Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Side & Top
MD00044

Micanan Spur Gear 12B60

101475

Insert Bearing 1-1/4" Bore SB206-20

UCFL-1-1/4

Self-Aligning Cast Flange Bearing Football Style 1-1/4" Bore UCFL207-20

  • Grey cast iron painted.
  • Comes with 2x set-screws
  • Football style 2 bolt
  • 5-1/8" hole center to hole center distance
  • 3500 lbs load rating
K72-33192

LiftMaster Limit Shaft Kit NEMA 4 & 4X for H J HJ GH GT T & APT Operators

  • For: NEMA 4 & 4X for H J HJ GH GT T & APT Operators
  • Shaft measures 12" in length
  • Compatible with Logic 4 and Logic 5 operators
K20-1050B2LPH24

LiftMaster Electric Motor 1/2 HP 115V 1Ph Logic 5

  • Standard 1/2 hp motor for new L5 operators
MOTOR275

Manaras Electric Motor 1HP 208/460V 3PH

  • Continuous-duty base mount
  • This item is compatible with BRAKE011
27-8004-K

LiftMaster Aux. Contact Block Relay

  • 2-NO/ 2-NC Contacts
  • Used on 03-8024K contactor
MK-00511

Micanan Resistor 330 OHM 5Wc/w Leads (For Motor)

.393-6-R

Cut-to-Length Torsion Spring .393 x 6" Right Hand Wound Orange

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.393-6-L

Cut-to-Length Torsion Spring .393 x 6" Left Hand Wound Orange

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
ME111-2L-T2

Miller Edge Black Left Hand Outlet Monitored 7/8" wide x 1-1/2" high Sold by the Foot

  • Slide in style edge for barrier gate and counter shutter application.
  • Touch sensitive signaling allows for immediate stopping/reversing of motion depending on application. •10K ohm resistor •Temperature Range: -30F to 155F
  • Lead wire: AWM 22 gauge 2ft length
  • Sensitivity: nominal 6-8 PSI
  • Vertical or horizontal mount
  • ANSI/UL325 recognized component
    • .......more details
Installation ManualWorksheetSell Sheet
20456R

Genie Pulley Support Kit *** No Longer Available

  • Front metal clip with pulley
  • Front idler for use with Genie and Overhead Door T-rail systems
RA-AD-WWS-MULTI

Lynx Wireless Wall Station AD455 372 MHz

  • Wireless for easy installation anywhere
  • Controls door open-close light on-off
  • Programmable pet opening (Opens to a pre-selected height of 6"-30")
  • Vacation Slide-Lock: Disables remote transmitters keyless entries and wall stations.
  • 10-second closing safety delay
  • Transmitter program button
    • .......more details
Programming InstructionsCompatibility chart
PHOTO-038

Manaras Non-Monitored Photoelectric Cells Nema 4/4X/6P/12/13 Retro-Reflective

  • Retro-Reflective
  • 24Vac 30' range
  • Includes 3" reflector
22306

Programmable 7-Day / 24 Hr Timer

DF104.2

Whiting Dry Freight Door 3/4" with Track Balancer and Standard Hardware

  • Standard features include: 2-cable balancer with independent springs
  • Balancer springs treated with rust preventative
  • All door hardware is E-coated
  • Spring loaded lock catch
  • Heavy-duty 2" 13-gauge track
  • Stainless steel aircraft cables
    • .......more details
MARED12

LiftMaster Red LED Light Stip 9.9ft Long ** Discontinued

  • Provides LED visibility on both sides to 12 ft. arm.
MT-1B

Linear 1-btn MegaCode Block Coded Transmitter 318 MHz

  • Compatible with all Linear access receivers and controllers
  • Superior transmission range
  • Operate LED
  • Visor clip included
  • Sold in lots of 10
  • Power: 9-volt battery
    • .......more details
15-50B35QGH

Sprocket 50B35 1-1/4" Bore 1/4" Keyway

H105L5-RH

LiftMaster Ind. Duty Hoist Op. 1 HP 575 VAC 3 Ph Logic 5 Right Hand W/Brake

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'installationSell sheetBrochure
MI00003

Micanan Pocket Wheel for PRO-H/HB/LH

  • Comes with 3/4" bushing and 2 1/4" spring pins
OSH-6233-CONT-L

Manaras Opera-SH 3/4 HP 208V 3 Ph Contactor Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation ManualSell Sheet
.363-6-R

