Devanco Canada - Get The Right Garage Door Opener‎ and Parts

PRO-HHD-7511U-R

Micanan 3/4HP 115V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

3/4 HP115V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included
Emergency chain hoist with electrical cut-off for manual operation
Enough Hoist hand chain included for 16’ high standard sectional door
Sealed ball bearings on the output and intermediate shafts roller bearings on clutch shaft
Solenoid Actuated Brake drum brake for quiet reliable braking
Door speed approx. 8-9”/second but can be adjusted by changing the included 18 tooth sprocket
2 Year warranty
Shipping weight 110lbs

Installation manual Specification sheet

CP-SW-AT

Lynx Single Limit Switch

H14G06

Hinge #6 x 14 gauge ** To extent of Inventory

Bright zinc plated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 2-3/4" wide
#6 position
Use between sections 6 and 7
Same as part number 246

.......more details

I500

Erone 1100lbs Exterior Maglock Surface Mount Stainless *** To extent of Inventory Repl. by ESM500

1100 lbs holding force ( VS15R)
12/24Vdc – Current Draw: 550mA @ 12Vdc – 280mA @ 24Vdc
220mm (H) x 64mm (W) x 40mm(D) (8.6in x 2.5in x 1.5in)
Exterior applications & High-traffic areas
Includes monitoring capability
Stainless steel

.......more details

Installation manual Manuel d'installation Sell sheet Drawing

SEL2641R433-Z4

Erone 4-Relay Stand Alone Receiver 433MHz

Up to 85 transmitter keys
2 NO relay + 2 NO/NC relay (24VA)
Self-learning memorization
Standard pulse output Relay number 4 can be setup to latched output
Can be used for O/S/C
Power requirements: 12/24Vac/dc

.......more details

Sell Sheet Brochure Wireless System Chart

CONTACTOR044

Manaras Schneider Reversing Contactor 12A-24VAC

Reversing contactor with 24V coil
Same as part # LC2K12107B7
Demensions: 3.5" long x 2.25" wide x 2.25" high
Use 03-8024K as possible replacement

TIMER031

Manaras Timer 24/240V 1s-100h *** To Extent of Inventory

This timer-to-close can be added to any Commercial garage door opener.
Use with RELAY022 (8-pin base) if required.
Schneider Elect. part no. RE88867215

Adding a timer

BRAKEPART018

Manaras Brake Shoe Assembly Kit

Kit includes SHOE001 & SHOE002 for old brake system.
Fits all Manaras operators except gear head made prior to 1999.

Drawing

DISCONNECT001

Manaras Floor Level Disconnect Lever

2234.596

Whiting Coldsaver Bottom Panel 13-1/2" x Max 96" with lock seal and retainer ** Cut to Length

Fits Coldsaver Roll-Up Doors
1-1/8" thick 96" wide
Includes Lock and keeper

2237.096

Whiting Coldsaver Intermediate Panel 13-1/2" x 96"

Fits Coldsaver Roll-Up Doors
1-1/8" thick 96" wide

9931MT

Allstar 1-btn Mini Transmitter 109391 318 MHz ** NLA

Open/Close mini remote for 1 door
Compatible with Allstar and MVP receivers
Tab for key ring
Power: 12-volt battery
Codes: 19683 (set by nine trinary dipswitches)
RF frequency: 318 MHz

.......more details

Programming Instructions

MINI-T

Linear 1-Channel Delta3 Key Ring Transmitter 310 MHz (DNT00026)

Activates one Delta-3 receiver
Test/operate LED
Key ring not supplied
Power: 12 V battery
Frequency: 310 MHz
Codes: 256 (set by dip switches)

.......more details

Programming Instructions

DRQP

Linear 1-Channel Delta3 Gate Receiver 310 MHz ** Available to extent of inventory

1-Channel Gate Receiver
High-sensitivity short-range radio receiver
Operates in conjunction with the 9-inch local antenna (supplied).
Designed for use with automatic gate operators or systems where a remote antenna is needed.
Same as: DNR00013P

Installation Manual

8833T

Allstar 3-btn 3-Door Transmitter 108817 318 MHz

Open/Close remote for 3 doors
Compatible with Allstar and MVP receivers
Visor mounting clip supplied
Power: 9-volt battery
Codes: 6561 (set by trinary dip switches)
RF frequency: 318 MHz

.......more details

Programming Instructions

HAR-11

EMX Wiring Harness 11-Pin for D-TEK-MVP 5111-1

Universal 11-pin harness

7176.225_31.93

Whiting Heavy Duty Torsion Assembly .225 x 31" shaft 93"

300BL

3" Light Brush Insert 6ft Long

Polypropylene bristles
Same as model MS1705

4003-12FT

Aluminum Retainer only for Light Brush 12' Long 90 and 180 degree

For angle application (90 degree & 180 degree).
For use with Light Brush or Vinyl Insert.

