Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search 1 HP
420001

Linear Wireless Keypad Multi-Code 300 MHz

  • Compatible with 300 MHz Multi-Code receivers
  • 4-digit access code
  • Backlit keys
  • Weather-resistant keyless entry station transmitter
  • Easy access to battery
  • Power: 9-volt battery
  • Codes: 1024 (set by dip switches)
  • RF frequency: 300 MHz
  • Dimensions: 2.75" W x 6.25" H x 1" D
  • Same as: MCS420001
BCSI-HV-100-21

Industrial Slide Gate Operator Variable Speed 1 HP 240V 1 Ph with Heater ** Price by Quote Only

  • Heavy-duty alminum cabinet Nema 3R
  • Programmable logic controller
  • Adjustable friction clutch
  • Thermostat controlled heater
  • Opening / Closing speed of 24" / sec
  • Nema 4 control panel
    • .......more details
Installation manualSell sheetBrochureInstallation overviewDessin de installationDiagnostics and troubleshootingDiagnostics et dépannage
26-945255

Truck Door Intermediate Panel (15.5" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
26-942255

Truck Door Bottom Panel with Hardware (15.5" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Primer Finish
  • Comes with 18" pull strap assembly two bottom roller shaft covers and stud plates standard lift handle two u-bolts flexible PVC bottom seal and aluminum seal retainer.
    • .......more details
.262-258-R

Cut-to-Length Torsion Spring .262 x 2-5/8" Right Hand Wound Red/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
9150000620

3/32" Sleeve ONLY 100/pkg

  • Sleeves only 100 per pack
MK-00157

Micanan Intrinsically Safe Modification (Safepack)

  • Modification available for add-on to certain models only
RESET012

Manaras Resettable Overload Fuse 15A 1 Phase

D6375-164

Cable Drum High Lift 164" 1" Bore Torque Force Pair

  • Maximum hi-lift: 164"
  • Capacity: 800 lbs per drum
  • Cable length: Floor to shaft center 181" minus amount of Hi-Lift
  • Cross reference: DNS 410-164 OMI 164HL M162-4165
CPT-210-K5

Miller Edge Non-Monitored End Plug Kit

  • For use with CPT-210-50 bulk extrusion
  • Kit includes: 5 wired 5 non-wired end-plugs 1oz tube of adhesive
DL91201

LiftMaster HID PROX 1346 ProxKey III *Discontinued Replaced by LMPK3-ST*

  • Pocket size key fob
  • Low cost entry level compatible with HID Prox Readers.
7001-WG-16-CO

Residential Wood Grain Side & Top W/S Cherry Oak 16' Long - Painted Screws to Match

  • Cherry Oak retainer with Cherry Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
    • .......more details
9150000623

3/16" Sleeve ONLY 100/pkg

  • Sleeves only 100 per pack
97799

Marantec Shark Tooth Position Reference Tab Belt Rail (96834)

  • Same as part number 96834
  • For belt rail
Replacement Instructions
VBELT_4L400

Lynx VBelt 4L 40"

  • Fits Lynx MCJH operator
26CW94322

Truck Door Bottom Panel with Seal (12" x 98") Painted White for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
  • Comes only with bottom retainer and seal (installed)
    • .......more details
CB5320500-KOR

Cable 5/32" 7x19 500' Galvanized Supreme

  • Galvanized cable 5/32" 7x19 500ft spool.
  • Cable break strength: 2800 lbs
  • A higher quality cable compared to the Chinese cable.
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
Comparison charts
.295-334-R

Cut-to-Length Torsion Spring .295 x 3-3/4" Right Hand Wound Blue

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
G658056

LiftMaster Counterweight for BG790 Arm

  • For 17' gate arm and up
  • For use with various LiftMaster® Barrier Arm Gate Operators (BG790) and Perimeter Access Solutions.
  • Also known as: 108056 088056 10-8056 G658056 G088056 10-8056M
24-MAG-STRAP

Magnetic Hinge Strap 24" Black Set of 4

  • Decorative hinge strap only.
  • Black flexible magnetic material with deep embossed design
OMT-6112-ECB

Manaras Medium-Duty Trolley Operator 1/2 HP 120V with Elect. Circuit Board Non-Monitored

