Devanco Canada - Get The Right Garage Door Opener‎ and Parts

1A3982

LiftMaster Operator Splash-Proof Cover

For models: MH H HCT GH
For wall mounted operators 31" L x 19" W x 18" D assembly required.

Installation manual

ME00057-COMPLET

Micanan Clutch Shaft Complete for PRO-APT (SCLUTCHSHAFT) MX00213

For model PRO-APT

CABLE_532SS-500

Cable 5/32" 7x19 Stainless Steel 500ft

Comparison charts

QUICK_CLOSE

Commercial Quick Close Device / Universal Timer V7

This device will automatically close the door as soon as the vehicle passes through the safety beams.

Wiring Instructions Monitored connection Non-monitored connection

109950

Linear 1-Channel Multi-Code Gate Receiver 12-24V

Operates on 12-24 volts AC or DC power
One channel
Whip antenna
3-foot antenna coax and bulkhead connector
Codes: 1024 (set by dip switches)
RF frequency: 300 MHz or 310 MHz (jumper selectable)

.......more details

Programming Instructions

45DCT

LiftMaster Circuit Board

Board: Tri-band Security+ 2.0
DC Chain/ Belt Drive model
Fits: 8360 8550
Also known as; 45DCBR1A 041D7356 1D7356 41DCBC1A 41DCBC3A 41DCCC2A 41DCBC5A 45DCCL5A 45DCCL3A 45DCCL1A 45DCCR5A 41D7356 45DCCR3A 45DCCR1A 001D7356 41DCCC1A 41DCCC3A 45DCJL5A 45DCRL1A 41DCCC5A 45DCRL3A 45DCJL1A 45DCJL3A 45DCBL5A 45DCBL3A 45DCBL1A 45DCBR5A 45DCRL 45DCBR3A 47DCCR1 1D8363 045DCT 45DCBL1 45DCBL2 45DCBL3 45DCBL4 45DCBL5 45DCCL1 45DCCL2 45DCCL3 45DCCL4 45DCCL5 45DCBR1 45DCBR2 45DCBR3 45DCBR4 45DCBR5 45DCCR1 45DCCR2 45DCCR3 45DCCR4 45DCCR5

10FT-RAIL-BELT

LiftMaster 10' belt drive rail 2770BD - colour code: Blue

Price reflects cost if purchased with an opener

535LMC*

LiftMaster Universal Radio Control Receiver 390 MHz **Replaced by 412HMC

Over 100 billion possible codes makes it impossible to duplicate the frequency
Jumper option for momentary or constant relay contact
Specifically for use with most 3-wire systems without a transformer
Accepts up tp 8 Security+ remote control codes and one keyless entry
Will work with LiftMaster Sears Craftsman or Chamberlain remotes with the yellow LED light - Sec+ format
Will work on 2 or 3 wire systems. If your system is 2-wire a 24-volt 85LM transformer is required

.......more details

CR2016

Maxcell 3V Lithium Button Cell

977LMC*

LiftMaster Wireless Keyless Entry 390 MHz - DISCONTINUED

Wireless Keyless Entry with 390 MHz rolling code
Compatible with all 390 MHz Chamberlain (LiftMaster) residential and commercial door openers and gate operators
Mounts easily to the door jamb with two screws
Compatible with Security+ Systems with amber learn LED
Compatible with models built from 1997-2005
Includes 9V battery

.......more details

312HMC

LiftMaster Universal Coaxial Receiver Sec+ 315 MHz

External 8" coaxial antenna included
Security+ rolling code technology and/or Dip switch compatibility
12 VDC or 18-35 VAC/DC jumper selectable
Momentary or constant contact selectable
For replacement antenna use 41C3196
Accepts up to 31 remote control codes on Normal Security setting

.......more details

Programming Instructions Instructions de programmation

.283_3-3/4"-LH

Torsion Spring .283 x 3-3/4" x 12ft LH White

Wire size: .283
Inside diameter: 3-3/4"
Length: 12 ft

.273_2-5/8"-LH

Torsion Spring .273 x 2-5/8" x 12ft LH Orange/Red

Wire size: .273
Inside diameter: 2-5/8"
Length: 12 ft

MK00066

Reversing Contactor Allen Bradley 24V coil

Allen Bradley no. 104-C16KJH22-X6
Cat. no. 100-C16*10

829LM

LiftMaster Garage and Gate Monitor Sec+ 2.0 **to extent of inventory

This innovative monitor lets you check and close the garage door or gate from any room in the house.
Green and Red LED lights indicate whether the garage door or gate is open or closed.
Volume controlled audible alert lets you know when the garage door or gate is being opened.
Able to monitor and close up to four garage doors or gates.
Compatible only with new Sec+ 2.0 MyQ compatible garage door and gate operators.

