Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login

UTIL013

Utility Switch Roller Lever Arm *** No Longer Available

  • Telemecanique # ZCKY-41
178B34

LiftMaster Straight Door Arm

  • Will work with most residential garage door openers
  • Also known as: 012385041783 178B33 178B34 4178B0034B
26-14623

Truck Door Top Panel (13" x 98") for Todco DryFreight

  • These panels are cut to an extra wide width to fit wider vehicle applications
  • Interlocking tongue and groove design for weather-tight joint and proper alignment.
  • .75" thick 7 ply exterior grade medium density plywood
  • Primer finish
26-14625

Truck Door Top Panel (15" x 98") for Todco DryFreight

  • These panels are cut to an extra wide width to fit wider vehicle applications
  • Interlocking tongue and groove design for weather-tight joint and proper alignment.
  • .75" thick 7 ply exterior grade medium density plywood
  • Primer finish
DT-312

Linear 1-btn Delta3 Transmitter 312 MHz *No Longer Available*

  • Activates one Delta-3 receiver
  • Test/operate LED
  • Visor mounting clip supplied
  • Power: 9-volt battery
  • Codes: 256 (set by dip switches)
  • RF frequency: 312 MHz
  • .......more details
20235R.S

Genie Replacement Keypad Only with Ribbon

  • Replacement keypad for KEP-1
41D216

LiftMaster End Panel with all Labels and Light Socket

  • End panel that goes on model 8355
  • For the circuit board order 45ACT
41A6408

LiftMaster Travel Module (98022 8500 3800P 3800PLD & 3900) - 41B8861

  • Works on model 8500
41C168

LiftMaster Transformer

  • For model 8500
  • 120V / 150 VA
  • 24VDC output voltage
  • Also known as 41C0168 041C0168
7001-18-CREAM

Commercial Side & Top Weather-Strip 18' Long - Cream (C)

  • Cream galvanized steel with cream dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Almond
  • Full case quantity only (10)
7001-14-CREAM

Commercial Side & Top Weather-Strip 14' Long - Cream (C)

  • Cream galvanized steel with cream dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Almond
  • Full case quantity only (10)
7001-9-CREAM

Commercial Side & Top Weather-Strip 9' Long - Cream (C)

  • Cream galvanized steel with cream dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Almond
  • Full case quantity only (20)
7001-7-CREAM

Commercial Side & Top Weather-Strip 7' Long - Cream 7001-CC (C)

  • Cream galvanized steel with cream dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Almond
  • Full case quantity only (20)
GTS-16

Garaga Top Seal Single-Fin Black 16ft ** To Extent of Inventory

  • Thermoplastic resin weatherseal co-extruded.
  • For Commercial / Residential applications
  • Screws directly to the top of door no retainer required
111854.0002

Overhead Logic Board for RSX 3/4 & 1 HP 1PH

  • Description: KITPCB1PH3/4-1HPSX/HXUL10
  • For RSX ad RHX models 3/4 & 1 Hp Single phase operators
41AC175-2

LiftMaster Electronic Circuit Board Assembly

  • For Sears / Craftsman garage door opener
3X6PO50

Devanco Loop 3' x 6' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
K74-16420

LiftMaster Limit Switch Kit for LGO **DISCONTINUED

37024R

Genie Rail Extension Kit for 8' Doors GBLX-8***No longer available***

  • Compatible with Quiet Lift 800 DC Belt Drive models.
  • To be used in addition to a 7' (3-piece) rail to accommodate an 8' high door.
9150000670

Extension Cable 1/8" 7x7 14' Sold as a Pair

  • Cable assembly for extension spring door - looped one one end the other is raw (no stops)
753

Fasteners Self Drill & Tap Tek Screw 1/4-20 x 1" (#3PT) 1000/Box

  • Indented Hex Washer Head
  • 7/16" Head
  • Max RPM = 2000
  • #3 point = long cutting edge (less thread)
1104-9FT-CHARCL

