Devanco Canada - Get The Right Garage Door Opener‎ and Parts

MV-00297

Micanan Commercial Wireless Keyless Entry 372 MHz

Will work on Micanan commercial operators that have an on-board receiver
If there is no receiver then MK-00648 is required
Same as MV-00086

Programming instructions Instructions de programmation

BGARM

LiftMaster 10' Arm only for Techna Barrier Gate

For use on Techna gate operator

CAPACITOR037R

Manaras Capacitor 340-408uf 165VAC incl. Bleeder Resistor

Replacement for capacitor037 on MOTOR256

WHITING-RV

Whiting Stainless Steel Rivet Option for Dry Freight Door

Upgrade option

BEA-10LIGHT-A

BEA Modular LED Signal Light Audible Segment

Audible Alarm 2.6 KHz ±250 Hz oscillation frequency; maximum intensity 92 dB @ 39.6 in

OSHW-6112-M-N4-R

Manaras Opera-SH w/Carwash Mod 1/2HP 120V 1Ph Mon ECB w/N4 Photoeyes Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
Solenoid activated Brake

.......more details

GALV-319-258-L

Cut-to-Length Torsion Spring .319 x 2-5/8" Left Hand Wound Galvanized Blue/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED
Galvanized

10LZR-FLATSCAN-SWB

BEA LZRFLATSCAN Kit Black 2 Sensors + Cables & Accessories

Time-of-flight presence sensor for use as a stand alone safety sensor on automatic pedestrian swing doors.
Can be used as a reactivation sensor on the approach side of low energy doors.
Generates 170 detection points across a single curtain allowing for coverage over the entire face of a single door leaf including the hinge area.
Finger Detection Technology™ utilizes 100 detection points within the hinge area of the door protecting hands and fingers while the door is in motion.
Max. detection range: 13' with a reflectivity of 2%
IP54

.......more details

FOHMODDC

LiftMaster Front Of Hood Mount Bracket Kit

For use with various LiftMaster® DC JDC and JHDC Standard-Duty and Industrial-Duty Commercial Door Operators; manufactured after 2023 only.
This mounting bracket kit is utilized for front of the hood installation.
Refer to the installation manual or replacement parts diagram for specific part information before ordering to ensure compatibility.

CAPXSTKPL

LiftMaster Trim Kit with Postal Lock for CAPXS

Trim plate with integrated postal lock cover exclusively for installing with Model CAPXS – Smart Video Intercom S
Pre-Wiring included for postal lock device (not included).
Provides a clean aesthetic installation when the application calls for a postal lock while also helping hide remnants of a previous installation
Dimensions: 14” x 6.5” x 1.4”

HD3117

Heavy Duty Slide Lock 2.85" Throw Zinc Plated

Mounting holes: 0.275"

XF600VAC7

LiftMaster 600V Transformer Kit 700

For use with various LiftMaster® MAXUM Series DC 700 lbs. Standard-Duty and Industrial-Duty Commercial Door Operators

TDC12S1BMC

LiftMaster MAXUM Trolley DC Comm. Op 3/4HP Equivalent 120/240V 1PH 30 Cycles/Hr 1200LB

Smooth Start/Stop Operation - DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator.
Faster Speed - Average of 12” per second opening on sectional doors.
Battery Backup Option - (battery backup kit sold separately).
Floor-Level Wall Controller - 4-line LCD display gives you access to programming troubleshooting and diagnostics at floor level saving time and money.
Wi-Fi® and myQ® - Easily connect to myQ Facility via Wi-Fi for visibility into what is happening at your door and control it from your web browser; no need for additional hubs or accessories. Know what accessories activate the door (remote transmitter keypad etc.)
Drive Type 65:1 Gearbox with #50 Chain Output

.......more details

TDC_Installation-manual TDC_Manuel-installation Data sheet Fiche technique Quick connect guide Guide de connexion rapide Ordering guide

WD-8300

Wayne Dalton Classic Steel Garage Door ** By Quote Only

Heavy-gauge steel and a thick layer of insulation provides a smooth dependable operation that excels in appearance and strength.
R-VALUE: 12.12 / 16.12
WD's best-insulated residential garage doors feature two layers of steel surrounding a thick layer of foamed-in-place polyurethane insulation.