Cut-to-Length Torsion Spring .362 x 6" Right Hand Wound Green/White

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
4X16SC50

Devanco Loop 4' x 16' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
26-945255

Truck Door Intermediate Panel (15.5" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
CP-LX225

Lynx Enhanced Relay Board

41B591

LiftMaster Replacement Battery Kit for 475LMC 2/pk

  • For 475LM Battery Back Up Units only
  • Used only on the following LiftMaster models: 2500 3500 3800 & 8500
K75-12586

LiftMaster Complete Brake Assembly GH 575V

  • Complete assembly includes: Brake hub kit Brake release lever Brake disk Spring cup Studs Compression springs Brake solenoid Solenoid cover Spacers Mounting plate Pressure plate Feather key and Fastener.
Installation ManualManuel d'installation
1007-1-5/8-12

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick

  • For door thickness of 1-5/8" to 1-3/4"
OSH-6114-CONT-R

Manaras Opera-SH 1HP 120V 1Ph Contactor Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation ManualSell Sheet
7001-WG-16-CO

Residential Wood Grain Side & Top W/S Cherry Oak 16' Long - Painted Screws to Match

  • Cherry Oak retainer with Cherry Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
    • .......more details
1013-1-1/4-10

Rigid Vinyl Bottom Retainer L-Shaped 10' Long

  • For door thickness: 1-1/4"
6X20SC50

Devanco Loop 6' x 20' Saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • Requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
26CW94522

Truck Door Intermediate Panel (12" x 98") Painted White for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
TC134-14

Top Cap 1-3/4" 14 ft Black Box Qty Only ** To extent of Inventory

  • Sold in box quantities only
  • 12 pieces per box
TC134-8

Top Cap 1-3/4" 8 ft Black Box Qty Only ** To extent of Inventory

  • Sold in box quantities only
  • 12 pieces per box
71-B1PH

LiftMaster Internal Brake Kit w/Solenoid 120/240V 1PH for L5 Operators

  • Works with Logic 5 commercial operators and SL585/SL595 U and UL gate operators
UCP207-20

Precision Pillow Block Bearing 1-1/4" Bore

  • 6-9/16" overall length
  • 5" hole center to center distance
OPH-6112-CONT-L

Manaras Opera-H 1/2HP 120V 1Ph with Mechanical Contactor Left Hand

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
  • 25 cycles per hour 100 cycles per day
    • .......more details
Installation ManualSell Sheet
CB18A500-KOR

Cable 1/8" 7x7 500' Galvanized Supreme

  • Galvanized cable 1/8" 7x7 500ft spool.
  • A higher quality cable than the Chinese cable.
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
Comparison charts
105104

Linear Gate Safety Edge Transmitter

  • 105104 is for adding obstacle sensing for motorized gates or barrier arms.
  • Using a safety edge transmitter is more economical and discrete than the traditional coiled cord connection method.
  • The transmitter mounts directly on the gate or barrier arm and wires to a standard exterior safety edge sensor.
  • Compatible with 310 MHz Stanley receivers and Model 109950 302850 and 309013 receivers.
  • Activates receiver for stop or reverse entrapment
  • No cables or coiled wires
    • .......more details
Installation Manual
K20-1050B-2LP

LiftMaster Electric Motor 1/2 HP 115/230V 1Ph L3 L4

  • Standard 1/2 hp motor
24-MAG-STRAP

Magnetic Hinge Strap 24" Black Set of 4

  • Decorative hinge strap only.
  • Black flexible magnetic material with deep embossed design
1104-ASFT-16FT

Elton Aluminum Stiffener for 1104 16ft

  • Prevents the 1104 from buckling in the hot sun
HDC-411-RH-CONT

Lynx Ind. Jackshaft with Hoist 3/4Hp 115V Contactor Right Hand

  • 1/2 3/4 1HP 115-230-460 or 575V single or three phase motor capacitor start overload and under voltage protection.
  • Solid state circuit board Lynx-6000. Built in 1.5 second delay.
  • 5L V-belt primary reduction #50 drive chain and sprockets.
  • Adjustable friction clutch magnetic solenoid brake.
  • Precision pillow block bearings on output shaft.
  • Fully driven adjustable limit switches.
    • .......more details
Sell Sheet
SBPFL205-16