Programming Instructions Instructions de programmation

823LM

LiftMaster Remote Light Switch Sec+ 2.0 ** To Extent of Inventory

Controls lights remotely
Turn on lights in your garage yard or home with your garage door opener remote control
Use with LiftMaster Internet Gateway to control lights from smartphone or computer
Compatible only with Security+2.0 garage door openers and accessories enabled by MyQ technology

Installation Manual Manuel d'Installation

71AB120

LiftMaster Solenoid Brake Assembly for APT Logic 4

Installation Manual

41A6095

LiftMaster Electric Motor and Bracket for 3800 / 8500

For models: 3800 3800P & 3800PLD
Also known as 002D1622

29-31245

LiftMaster Relay 12VDC 250VAC 4-Pin SPDT C & D relay 3-phase only

C & D relay 3-phase only

29-31244

LiftMaster Relay 24VDC 6-Pin DPST (A & B Relay) All Operators

19-3025

Roller Chain #50 Nickel Plated 25ft Length

R-831-E

FL-Allstar 1-Door O/C/S Receiver 110554-311 MHz

Commercial Open/Stop/Close receiver for one door.
If your operator can be controlled by three button station then the R-831-E receiver and commercial remote controls will work with your operator.
It is easy to set with its learn feature (no coding switch).
This receiver can accept up to 8 different operational codes.
Manufacturer's model number: 190-110554
Dimensions: 6 1/4" x 3 5/8" x 1 3/4"

.......more details

Programming Instructions

41B3869-3A

LiftMaster Trolley Kit for Belt Drive

Complete trolley assembly
Replaces 41B3869-1

.273_2-5/8"-RH

Torsion Spring .273 x 2-5/8" x 12ft RH Orange/Red

Wire size: .273
Inside diameter: 2-5/8"
Length: 12 ft

.243_2"-RH

Torsion Spring .243 x 2" x 12ft RH White/Yellow

Wire size: .243
Inside diameter: 2"
Length: 12 ft

41A4373A

LiftMaster Safety Sensor Kit 1993-1998 ** Replaced by 041-0136 & 041-0155-000

For LiftMaster Chamberlain & Sears openers built from 1993-1998
Kit includes: Saftey sensors 24" wire and gel connectors
Replacement: 041-0136 with the 041-0155-000 brackets

15-41B32LGH

Sprocket 32 Teeth 1" Bore 1/4" Keyway

Sprocket for #41 chain

17300

Doorlec DC-3000T3 3-btn Transmitter 313 MHz

One block of 10 dip-switches for programming
Will activate 3 Doorlec 17307 receivers (DC-3000R)
Includes visor clip and 9V battery

Programming Instructions

17311

Doorlec AT1035D 1-btn Mini Transmitter 313 MHz ** To extent of inventory

One block of 10 dip-switches for programming
Compatible with Doorlec 17307 receiver (DC-3000R)
Includes 12V battery (GP23A)

SEA433

Erone Tuned Antenna 433MHz

Increase reception and/or range
11.5ft (3.5m) coaxial cable (RG 58) included
L-Shaped bracket for wall-mounting

877MAX

LiftMaster Sec+ 2.0 Keyless Entry with Universal compatibility (MAX) *To Extent of Inventory

Security+2.0™ rolling code technology assures a new code is sent every time the keypad is used
Temporary password option enables visitors or delivery and service personnel to enter the garage without giving them your personal code Completely wireless – powered by one 9-volt battery (included)
Weatherproof flip-up protective cover Backlit keypad makes numbers easy to see even in the dark
One-button-to-close feature makes it easier than ever to close your garage door (works with all LiftMaster® garage door openers manufactured since 2006)
Programs in 2 easy steps
Compatible with LiftMaster® Security+2.0™ garage door openers

.......more details

877MAX Manual

RADIO-29

Manaras Commercial Receiver Antenna

Commercial receiver coaxil antenna

RADIO-16

Manaras MT2-1000 2-btn transmitter 313 MHz****Replaced by RADIO-EM903

Open/Close remote for 2 doors
Comes with LED battery life indicator
9V battery included
Sunvisor clip included

Programming Instructions

MDTK

Linear MegaCode Wireless Keypad 318 MHz *** To extent of Inventory Repl. by LPWKP-G