  • Designed for use on smaller and low-cycling industrial standard lift sectional doors.
  • It features a high starting torque intermittent-duty industrial type motor and a quick release disconnect arm.
  • The operator is available with the new Electronic Control Board (BOARD 070) with or without the option of electrical control for MONITORED external entrapment protection devices (UL325-2010 compliant).
  • Maximum Door Height: 14' (4260 mm)
  • Back Room: door height + 3'11" (1175 mm)
  • Head Room For Tracks: 5" (127 mm) above the highest point of door travel
    • .......more details
Installation ManualSell Sheet
SBPFL205-16

Pillow Block Flange Bearing Football Style 1" Bore SBPFL205-16

2376.162_18.750

Whiting Torsion assembly .162 wire size 18" spring length 75" shaft

CONTACTOR043

Manaras Reversing Contactor Allen Bradley 16A-24VAC

  • AB #100-C16*10
BK022/PR

Commercial 3" Aluminum Bottom Bracket with Cable Adjustment Sold as a Pair

  • Rating: 2200 lbs max per door
  • Use with: 3" straight track
  • Aluminum bracket with zinc plated hardware
  • Sold as a pair (includes one left and one right).
K-LA400

LiftMaster Primary Replacement Arm Service Kit for LA400 Original Silver Arm

  • Replacement arm only - no stripes old style
RS10311

Roller 3" Steel 11" stem 10 ball

  • Steel Roller Wheel diameter: 3"
HBFST-BC

Keyed Control Switch with Best Cylinder

  • NEMA 1
  • TAMPERPROOF FLUSH MOUNT
  • TWO POSITION (OPEN-CLOSE) WITH STOP BUTTON
  • CENTER RETURN
  • SINGLE GANG BACK BOX
  • STAINLESS STEEL FACEPLATE
    • .......more details
41A5507-B

LiftMaster Receiver Logic Board for 2500 (390 Mhz) ** Discontinued

  • With end-panel
  • Also known as 41A5507 41A5507B
27-48-140

Extension Spring 8' Door - 140 lbs Blue

  • Single - Loop
  • 27" long 48" stretch 140 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
27-48-120

Extension Spring 8' Door - 120 lbs Green

  • Single - Loop
  • 27" long 48" stretch 120 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
H12G09-SS

Hinge #9 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
27-48-100

Extension Spring 8' Door - 100 lbs Tan

  • Single - Loop
  • 27" long 48" stretch 100 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
H12G08-SS

Hinge #8 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
H12G03-SS

Hinge #3 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
H12G04-SS

Hinge #4 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
41ASWG-0119

LiftMaster Release Keys for LA400 & LA500 Qty: 2

EP2986

Exhaust Port 5" non latching long barrel

  • 5" inside diameter 2" sleeve - non latching.
  • Includes fasteners & gaskets.
  • Polished aluminum finish.
15-3619

LiftMaster Sprocket 50B19T 1-1/4" x 1/4" 2-SS

MP-00024

Micanan Auxiliary Chain Disconnect for Pro-T TB

  • Allows for operation of a door by an auxiliary chain hoist.
  • Hoist mechanism is coupled to front end of drawbar
  • MUST specify door width and position of hoist (left or right)
USVD-4X

EMX Ultra Sonic Vehicle Detector

  • The USVD-4X Drive Thru Vehicle Sensor uses patent pending Triangular Planar Array (TPA) technology to detect the presence of a vehicle.
  • The USVD handles any drive thru operation such as fast food banking pharmacies car washes and parking garages.
  • The USVD is simply mounted on a post or order box and aimed at the location where a vehicle would pass to initiate a transaction. No set-up or adjustments required.
  • Aux. relay settings for pulse on ENTRY EXIT or BOTH
  • Output delay option for 1 2 and 4 seconds
  • Operating range: 1ft. – 5ft.
    • .......more details
Installation ManualSell Sheet
PD180CBT30Q

Carlo Gavazzi Photoelectric Through-Beam Receiver 30M

  • Receiver only. If emitter is required order PD180CBT30MU
  • For Industrial doors and Gates
  • Range: 30M
  • Relay output
  • Supply voltage receiver: 12-24VAC/DC
  • Dimensions: 180m x 51 x 49m
    • .......more details
Installation Manual
K75-12492