Residential Side & Top PVC Weather-Strip with cap 9' Long - Charcoal (H)

  • Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-7FT-CHARCL

Residential Side & Top PVC Weather-Strip with cap 7' Long - Charcoal (H)

  • Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
MK00785-RATED

Explosion Proof Killark Labeled 3-Btn Pushbutton Control Station

  • CSA and UL labeled station
  • Three button O/C/S Nema-7/9
  • Surface mount
HOMELINK-REPTR

LiftMaster HomeLink Repeater Kit ** same as 855LM

  • All 2006 or older vehicles require a repeater kit installation
  • In 2007 and newer if the HomeLink does not program with opener install a repeater
  • The remote supplied in the repeater kit must be kept for future programming and is NOT to be used as a garage door opener remote
1104-12FT-GREY

Residential Side & Top PVC Weather-Strip with cap 12' Long - Grey (G)

  • Grey rigid vinyl retainer with grey flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
CONSD24V

Reversing Contactor Struthers Dunn 24V

  • Struthers-Dunn # A275KXX90
1005-2-12'

Aluminum Bottom Retainer U-Shaped 12' Long***Actual Length 12'2"***

  • For door thickness 2"
RPEN4-RFLCTR

LiftMaster Reflector with Support Housing

  • Replacement reflector for the CPS-RPEN4 photo-eyes
SPR41B60X1

Sprocket 41B60 for a 1" Shaft

PULLEY014

Manaras Motor Pulley Standard 2" x 5/8" 5L/B

K72-19979

LiftMaster Clutch Shaft Kit 2005 +

  • Assembly includes: Clutch shaft keyed flange bearing dual sprocket 32/14 14-tooth sprocket E-ring compression sprocket chain wheel assembly pulley assembly chain guide assembly shim & thrust washers copper bushing 12-10882 and roll pins
27-20112

Truck Door W-Style Spring Assembly CurbSide 33" Long

  • Wire thickness: .182
  • Spring length: 33 inches long (assembled length)
  • Inside diameter: 1.188
  • Includes cable drum and bearing assembly winding cone wound onto spring for stronger desgn and internal spring spacer.
G90-503000

LiftMaster Non-Resettable Counter 24VAC (50-12862)

  • Increases one number each time current is applied
  • Connects to the 24 volts of contactor coil
  • Simple 2-wire connection
  • Same as 50-12862
480LM

LiftMaster Alternate Mounting / Extension Kit for 3800 3900 8900W 8500 8500W

  • Enables the opener to be lowered due to obstructed areas and low ceilings
  • lowers the operator by 6" requires 1-1/2" above the door shaft
  • Installs quickly and easily
  • Same as 480LMB
  • Compatible with wall mount opener 98032 and 98022
PROMI-500

Erone 1-Door Stand Alone Card Reader / Keypad **DISC

  • 500 users (proximity badges and/or codes)
  • 3 operating modes: - Mode 0: badge and code - Mode 1: badge only - Mode 2: badge or code
  • Audible & Visual feedback
  • 1 request-to-exit input
  • Tamper switch
  • 1 form C door relay output (3A/125V)
  • .......more details
1010-PER-FOOT

Replacement Sweep for One-Piece Door Grey Vinyl

  • Fits into the bottom of one-piece 'Stanley' doors.
  • Sold per foot
  • 2" wide
41C2735

LiftMaster Chain and Cable Assembly CMC84

  • Fits a Sears Craftman CMC84 operator
MD-00007

Sprocket 41B12 1" Bore 1/4" Keyway 2 SS 5/16"

510.3920.06

Whiting Stainless Steel Rivets Option for Dry Freight Door 4-Rows of Hinges 6 Panels

  • Upgrade option
75424

Marantec Universal Receiver / Remote Kit 315 MHz

  • Universal receiver kit includes one plug-in radio receiver and one M3-2312 remote control transmitter
  • Universal receiver plugs directly into the wall outlet
  • Same as part # 73870
  • Made in Germany
65853

