Devanco Canada - Get The Right Garage Door Opener‎ and Parts

27-20100

Truck Door T-Style Spring Assembly 60" Long

Wire thickness: .24"
Inside diameter: 1.75"
Includes bolt plug and winding plug wound onto spring for stronger design
Cross reference: T#51042 W#2701

65-7WIRE-L

LiftMaster 7 Conductor Control Wire 500ft

20 AWG
Ideal for wiring CPS-RPEN4 photocells

SG10B-24RG-LED

TriLite Stop & Go Traffic Signal 24V LED Black Housing

Red and Green LED traffic light
Approx. size: 11-1/2" High x 6-1/2" Wide x 4" Deep
24 volt DC input voltage only
Long lasting low power consumption
A simple reliable and cost-effective way to reduce accidents around the loading dock.
Available in two colors: safety yellow or black.

.......more details

Installation Instructions Instructions d'installation Wiring Diagram Schéma de connexion

25E10232

Truck Door Mounting Plate for Reefer Top Closure Bracket Black E-coat finish**To Extent of Inventory

Used with reefer top closure brackets 25-10230 25-10231
Black E-coat finish

UCF-1

Self-Aligning Cast Flange Bearing 1" Bore UCF205-16

Grey cast iron painted.
Comes with 2x set-screws 1/4-28
Square 4 bolt

M3-2312

Marantec 2-Button Transmitter 315 MHz 97243/122436

Same as part # 65892 97243 122436
Includes battery CR2032
Made in Germany

Instructions

25-01575

Truck Door Beverage Body Roll-Up Door Cable

Includes one (1) pair of cables
Zinc plated tear drop
Length: 110 inches
Cable eye: 1/4
Cable construction: 7 x 7 galvanized

42-31247

LiftMaster Terminal Block 20A 600V

3-position

29-NP712

Lead Acid Battery 12V 7A

1A3982

LiftMaster Operator Splash-Proof Cover

For models: MH H HCT GH
For wall mounted operators 31" L x 19" W x 18" D assembly required.

Installation manual

50-105

LiftMaster Black Coil Cord 4-Wire 18-ga 20 ft. Extended Curly Cord

975LMC

LiftMaster Laser Parking Assist ** To extent of inventory

Works with Chamberlain (LiftMaster) Garage Door Openers
Easily connects with two wires to the photocell terminals of the opener
The Laser light turns on as you drive into the garage
Simply Adjust the light to a specific spot on the dash

Installation Manual Manuel d'Installation

.243-2-R

Cut-to-Length Torsion Spring .243 x 2" Right Hand Wound White/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

HD-15

Reflector Hood for 3" Round Reflector

Black/Charcoal

7FT-RAIL-BELT

LiftMaster 7' belt drive rail 2777BD - colour code: Grey

Price reflects cost if purchased with an opener

535LMC*

LiftMaster Universal Radio Control Receiver 390 MHz **Replaced by 412HMC

Over 100 billion possible codes makes it impossible to duplicate the frequency
Jumper option for momentary or constant relay contact
Specifically for use with most 3-wire systems without a transformer
Accepts up tp 8 Security+ remote control codes and one keyless entry
Will work with LiftMaster Sears Craftsman or Chamberlain remotes with the yellow LED light - Sec+ format
Will work on 2 or 3 wire systems. If your system is 2-wire a 24-volt 85LM transformer is required

.......more details

CR2450

Maxcell 3V Lithium Button Cell

ME123-YELLOW-U

Miller Edge Yellow Universal Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Installation Manual Worksheet Sell Sheet

ME112-E

Miller Edge Black 2W Non Monitored End Outlet 1-5/16" wide x 1-1/2" high Sold by the Foot

Slide in edge designed for commercial sectional doors and gates.
Retrofits easily to 1" to 1-1/4" sectional doors
Touch sensitive signaling allows for immediate stopping/reversing of motion
For sectional doors: measure the daylight opening of the door or measure the panel width of the door
This gives you the "active length" of the edge - the length to order
Lead wire: 22 gauge univversal

.......more details

Installation Manual Worksheet Sell Sheet

71-B575H

LiftMaster Interior Brake Kit with Cable 575V (Logic 3 4 and early 5 Disc and Pad Models)