Activates multiple MegaCode receivers
User selects 1 to 6 digit PIN number or 1 to 6 letter PIN name
Programming is easy via the keypad; MegaCode receiver auto-learns PIN
Backlit keys for easy viewing
Wall mounting hardware (2 screws and anchors) supplied
Power: 9-volt battery included

.......more details

Programming Instructions

MGR

Linear 1-Channel MegaCode Gate Receiver 318 MHz

��Single Form ”A” (normally open) relay rated at 30 Volts AC/DC up to 5 Amps
Supplied with whip antenna three feet of coaxial cable and bulkhead connector
Memory: storage for up to 40 MegaCode transmitters
Power: 12 - 30 VAC or 10.5 - 30 VDC
Codes: 1000000+ (MegaCode format)
RF frequency: 318 MHz

.......more details

Installation Manual

8833TC-OCS

Allstar 3-btn 3-Door O/C/S Transmitter 109025 318 MHz ***Replaced by P-8833TC-OCS

Open/Close/Stop remote for 3 doors
Compatible with 3-channel Allstar and MVP receivers
Portable transmitter
Easy access to battery and coding switch
Slide switch selects door to operate
Power: 9-volt battery

.......more details

Programming Instructions

733T

Allstar 3-btn 3-Door O/C/S Transmitter 107477 318 MHz *** Replaced by P-733T

Open/Close/Stop remote for 3 doors
Compatible with 3-channel Allstar and MVP receivers
Stationary mounting
Easy access to battery and coding switch
Power: 9-volt battery
Codes: 6561 (set by eight trinary dip switches)

.......more details

Programming Instructions

DT

Linear 1-btn Delta3 Transmitter 310 MHz (DNT00002A)

Activates one Delta-3 receiver
Test/operate LED
Visor mounting clip supplied
Power: 9-volt battery
Codes: 256 (set by 8 dip switches)
RF frequency: 310 MHz

.......more details

Programming Instructions

1336.5

Whiting Stainless Steel Curbside Top Closure Bracket for 10" radius

100BL

1" Light Brush Insert 6ft Long

Polypropylene bristles
Same as model MS1701

1006-1-3/4-10'

Rigid Vinyl Bottom Retainer U-Shaped 10' Long

Black with flexible fin to touch door face.
For door thickness 1-3/4"

1006-1-1/2-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

Black with flexible fin to touch door face.
For door thickness 1-1/2"

1006-1-1/2-12'

Rigid Vinyl Bottom Retainer U-Shaped 12' Long

Black with flexible fin to touch door face.
For door thickness 1-1/2"

1003-1-5/8-16'

Aluminum Bottom Retainer L-Shaped

For 1-5/8" thick doors.

1003-1-3/8-16'

Aluminum Bottom Retainer L-Shaped

For 1-3/8" thick doors.

BLOCK-BLUE

Spring Repair Blocks .2187-.3065 Pair

For the temporary repair of a broken spring.
Wire size: .2187 - .3065

18-HWB-PAIR

Winding Bars Hex 18" Set of 2

Cold rolled hardened steel.
Hex shape keeps the bar from rolling away.
Machined to 7/16" at one end with a 1/2" outside dia. on the other end
Sold as a pair.

1001-12-BLACK

Commercial Side & Top Weather-Strip 12' Long - Black

Aluminum retainer with black dual-fin vinyl

32-48-170

Extension Spring 8' Door - 170 lbs Orange

Double - Loop
32" long 48" stretch 170 lb load
Springs sold individually
Rated for 10000 cycles

Spec Sheet

25-42-300

Extension Spring 7' Door - 300 lbs Tan w/ clip

Double - Loop
25" long 42" stretch 300 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

25-42-150

Extension Spring 7' Door - 150 lbs Red

Double - Loop
25" long 42" stretch 150 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

25-42-60

Extension Spring 7' Door - 60 lbs Brown

Double - Loop
25" long 42" stretch 60 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

91-00506

Truck Door U-Bolt 1-3/4" long

Zinc plated finish
Used to attach cables to Whiting doors
Cross Reference: W #70-5

28-32081

Truck Door 2" Horizontal Track with 8" Radius 120" Roadside (LH) for Whiting Roll-Up Doors

SPECS: Length: 120" Fits door sizes: Greater than 96" high
Cross Reference: W #11-3
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints
8" radius
For use with 2" diameter steel or nylon rollers

