-00

Equinoxe Long Range Receiver 1-Door 433 MHz Pre-2016 *** To Extent of Inventory

1000 ft range
Old generation - prior to 2016

Programming Instructions Instructions de programmation

OPJ-6212-ECB

Manaras Heavy-Duty Jackshaft Operator 1/2 HP 240V with Electronic Circuit Board

An industrial operator designed for use on standard high and vertical lift sectional doors
Can also be used on rolling doors and grills
It incorporates a floor level disconnect mechanism for manual operation
25 cycles per hour 100 cycles per day
Continuous-duty single phase capacitor start or 3 phase motor open drip proof
Mechanical brake

.......more details

Installation Manual Sell Sheet

.262-3-3/4-RH-C

Torsion Spring .262 x 3-3/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .262 ID: 3-3/4" Length: 12 ft

A22KITSKB

Erone Web-Based IP 2-Door Controller A22 w/SOLARKPB Kit

Atrium 2-Door Controller Kit Web Based IP Hybrid
Module Embedded Web Server Includes 2 SOLAR Keypad/Reader Software
Pre-assembled universal plug-in power supply (120V/240V) included
Convert any A22 door controller to an A22EC elevator controller by simply updating the firmware for free (up to 256 floors)
On-board Ethernet Port with AES 256-bit encryption
Auto-detect hardware modules Quick and easy card enrollment procedure

.......more details

Wireless System Chart

ED-1300

Devanco Citrus Degreaser & Cleaner 425g

This special blend of solvents is designed to quickly and effectively loosen and dissolve grease oil and dirt from metal parts
Leaves no residue
Pleasant citrus scent

Material Safety Data Sheet Fiche Signalétique

510.5377.00

Whiting Side Seal Option for Dry Freight Door

A extra option when ordering a Dry Freight door
When purchased alone use part number 5377.115

9150000624

1/4" Sleeve ONLY 100/pkg

Sleeves only 100 per pack

1104-7FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 7' Long - White (W)

White rigid vinyl retainer with white flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

.295_3-3/4"-RH

Torsion Spring .295 x 3-3/4" x 12ft RH Blue

Wire size: .295
Inside diameter: 3-3/4"
Length: 12 ft

.331-5-1/4-RH-C

Torsion Spring .331 x 5-1/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .331 ID: 5-1/4" Length: 12 ft

MX00203

Micanan Complete Control Box Only for PRO-HHDU/TU Nema 1 110V

16-8001

LiftMaster Cogged Vbelt 4L 34"

This is a replacement Belt (4L340).
Compatible with LiftMaster® Model BG770 Barrier Gate Operators.

STEELCRAFT-TD134

SteelCraft TD134 Replacement Panel Special Order

Ordered to customer specs.
Price by quote only

2806.177*250

Whiting Spring Assby .177 x 2-3/16 x 25" Roadside

Replacement torsion spring with cones
Specs: .171 x 2-3/16" x 25" Long
Roadside
For Curbside order part # 2807.177*250

C715477300K-1.25

Governor 1.25" Bore 1/4" KW

RB-G-K10C

Miller Edge RBand Monitored Wireless Gate Edge System

RBand Gate Edge Transmitter/Receiver System
The system is intended to provide a wireless connection between a monitored sensing edge and a motorized operator that controls the associated gate
The RBand Receiver is compatible with up to 3 RBand Transmitters on 2 channels; 6 total transmitters.
RBand meets the 2016 UL 325 requirements for monitored devices and has been certified as a UL 325 Recognized Component.
It is designed for use with operators that comply with 2016 UL 325 using a Miller Edge 10K Sensing Edge.

2300-925-BLACK

Linear Operator Cover Only Black

The Linear 2300-925-BLACK is a replacement black cover for the following series of gate operators: SWR SWC and SWD
Made of Polyethylene

SEL2641R433-Z4-F

Erone 4-Relay Stand Alone Mini Receiver Fast 433MHz

2120-493

Linear Gate Arm Assy Weld Style for Swing Gate

6X26PO50

Devanco Loop 6' x 26' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

GALV-319-6-L

Cut-to-Length Torsion Spring .319 x 6" Left Hand Galvanized Blue/Green

Spring wire only. Cones and Filler extra

R5993

Shaft Collar 1" Stainless Steel with 1 Set Screw

Set Screw: 5/16 x 18
1" ID

BGARM12

LiftMaster TECHNA Barrier Gate Arm 12 ft without LED

3” Aluminum arm with integrated LED lights channel designed exclusively TECHNA barrier gate operators
Ships in manageable 6-foot sections for streamlined transport and storage enabling easy on-site assembly
Strong aluminum extrusion with reenforced male/female joining sections and fasteners for a secure fit
The arm features a bottom channel designed to hold BGARMFOAM thereby minimizing the chance of scratching the vehicle. Additionally it is compatible with the S50L a wireless edge safety device.
(Optional) LEDs are easily installed by sliding them into the arm's center channel and securing them with the included press-in clip
IP68 rated waterproof LED lights

.......more details

2807.200.280

Whiting .200 x 2-3/16 x 28" Curbside with Cones

38001404

Tork Winch CW 1800 Curtain Winch Formally TW1200 *** Price by Quote Only

Special Order item

19045

Doorlec VBelt 4L360

50181

Doorlec Brake Assembly 230/208V W/Double Pulley

Complete brake assembly

BGARM

LiftMaster 10' Arm only for Techna Barrier Gate

For use on Techna gate operator

SW-500-ADAPTER

Devanco Industrial Spring Winder 500 for 3.75" - 6" Adapter for Richard Wilcox Torsion Spring Plugs

Adapter for SW-500 to be used with Richard Wilcox spring plugs
This adapter is 5 mm higher than the universal model

TDC22X1BMC

LiftMaster MAXUM Trolley DC Comm. Op 3/4HP Equivalent 120/240V 1PH 60 Cycles/Hr 2200LB

Smooth Start/Stop Operation - DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator.
Faster Speed - Average of 12” per second opening on sectional doors.
Battery Backup Option - (battery backup kit sold separately).
Floor-Level Wall Controller - 4-line LCD display gives you access to programming troubleshooting and diagnostics at floor level saving time and money.
Wi-Fi® and myQ® - Easily connect to myQ Facility via Wi-Fi for visibility into what is happening at your door and control it from your web browser; no need for additional hubs or accessories. Know what accessories activate the door (remote transmitter keypad etc.)
Drive Type 65:1 Gearbox with #50 Chain Output

.......more details

LVB420-11SF/P2

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P2

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details