DC7AH

LiftMaster Battery for MAXUM Integrated BBU DC Units 7AH

For use in Liftmaster MAXUM DC Commercial BBU ops
7 AMP
20 cycles when fully charged

NINJA-001-BLACK

Rodent Ninja Garage Door Corner Guard Set

Blocks pests from entry
Fills in holes and gaps along garage door frame
Keeps insects mice and unwanted guests outdoors
Kit includes: (1) Right and (1) Left handed Garage Door Corner Guard (6) Self-tapping Screws
Made in the USA

E/BLOP/130

Automatic Systems Kit for Breakaway Arm BL229 Option ** Price by Quote Only

This is an option for the BL229 arm

HSLG-411

Linear Commercial Slide Gate Operator 3/4 HP 115V 1 Ph - Heater not Included

Great for industrial and commercial applications
Features the APeX control board
Emergency manual disconnect handle
Powder coat finish
Post mount standard; pad mount optional
Integral entrapment sensing system with dual multi-turn precision potentiometers for accurate adjustment and enhanced safety

.......more details

RLC-K36

Miller Edge Light Curtain Non- Monitored 3ft NO/NC

Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
Ideal for pre-2010 installations not requiring a monitored solution.
Ability to span up to 32' wide
Universal mounting brackets included
IP67 waterproof housing

.......more details

OTBH-6112-M-N1

Manaras Trolley Operator 1/2HP 120V 1Ph Monitored w/N1 Photoeyes

The OTBH is a heavy-duty low headroom trolley operator
Designed for use on industrial standard lift sectional doors
It incorporates a drum-band type solenoid brake
25 cycles per hour 80 cycles per day
1/2 HP operators come with # 48 (410) roller chain
Includes PHOTO-070

.......more details

41A5507-6

LiftMaster Receiver Logic Board for 2500B/D (390 Mhz)

With end-panel
Also known as 41A5507-6C 41A5507-3

OSH-6532-M-RH

Manaras Opera-SH 1/2HP 600V 3Ph Monitored No Photoeyes

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation brake and a floor level engaging device
Clearence: side room required 16"

NIR-50-325-KIT

EMX Retro Reflective Photoeye Kit UL325 NC/10K Across NO Contact EMX-5255-K

Kit includes photoeye with hood reflector with hood and mounting bracket
Retroreflective configuration
NC and 10K monitoring
50 ft. operating range
Sensitivity adjustment
Wide range operating voltage

.......more details

50-CP4

LiftMaster Sensing Probe Free Exit 100ft Lead

Self-contained free exit system designed to detect moving vehicle and open your automatic gate.
Can be installed above or below ground
Connects directly to any gate operator without an external output board.
Works with powered or solar gates.
SPECIFICATIONS: Cable Lead Length: 100 ft.
Power Requirements: 8-24 VAC oe 8-30 CSX

.......more details

HAE00072

Linear WiFi Wall Station

This Wi-Fi wall station allows direct operation of the door operator and light using the buttons.
When connected to your local wireless access point you can check status get notifications open or close the door and manage user access from any location via the Linear Android or iOS app.
Requirements: To use with the app you will need:
a Wi-Fi network with internet connectivity
a strong Wi-Fi signal in the garage where you are installing the wall station
an Android or iOS smartphone or tablet

.......more details

Programming Instructions

CORNELL-SLAT

Made to Order Pricing by Quote Only

RESET-12A-32V

Doorlec Reset 12A 32V Overload

SAFEPACK-MOD

Doorlec Safepack 24V Control Circuit

A safepack module is used as an "Intrinsically Safe Barrier Relay" and in hazardous locations with non-voltage producing sensors allowing the user to use a N.O. non-monitored sensing edge.