Interior mount brake kit for operation with chain hoist
Includes solenoid

Instruction Manual

71-B120

LiftMaster Interior Mount Solenoid Brake 115V

Instruction Manual

T-833-C

FL-Allstar 3-btn 9-Door Transmitter 109023-311 MHz***NLA

This nine channel transmitter controls up to nine doors (open-close) or three doors (open-close-stop).
It has a height switches encoder with three positions: + 0 and - .
Manufacturer's model number: 8833TC (190-109023)
Dimensions: 4 5/8" x 2 1/4" x 7/8"

Programming Instructions

19-48ML

Master Link #48

For #48 chain (#410)
Same as #65 chain

41AB050-2

LiftMaster Electronic Circuit Board Assembly

Assembly includes: Logic board end panel and light sockets
For belt drive models with 2-lights
Also known as 41AB050-2M

41C4398A

LiftMaster RPM Sensor Kit

RPM sensor assembly 1986 - present

Installation Manual_bilingual

41A6102

LiftMaster Power Door Lock

For Jackshaft models

17300

Doorlec DC-3000T3 3-btn Transmitter 313 MHz

One block of 10 dip-switches for programming
Will activate 3 Doorlec 17307 receivers (DC-3000R)
Includes visor clip and 9V battery

Programming Instructions

CP-SW-MIC

Lynx Limit Switch for Commercial Operator with Logic Board

Single limit with curved actuator lever
Switch attaches directly to the Logic 6000 board

14FT-TROLLEY-SET

LiftMaster 14ft Double Angle Rail Set for Comm. Trolley Ops 10-5814-P (2 pcs) *Actual length 203"*

Double Angle Rails for doors up to 14' high
Works with models : MT T GT APT
Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us
Actual Length 16' 11"

7145.96

Whiting Bottom Seal For Coldsaver 96" long

Aluminum retainer sold separately

2234.596

Whiting Coldsaver Bottom Panel 13-1/2" x Max 96" with lock seal and retainer ** Cut to Length

Fits Coldsaver Roll-Up Doors
1-1/8" thick 96" wide
Includes Lock and keeper

111645

Allstar MVP 1-Channel 4-Wire Gate Receiver 318 MHz ***Replaced by P-9931R-4F

One channel
4-wire operator connection
Wire whip antenna with "F" connector
Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
Power: 24 VAC/VDC
Codes: 19683

.......more details

Programming Instructions

MDR

Linear 1-Channel MegaCode Receiver 318 MHz *** Discontinued

Activates one device
Wire lead antenna
Mounting bracket supplied
Memory: storage for up to 10 MegaCode transmitters
Power: 24 VAC/VDC
Codes: 1000000+ (MegaCode format)

.......more details

Programming Instructions

8833TC

Allstar 3-btn 9-Door Transmitter 109023 318 MHz ***Replaced by P-8833TC

Open/Close remote for 9 doors
Compatible Allstar and MVP receivers
Portable transmitter
Easy access to battery and coding switch
Slide switch selects door trio to operate
Power: 9-volt battery

.......more details

Programming Instructions

220205-02

Linear Complete Hardware Kit for LDO LSO LCO

Includes all the hardware needed to install the operator in its entirety.
Includes the rail hardware (door bracket and header bracket) and hardware for installing the safety beams.

4010-6FT

Aluminum Retainer only for Light Brush 6' Long 180 degree

For angle application (180 degree)
For use with Light Brush or Vinyl Insert

4001-6FT

Aluminum Retainer only for Light Brush 6' Long 45 degree

For angle application (45 degree)
For use with Light Brush or Vinyl Insert.

1005-1-1/2-16'

Aluminum Bottom Retainer U-Shaped 16' Long

For door thickness 1-1/2"

1003-2-16'

Aluminum Bottom Retainer L-Shaped 16' Long

For 2" thick doors.

1003-1-3/8-8'

Aluminum Bottom Retainer L-Shaped

For 1-3/8" thick doors.