Pillow Block Flange Bearing Football Style 1" Bore SBPFL205-16

OVERLOAD002

Manaras Telemecanique Overload 3-ph 1.2 - 1.8A

  • Telemecanique # LR2K0307
GUIDE014

Manaras Chain Guide

26-40045

Truck Door Offset Bottom Seal 98" Long for Whiting Dryfreight Doors

  • Co-extruded using rigid PVC backing with flexible PVC seal.
  • To be used with the offset U-channel retainer only (26-40037 or 26-40039)
26-40029

Truck Door U-Channel Seal Retainer 98" Long for Whiting DryFreight Doors ** To Extent of Inventory

  • Aluminum extrusion construction
  • For use with Bottom Seal #26-40027
MAW123-BLK-LH

Miller Edge Air-Wave Edge Black Sold per Foot

  • This pressure sensitive air-wave edge can be adapted to suit a wide variety of applications.
  • When touch activated the MAW123 sends an immediate pulse of air through the extrusion to an air-wave switch which sends a signal to controls to stop and/or reverse operations.
  • It has been designed to fit most doors with double track bottom retainers.
  • With appropriate mounting channel this edge will fit nearly all doors from 11/2" to 2" thick.
  • The MAW123 is resistant to flame water and most common greases and oils.
MK00488-NM

Micanan Electronic Circuit Board Non-Monitored

  • Replacement board for PRO-LH (50-11)
  • Board does NOT have terminals P1 & P2
  • Up to 20 transmitters can be programmed
Instructions Manual
MO00001

Micanan Cam Plate Compression Spring (.178 ID)

  • 2 required per operator
  • .178 ID x 032G x 55L)
MK00737

Micanan Feature Circuit Board with Contactor Interface Non-Monitored 575V **use MK00642-NM

  • For all HP - 575V all voltages 1.5 2 3 & 5HP
  • Non-Monitored
Instructions Manual
412001

Linear 2-Channel Multi-Code Visor Transmitter 300 MHz

  • Compatible with 300 MHz Multi-Code receivers
  • Supplied with visor clip
  • Easy access to battery and coding switches
  • Power: 9-volt battery
  • Codes: 1024 (set by dip switches)
  • RF frequency: 300 MHz
    • .......more details
Installation Manual
2235.296-CUT

Whiting Coldsaver Bottom Panel 14-1/2" x 94-3/4" with lock Topcoat Long Pull Strap & SS package

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide
  • Includes Lock and keeper
GH4416-07-L

Green Hinge #7 12-ga Left Hand *** to extent of inventory

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
GH4416-05-R

Green Hinge #5 12-ga Right Hand *** to extent of inventory

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
GH4416-04-L

Green Hinge #4 12-ga Left Hand *** to extent of inventory

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
K23-19380

LiftMaster Reset Switch for LA400

30B530

LiftMaster Capacitor 56uF 220V ** discontinued

  • Same as LiftMaster # 30B620
18FT-TROLLEY-SET

LiftMaster 18ft Double Angle Rail Set for Comm. Trolley Ops (2 pcs) *Actual length 251"*

  • Double Angle Rails for doors up to 18' high
  • Works with models : MT T GT APT
  • Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us
3007-0

Elton Telescopic Door Handle / Foot Plate Black

  • For door thickness: 1-3/8" - 2"
  • Black polyethlene
  • Cut-out size: 6-3/8" x 3-5/8"
27-48-380

Extension Spring 8' Door - 380 lbs Gold

  • Single - Loop
  • 27" long 48" stretch 380 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
27-48-220

Extension Spring 8' Door - 220 lbs Green with clip

  • Single - Loop
  • 27" long 48" stretch 220 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
27-48-280

Extension Spring 8' Door - 280 lbs Gold

  • Single - Loop
  • 27" long 48" stretch 280 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
27-48-160

Extension Spring 8' Door - 160 lbs Brown

  • Single - Loop
  • 27" long 48" stretch 160 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
H12G04-SS

Hinge #4 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
K94-36411

LiftMaster Piezo Alarm

  • For LA400DC
ME120-BLK-E-4FT

Miller Edge 2-Wire Black End Outlet 4 ft Long

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualSell Sheet
MP00015

Micanan Up-Charge Track and #410 (#48) chain for 16' h Door *Actual length 222"*

  • For 1/3 HP and 1/2 HP operators only
MP00016

Micanan Up-Charge Track and #41 chain for 16' h Door *Actual length 222"*

  • For 3/4 HP and 1 HP operators only
5X20SC50

Devanco Loop 5' x 20' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
39-10167