.......more details

28-02214

Truck Door 2" Vertical Track and Right Angle Assembly 120" Curbside (RH) for Whiting Roll-Up Doors

SPECS: Length: 120" Fits door sizes: 101" - 114" high
Assembly includes: Right angle mounting track Vertical track and Torsion bracket
Cross Reference: W #2275-1
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints

28-02114

Truck Door 2" Vertical Track and Right Angle Assembly 120" Roadside (LH) for Whiting Roll-Up doors

SPECS: Length: 120" Fits door sizes: 101" - 114" high
Assembly includes: Right angle mounting track Vertical track and Torsion bracket
Cross Reference: W #2275-2
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints

27-20307

Truck Door Balancer Bracket End - Roadside for Whiting Roll-Up Doors

Steel construction
Plain finish
Cross Reference: W # 2524 for # 2376 balancer

27-20202

Truck Door Winding Cone for Dual Spring Assembly for Whiting Roll-Up Doors (2-3/16")

Zinc die cast construction.
Universal design that will work for both Curbside (RH) and Roadside (LH) wound springs.
Cross Reference: W #2518
2-3/16" I.D.

26-40400

Truck Door Dual Durometer Side Seal 5/16" Track Spacing 114" Long for Whiting Dryfreight Doors

Allows for easy door operation.
Seal protects cargo area from dirt and moisture
Will not bunch up as bottom panel goes around top curve.
Co-extruded using rigid PVC backing with flexible PVC seal against the door.
For use with right angle vertical track
Fits only right angle vertical track assembly.

.......more details

HD3076

Lift Handle Roll Grip Round Zinc Plated 5-1/2"-5-3/4"

Measures 7" from end to end
Measures 5.5" from eyelet to eyelet

26-14523

Truck Door Intermediate Panel (13" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

SF200

Spring Fitting 2" Pair

Unviversal thread for use in either LH or RH wound springs.
Pair includes: (1) winding and (1) stationary.
Maximum wire size diameter: .3065".
Set screw installed: 3/8"-16 x 1" (2).
Mounting: 1" tube or solid shaft
Winding bar hole 1/2"

.......more details

H11G04

Hinge #4 x 11 gauge

11 gauge # 4 hinge - 0.72 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

H11G02

Hinge #2 x 11 gauge

11 gauge # 2 hinge - 0.69 lbs
Bright zinc-plated
For use with 7/16" stem rollers

RS1037

Roller 3" Steel 7" stem 10 ball

Steel Roller Wheel diameter: 3"
Working length: 6.5"
Overall length: 7.75"
Box qty: 75 Box weight: 34.2 lbs (3-7-10 Steel)

R5200

Pulley 3" HD Yellow Zinc Plated Steel 200lb Max

Bored for 3/8" diameter bolt
Maximum cable diameter: 1/8"
Riveted with Ball Bearing

R5201

Cast Iron Pulley 3"

Bored for 3/8" diameter bolt
Cable diameter: 1/8"
Cast iron pulley mounted on two pressed sealed bearings.
Radial Load: 400lb

846CABLECL

Cable Clip - 14GA

Cable Adjustment Clip
3 hole pattern
Used to attach a cable to the S-hook on an extension spring system
Same as part number 423

903ADJORBX

Operator Reinforced Bracket 18-24" Adjustable Zinc Plated No Hinge

Also known as ARB brackets

41A2817

LiftMaster Drive Gear and Worm Kit (No Sprocket)

Also known as: 081B0045 062216 081C0179 81B45 2612159

Installation Manual Manuel d'Installation

36-RWB-PAIR

Winding Bars Round 36" Set of 2

Cold rolled hardened steel.
Machined to 1/2" at one end with 5/8" outside dia. on the other.
Sold as a pair.

20-1050B-2RLP

LiftMaster Electric Motor 1/2 HP 115/230V 1P Base Mount

Replacement motor for APT
Also known as 20-1050B-2RL 20-1050B-2R K20-1050B2R
For L3 and L4

10-1000-10FT

Strip Curtain 10' x 24" Angle Mount - 8" LT PVC - 4" O.L Clear

10 ft wide x 24" high
Mounting bar sold separately

MG00004

Micanan Belleville Washer 13/16 ID x 1-3/16 x 1/8 (8 required per operator)

