Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Open
7FT-CHAIN-LDO

Linear 7ft Chain Rail for LD050/LS050/LDCO (HCT7C)

  • 7ft chain-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
  • Fully-assembled & pre-tensioned
  • Compatible with Model CHCR-7/8 carriage house I-rail conversion kit
24851

Stanley Traveler Carrier Kit

  • Works with all Stanley chain drive units from 1992-present
  • Same as part no. 9200014
  • Trolley slider for part no. 49563
Installation InstructionsInstructions d'installation
TAC1

LiftMaster Single Line Telephone Access Control with Radio

  • The TAC1 can be connected to two devices such as a door or gate using the two independently controlled relays or wirelessly using Security+ technology standard or any combination of the two.
  • Provides wired communication and secure access control at the gate or door.
  • Measurements: 6" h x 8.75" w
Installation ManualProgramming Instructions
36163R

Genie Dual Frequency Intellicode Receiver 315 MHz & 390 MHz

  • For Genie Intellicode Rolling Code remotes Or Overhead Door Code Dodger remotes using the 315 or 390MHz frequency.
  • 24-Volt 3-Wire Connection For Garage Door Opener And Gate Openers.
  • Accepts Up To 8 Genie Intellicode Or Overhead Door Code Dodger remotes on 315 or 390MHz Frequency. Note: Will not work with the older code switch type of remotes.
M3-2314

Marantec 4-Button Transmitter 315 MHz 97244/122468

  • Same as part # 65893 and 97244
  • Visor mount
  • Includes battery CR2032
Instructions
M3-2312

Marantec 2-Button Transmitter 315 MHz 97243/122436

  • Same as part # 65892 97243 122436
  • Includes battery CR2032
Instructions
25-01575

Truck Door Beverage Body Roll-Up Door Cable

  • Includes one (1) pair of cables
  • Zinc plated tear drop
  • Length: 110 inches
  • Cable eye: 1/4
  • Cable construction: 7 x 7 galvanized
36179R

Genie Traveler Assembly for Screw Drive

  • Fits model 3060 L/M
  • Replaces: 25589R 25589S 25589C 20414R 34107R 20073R & 24357R
DD-KIT

Linear Double Delta Radio Kit (2X DT & 1X DR)

  • Kit includes two DT remotes and one DR receiver
  • Same as: DNP00006
  • Operates on 24 VAC power
  • Codes: 1024 (set by dip switches)
  • RF frequency: 310 MHz
Installation Manual
25605R

Genie Inner Slide Kit for Chain Drive Models

  • The innerslide attaches to the chain and connects the carriage to the chain
  • Works on the following Genie and Overhead Door models:
  • IC250 PMX80 PMX500-IC/B IC250/B PMX85 ALC Series PMX60 PMX300-IC/A RCD Series PMX65 PMX500IC/A PMX75 PMX-IC/B
  • SP99 – SP SERIES LD100-500-100A-550A LAD125-555
  • CM6000-6000A-60-70-80-60S
  • OHD-696 696CD + Others
    • .......more details
WG-305

Devanco White Lithium Grease

  • Provides long lasting lubrication and protection against rust and corrosion
  • Ideal for metal to metal applications
  • Sprays on thick providing a long-lasting protective coating that won't run off
Material Safety Data SheetFiche Signalétique
K75-12858

LiftMaster Clutch Kit for SL595

  • Kit includes: Clutch Pressure plate Torque Limiter Sprocket Assembly Bell Washer Nut Hex Jam Clutch Disc and Keyway
Replacement Instructions
104078

Allstar Wireless Keypad 9931-WKE 318 MHz ** To Extent of Inventory

  • Compatible with Allstar and MVP receivers
  • 4-digit access code
  • Backlit keys
  • Operate LED
  • Power: 9-volt battery
  • Codes: 19683
    • .......more details
Programming Instructions
MK-00493

Reversing Contactor Telemecanique 24V Coil (MK-01179)

  • Same as MK-01179
MGT

Linear MegaCode Gate Safety Edge Transmitter 318 MHz (DNT00068)

  • The MGT is the industry’s only fully supervised gate safety edge transmitter.
  • It automatically sends an hourly status report to the access controller indicating battery condition and if the transmitter is operational.
  • Should the edge sensor be disconnected shorted or tampered with the MGT will report a trouble condition.
  • Features Include:
  • Signals access controller for stop or reverse when safety edge activates
  • No cables or coiled wires
    • .......more details
Programming Instructions
K74-G0589