LiftMaster Brake Kit 115V Units MH

MWTA12

Miller Edge Transmitter with Audible Alarm Small *** No Longer Available

  • The MWTA12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
  • It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
  • The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
  • The gate or door stops movement and will then reverse the direction of travel.
  • Comes with an Audible Alarm feature that activates when the battery is running low and needs to be replaced.
  • Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided.
    • .......more details
Installation ManualSell Sheet
2G-RIGHT

Rolling Steel 2" Curved Stamped Endlock Right Hand

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are at both ends of every slat.
  • Rivets included with endlocks
2522

Whiting Thrust Washer

  • Used on Whiting balancer assemblies
SLT4-22P

Rolling Steel 3" Crowned Slat 22-ga Primed

342.115

Whiting Intermediate Panel Tongue & Groove 11-1/2" x 96" Price on Request

  • Standard size panel primer only
GH505-L5

LiftMaster Gearhead with Brake 1/2HP 575V 3P L5

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
.225-2-5/8-RH-C

Torsion Spring .225 x 2-5/8" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .225 ID: 2-5/8" Length: 12 ft
RN0039-SS

Roller 3" White Nylon 9" Stainless Steel Stem Double Sealed Bearing

  • A supreme double sealed bearing roller that never requires lubrication
  • Ideal for high usage and high moisture areas ie..carwash
  • 7/16" stainless steel shaft.
  • 200 lb load 100000 cycles of a 12' door
  • Stem Length - 8.312" Overall Length - 9.25"
RN0034-SS

Roller 3" White Nylon 4-3/4" Stainless Steel Stem Double Sealed Bearing

  • A supreme double sealed bearing roller that never requires lubrication
  • Ideal for high usage and high moisture areas ie..carwash
  • 7/16" stainless steel shaft.
  • 200 lb load 100000 cycles for a 12' door
  • Overall length is 5-1/2” and the shaft (stem) is 4-3/4” which includes the shoulder.
PROBE-50

EMX CARSENSE-101 Direct Burial Probe with 50' Lead Wire

  • Wand only
  • Requires CS101 (Carsense-101)
41A7276

LiftMaster Wear Pads 4/pkg Square Rail Only

  • Fits square trolley rail only
  • Same as 183A163
MQ00012

Micanan Adjustable Cable Stopper Gold C/W Set Screw Sold per piece

  • Used on all Micanan waterproof and corrosion proof units that have brakes as well as all explosion proof units.
  • Comes with set screw 3/16” x ¼”
BSG12-24LED

Devanco Stop and Go Light Black Housing 12-24V LED

  • LED Traffic Light Red/Green Dock Light
  • Weather-proof 2 piece housing with highest available UV rating
  • Wide input voltage range of 10-32V AC/DC eliminates the need to stock 12V and 24V models.
  • Ultra bright LED's for easy viewing in direct sunlight
  • Lenses measure nearly 4" in diameter
  • Requires 4 wall mounting screws 1/4" or 5/16" thread - not supplied
    • .......more details
Installation InstructionsInstructions d'installationSell Sheet
OGH-6112-ECB

Manaras 1/2 HP 120V 1Ph Gear Head Operator with Elect. Circuit Board

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
Installation ManualSell Sheet
OTBH-6233-1-ECB

Manaras Trolley Operator 3/4 HP 208V 3 Ph with Electronic Circuit Board

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
Installation ManualSell Sheet
OSH-6434-ECB

Manaras Opera-SH 1 HP 480V 3 Ph with Electronic Circuit Board

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation ManualSell Sheet
OHJ-6213-ECB

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 240V 1 Ph with Elect. Circuit Board

  • 25 cycles per hour 100 cycles per day
  • An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
  • Specifically designed to motorize grills when a manual egress is required
  • Mechanical brake
  • Hoist on right standard
  • Full overload protection
    • .......more details
Installation ManualSell Sheet
37407

Doorlec Reversing Contactor BF9 24VAC

T751L5

LiftMaster 3/4 HP 115/230V 1P Commercial Trolley Operator Logic 5 *** No Longer Available