Marantec Programming Wire - Old ML to New M3

  • Used when programming old style remotes to the newer style 3 series remotes and Wireless Keypads.
M3-2314

Marantec 4-Button Transmitter 315 MHz 97244/122468

  • Same as part # 65893 and 97244
  • Visor mount
  • Includes battery CR2032
  • Made in Germany
MU22-2WIRE-LH-B

Miller Edge MU22 2-Wire Left Hand Black - Sold per Foot

  • Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
358.000-PANEL

Whiting Bottom Panel White Aluminum Clad

  • Comes complete with #77W Lock
  • Actual replacement for Intercontinental-Winnipeg s/n 51617
ARK

LiftMaster Auto Reconnect Trolley Kit

41AC050-2

LiftMaster Electronic Circuit Board Assembly 315MHz

  • Fits 3265 PD612C
  • Replaces 41AC150-2 (board only - need to install on exisiting panel)
  • Also known as 41AC050 41AC050-2M
22-00626

Truck Door Grab Handle 13" Zinc Plated ** This is no longer available

  • Steel construction Zinc plated
  • Cross ref: Eberhard 4300
11-3503_ROD

LiftMaster Rod 1/2-13x64 Threaded Take-Up Bolt

  • Used on slide gate operators using #50 chain.
  • Also referred to as adjuster bolts
BK000

Residential Top Bracket Adjustable 1-Bolt Sold per Piece

  • Same as part number 3-31-1
  • Sold per piece - not a pair
EL25KEY

LiftMaster Replacement Key for EL25 (041B0012)

  • One (1) key for the EL25
  • Same as 041B0012
41D7742-7

LiftMaster Travel Module

  • Fits models 8165 8355 & 8155W
305-153613

LiftMaster Idler Sprocket Assembly (K305-153613)

  • Fits SL595
BOARD075E

Manaras Replacement Board Kit (No Monitoring)

  • Replacement kit that includes BOARD070E (control board) & BOARD066R (power board)
  • BOARD070E is for standard operators without the monitoring function
  • For all Manaras operators built after October 2010
  • On-board 390MHz radio receiver accepts 50 remote controls
  • For older models built before October 2010 use BOARD060 or replacement kit BOARD065
K74-31243

LiftMaster Kit SVC MOV

7470.093

Whiting Side Seal for Insulated Doors 93" Long

  • Fits Coldsaver and Tempguard
STRUT-2-1/4-18'

Door Strut 2-1/4" Hemmed 18ft Long

  • Reinforcement bar 2-1/4"
SOLID_SHAFT_10'

Solid Shaft 1" Keyed 10 ft Galvanized

  • Actual length is approx. 10'-1"
SOLID_SHAFT_9FT

Solid Shaft 1" Keyed 9 ft Galvanized

  • Actual length is approx. 9'-1"
SOLID_SHAFT_8FT

Solid Shaft 1" Keyed 8 ft Galvanized

  • actual length is approx. 8'-1"
78LMC

LiftMaster Wall Control Panel

  • Wired multi-function control panel
  • Push-button is illuminated for convenience
  • Includes an adjustable light timer
  • For use with opener built January 1995+
  • Has a lock feature to cancel all radio control signals
  • Also known as: 945CB 41A6318 041A5273‑2 012381463183 41A5273‑14 041A6318
  • .......more details
K20-1075C-2LP

LiftMaster Electric Motor 3/4 HP 115/230V 1Ph

25605R

Genie Inner Slide Kit for Chain Drive Models

  • The innerslide attaches to the chain and connects the carriage to the chain
  • Works on the following Genie and Overhead Door models:
  • IC250 PMX80 PMX500-IC/B IC250/B PMX85 ALC Series PMX60 PMX300-IC/A RCD Series PMX65 PMX500IC/A PMX75 PMX-IC/B
  • SP99 – SP SERIES LD100-500-100A-550A LAD125-555
  • CM6000-6000A-60-70-80-60S
  • OHD-696 696CD + Others
  • .......more details
59LMC