GH-353-1.5

Doorlec Industrial Gearhead Door Operator 1.5 HP 575V 3-Phase

Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Worm gear reducer 40:1 ratio for high-torque and long life
Solenoid Disk Brake Prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Optional Friction Clutch available

.......more details

SSZP13-6

Solid Shaft 1" Keyed Zinc Plated 13'-6" (162")

SSZP15-6

Solid Shaft 1" Keyed Zinc Plated 15'-6"

LJH-311-3/4

Doorlec 3/4HP 115V 1PH Jackshaft Operator

Technical information

HAE00070

Linear LDCO Control Board (841/850/852/863B)

DOCK-LEVELER

Special Order Hydraulic Dock Leveler Custom Order

Custom ordered to customer requirements

Dock leveler brochure

TCBOD-311

Doorlec Double Arm Barrier Gate Operator 1/2HP 120volts w/ heater and DC2000 board

raffic Control Barrier Gate Operator with 24' wishbone arm

Installation manual

343.155-CUT

Whiting Tongue & Groove Bottom Panel Plain Primer Only 15-1/2" Cut to Custom Size

Cut to exact size required ** customer must specify
Primer only
Does not come with any hardware no retainer no seal

BK-MS

Locking Bracket for T-Handle on Mini Storage Door Sold Individually

Pre-drilled Stainless Steel bracket

210272

Skylink Belt Gear for Atoms Operators

Plastic Gear
Fits Atoms / Atoms+ / Atoms Pro (AT & AN) Series

CC-007

Skylink Chain & Cable Assembly for 7ft Door EQ Model Ops

Replacement chain & cable for rail

LDCO863B

Linear DC Powered Garage Door Opener Accepts Both Belt or Chain Rail

Ultra-Smooth and Quiet Industry leading performance with variable speed operation soft start/stop and ultra quiet motor
Integrated Battery Backup Energy-Efficient LED Lighting Long life dimmable LED light panels included. Secure.
Responsive Remote Control Linear MegaCode remote controls operate over long range and employ high-security technology
Release the operator’s quick-disconnect trolley to open or close the garage door manually
Self-Diagnostic System: Confirms proper operation and alerts users both audibly and flashing the lights. In the event of a problem it pinpoints the trouble and alerts users by flashing the courtesy lights
Linear ® Smart App Advanced real-time monitoring and control of garage doors from any mobile device. * Assign custom access and permissions for up to 10 authorized users and schedule door and light operation.*Wi-Fi and internet connection required

.......more details

Remote compatibility chart

.187_2"-LH

Torsion Spring .187 x 2" x 12ft LH

Wire size: .187
Inside diameter: 2"
Length: 12 ft

18211

Limit Switch LS1 G3M Male

For use with Rite-Hite dock levelers

XAC-A

Schneider Pistol Grip Pendant Station Yellow

2 push buttons 1 emergency stop
Coil cord not included

E402-00-FM

Doorlec Ersce Utility Switch 6A/230V Roller Arm ** Indef. Delivery

Utility switch with a 'NO' and a 'NC' contact
Adjustable arm with roller
Made in Italy

24856

Stanley Front Idler Kit for Chain/Cable Openers *** NLA

For Stanley Chain/Cable Openers Only
Not for Stanley Full Chain Openers
Replaces Part #920-0147

BK338/PR

End Bearing Plate Flanged 11-GA 3-3/8" with Bearing. Commercial Sold as a pair

For commercial applications Used on wood jambs
Includes (1) RH and (1) LH plate with bearing
EBF338

MGH-6536-ECB-RH

Manaras 2 HP 600V 3P Jackshaft ECB Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

SL595151UL

LiftMaster Dual Voltage Slide Gate Op.1.5 HP 115/208/230V 1 Phase - Heater NOT Incl.

Power: 115/208/230 VAC. Single Phase.
Accessory power: 24VAC 500mA max.
Monitored safety inputs: 3 Main Board 3 Expansion Board.
Temperature specs: Without Heater: -4°F (-20°C) to 140°F (60°C). With optional heater (HTRNB: HTR460 for 460V operators): -40°F (-40°C) to 140°F (60°C)
Gate travel speed: 12 in. per second.
Security+2.0® on-board radio receiver: Up to 50 remote controls (unlimited with 811LM/813LM).

