Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search FAAC
LJH-383-1/2-RH

Doorlec 1/2 HP 208V 3PH Jackshaft Operator Right Hand

  • CSA approved
  • Heavy duty industrial type control station open close stop 24V. control circuit
  • Universal mounting right or left
  • Floor level disconnect device electrical and mechanical
  • Emergency chain hoist operation on LJH model only
  • Colour code wiring diagrams
  • Rotary type limit switches readily adjustable in both directions
  • Self adjusting solenoid brake
  • Friction safety clutch
  • Motor removable without disturbing limit adjustment or chain hoist operation
  • Heavy duty RC-41 roller chain drive throughout
  • All three phase motors totally enclosed fan cool
  • Overload and under voltage protection
Technical information
P-831RE

Pulsar 1-Door O/C/S Receiver 318 MHZ P-110554

  • Allstar compatible
  • Economy housing receiver
  • OPEN-CLOSE-STOP
  • 24V AC/DC
  • 8 dipswitches 318 MHz
Wiring-diagram
VBELT_4L270

VBelt 1/2" x 27" (4L270)

  • V-Belt not cogged
HAE00077

Linear LDCO Control Board BBU Compatible

  • DC motors
  • Replaces HAE00061
202-0022

TNR Composite Bottom Bar Arm for HDXL

2705.187_30

Whiting Curbside Torsion Spring.187 wire 2-3/16" ID 30" Long

  • Torsion spring wire only
  • .187 wire size
RS-40

Roller Shutter Aluminum Model 40 Made to Order Pricing by Quote Only

  • The RS-40 is designed for use in window roller shutters door recesses and small shopfronts.
  • These profiles are of better technical performance and are thus more stable.
  • At the same time good coil diameters allow to use this profile in small-size boxes.
  • The foam filling ensures good heat and acoustic insulation.
  • Its low weight allows the use of manual drives spring- or electric control devices.
  • The RS-40 profile is available with or without perforation in a wide range of RAL-like colours.
    • .......more details
10RD433

BEA Digital Receiver 433 MHz

  • Integral sequencing "learn" buttons (for vestibule sequencing)
  • Pulse/toggle functionality
  • Additional hold time
  • 12-24V AC/DC
  • Max No. of Programmed Units Per Receiver: 100 Transmitters
  • Dimensions: 2 3/4" x 2 1/8" x 1"
    • .......more details
CAMPLATE012

Manaras Cam Plate MTH/MTBH N1

EHJ-343-1/2

Doorlec Industrial Jackshaft Op. 1/2 HP 460V-3Ph

  • Heavy-Duty Industrial Operator for Sectional or Rolling Steel Doors
  • DC-2000 logic with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Solenoid Brake prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Automatic Friction Clutch protects the door and operator
  • Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications
    • .......more details
GH-311-1.5

Doorlec Industrial Gearhead Door Operator 1.5 HP 115V 1-Phase

  • Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
  • DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Worm gear reducer 40:1 ratio for high-torque and long life
  • Solenoid Disk Brake Prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Optional Friction Clutch available
    • .......more details
O02R9502

AirLift Rebuild Kit Orig. Op. w/Brass Nut

CSW200101UL

LiftMaster Commercial High-Traffic Swing Gate Operator with Heater 1 HP 120VAC **Include part 75-50293

  • First choice for heavy-traffic applications such as large gated communities residential developments commercial complexes and private estates.
  • Unlike other systems the CSW gate operators are designed with a "non-scissor action" swing arm to greatly reduce the risk of injury
  • Bi-Part Delay Monitors and adjusts speed and position of each wing to ensure primary gate closes last.
  • Synchronized Close Simultaneously closes gates.
  • Pre-Motion Warning Alarm Activates onboard alarm three seconds prior to gate motion.
  • External Alarm Reset Button Instantly resets the built-in safety alarm siren.
    • .......more details
PPLK1PH-100

LiftMaster Passport Lite 1-Button Mini Proximity Remote with Sec+ 2.0 Technology 100/PKG

  • Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
  • These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
  • 2x the range of standard remote controls
  • Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
  • Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators
  • Keychain remote control sold in a 100 pack
    • .......more details
.177_2"-RH

Torsion Spring .177 x 2" x 12ft RH Gold

  • Wire size: .177
  • Inside diameter: 2"
  • Length: 12 ft
LMLEVPACK-OB

LiftMaster Yale Smart Keypad Lever Oil Rubber Bronze Finish Incudes 821LMC

  • Smartphone Control – Pair with included Lock Wi-Fi® Bridge to securely lock unlock and view door activity in the myQ® App.
  • Illuminated Keypad: Easily enter your code using the backlit keypad.
  • Brings Keyless entry to doors with no deadbolt
  • Key Free – No key hole means no lock picking or keys to lose.
  • 9V Battery Back-Up – Never worry about getting locked out due to dead batteries.
  • Works with Key by Amazon to provide a seamless delivery experience.
    • .......more details
Programming instructionsSell sheet
871-ZAP

Zap Interface Expansion Module

  • A plug-in module with the option for additional expansion room for inputting external control devices.
  • Open Stop Close Common and Cycle input terminals are all provided
  • A 24VDC output terminal is provided.
  • If the power supply is overloaded an LED illuminates so you know there is a fault or that a device is drawing excessive current.
  • Requires 14-20 AWG wiring and plug-in mounting.
  • Comes with a six position dual direction plug that slides in.
    • .......more details
106141

Marantec Shaft Adapter

17350

Doorlec Cable 5ft with Antenna

111503.0002.S

Overhead Gear Reducer 40:1 RHX

D-22A

Linear 1-Channel 1-Button Handheld Transmitter ** Available to extent of inventory

  • Removable wall mounting clip
  • Standard digital format: 256 selectable codes
  • Powered by one 9-volt battery (included)
  • Current consumption: 12 mA transmitting
  • RF frequency: 303.875 MHz
  • Dimensions: 2.16" W x 3.75" H x 0.88" D Order number: SNT00016
    • .......more details
100144

Linear Brake Shoe w/Lining

  • For commercial door operator
111502.0002

Overhead Electric Motor RHX 3/4hp 115V Single Phase

830

Fasteners Wood Screw #8 x 3" Flat Head Course Thread Zinc Plated 1000/Box

  • Drive style: Robertson / Square head
  • Plain thread
328-729

Lip Shock Absorber Dock Leveler

36045A

Genie Helical Gear 2040L

  • Helical gear assembly for the Genie #2040L garage door opener.
  • Same as: 36045AS 36045. 36045A 36045S
  • Includes: Helical and limit gear screws clips and small tube of grease.
HW0427-LH

SteelCraft Commercial Bottom Bracket Left Hand Only

  • Left Hand bracket only
  • Can be used for both 2" and 3" tracks
  • To be used on door tracks that are installed wide enough to accomodate the side cable pulley
  • Door hardware must start with a #1 hinge on the bottom panel for both 2" and 3" hardware
  • Adjustable cable can level door from the ground
  • Heavy gauge steel construction
    • .......more details
CP-PU-DRV-58-8

Lynx Drive Pulley 5/8" x 8" 4L MR TC3 Open/Spoke Style for Trolley Ops

PHOTO-070

Manaras Monitored Photoelectric Cells N1 Thru-Beam 45' Range

  • Monitored NEMA 1 enclosure through-beam type photocell
  • 4-Wire
  • Indoor
  • Range: 45 ft
POWERHINGE

LiftMaster Power Hinge - All Steel Pair

  • Elite Power Hinge ball bearing hinges for steel swing gate (Pair)
  • Double 5/8 in. ball bearings for smooth operation
  • 3/4 in. solid stainless steel shaft grounded and tempered to Rockwell standards
  • Continuous cycle operation self-lubricating/no grease fittings
  • Offers a unique design so the gate never hits the post
  • 3000 lbs. per pair weight capacity
    • .......more details
E3K-2018

Omron Retro-Reflective Photocell w/Built-In 10K Resistor UL325-2018 *Same as model E3K-R10K4-N4