LiftMaster Hall Effect Sensor

  • For SL595 gate operator
K75-18364

LiftMaster Arm Assembly Kit for SW470

  • Complete arm kit for SW470 gate operator
PRO-W_MOD

Micanan Nema 4/12 Modification

  • This modification provides a TEFC motor N4/12 watertight/oiltight control enclosure waterproof drive and limit chain NEMA4 thru-beam eyes and a watertight/oiltight three-button station.
RS1029

Roller 2" Steel 9" stem- WL 10 ball

  • Steel Roller Wheel Diameter: 2"
  • Working Length: 9.5" Overall Length: 10.5"
  • Box qty: 100 Box weight: 60 lbs (2-9-10 WL steel)
MS00003

Micanan Carriage for PRO-APT / T

  • For model PRO-APT / T
C-200-INSTALLED

Cones 2" Factory Installed (Pair)

  • For do-it-yourself installation use part no. SF200
.295-2-L

Cut-to-Length Torsion Spring .295 x 2" Left Hand Wound Blue

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
12FT-I-BEAM

LiftMaster 12' I-Beam Rail G3712RV / CD1012

309013

Linear 1-Channel Multi-Code Receiver 310 MHz

  • Three tabs for universal mounting
  • One N/O relay
  • Compatible with 310 MHz Stanley and Multi-Code transmitters only.
  • Operates on 24 VAC power
  • One channel
  • Codes: 1024 (set by dip switches)
    • .......more details
Programming Instructions
PS31L-NS11R1M00

Carlo Gavazzi Utility Switch

Installation Manual
.262-134-L

Cut-to-Length Torsion Spring .262 x 1-3/4" Left Hand Wound Red/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.250-134-R

Cut-to-Length Torsion Spring .250 x 1-3/4" Right Hand Wound Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.207-134-L

Cut-to-Length Torsion Spring .207 x 1-3/4" Left Hand Wound Brown

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.283-258-L

Cut-to-Length Torsion Spring .283 x 2-5/8" Left Hand Wound White

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
.283-258-R

Cut-to-Length Torsion Spring .283 x 2-5/8" Right Hand Wound White

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
24858

Capacitor 220/250VAC 53-64MFD

  • Motor start capacitor for 1/3 & 1/2HP garage door openers
  • Same as part number 219110
  • Dimensions: 1.810" D x 3.38" H x 0.50" C
MV00077

Interlock Switch for Sectional Doors

  • Mounts on the door track to prevent the use of the operator when the door is locked
8FT-I-BEAM

LiftMaster 8' I-Beam Rail 3708CH / CD1008

  • I-Beam Chain Drive Rail for model 3595
DTKP

Linear Delta-3 Wireless Keyless Entry 310 MHz

  • Activates multiple Delta-3 receivers
  • 1-8 digit PIN
  • Backlit keys for easy viewing
  • Mounting hardware supplied
  • Power: 9-volt battery
  • Codes: 256
    • .......more details
Programming instructions
ME123-YELLOW-U

Miller Edge Yellow Universal Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualWorksheetSell Sheet
377LMC

LiftMaster Wireless Keyless Entry 315 MHz ***Replaced by 878MAX

  • Compatible with Liftmaster Sec+ garage door openers commercial door operators gate operators and radio control receivers
  • Mounts easily to the door jamb with two screws
  • Compatible with openers built 2005+
  • Replaces 376LMC and same as Chamberlain 956D same as 377LM
  • Includes 9V battery
Programming InstructionsInstructions de programmation
886LM

LiftMaster Motion-Detecting Control Panel Sec+ 2.0 *** To extent of inventory

  • Push button for garage door operation
  • Motion-detector automatically turns on the light when movement is detected
  • 150 degree sensing angle for motion sensor
  • Program remote controls directly from the control panel
  • Light run-time is 4 1/2 minutes with adjustable light timer option
  • On/Off switch for deactivation of motion-detecting function
    • .......more details
Installation Manual
TUBE_SHAFT_10FT

Hollow Shaft 1" x 10'-10" Galvanized 16 gauge

  • When ordering order one foot longer that actual door width
.343_3-3/4"-LH

Torsion Spring .343 x 3-3/4" x 12ft LH Blue/Red

  • Wire size: .343
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.295_3-3/4"-LH