4002-12FT

45 Degree Aluminum Retainer for Light Brush 12' Long 45 degree

For angle application (45 degree)
For use with Light Brush or Vinyl Insert.

1019-1-3/8-8'

Rigid Vinyl Bottom Retainer Flat 8' Long

Black - for door thickness of 1-3/8"

1005-1-3/8-16'

Aluminum Bottom Retainer U-Shaped 16' Long

For door thickness 1-3/8"

1004-134-24'

Aluminum Bottom Retainer 1 3/4" U-Shape with Reinforcement 24 ft***Actual Length 24'4"****

For door thickness 1-3/4"
DIE # ES19244

1003-2-12'

Aluminum Bottom Retainer L-Shaped 12' Long

For 2" thick doors.

1003-2-10'

Aluminum Bottom Retainer L-Shaped 10' Long

For 2" thick doors.

1104-16FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 16' Long - Black (B)

Black rigid vinyl retainer with black flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-8FT-DK-BRN

Residential Side & Top PVC Weather-Strip with cap 8' Long - Commercial Brown (DN)

Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

HSC-600-B

Bench Swager 1/16" - 3/16"

Swages 1/16" 3/32" 1/8" 5/32" or 3/16"
Wire rope cutting capacity 3/16”
Made in Japan

BLOCK-RED

Spring Repair Blocks .3750-.4305 Pair

For the temporary repair of a broken spring.
Wire size: .3750 - .4305

BLOCK-YELLOW

Spring Repair Blocks .3175-.3625 Pair

For the temporary repair of a broken spring.
Wire size: .3175 - .3625

24-RWB-PAIR

Winding Bars Round 24" Set of 2

Cold rolled hardened steel.
Machined to 1/2" at one end with 5/8" outside dia. on the other.
Sold as a pair.

25-42-300

Extension Spring 7' Door - 300 lbs Tan w/ clip

Double - Loop
25" long 42" stretch 300 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

25-42-130

Extension Spring 7' Door - 130 lbs Yellow

Double - Loop
25" long 42" stretch 130 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

91-00402

Truck Door Rib Neck Carriage Bolt 1/4"-20 x 1.25" (9/16" head)

Zinc plated finish
Use rib neck carriage bolts with lock and keeper assemblies and hinge installations
Rib neck carriage bolt allows tamper proof installation with a rivet lock and eliminates the nut being installed externally for security.

28-02101

Truck Door 2" Vertical Track and Right Angle Assembly 106.5" Roadside (LH) for Whiting Roll-Up Doors

SPECS: Length: 106.5" Fits door sizes: 91" - 100" high
Assembly includes: Right angle mounting track Vertical track and Torsion bracket
Cross Reference: W #2275-2
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints

27-24403

Truck Door Dual Torsion Spring Assembly 93/35 for Whiting Roll-Up Doors

Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
Springs are treated with rust preventative
Roadside cable drum is color coded RED
Specs: Shaft Length: 93" Spring Length: 35" Wire diameter: .187 Winding cone color: White

27-20304

Truck Door Cable Drum and Bearing Curbside (RH) for Whiting Roll-Up Doors

Black nylon drum with bearing
Cable drums are grooved to prevent cables from binding or wearing prematurely.
Angle of cable slot determines Left or Right drum (Left = Red)
Cross Reference: 2548

27-20127

Truck Door Spring Spacer 35" long for Whiting Roll-Up Doors

Extruded PVC construction with zinc plated thrust washer.
Cross Reference: 2471

26-14525

Truck Door Intermediate Panel (15" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

25E10271

Truck Door Stud Plate for Bottom Roller Black E-coat finish for Whiting Roll-Up Doors

Steel construction Black E-coat finish
Stud plate for 1 stud
Cross Reference: W #1370

DM4X8

Cable Drum Standard Lift 8' 400-8 Pair

8' Standard Lift aluminum die cast alloy.
Pair includes: (1) LH and (1) RH Color coded: Red=LH and Black=RH
Max. Door Height: 8'-1".
Rated Lift per Drum: 265 lbs
Max. Cable Diameter: 1/8"
Mounting: 1" tube or solid shaft with 1/4" keyway

.......more details

25E10003

Truck Door Roller Cover for End Hinge Black E-coat finish for Whiting Roll-Up Doors

Steel construction Black E-coat finish
Cross Reference: W #1208 T #70161

H11G10

Hinge #10 x 11 gauge

11 gauge # 10 hinge - 0.92 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

H11G06

Hinge #6 x 11 gauge

11 gauge #6 hinge - 0.79 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

RS1024

Roller 2" Steel 4" stem 10 ball

Steel Roller Wheel Diameter: 2"
Working Length: 3.5" Overall Length: 4.5"
Box qty: 150 Box weight: 53.3 lbs (2-4-10 steel)

903024ORBG

Operator Reinforced Bracket 24" Galvanized

Comes with clevis & clip pins. 12 per carton.