LiftMaster Clutch Disc for MH

41D7924-1

LiftMaster Extra Door Sensor for 821LM First Generation **to extent of inventory

  • Liftmaster Chamberlain 041D7924-1
  • Required to add a second garage door opener to your 821LM MyQ Garage.
  • Works on the Liftmaster 821LM and Chamberlain MYQ-G0201
  • Compatible with:
  • Green Learn Button (Billion Code 390MHZ)
  • Models: 1245 12551270 1280
    • .......more details
K75-12492

LiftMaster Brake Kit 115V Units MH

M005

Rolling Steel Groove Mouth GM6789 Fire Door

4JW-RIGHT

Rolling Steel 3" Curved Cast Windlock 273004 RH

  • Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
  • A wind lock is a small metal device that is attached to each slat.
  • Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
  • When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
  • With a windlock your door can operate efficiently despite wind load or pressure.
  • Windlocks are easy to add on to any existing rolling steel or shutter door
    • .......more details
4J

Rolling Steel 3" Curved Cast Endlock

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
17K

Rolling Steel 2" Flat Continuous Cast Endlock

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
17JW

Rolling Steel 2" Flat Cast Windlock

  • Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
  • A wind lock is a small metal device that is attached to each slat.
  • Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
  • When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
  • With a windlock your door can operate efficiently despite wind load or pressure.
  • Windlocks are easy to add on to any existing rolling steel or shutter door
    • .......more details
2G-RIGHT

Rolling Steel 2" Curved Stamped Endlock Right Hand

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are at both ends of every slat.
  • Rivets included with endlocks
SLT14-20P

Rolling Steel 3" Flat Slat 20-ga Primed

SLT14-20

Rolling Steel 3" Flat Slat 20-ga Galvanized

340.115-CUT

Whiting Top Panel Tongue & Groove 11-1/2" h Cut to Exact Length

  • Primer only
  • Customer to specify exact length
342.115-CUT

Whiting Intermediate Panel Tongue & Groove 11-1/2" h Cut to Exact Length

  • Primer only
  • Customer must specify exact length required
342.155

Whiting Intermediate Panel Tongue & Groove 15-1/2" x 96" Price on Request

  • Standard size panel primer only
GH155-L5

LiftMaster Gearhead with Brake 1-1/2 HP 575V 3P L5

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
.306-5-1/4-RH-C

Torsion Spring .306 x 5-1/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .306 ID: 5-1/4" Length: 12 ft
.295-2-LH-C

Torsion Spring .295 x 2" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .295 ID: 2" Length: 12 ft
.250-2-5/8-LH-C

Torsion Spring .250 x 2-5/8" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .250 ID: 2-5/8" Length: 12 ft
.243-2-5/8-RH-C

Torsion Spring .243 x 2-5/8" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .243 ID: 2-5/8" Length: 12 ft
.234-2-5/8-LH-C

Torsion Spring .234 x 2-5/8" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .234 ID: 2-5/8" Length: 12 ft
RN0024-SS

Roller 2" White Nylon 4-1/2" Stainless Steel Stem Double Sealed Bearing

  • A supreme double sealed bearing roller that never requires lubrication
  • Ideal for high usage and high moisture areas ie..carwash
  • 7/16" stainless steel shaft.
  • 200 lb load 50000 cycles
  • UHMW tire
DF090.2

Whiting Dry Freight Door 3/4" without Track or Balancer

  • Original Whiting dry freight replacement door for serial # 99164
K33-51206-315

LiftMaster Radio Receiver Board Elite **DISCONTINUED

  • Fits the Miracle-One gate operator
.331-334-L

Cut-to-Length Torsion Spring .331 x 3-3/4" Left Hand Wound Red/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
BK311

Jamb bracket J-11 #11 12 gauge

  • Sold by the piece
  • Height 4.75" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
BK310

Jamb bracket J-10 #10 12 gauge

  • Sold by the piece
  • Height 4.50" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
BK304

Jamb bracket J-04 #4 12 gauge

  • Sold by the piece
  • Height 3.00" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.