LiftMaster OutSide Keyswitch ** To Extent of Inventory

  • 12 tumblers provide double locking action
  • Self cleaning barrel weather-resistant aluminum plate
  • Cannot be shorted out from exterior with key
  • One "NO" contact used to activate the door operator
  • Includes two keys
1005-1-3/4-14

Aluminum Bottom Retainer U-Shaped

  • For door thickness 1-3/4"
36453A.S

Genie Traveler for Chain and Belt Drive Models ** To Extent of Inventory

  • Replacement carriage for models: 1022/24/26 2022/24/26 and 2200
  • Comes with a pull cord for manual release.
K75-12858

LiftMaster Clutch Kit for SL595

  • Kit includes: Clutch Pressure plate Torque Limiter Sprocket Assembly Bell Washer Nut Hex Jam Clutch Disc and Keyway
BK010

Commercial Top Bracket Adjustable 1-Bolt Sold per Piece

  • Galvanized steel
  • 12 gauge roller carrier and base plate
  • Adjustment of 7/16" minimum to 2-3/16" maximum
  • Good for use with 3" hardware
104078

Allstar Wireless Keypad 9931-WKE 318 MHz ** To Extent of Inventory

  • Compatible with Allstar and MVP receivers
  • 4-digit access code
  • Backlit keys
  • Operate LED
  • Power: 9-volt battery
  • Codes: 19683
  • .......more details
T-833-C-OCS

Allstar 3-btn 3-Door O/C/S Transmitter 109025-311 MHz****NLA

  • Open/Close/Stop remote for 3 doors
  • Compatible with 3-channel Allstar and MVP receivers
  • Portable transmitter
  • Easy access to battery and coding switch
  • Slide switch selects door to operate
  • Power: 9-volt battery
  • .......more details
41C3196

LiftMaster Antenna for Co-Axial Receiver

  • Wire antenna kit same as what is supplied in a 312 / 412 HMC
BK110/PR

Light Duty End Bearing Plate 3-3/8" with Bearing - EBF 338 Residential Sold as a Pair - LH/RH

  • With C16-32F bearing
  • Galvanized steel
  • 3-3/8" shaft offset
  • Flange allows plate to be bolted to the wall for additional support
  • Same as part number 209
GRD-2

Linear 2-Channel Delta3 Gate Receiver 310 MHz (DNR00102)

  • Auto voltage sensing - no jumpers to set
  • Two Form ”A” (normally open) relays rated at 30 Volts AC/DC up to 5 Amps
  • Supplied with whip antenna three feet of coaxial cable and bulkhead connector
  • Power: 12 - 30 VAC or 10.5 - 30 VDC
  • Codes: 128 (set by dip switches)
  • RF frequency: 310 MHz
  • .......more details
MDRG

Linear 1-Channel MegaCode Gate Receiver 318 MHz *** Discontinued

  • Activates one gate or device
  • Supplied with F-connector and whip antenna
  • Mounting bracket supplied
  • Memory: storage for up to 40 MegaCode transmitters
  • Power: 24 VAC/VDC
  • Codes: 1000000+ (MegaCode format)
  • .......more details
MDR-2

Linear 2-Channel MegaCode Receiver 318 MHz *** Discontinued

  • Activates two devices
  • Wire lead antenna
  • Mounting bracket supplied
  • Memory: storage for up to 10 MegaCode transmitters
  • Power: 24 VAC/VDC
  • Codes: 1000000+ (MegaCode format)
  • .......more details
12FT-TROLLEY-SET

LiftMaster 12' Track Set for Trolley Operator 10-5812-P (2pcs) *Actual length 179"*