  • Fully complies with UL325-2018 standard for gate ops. that use the 10K resistor method and also the Normally Closed method
  • Easy to wire terminal strip
  • Plug-in replaceable outputs
  • Range: 40ft
  • Power: 24-240V AC/DC
  • The E3K-2018 has a second relay to accommodate traditional dry contact for non-monitored applications.
    • .......more details
Wiring DiagramsSell sheet
14219

Doorlec Disconnect Arm LJH

K001D8397-1

LiftMaster Power Board 3ph 575V L5

  • This is a 3PH/L5 Power Board 575V Replacement Kit. Compatible with various LiftMaster® 3 Phase Logic 5.0 Commercial Door Operators; equipped with current sense
MK-00428

Micanan Reversing Relay 24VAC Coil 3-Pole TPDT 11-Pin Flange Mount

  • For PRO-LTB LJ LH LHAB
MD-00487

Micanan Roller Chain #60 Stainless Steel 10' Pack

.437-514-L

Cut-to-Length Torsion Spring .437 x 5-1/4" Left Hand Wound Red/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
SPRAY-562

Aluminum Touch Up Spray Paint 350g Commercial Brown / Brun Comm. #562/462

  • 350g
ALUM-265

Aluminum 24" x 100' Spool Antique Brown / Brun Antique # 265

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 265
  • White #431 on reverse side
Colour chart
PRO-T-7543-U

Micanan 3/4HP 460V 3P Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 HP models
  • Monitored board
60-7248-CBI29

Wheel Chock Safety Pkg incl'd: cast ductile iron wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

  • System Includes (1) CBI-29 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
  • Made from Cast Ductile Iron for Impressive Strength
  • Painted Blue for good Visibility
  • Completely Reversible for Simple Use
  • Size: 8" wide x 12" long x 9" high
G50402

LiftMaster Timer Defeat Hold Open Switch 50-12860

  • Allows for the auto-close timer to be manually disabled
HRB-12

High Riser Bracket for 7" Above Dock or Higher 12"

  • High Riser 12" Riser Bracket for 7" Above Dock Door or Higher
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
STRUT-2-1/4-14'-NH

Door Strut 2-1/4" Non Hemmed 14 ft Long

  • Reinforcement bar 2-1/4"
  • 20G
MK-00050

Micanan Overload Reset 3-Phase 2.6 - 3.7 Amps

R1

Erone Radium 1-Channel Key Chain Transmitter 433MHz

  • Designed for the control of automatic closing systems and anti-burglar systems thanks to its very high security coding system (KeeLoq® Hopping code).
  • The code sent by the transmitter changes at each activation avoiding any scanning and copying risk.
  • A special algorithm allows to keep synchronized transmitter and receiver.
  • Range up to 250 m (820 ft)
  • Ergonomic rugged & durable
  • Battery: Two 3V lithium battery (CR2016)
    • .......more details
MV-00296

Micanan Wireless Push Button Station OCS for Logic 10.0

  • Used only on Logic 10.0 program 3.2.5
3-44-2

Roller Carrier Only 2-Hole Sold per Piece

  • Sold per piece no box quantity
BOLT016

Manaras Hex Bolt 1/4-20 x 4

KPR2000

LiftMaster Wired Keypad and Proximity Reader

  • The KPR2000 supports a maximum of 2000 users in multiple access configurations (card only 4 to 6 digit PIN only or a combination of card and PIN).
  • Supports HID 26 and 30-bit Wiegand proximity card formats.
  • Designed for outdoor environments with a sealed weather proof design allowing you to easily mount anywhere.
  • Functions as a Stand-Alone Controller or in Pass-Through Mode (Wiegand Keypad Wiegand Proximity Credentials ASCII Keypad).
  • Latch Mode allows you to hold open a door or gate for an extended period of time.
  • Rapid Programming and Block Enrollment capability “Add” and “Delete” program cards included.
    • .......more details
Installation instructionsManuel d'installationSell sheetBrochureWiring instructionsInstructions de cablage
OCDFX1