BK258/PR

End Plate 2-5/8" flanged with bearing 13GA Sold as a Pair (L & R) (EBF 258)

Sold as a pair
Box quantity: 30

25-10276

Truck Door Universal Center Hinge Flush Mount **To extent of inventory

Steel construction Zinc plated finish
Eliminates routing of panels for easier installation
Cross Reference: H-325709

25-10300

Truck Door Cable Anchor Bracket Zinc

Steel construction Zinc plated finish
Allows proper rotation of cable head
Cross Reference: T #61204 W #4004 240000

25-10200

Truck Door Top Bracket Assembly for Todco Roll-Up Doors

Steel construction Zinc plated
Heavy-duty design
Assembly includes: Base Slide Bolt & Washer
Cross Reference: T #69433 W #4039

6X16PO50

Devanco Loop 6' x 16' pave-over 50' lead-in

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

4X12PO50

Devanco Loop 4' x 12' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

4X6PO50

Devanco Loop 4' x 6' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

1104-9FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 9' Long - White (W)

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with cap to hide screws.

OTBH-6213-1-ECB

Manaras Trolley Operator 3/4 HP 240V 1Ph with Electronic Circuit Board

Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
25 cycles per hour 80 cycles per day
It incorporates a drum-band type solenoid brake.
Tracks are an extra 36 lbs per track
3/4 HP & 1 HP operators come with #41 full roller chain

Installation Manual Sell Sheet

BK100

Spring Anchor Bracket Mini USA Sold Individually

Adjustable residential center bracket
Bright zinc plated 12 gauge steel
Adjustable bearing plate
For 1-3/4" to 2-5/8" ID springs (Adjustable center line 2-3/8" to 4-1/4")
For use with steel or nylon bearings
Bearings NOT included

.......more details

DOORARM001

Manaras Door Lifting Arm Assembly

Complete door arm assembly for all Manaras trolley operators.

BL229-GATE-OP

Automatic Systems Universal Perimeter Raising Barrier Gate 120V

Highly configurable barrier designed for many applications and environments
Numerous accessories offered allowing to meet various installation constraints and various requirements in terms of security
Barrier equipped with control unit allowing operation perfectly adapted to every situation
Change of configuration or operation possible even after initial installation of the product

Bilingual parts catalogue Technical manual

PRO-GH-5023U-R

Micanan 1/2HP 230V 3P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

MK008050

Push Button Standard Residential Non-Illuminated 2 Wire Bell Button

SPST
2 mounting holes
Dimensions: 2.375 x 0.875 x 0.75 inches
Color: Light Gray
Intended for indoor use

CLUTCH-ASY-MCJH

Lynx Complete Clutch Shaft Assembly for MCJH Operators 5/8" x 12-1/2"

MK00488

Micanan Electronic Circuit Board Monitored

Replacement board for PRO-LH (50-11)
Board has terminals P1 & P2
Up to 20 transmitters can be programmed

Instructions Manual

210134

Skylink Pulley Assembly - Belt

Fits Skylink & Mastercraft 046-0266-0 belt model openers

25C20

LiftMaster Screw Drive Coupling K025C0020

45ACT

LiftMaster Circuit Board

Board: Tri-band Security+ 2.0
AC Belt and Chain Drive models
Fits models LC500EVC HD420EVC PD622EVC
Same as 41D7675 1D7675 7675 45ACBL1 45ACBL2 45ACBL3 45ACBL4 45ACBL5 45ACCL1 45ACCL2 45ACCL3 45ACCL4 45ACCL5 45ACBR1 45ACBR2 45ACBR3 45ACBR4 45ACBR5 45ACCR1 45ACCR2 45ACCR3 45ACCR4 45ACCR5 045ACT 041D7675

.243_2-5/8"-RH

Torsion Spring .243 x 2-5/8" x 12ft RH White/Yellow

Wire size: .243
Inside diameter: 2-5/8"
Length: 12 ft

HSO112

Hinge 1/2-Hinge OHD "A" Style 12-ga Stainless Steel

Manufactured with Heavy Duty 12ga. Rust-Resistant 304 Stainless Steel
Laser Cut for a Clean Finish

NUT-14-SS

Nut Stainless Steel 1/4"-20 Flanged Serrated Hex

MK-00061

Micanan Time Delay on Reverse 1.5 sec. 24/110V

In closing cycle door will stop for 1.5 seconds and reverse to fully open

33950S

Genie Down Limit Switch Assembly 138 " Wire

Magnetic limit switch for down direction.
The limit wire is moulded into the limit.
For Genie Excelerator Screw Drive garage door opener models: PRO99-IC CMD9900-IC ISD990-1 ISD990-2 ISD1000-2