  • Actual length: 179" (14' 11")
SHAFT034

Manaras Clutch (Input) Shaft for MJH

  • MJ INPUT SHAFT 5/8-24X12
41A7756

LiftMaster End Panel with Light Socket for 8557

333LMC

LiftMaster 3-btn O/C/S Transmitter 315MHz *** To Extent of Inventory

  • 315MHz dip switch technology
  • Green Yellow and Red buttons for easy identification of open close and stop.
41A7635

LiftMaster Transformer 100V

  • For model: 8550
AC7

Felco C7 Cable Cutter 3/16" Capacity

  • Tool length: 8"
  • Gives a clean cut without crushing thanks to the triangular cutting system.
  • Blades and centre bolt in high-quality hardened steel for exceptional performance.
  • Thumb catch designed for one-handed operation.
  • Pressed steel handles with non-slip grips
  • Maximum cutting diameter: 7mm / 0.28in
  • .......more details
MH00099

Micanan Bearing

  • Fits PRO-APT and PRO-HHD
  • Requires 2 per shaft
  • 3/4" Bore
ME00057

Micanan Clutch Shaft Only for PRO-APT 3/4" x 12-3/4"

  • For model PRO-APT
MS00003

Micanan Carriage for PRO-APT / T

  • For model PRO-APT / T
SHAFT023

Manaras Intermediate Shaft for MJ operator

50-105

LiftMaster Black Coil Cord 4-Wire 18-ga 20 ft. Extended Curly Cord

CABLE_316SS-500

Cable 3/16" 7x19 500' Stainless Steel

CABLE_1/8SS-500

Cable 1/8" 7x19 500' Stainless Steel

CABLE_532SS-500

Cable 5/32" 7x19 Stainless Steel 500ft

975LMC

LiftMaster Laser Parking Assist ** To extent of inventory

  • Works with Chamberlain (LiftMaster) Garage Door Openers
  • Easily connects with two wires to the photocell terminals of the opener
  • The Laser light turns on as you drive into the garage
  • Simply Adjust the light to a specific spot on the dash
GREASE

Gear and Rail Grease 3/4 oz Tube *** No Longer Available

  • A low temperature lithium based grease
  • To avoid tooth wear premature failure and temperature rise caused by friction by promoting sliding between teeth
GM3T-BX

Genie Universal Master 3-Button Remote - 37344R

  • Three Button Master™ Visor Remote
  • This 3 button remote can be used with 3 Intellicode openers
  • Replaces all Intellicode Series I And Series ll remotes
  • Replaces 9 switch and 12 switch 390MHz Genie remotes
  • Works with all Genie model Gated Community Receivers
  • This remote will not work with 315MHz Canada 12 switches openers
  • .......more details
BEARING005

Manaras Flange Bearing ID 5/8"

  • Flange bearing for 5/8" shaft
MX00147-NEW

Micanan Complete Clutch Kit for PRO-TB New Style Frame (MX00211)

  • After January 2006
  • 8" Diameter pulley
  • Feb 2017 - new part number MX00211
.273-2-R

Cut-to-Length Torsion Spring .273 x 2" Right Hand Wound Orange/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.218-2-L

Cut-to-Length Torsion Spring .218 x 2" Left Hand Wound Yellow/Orange

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.218-2-R

Cut-to-Length Torsion Spring .218 x 2" Right Hand Wound Yellow/Orange

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.207-2-R

Cut-to-Length Torsion Spring .207 x 2" Right Hand Wound Brown

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
02-407

LiftMaster Key Switch Assembly On/Off Nema 4/12

  • Two-position keyswitch. Key removable in either position.
  • Surface Mount
  • May be used on all operators
  • Die-cast metal enclosure non-tamperproof
109020

Linear 1-Channel Multi-Code Receiver 300 MHz

  • Three tabs for universal mounting
  • One "NO" relay
  • Compatible with 10 dip- swith 300 MHz Multi-code transmitters
  • Operates on 24 VAC power
  • One channel
  • Codes: 1024 (set by dip switches)
  • .......more details