Overhead Door 1-Btn Transmitter 315/390 Mhz

  • Dual Frequency transmitter that will work on all OHD/Genie brand 315 or 390 rolling code commercial openers including the the RX OHD commercial opener.
  • Part Number: OCDFX1.S GIDFX1.S
30257T

Genie Coupler Screw Drive Units

  • Used for attaching the screw of Genie screw drive rail to the motor head.
  • This coupler is made to break away if the door hits a hard obstruction thereby protecting the motor.
  • If the motor of the screw drive Genie runs but the screw is not turning this coupler needs replaced.
  • To check and replace that part remove the two screws holding the rail to the main power head
  • Mounts on rear of opener rail and fits in motor head.
LVB420-11SF

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
STRUT-3-18'

Door Strut 3" Hemmed 18ft Long

  • Reinforcement bar 3"
PMT20RI

Carlo Gavazzi Receiver Unit Only

  • PMT20RI has universal voltage input of 10-240 VDC and 24-240 VAC
  • Normally open and normally closed output (no timer).
  • Adjustable sensitivity
  • The housing dimensions are: 25x65x81 mm
  • IP67.
SPRING-SQUARE-W

Torsion Spring Square Wire Custom Order

  • Custom spring made to order
PRO-H-7511E-RH

Micanan 3/4HP 115V 1P Hoist Operator NM ECB No Eyes Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Solenoid brake OPTIONAL
  • Non-monitored board NO photoeyes
Installation manualSpecification sheet
Q013

LiftMaster Idler Pulley K75-50090

  • Toothless idler gear for use on SL 3000 operators
  • Includes bolt and sleeve.
  • Dimensions: 3.5" diameter 1-3/8 wide with 1/4 off set total width 1-5/8 with 1/2" x 2-7/8 bolt idlers sold individually
BL229-GATE-OP

Automatic Systems Universal Perimeter Raising Barrier Gate 120V

  • Highly configurable barrier designed for many applications and environments
  • Numerous accessories offered allowing to meet various installation constraints and various requirements in terms of security
  • Barrier equipped with control unit allowing operation perfectly adapted to every situation
  • Change of configuration or operation possible even after initial installation of the product
Bilingual parts catalogueTechnical manual
AIRSWITCH017

Fraba Wireless Air Wave Switch Transmitter/Receiver Kit

  • The small radio transmitter unit and the pneumatic switch are packaged within the DW3S-200 case while the receiver is built into a Nema 4 case
  • It is equipped with a NCC or a NOC relay
  • Battery is included # CR2032
Programming instructions
SNS1P6

Belden RG6 Co-axial "F" Male connector Snap-N-Seal

28-03190

Truck Door 1" Vert. Track and Right Angle Assbly Roadside (LH) 96.5" Todco Style***To extent of inventory

  • For Todco style doors
  • Galvanized steel 14-gauge construction
  • Includes right angle frame 1" track and operator bracket
  • Fits doors 72" - 90" high
54-440

Limit Switch Snap Action Standard Short Hinge Roller Lever S54

  • SPDT
SETR2641AM2C

Erone 2-Channel Mini Transmitter Dark Red 433MHz

  • Heavy-duty construction
  • Elegant & easy to carry
  • Light grey and dark red base with dark red buttons
  • Unobstructed range: 656 ft (200m)
  • 60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
  • Two lithium batteries (CR2016) included
    • .......more details
LYNX-6000-BOARD

Lynx 6000 Commercial Logic Board

  • Replacement logic board for Lynx commercial operators built from 2002 through 2005
  • Will not work for the ALDJ Model (Light Duty)
Basic Operation Manual
CPS3CARD

LiftMaster Option Card Only (41K0811)

  • Works with all commercial Logic versions L2 L3 L4 L5
  • Use with CPS-U to add a second set of eyes to the operator
  • Allows activation of Timer-To-Close without CPS-U
  • Simply plugs into Logic board
  • Cut resistors on JU1 & R16 to activate timer feature
  • Same as 041K0811
    • .......more details
K74-18382