.......more details

LMPC2-ST

LiftMaster HID ProxCard II 1326 26 Bit Clamshell Card Price Per Card

HID 26 Bit Format
125 kHz
Sold in Lots of 100 - Price Shown is Price per Card
Only compatible with PPLX in stand-alone mode
Please supply Start # and Facility Code # when ordering
Dimensions: 2.135" x 3.385" x 0.075" MAX. (5.4 x 8.6 x 0.19 cm)

.......more details

RADIO-RE901B

Manaras Open/Stop/Close 24V receiver Nema 4/12 313 MHz

Wall mount
Fixed code / Dip switch technology
Commercial reciever( Learn button) 1-door
16 Fixed codes / Receiver
Nema 4/12
Approx 100' range

.......more details

60-6550-C-BLK

Speed Bump Black 36" Econo Light Weight for Concrete ***NLA

A standard speed bump system section includes (2) main pieces (2) endcaps x 5” long and (1) connector clip.
Main pieces may be added and connected to form larger units.
36” long x 10.5” wide x 2” high (main piece)
EndCap: 5” Safety Snap On End Cap - sloped modular profile prevents tripping by pedestrians.
Yellow Plates: Each speed bump section is embedded with (6) yellow safety plates of weather resistant composite material for protection from salt freeze and thaw.
Can be used as a cable cover - bottom sides include 1” x 1½” channels for protecting temporary or permanent cables or hoses.

.......more details

02-103LGO-1

Push Button Station 3-btn Surface Mount O/C/S Nema 1 For LGO Ops only

PBS-3R
Open-Close-Stop
Works with Liftmaster LGO commercial operator
Also known as: 02-103LGO1 02103LGO1
Dimensions: 5-5/16" H x 2-3/8" W x 1-13/16" D
Normally Open contact on Stop therefore it won’t work on any other LiftMaster operator besides the LGO. The 02-103 will work on all operators.

.......more details

746

Fasteners Ribbed Neck Track Bolt 5/16-18 x 3/4" Zinc 1000/box

LMPK2-SN

LiftMaster HID ProxKey III 1346 - Sentex Price Per Card ***NLA

Universal compatibility with HID proximity card readers
Provides an external number for easy identification and control
Pocket size key fob
HID Sentex 30 Bit Format
125 kHz
Sold in Lots of 100

.......more details

1209

Whiting Roller Hinge Complete

BLSI12

Pivin Drapeau Vertical Lift Barrier 1/3HP 120V 1PH 6.57A/5.65A

Specify length of arm required up to 12'
Arms made of 1" x 3" rectangular aluminum
Has a 150W heating element optional 300W is available
Operating temps: -40 degrees C to 50 degrees C
8 seconds opening/closing time
# of cycles: 750000

.......more details

BPPB17512

Devanco Bottom PVC Moulding White for 1 3/4" Door U shaped 144"(12')

J753L5

LiftMaster Industrial-Duty Jackshaft 3/4 HP 575V 3Ph L5

Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
J operators are attached to the door jackshaft to indirectly drive the door
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0® safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you

HD3120-BLACK

Commercial 3" Inside Slide Lock Black Powder Coated

Track use: 2" or 3"
Throw: 2.62"
Slide bar: 0.138"
Individually wrapped

SPGAP06400A

NICE Replacement Nylon Insert Kit

MW00024

Chain Tensioner for 1"-1" Shafts Inside the Box

Chain spreader for installation with 1" operator shaft & 1" door shaft.
Includes 2 shaft collars and set screws.

F520-3.15-SB

Fuse 5 x 20mm 3.15A 250V Slow Blow 5/Pkg

Q237

LiftMaster Crank Input for SL3000 (K75-50242) ** Discontinued

SL585101UL

LiftMaster Industrial Slide Gate Op. 1 HP 115/230/208V 1 Ph Heater NOT Incl.