  • Trolley low profile with brake
  • Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
  • T operators are directly attached to drive and control the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
Installation ManualManuel d'InstallationSell sheetBrochure
CAP590

Capacitor 110/125VAC 590-708MFD

  • AC electrolytic capacitor
  • 21uf to 1200uf
  • 110VAC to 330VAC
  • -40 to 149 Degrees F
  • AC Electrolytic
  • Quick Connect Terminals
    • .......more details
MODKIT065B

Manaras Trolley Hoist #41 Brake Release Kit Includes 12' Shaft

  • Modification kit for in-field upgrades
K76-36398

LiftMaster Electric Motor 1/2HP 24VDC for CSL24V / CSW24V

  • Replacement motor with improved brush assembly for CSL24V and CSW24V gate operators
PPK3M

LiftMaster Passport MAX 3-Button Keychain Remote

  • Provides total control with one remote for gated communities and commercial properties.
  • Compatible with the PPWR Receiver for gate access control all 315MHz Security+ LiftMaster and Elite Series Gate Openers and all LiftMaster Garage Door Openers manufactured since January 1995
  • 2x the range of standard remote controls
  • Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
Programming InstructionsInstructions de programmationSell Sheet
R5997

Shaft Collar 7/16" ID x 7/8" OD x 7/16" W Zinc

  • Axial Load: 950 LBS
  • Screw length: 1/4"
  • Screw type: Socket set screw
  • Solid steel collar with set screw
18004B

Genie Motor Start Capacitor 220VAC 50-60 MFD

  • Compatible with most 1/3 HP Genie & Overhead operators
6062

Programmable Timer

  • 12VDC or 24VDC operation is selectable
  • Functions include: One shot Delayed release Delayed operate Delayed pulse and Pulse / Flasher.
  • Momentary relay activation at the end of a desired timing cycle eliminating the need for having to use 2 timers to achieve this function
  • LED indicates relay is energized
  • Form C relay contacts are 8 amp at 120VAC / 28VDC
Installation instructions
798

Fasteners Cotter Pin 3/32" x 1" 100/Bag

K204C0211

LiftMaster Torroid Transformer

  • Transformer replacement kit for use with various LiftMaster® Commercial Slide and Swing Gate Operators
MTAW22B-R

Miller Edge MT22 Air Wave Black Right Hand Sold by the Foot

Installation ManualSell Sheet
OTBH-6113-1-ECB

Manaras Trolley Operator 3/4HP 120V 1Ph with Electronic Circuit Board

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
Installation ManualSell Sheet
H8064HCLL

Polycarbonate Hinged Enclosure Clear Cover Locking Latch

  • Dimensions: 8 x 6 x 4
  • Stainless Steel locking latch
  • Nema 4X
37408

Doorlec Reversing Contactor BF9 120VAC

MA022

LiftMaster Arm Bolt

  • For use on Mega-Arm gate operator
  • Sold individually
  • 5/16-18 x 29" hex head
GH103-L5

LiftMaster Gearhead with Brake 1 HP 208/230/460V 3-Phase Logic 5

  • Includes CPS-U photoeyes
Installation ManualManuel d'InstallationSell sheetBrochure
831T

Allstar Stationary TransmitterO/C/S 3-Btn 1-Door 318 MHz 107483 *** To extent of inventory

  • Open/Close/Stop stationary remote for 1 door.
  • Designed for commercial automatic door and gate operator applications.
  • This transmitter can operate a single receiver connected to one operator
  • Compatible with 3-channel Allstar and MVP receivers
  • Easy access to battery and coding switch
  • Power: 9-volt battery
    • .......more details
Programming Instructions
CP-EB-MCJ-34115

Lynx E-Box for MCJH 3/4HP 115V 1Ph

  • Complete electrical box
MK-00719

Micanan Replacement Antenna for On-Board & External Receiver

  • Approx. 8" long
778

Fasteners Hex Head Bolt Gr 5 5/16-18 x 1"1000/Box

  • 5/16" bolt has 1/2" head
  • Max torque = 12
  • Full thread
  • Grade 5
775

Fasteners Hex Head Bolt 1/4-20 x 3/4" 1000/Box

  • 1/4" bolt has 7/16" head
  • Max torque = 6
  • Full thread
RBH501L5-LH

LiftMaster 1/2 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5 *** To Extent of Inventory