BLOCK-YELLOW

Spring Repair Blocks .3175-.3625 Pair

For the temporary repair of a broken spring.
Wire size: .3175 - .3625

1104-18FT-SAND

Residential Side & Top PVC Weather-Strip with cap 18' Long - Sandstone (D)

Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Taupe

1001-8-BLACK

Commercial Side & Top Weather-Strip 8' Long - Black

Aluminum retainer with black dual-fin vinyl

32-48-120

Extension Spring 8' Door - 120 lbs Green *** Replaced by 27-48-120

Double - Loop
32" long 48" stretch 120 lb load
Springs sold individually

Spec Sheet

25-42-220

Extension Spring 7' Door - 220 lbs Green w/ clip

Double - Loop
25" long 42" stretch 220 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

DM54

Cable Drum High Lift 54" 5250-54 Pair

54" High Lift aluminum die cast alloy.
3/8"-16x2" hardened cup point set screws installed with red heads.
Color coded: Red-LH and Black=RH.
Maximum High Lift: 54" Maximum Door Height: 180" + High Lift
Rated lift per drum: 500 lbs 1000 lbs per door max
Maximum cable diameter: 3/16"

.......more details

26-14523

Truck Door Intermediate Panel (13" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

26-14325

Truck Door Bottom Panel with Seal (15" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish
Comes only with bottom retainer and seal (installed)

25-60052

Truck Door Latch Plate for Whiting Roll-Up Doors

Steel construction Plain finish
Contoured for proper lock engagement
Cross Reference: W #2804

Z9403

Coupler 1" Bore Adjustable Silver

Malleable Iron for strength
Set screws and jamb nuts installed
1" bore with 1/4" keyway
Thickness: 0.35"
Painted silver

H11G11

Hinge #11 x 11 gauge

11 gauge # 11 hinge - 0.93 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

H11G03

Hinge #3 x 11 gauge

11 gauge # 3 hinge - 0.72 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

H11G02

Hinge #2 x 11 gauge

11 gauge # 2 hinge - 0.69 lbs
Bright zinc-plated
For use with 7/16" stem rollers

CB3160500

Cable 3/16" 7x19 500' Galvanized

Galvanized cable 3/16" 7x19 500ft spool.
Cable break strength: 4200 lbs

Comparison charts

RS1039

Roller 3" Steel 9" stem 10 ball - To Extent of Inventory. Replaced by RS1039-C

Steel Roller Wheel diameter: 3"
Working length: 8.5"
Overall length: 9.64"
Box qty: 60 Box weight: 49.6 lbs (3-9-10 Steel)

25-10200

Truck Door Top Bracket Assembly for Todco Roll-Up Doors

Steel construction Zinc plated
Heavy-duty design
Assembly includes: Base Slide Bolt & Washer
Cross Reference: T #69433 W #4039

MK-00100

Micanan Transformer 575V-110V-100VA

37557R

Genie Chain Drive Bullet Assembly

This Genie chain drive bullet assembly is the white piece that holds the chain for the garage door opener together.
Works with chain model Genie garage door openers that have a C-Channel rail.
The chain carriage assembly for these models also attaches to this chain bullet assembly allowing it to move the garage door open and closed up and down the rail.
Assembly contains: The 2 Bullet side white pieces and the four screws to install it
Compatible with Genie models that have a chain rail: 1028 2028 3020H 3020H-B 3024 4024 3022 3042 3120H 3120H-B 4022 4042 4124 4164 (ChainMax ReliaG IntellG and TriloG series with these model numbers)

AW-14

Miller Edge Air Wave Switch in ABS Box

Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
Molded enclosure
Applications: commercial sectional doors rolling doors and mass transit
Works on doors up to 60ft
Can be used with standard pneumatic hose and Miller Edge extrusion
Sensitivity: 2mm to 500mm