CP-MO-34R-123/1

Lynx Electric Motor 3/4 HP-IR 115/230V 1 Ph

Electric motor only with instant reverse

K41-0253-000

LiftMaster Electric Motor INSL24UL

Compatible with LiftMaster® INSL24UL Series Industrial Lite-Duty Slide Gate Operators

GALV-393-6-144-L

Torsion Spring .393 x 6" x 12ft LH Galvanized Orange

Wire size: .393
Inside diameter: 6"
Length: 12 ft
Galvanized Stenciled

OTBH-6532-M-N1

Manaras Trolley Operator 1/2 HP 600V 3 Ph Monitored w/N1 Photoeyes

The OTBH is a heavy-duty low headroom trolley operator
Designed for use on industrial standard lift sectional doors
It incorporates a drum-band type solenoid brake
25 cycles per hour 80 cycles per day
1/2 HP operators come with # 48 (410) roller chain

E14500D

Cable Tie KSPEC STD 50 LB Black 14" Nylon 500/pkg

Length: 15" Width: 5.0MM (0.187")
Low insertion and pull through force
Advanced pawl and teeth design
Angled tail provides quicker initial insertion alignment
Tail finger grips allow easier handling and tightening
Rounded edges provide added safety and eliminate insulation damage

.......more details

2200-983-UPS

Linear Brake and Puck Assembly UPS HSLG

233817

Operator Reinforced Bracket 18-24" Adjustable with Hinge Kit Galvanized

Also known as ARB or ORB brackets
Kit includes: 5/16" Clevis Pin Hitch Pin 1/4-20x5/8" Carriage Bolt 1/4-20 Serrated Flange Nut
Hinge : Male Hinge 13 GA WIDE SD (MATERIAL STEEL 13 GA)

15-50B72QGH

Sprocket 72 Teeth 1-1/4" Bore 1/4" Keyway

For use with various LiftMaster® Logic 4.0/5.0 and MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators

19-50ML-SS

Master Link #50 Stainless Steel

SB3381-PAIR

Garex End Bearing Plate 3-3/8" - 1" Commercial Sold as a Pair

P-9931R

Pulsar 1-Channel Receiver 318 MHz

Allstar compatible
Single channel receiver
24V AC/DC
8 dipswitches 318 MHz

GALV-306-334-144-L

Torsion Spring .306 x 3-3/4" x 12ft LH Galvanized Red

Wire size: .306
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

OMJ-6112-M-N1-RH

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Monitored Circuit Board N1 Eyes Right Hand

Designed for use on standard high and vertical lift sectional doors
Can also be used on small rolling doors and grills
Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
Mechanical brake
Floor level disconnect mechanism which must be engaged for manual push-up operation
14 cycles per hour 50 cycles per day

.......more details

K41-0156-000

LiftMaster Cable Tension Monitor Left Side

For use with various LiftMaster® MAXUM Series DC 700 lbs. to 2200 lbs. Standard-Duty and Extended-Duty Jackshaft Jackshaft Hoist and Trolley Commercial Door Operators
This service kit is compatible with the following MAXUM models: JDC JHDC and TDC.
NOTE: Refer to K41-0157-000 for Right-Side Cable Tension Monitor

EMX-1916-1

EMX Single Gold Hood For IRB-MON2/4X2 1 Piece Only

Gold coloured metal hood (1 hood)

IRB-4X2

EMX Nema 4 Through-Beam Photocells EMX-1250-1 Hood Sold Separately

The IRB-4X2 photoeye is used as a safety reversing or opening device in conjunction with automatic operators.
The IRB-4X2 will work with any control board that accepts dry contact on the input.
The easy to install IRB-4X2 is used with garage doors rolling doors parking barriers and other equipment.
*Not for use in applications requiring UL325 compliance
Thru beam design is not affected by shiny surfaces
Wide 24˚ transmission angle allows easier alignment and increases reliability

.......more details

Spec sheet

XF208VAC12

LiftMaster 208V Transformer Kit 1200

59206

Todco Operator Bearing Shallow Header Roll Up Door

210265

Skylink Case Cover Atoms Pro Logo

9003-200-13-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle 2" Track Bolt On 13' Long - Black

Black rigid vinyl retainer with black flexible vinyl insert.
Reverse angle bolt-on vinyl retainer.
Bolts onto reverse angle steel jamb.

Drawing

50220

Doorlec Lifting J-Arm Assembly Trolley

GEAR001

Manaras Bevel Gear GH/MGH 5/8" 20 Tooth

NINJA-001-BLACK

Rodent Ninja Garage Door Corner Guard Set

Blocks pests from entry
Fills in holes and gaps along garage door frame
Keeps insects mice and unwanted guests outdoors
Kit includes: (1) Right and (1) Left handed Garage Door Corner Guard (6) Self-tapping Screws
Made in the USA