LiftMaster Hall Effect Sensor Assembly **to extent of inventory

  • Formerly 76-G0541 G76G0541
  • For SW470 with GL or S3 Board SW490 with GL Board
DS75

Light Commercial Non-Insulated Rollup Door with Exterior Curtain Lock ** Price by Quote Only

  • Mini Storage door non insulated with exterior curtain lock
  • Custom ordered to exact size
Sell SheetDrawing
60-2728

AB 42GRU-9001 Retro-Reflective Photocell Exterior

  • Voltage: 12VDC/24VAC/DC
  • Sensing Distance: 30 Feet
  • Comes with Bracket and Reflector
  • NEMA 3 4 4X 6P 12 & 13
  • Allen Bradley
111854.0001

Overhead Logic Board for RSX 1/2 Hp 115V

  • Description: KITPCB1PH1/2HPSX/HXUL10
  • For RSX ad RHX models 1/2 Hp Single phase operators
Replacement Instructions
GD-LITE-1224134

Lynx Thermo Window 12" x 24" x 1-3/4"

CPT-210-K5

Miller Edge Non-Monitored End Plug Kit

  • For use with CPT-210-50 bulk extrusion
  • Kit includes: 5 wired 5 non-wired end-plugs 1oz tube of adhesive
DXT-42

Linear 2-Btn 3-Channel Key Ring Transmitter *** Discontinued

  • Battery powered portable miniature transmitter designed for use with Linear’s DX Format receivers.
  • Each transmitter can be used in a limitless number of wireless remote control applications.
  • Pressing a transmitter button sends a digitally coded wireless signal to its companion receiver. The transmitter buttons have a positive click feel.
  • The digital DX code format features over a million possible codes.
  • The DX transmitters are precoded at the factory to unique codes so no field coding is required. Transmitters can send a signal for up to 10 seconds with each button activation.
  • Each button sends a unique code. Pressing both buttons together sends code three. Press button(s) for a minimum of two seconds to insure receiver activation.
    • .......more details
Installation Manual
IS40P

BEA Presence Sensor

  • Equipped with 9 pre-programmed pattern configurations for various industrial applications
  • Various learn time settings allow presence detection to either remain constant or ignore a motionless object after a pre-determined period of time
  • Maximum mounting height of 16’ and a detection pattern up to 10’ X 10’
  • Designed with NEMA 4 enclosure
  • Most adjustments can be performed using the BEA remote control
Installation manualSell sheetCut sheet
GH4416-08-L

Green Hinge #8 12-ga Left Hand *** No longer available

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
LC-36A

LiftMaster Light Curtain **discontinued

  • Must be used with a primary entrapment device and be installed along the vertical plane of the door.
  • Color-coded transmitter and receiver for easy identification.
  • Provides 36 in. of effective height coverage to increase the area of protection.
  • Multiple sets of LC-36A curtains can be mounted on a door providing coverage flexibility.
  • Maximum door width of 33 ft. ensures coverage for most commercial doors.
  • Eight (8) LEDs per side and 22 cross-beams produce an invisible curtain of infrared light for maximum detection capability.
    • .......more details
Installation ManualManuel d'InstallationSell SheetConnecting the lc-36A to a Non-LiftMaster Opener
8030234

Marantec Chain Connector Kit

  • Works for all Marantec Chain Drive Openers
  • For models: Mac Lift M4500M4700Q7500Q7700 M4500e M4700e
  • Includes two connector pieces and four screws
  • Not for use on the heavy duty rails used by Q7900 & M4900e
CPS-MEI

LiftMaster Electric Edge Card **to extent of inventory

  • The CPS-MEI is an interface for a monitored 2-wire edge that can be used in place of photo eyes and meets the monitored requirement of UL325-2010
  • Same as Miller Edge SM-102
Q223

LiftMaster Control Board Master / Second (K001A5869) *** Discontinued

  • Replacement control board for the Miracle-One gate operator with two arms - Master / Slave.
  • Same as part no. K001A5869
OHJ-6213-ECB

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 240V 1 Ph with Elect. Circuit Board