SL585UL features a heavy- duty industrial lockable metal cover.
Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
Manual Disconnect when unlocked allows gate to be operated manually.
Quick Close and Anti-tailgate quickly secure property preventing unauthorized access.
Lockout/ tag-out Feature prevents power from being switched on when servicing operator and safeguards workers from high-voltage power.
Automatic Solenoid Brake prevents the gate from being back driven.

.......more details

Installation Manual Manuel installation Brochure Sell sheet

K32-37560-3

LiftMaster Gear Reducer 28:1

This is a replacement Gear Reducer (28:1). Compatible with LiftMaster® HCTDCU Overhead Gate Operators.

E3K-2018

Omron Retro-Reflective Photocell w/Built-In 10K Resistor UL325-2018 *Same as model E3K-R10K4-NR-1

Fully complies with UL325-2018 standard for gate ops. that use the 10K resistor method and also the Normally Closed method
Easy to wire terminal strip
Plug-in replaceable outputs
Range: 40ft
Power: 24-240V AC/DC
The E3K-2018 has a second relay to accommodate traditional dry contact for non-monitored applications.

.......more details

Wiring Diagrams Sell sheet

RADIO-EM901

Manaras 1-btn Mini Transmitter 313 MHz

Open/Close mini remote for 1 door
Comes with LED battery life indicator
Mini 12V battery included
Key chain holder included
Replaces RADIO-28
10-dip switches

.......more details

Manual Programming Instructions

PPLK1

LiftMaster Passport Lite 1-Button Mini Remote with Sec+ 2.0 Technology

Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators

ALUM-5P5

Aluminum 24" x 100' Spool Graphite # 5P5

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 5P5
Reverse side is #431 Bright White

Colour chart

.295-334-R-C

Cut-to-Length Torsion Spring .295 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

218758

Torque Force Spring Failure Device 1-1/4" Shaft Left Hand Side

For springs 2" up to 6"
This device can be applied on Industrial OH doors that are manual or motor operated
Must be installed on a keyed shaft

IS40

BEA Industrial Sensor Dual Technology Presence Detection BEA-10IS40

Dual technology sensor combining presence and motion detection in industrial applications.
Bidirectional unidirectional approach and unidirectional depart microwave detection options. Six modes of detection filtering and 9 uniqueinfrared patterns for highliy flexible presence detection.
Up to 7 minimum object targets
Adjustable infrared immunity modes to mitigate environmental disturbances (vibrations light and sun)
Mounting height: 8'-16'
NEMA 4

.......more details

Installation manual Sell sheet Cut sheet

DW-RS-200

Fraba Wireless Air Wave Switch Transmitter/Receiver Kit NOC/NCC

The small radio transmitter unit and the pneumatic switch are packaged within the DW3S-200 case while the receiver is built into a Nema 4 case
It is equipped with a NC or a NO relay
Kit includes radio transmitter DWTR-200 433 Mhz and receiver RSW-R 433 Mhz
Battery is included # CR2032

Operating Instructions

K71-D1PH

LiftMaster Drum Brake Kit 1 Ph 115/230V (Late Model Logic 5 Shoe and Drum Models)

Internal Solenoid Drum Brake with Cable (120V Single Phase) Replacement Kit.
Compatible with LiftMaster® Logic 5.0 Model T SD J H and HJ Industrial-Duty Operators.
Complete service kit includes: Solenoid Cover Brake Solenoid Brake Drum Cable Mounting Plate and Installation Hardware.
Quiet preferred sound profile
Industry benchmark stopping performance with adjustability
Significantly reduced modes of failure

.......more details

Installation manual Manuel d'installation

MK-00562

Micanan Relay 120 VAC 8-Pin Plug-In

MP-00077

Micanan Heavy Duty Front Idler (Trolley End Bracket) #41 w/Pillow Blocks

PRO-LJ-5011-U-LH

Micanan 1/2HP 115V 1P Jackshaft N1 Eyes Monitored ECB Left Hand

On-Board receiver holds up to 20 transmitters

25-60407

Truck Door Rear Frame Conversion Bulk Kit with 7" Header 2" Wide

Converts swing doors to roll-up doors by removing the old swing doors and weld conversion corner post and header in its place
Vehicle is now ready for roll-up door installation
Corner post has added lip length to allow easier weld during installation
Steel construction .125 thick
Each bulk kit includes two (2) corner posts and one (1) header
Plain finish