.......more details

Instructions Manual Sell Sheet

9150000628

5/32" Stops ONLY 100/pkg

Stops only - 100 per pack

VFOH5011

LiftMaster Variable Speed Front of Hood Op. 1/2 HP 120V with CPS-U

Front of Hood Mount for Rolling Steel Doors and Grilles.
Variable speed up to 12”/sec with smooth start/stop feature.
Floor level controls with intuitive menu driven interface.
Accepts: (30) 3-Button Remote Controls or (90) 1-Button Remote Controls
Accepts an additional 30 Wireless keypads and Unlimited Dip Switch remotes
Includes: 1 x Powerhead (with 16.5 ft. Integrated Hoist Chain) 1 x Controller 1 x Powerhead Mounting Bracket with Hardware 1 x VFD Cable (22 ft. Standard) 1 x Encoder Cable (22 ft. Standard) 1 x #50 Drive Chain 1 x 40-Tooth Sprocket 1 x LiftMaster Monitored Entrapment Protection (CPS-U Standard

.......more details

27191A

Genie Opener Sprocket 10 Tooth

10 Tooth Sprocket.
For Chain Drive Models: IC250 IC250B PMX60 PMX65 PMX75 PMX80 PMX85 PMX300-IC/A PMX500IC/A PMX300IC/B PMX700 PMX1200 GPS700 GPS1200-IC.

28020004-500

Cable Stainless 1/16" 1x19 500' Inox *** Price on Request

Not for use in aircraft applications
1x19 contruction type 302 / 304

Comparison charts

720118

FAAC Latching Plastic Enclosure

Dimensions: 4.65" x 8.38" x 0.6"

HAE00047

Linear Complete Gear Set with Grease

Set includes: Helical gear worm gears and grease
Helical gear measures 2-7/8" diameter

39-10541

LiftMaster Clutch Disc for SL595 (K39-10541)

25-10402

Truck Door Pull Strap (15.5") with Zinc Retainer for Roll-Up Doors

Durable 2" wide black nylon construction for added strength and durability.
Custom lengths available
Cross Reference: 257000

DM54LC

Cable Drum High Lift 54" 400-54HL Pair

54" LC High Lift-LD Aluminum die cast alloy.
3/8"-16x2" hardened cup point set screws installed with red heads.
Color coded: Red-LH and Black=RH. Maximum High Lift: 54"
Maximum Door Height: 120" + High Lift
Rated lift per drum: 275 lbs 550 lb per door max
Maximum cable diameter: 5/32" max

.......more details

CHW401-T/FORCE

Chain Hoist Wall Mount 4:1 2000R Torque Force (126654)

4:1 Reduced drive
Sprocket: 41B36 Bore: 1"
Includes: 26ft of hand chain 1/4" square key chain keeper and 3.6ft of #41 roller chain included with sprocket wheels.
Cross Reference: 2000R OMI 4006

Drawing Sell sheet

1461-LCN

LCN Door Closer with Regular Arm and PA Bracket

Aluminum finish
Can be used for both commercial and institutional applications
Can be mounted on either left or right swinging doors
The spring power of a 1461 cylinder is field adjustable from size 1 through size 6 and is shipped adjusted to size 3.

RL44-40

Direct Burial Loop 6' x 16' Loop with 40' Lead-In

Used for installations under concrete asphalt pavers or in gravel roads.
The loop can be tied directly to the rebar before concrete is poured.
Wire is designed for a direct burial application.

R5115

Bearing 1" Commercial with Flanged Retainer Football Style

1" Commercial bearing pressed in a Flanged Retainer Football Style
Type: Steel Bore: 1"
Inner Race Offest: 13/64"
Rated Load Cycles: 250 lb @ 10000 cycles (8')

2806.156.195

Whiting .156 x 2-3/16 x 19.5" Roadside with Cones

WKP5LM3

LiftMaster Wireless Keypad 5-Code ** Replaced by KPW5

Wireless access control keypad
Same features as WKP250LM3
5 code capacity - 4-digit codes
2-way design with confirmation beep
900MHz

Programming Instructions

SETR2641AM2KH

Erone 2-Channel Mini Transmitter with HID Tag Black 433MHz

With built-in HID tag
Heavy-duty construction
Elegant & easy to carry
Unobstructed range: 656 ft (200m)
60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
Two lithium batteries (CR2016) included

.......more details

Wireless System Chart

K001D8075-1

LiftMaster Logic Board - L5 ** USE K001D8395

14D1279E

Programming Instructions Instructions de programmation

112631.0001.S

Overhead/Genie Logic Board

MSJ-6534-M-N1-RH

Manaras MSJ 1 HP 600V 3Ph Monitored Board w/N1 Eyes RH

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
35 cycles per day > 150 cycles per day