  • 25 cycles per hour 100 cycles per day
  • An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
  • Specifically designed to motorize grills when a manual egress is required
  • Mechanical brake
  • Hoist on right standard
  • Full overload protection
    • .......more details
Installation ManualSell Sheet
37407

Doorlec Reversing Contactor BF9 24VAC

831T

Allstar Stationary TransmitterO/C/S 3-Btn 1-Door 318 MHz 107483 *** To extent of inventory

  • Open/Close/Stop stationary remote for 1 door.
  • Designed for commercial automatic door and gate operator applications.
  • This transmitter can operate a single receiver connected to one operator
  • Compatible with 3-channel Allstar and MVP receivers
  • Easy access to battery and coding switch
  • Power: 9-volt battery
    • .......more details
Programming Instructions
BL229-ARM-12-R

Automatic Systems Aluminum Barrier Gate Arm 12 ft Round

41A6408

LiftMaster Travel Module (8500 3800P 3800PLD & 3900) - 41B8861

  • Works on model 8500
Programming InstructionsInstructions de programmation
75-10170

LiftMaster Trolley-Slider Assembly (08-10169)

  • For LiftMaster trolley models MT T GT
  • Also known as: 307085008 75-10170 08-10169 085008 7510170
165-A

Fusible Link For Loads 1 to 30 lbs

  • Length is 2.625" width is .875"
  • Distance between centers is 1.75"
  • Priced per each
  • Fire rated at 165 degrees Fahrenheit
5464.96

Whiting Top Seal Coldsaver 96" L 2-3/16" W

MS00003

Micanan Carriage for PRO-APT / T

  • For model PRO-APT / T
50-104-2

LiftMaster Orange Coil Cord 3-Wire 18-ga 20 ft. Extended Curly Cord

AA

Battery AA Alkaline Duracell Procell Sold Individually

  • Sold Individually
41D3452

LiftMaster Limit Switch Assembly

  • Compatible with most operators 1986 - current
41DJ001

LiftMaster Circuit Board with Plate for 3800 3900 41DJ001B

  • Board: Security+ 315 MHz
  • For jackshaft models; 3800 3800P 3800PLD & 3900
  • Also known as 41DB001-2
Programming InstructionsInstructions de programmation
17315

Doorlec DC-3200T 32-Channel O/C/S Transmitter 313 MHz

  • Wall mount transmitter for 32-doors
  • Includes 9V battery
  • Old style
Programming instructions
CP-SW-MIC

Lynx Limit Switch for Commercial Operator with Logic Board

  • Single limit with curved actuator lever
  • Switch attaches directly to the Logic 6000 board
RA-LPL-KEYPAD

Lynx Wireless Proline Keyless Entry 303 MHz

  • Illuminated keypad
  • Weather shutter protects keypad from elements
  • 1 to 6 digit codes for maximum security
  • Allows for access without remote or keys
  • Compatible with Lynx residential openers built from 2000+
  • Mounting screws and 9V battery included
    • .......more details
Compatibility chart
MOUNTSHAFT001A

Manaras Clutch Shaft Kit for MJH

  • Input / clutch shaft kit for MJH built after 1999
Drawing
DOORARM001

Manaras Door Lifting Arm Assembly

  • Complete door arm assembly for all Manaras trolley operators.
SPREADER001

Chain Tensioner for 1" shafts

  • Chain spreader for installation with 1" operator shaft & 1" door shaft.
  • Includes 2 shaft collars and set screws.
  • Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing
Installation instructions
7145.96

Whiting Bottom Seal For Coldsaver 96" long

  • Aluminum retainer sold separately
2237.096

Whiting Coldsaver Intermediate Panel 13-1/2" x 96"

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide
DRQP

Linear 1-Channel Delta3 Gate Receiver 310 MHz ** Available to extent of inventory

  • 1-Channel Gate Receiver
  • High-sensitivity short-range radio receiver
  • Operates in conjunction with the 9-inch local antenna (supplied).
  • Designed for use with automatic gate operators or systems where a remote antenna is needed.
  • Same as: DNR00013P
Installation Manual