.......more details

PRO-APT-5023-U

Micanan 1/2HP 230V 3P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board
On-Board receiver holds up to 20 transmitters

PBC-3

Push Button Control Station 3-Btn O/C/S Stainless Steel Face Plate Nema 1 Flush Mount

Single gang box
Face plate: 4-1/4" H x 2-3/4" W Back Box: 4" H x 2" W

TB412-18SF

Steel Faced Laminated Bumper Black 12" x 18" 5 1/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

HINGE-411-PCG

Powdercoated Hinge #4 x 11 gauge Grey ** To Extent of Inventory

Heavy Duty 11 gauge offset hinge #4 - 0.74 lbs
Powdercoated Grey
For use with 7/16" stem rollers

RP-CAP-RSL-64-77

Lynx Capacitor RSL (1/2HP) 64-77 MFD ** repl. by 70-84 MFD

Also used in the 1/3HP openers. Replaces RP-CAP-RSL-53-64

LA500-1PKG-XLMU

LiftMaster Residential / Light Comm. DC Swing Gate Op. Extra Large Control Box UL325 (Includes LA500CONTXLMUL (K74-39309-1) LA500DC (2x) 29-NP712 LMRRUL)

LA5001PKGXLMU replaces model LA5001PKGXLMDC
Updated unit complies with new UL325 code revised Jan 2016
System now requires monitored secondary entrapment devices unit will include LMRRU safety photo eye
Includes one LA500 arm XL control box receiver unit and photo eye and 2 -7amp batteries
Residential arm style swing gate operator with Extra Large control box and battery backup system
Battery Backup safeguards your property by providing up to 500 cycles* or up to 24 days* of standby power when the power is down.

.......more details

25-42-260

Extension Spring 7' Door - 260 lbs Brown w/ clip

Double - Loop end for strength
25" long 42" stretch 260 lb load
Sold individually
Rated for 10000 cycles

KEYSWITCH019

Manaras Single Key Exterior O/C with Stop Button Return to Center Surface Mount

Cast iron end Tamper-proof

K1D8387-1CC

LiftMaster Expansion Board UL325

Compatible with various LiftMaster® DC Swing and Slide Gate Operators; manufactured after 2016.
This board is backwards compatible for older second generation units but will require UL325 Entrapment Protection System and Photoelectric Sensors or Edge Sensors.

44-60-220

Extension Spring 10' Door - 220 lbs *** By Quote Only

Clipped ends
44" long 60" stretch 220 lb load

22-01184

Truck Door Three Whole Hinge Utility Style

Aluminum Extrusion
Cross Reference: Utility #3-4100-0022

ANGLE-16G

Perforated Angle 1-1/4" x 1-1/4" x 10 ft 16 g Red

10 pieces of 10ft per bundle.

PRO-PL-20053

Micanan Wall Mount Control Panel Mod. Contactor 20" x 16" x 8" Stainless Steel Panel Nema 4/12

Standard features include B2 C2 wiring 24V controls Hinged cover Backplate Primary fuses in panel

K74-MODELH

LiftMaster Main Wire Harness L3

HTLS

Stainless Steel Garage Door Low Headroom Top Bracket 12-Gauge Sold per Piece

Manufactured with Heavy Duty 12ga. Rust-Resistant 304 Stainless Steel
Universal Design.
Fits Most Overhead Sectional Doors
Use for Low-Headroom Doors Only
5-3/4” tall x 2-1/2” wide
Priced Per Each

.......more details

2376.206.30.930

Whiting Torsion assembly .206 wire size 30" spring length 93" shaft

TL-5000

Trailer Lock Lever 32-1/4" long Stainless Steel

Provides leverage to easily open shipping container doors
18-8 Stainless steel construction
Polyurethane coated handle
5.5 lbs.
32-1/4" long
Fits most modern container door handles

.......more details

LVB420-11SF

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details