  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Brake standard on all RBH operators
  • #48 chain #50 output sprocket chain
  • Comes with CPS-U photoeyes and 02-103 O/C/S push button
    • .......more details
Installation ManualManuel d'InstallationSell sheet
772

Fasteners Lag Screw Hex Washer High Profile 5/16" x 2" 1000/Box *** Temp. NLA

  • 7/16" Head
  • Hex washer high profile head
36-RWB-PAIR

Winding Bars Round 36" Set of 2

  • Cold rolled hardened steel.
  • Machined to 1/2" at one end with 5/8" outside dia. on the other.
  • Sold as a pair.
CH505L5-RH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 575 VAC 3 Ph Logic 5 Right Hand

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with CPS-UN4 photoeyes
Installation ManualManuel d'InstallationSell sheetBrochure
RS1039-C

Roller 3" Steel 9" stem 10 ball Torque Force

  • Steel Roller Wheel diameter: 3"
  • Working length: 8.5"
  • Overall length: 9.64"
  • Box qty: 75
H501L5-RH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 115/230 VAC Logic 5 Right Hand *** No Longer Available

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
029C98290

W-Style Complete Replacement Door White Stainless Steel Pkg 029C98290

  • Manufactured to exact size fully assembled tracking and spring assembly included.
  • 98" w x 90" h
  • Price varies according to size
S2TR2641E2M

Erone 2-Channel Master Transmitter 433MHz

  • One master transmitter is required for each multi-user receiver for doing the programming.
  • Range in open space: 850ft or 250 m
  • One 12V lithium battery included
  • Bronze body with yellow buttons.
Sell SheetBrochure
029-98200

W-Style Replacement Door White Stainless Steel Package 029-98200

  • Replacement door size between 96-1/4" - 98" wide x 90-100" high
  • Painted white
  • Stainless steel package
  • Includes Hinges Rollers and Cable
178B34

LiftMaster Straight Door Arm

  • Will work with most residential garage door openers
  • Also known as: 012385041783 178B33 178B34 4178B0034B
111854.0002

Overhead Logic Board for RSX 3/4 & 1 Hp

  • Description: KITPCB1PH3/4-1HPSX/HXUL10
  • For RSX ad RHX models 3/4 & 1 Hp Single phase operators
MOFT20-M14-8

Carlo Gavazzi Photoelectric Sensor Thru-Beam Transmitter

  • Maximum sensing distance is 20 meters
  • 11-pin
  • Waterproof for harsh environment i.e. water dust steam etc.
  • To be used with amplifier series S142.
  • Supplied with 15 m of shielded cable.
  • For receiver unit order part no. MOFR-M14-8.
    • .......more details
Installation Manual
9150000701

Safety Cable for Extension Spring 3/32" 7x7 10' Sold as a Pair

  • Looped on one end the other is raw (no stops)
  • Used to wrap around the body of an extension spring to contain the wire should the spring break.
1104-10FT-CHARC

Residential Side & Top PVC Weather-Strip with cap 10' Long - Charcoal (H)

  • Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
CLUTCH-SHAFT-AS

Lynx Complete Clutch Shaft Assembly for HDC Operators 3/4" x 17-1/2"

  • Fits all HDC operators - waterproof or not.
21-10298

Transformer 100VA

  • Multitap Transformer 120/208/277/575V Primary 24V Secondary 100VA 50/60 Hz
  • Fused at 5A
NTE5326

Bridge Rectifier 25A 600V

  • Bridge Rectifier Converts AC to DC voltage
  • For powering DC accessories when AC transformer present
  • Small size with convenient mounting hole in center
  • Same as MCCM2506-RH
Characteristics
PED72

Pedestal Post 72" Gooseneck Pad Mount

  • Black powder coat finish
  • Faceplate with universal hole pattern to fit almost any access device
  • 2" x 2" square post
  • Neck is bent with a 6 in. center radius giving a tight professional look