.......more details

LB610-102

Laminated Bumper Standard Black 102" x 10" 6" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

27120-575V

Doorlec Electric Motor 1/2HP 575V 3PH DC221

5-30-9

3" Vertical Track 12-GA 15'-3" (16' door) Sold per Pair

Pierced track

3257

Whiting General Purpose Bottom Seal #80841

Quote required prior to sale to ensure correct fit

CP-LEV-BRAKE

Lynx Brake Lever

DC300-CABLE-P/FT

Dyna-Hoist 5-Conductor Cable Sold per Foot Increments of 5ft- Max 25ft

Sold in increments of 5ft to a max of 25ft

MC271-2W-RH-BLK

Miller Edge MC271 2-Wire Non-Monitored Right Hand Black Includes End Flaps - Sold per Foot

Ideal for Cornell double angle bottom bar
Flexible and will conform to floor irregularities
Optimum size for 2+ inch thick surfaces
Custom manufactured to user specifications for color length and outlet location
5-inch end flaps create a complete seal and can be trimmed for custom fit
Sealed assembly impervious to dust and debris

.......more details

TS-1-111-GALV-KEY

Tube Shaft 1" x 111 (9'.25) Galv w/KW 1/4" x 3/8"

When ordering order one foot longer that actual door width
Comes with 3 keys 1/4-3/8-3'' long

OSH-6232-M-N1-LH

Manaras Opera-SH 1/2 HP 208V 3 Ph Monitored ECB w/N1 Photoeyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"

Installation Manual

TDC48-08

LiftMaster Trolley Chain Pack #48 700LBS 8ft Door

Chain pack only
TDC48-08 is a #48 Chain Pack Kit for 8 Ft. Trolley Rail Assemblies.
For use with LiftMaster® MAXUM TDC 700 Series Standard-Duty Trolley Commercial Door Operators; installed on 8' commercial doors.

GALV-312-258-R

Cut-to-Length Torsion Spring .312 x 2-5/8" Right Hand Wound Galvanized Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED
Galvanized

GALV-250-334-L

Cut-to-Length Torsion Spring .250 x 3-3/4" Left Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-334-INSTALLED

T/F-H/CHAIN-YELLW

Canimex Hand Chain 31.4 Yellow Zinc Plated Sold by Barrel Only 1000ft 173772

Yellow Zinc Plated Steel 31.4-19-4.55 sold in 1000' barrel
For use with specific Torque Force chain hoists ie 200R (244687)
This chain will NOT work in the hoists that use the 30.7-19-5 chain
works with Micanan / Nice Commercial operators

10FALCON-EXXL100

BEA Falcon Motion Detector w/Exp Proof Housing 100ft Cable Mount 6.5' to 11.5'

FALCON EX combines a microwave activation sensor with an explosion-proof / flame-proof housing
Ideal for use in unique environments such as chemical manufacturing petroleum refining and agriculture.
FALCON EX can be mounted from 6.5' to 11.5' to fit any industrial application.
Nema4/IP66
Detection Zone: Falcon EX XL: 13’ × 6 ½’ @ 8 1⁄5’
Oerating termperature: -22-140F

.......more details

GALV-243-258-L

Cut-to-Length Torsion Spring .243 x 2-5/8" Left Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-262-334-L

Cut-to-Length Torsion Spring .262 x 3-3/4" Left Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

GALV-234-258-R

Cut-to-Length Torsion Spring .234 x 2-5/8" Right Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

Q061

LiftMaster Cludge Arm Clamp and Handle K75-50121

Compatible with various LiftMaster® Swing Gate Perimeter Access Systems

R2T

Erone Radium Mini 2-Button Transmitter 433MHz

The RADIUM remotes are compatible with all standard 433 MHz RADIUM wireless receivers.
They have been designed with a high security coding system (KeeLoq® Hopping code).
A special algorithm ensures a continuous synchronization between the receiver and transmitter
Range up to 820 ft (250 m)
Two CR2016 batteries included