PRO-H/HB operator parts
6 required per operator

880LM

LiftMaster Smart Control Panel Sec+ 2.0 ***Discontinued replaced by 880LMW***

Menu-driven panel gives you complete control of the garage door opener; easily view inside garage temperature time and system diagnostics
Equipped with the Maintenance Alert System
On-board programming capability makes it easy to program remote controls and MyQ enabled accessories and adjust settings
Timer-to-Close automatically closes the garage door in 1 5 or 10 minutes; custom setting from 1-99 minutes
Displays Fahrenheit or Celsuis
Motion detector automatically turns on garage door lights when movement is sensed

.......more details

Installation Manual Manuel d'Installation

1019-1-3/8-24'

Rigid Vinyl Bottom Retainer Flat 24' Long

Black - for door thickness of 1-3/8"

MK-00697

Micanan Fraba FOS-1 Exterior Thru-Beam Photocell Nema 4 / 4X 45ft Range

Exterior Through-Beam Photocell
Sensing Distance 45 Feet
UL325/2010 Recognized Component
Comes with Sender Receiver and Brackets
NEMA 4 & 4X

Installation manual

26CW14225-CUT

Truck Door Bottom Panel with Hardware (15" x Cut-To-Size) Painted White for Todco Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels are routed and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white
Comes with 18" pull strap assembly two bottom fixtures standard lift handle two cable anchor brackets seal and retainer.

.......more details

RBH753L5-RH

LiftMaster 3/4 HP 208/230/460 VAC 3 PH Commercial Hoist Operator Logic 5

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

Installation Manual Manuel d'Installation Sell sheet

HD3120

Commercial Inside Slide Lock for 2" or 3" track

Track use: 2" or 3"
Throw: 2-11/16"
Offset from inside face of door to lockbar: 1/2"
Bright zinc plated steel with spring actuated lock bar.
Same as part number 270

.234_2"-LH

Torsion Spring .234 x 2" x 12ft LH Blue/White

Wire size: .234
Inside diameter: 2"
Length: 12 ft

18211

Limit Switch LS1 G3M Male

For use with Rite-Hite dock levelers

733

Fasteners Flat Washer 5/16" Zinc 1000/Box

K20-1050C-2P

LiftMaster Electric Motor 1/2 HP Nema 1

734

Fasteners Track Bolt 1/4-20 x 3/4" 250/Box

Knurled shank
Max torque = 6

41A5483-1C

LiftMaster Circuit Board Assembly *** Discontinued

Assembly includes: Circuit board and end panel
For chain drive units with one light
Fits models 2245 & 2255
Last letter of the part # indicates revision date the most recent product will be sent out
Also known as 41A5483-1 41A5483-1B

SLT4-20

Rolling Steel 3" Crowned Slat 20-ga Galvanized

230404

Linear Motor Control Board 5 Relay (w/Brake)

For commercial door operator

IPAC

LiftMaster Internet Enabled Outdoor Access Control System with VoIP Technology

LiftMaster® IPAC (Internet Protocol Access Control) is the first Internet-enabled outdoor access control system with Voice-over Internet Protocol (VoIP).
By harnessing the power of a high-speed connection IPAC’s innovative technology allows you to work smarter and more efficiently and its contemporary design features a durable enclosure which enhances your property’s image.
Make updates 24/7 through an IP address (no software to install) so you never have to take IPAC offline.
Manage resident info from any browser on your LAN so you do not physically visit the unit.
VOIP technology eliminates long distance fees and will be replacing old analog phone lines.
50000-resident capacity so you’ll never run out of system memory.

.......more details

Installation Manual Sell Sheet

1003-4"-PER-FT

Bottom U-Rubber 4" Black Sold per Foot

MOUNTSHAFT001A

Manaras Clutch Shaft Kit for MJH

Input / clutch shaft kit for MJH built after 1999

Drawing

772

Fasteners Lag Screw Hex Washer High Profile 5/16" x 2" 1000/Box *** Temp. NLA

7/16" Head
Hex washer high profile head

Z9211-1

Stationary Cone Tool 1-3/4" & 2"

Easily dislodges the cone from the torsion spring

39537R.S

Genie Control Board

Replaces any circuit board starting with 37028
Does not come with new housing
Compatible with models 1022 1024 1042 1026 2022 2024 2042 2026 and 2027

BOARD105AGF

Goff Replacement Control Board Non Monitored for Manaras Op

Same as 32042
Not available from Manaras

MK-318-2

Skylink 2-Button Keychain Transmitter

Easy to program.
Remove key fob from the car for enhanced security.
Compact-size 2-button transmitter can operate two garage doors with GB-318C Garage Door Receiver (sold separately).
3V Lithium battery included.
FCC/IC approved.
Works Mastercraft made by Skylink

.......more details