Torsion Spring .295 x 3-3/4" x 12ft LH Blue

  • Wire size: .295
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.273_2-5/8"-LH

Torsion Spring .273 x 2-5/8" x 12ft LH Orange/Red

  • Wire size: .273
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.250_2-5/8"-LH

Torsion Spring .250 x 2-5/8" x 12ft LH Green

  • Wire size: .250
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.243_2-5/8"-LH

Torsion Spring .243 x 2-5/8" x 12ft LH White/Yellow

  • Wire size: .243
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.234_2-5/8"-LH

Torsion Spring .234 x 2-5/8" x 12ft LH Blue/White

  • Wire size: .234
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.218_2"-LH

Torsion Spring .218 x 2" x 12ft LH Yellow/Orange

  • Wire size: .218
  • Inside diameter: 2"
  • Length: 12 ft
.262_1-3/4"-LH

Torsion Spring .262 x 1-3/4" x 12ft LH Red/Yellow

  • Wire size: .262
  • Inside diameter: 1-3/4"
  • Length: 12 ft
365LMC

LiftMaster Universal Plug-in Receiver 315 MHz

  • Compatible with any garage door opener with a simple 2-wire dry contact
  • Includes 2-conductor bell wire
  • Able to accept 8 Security+ transmitters & 1 digital keypad
  • Compatible remotes; 893MAX 890MAX 892LT 373LM 371LM 374UT 375UT
Programming InstructionsInstructions de programmation
829LM

LiftMaster Garage and Gate Monitor Sec+ 2.0 **to extent of inventory

  • This innovative monitor lets you check and close the garage door or gate from any room in the house.
  • Green and Red LED lights indicate whether the garage door or gate is open or closed.
  • Volume controlled audible alert lets you know when the garage door or gate is being opened.
  • Able to monitor and close up to four garage doors or gates.
  • Compatible only with new Sec+ 2.0 MyQ compatible garage door and gate operators.
Programming InstructionsInstructions de programmation
19-3025

Roller Chain #50 Nickel Plated 25ft Length

CP-SW-TD6A

Lynx Switch Light Delay

  • For the old Lynx 455 operators
19-41HL

Half Link #41

  • Half link for #41 chain
  • ANSI Standard Carbon Steel
41AB050-2

LiftMaster Electronic Circuit Board Assembly

  • Assembly includes: Logic board end panel and light sockets
  • For belt drive models with 2-lights
  • Also known as 41AB050-2M
.343_6"-RH

Torsion Spring .343 x 6" x 12ft RH Blue/Red

  • Wire size: .343
  • Inside diameter: 6"
  • Length: 12 ft
.218_2"-RH

Torsion Spring .218 x 2" x 12ft RH Yellow/Orange

  • Wire size: .218
  • Inside diameter: 2"
  • Length: 12 ft
.234_1-3/4"-RH

Torsion Spring .234 x 1-3/4" x 12ft RH Blue/White

  • Wire size: .234
  • Inside diameter: 1-3/4"
  • Length: 12 ft
17335

Doorlec DC-3100T 4-btn O/C/S Compact Transmitter 301 MHz

  • 3 buttons for O/C/S and 1 button for turning lights ON/OFF
  • Includes 12V battery
  • Dimensions: 3-1/4" l x 1.5" w x 1/2" thick
MJ00014

Micanan Brake Shoe and Drum Assembly for Gearhead

  • For Micanan gearhead models: GH GHC GSD
  • Assembly includes both right & left shoe and the drum
T2B-DS

Lynx 2-btn Transmitter Dip Switch 303 MHz

  • Ultra secure mid-size transmitter with 8 dip-switches for coding
  • 2-buttons provides control for 2 Lynx operators
  • Compatible with HomeLink in-vehicle remote control
  • Can be mounted on visor with saddle clip or carried on a keychain
  • Visor clip and 12V battery included
  • Will work with Lynx residential operators built from 2000 and up.
    • .......more details
Compatibility chart
T1B-DS

Lynx 1-btn Transmitter Dip Switch 303 MHz

  • Ultra secure mid-size transmitter with 8 dip-switches for coding
  • Compatible with HomeLink in-vehicle remote control
  • Can be mounted on visor with saddle clip or carried on a keychain
  • Visor clip and 12V battery included
  • Use with receiver (RA-LYNX-RCVR) for open/close on commercial operators
  • Same as model 2211-L (TX)
    • .......more details
Compatibility chart
I500

Erone 1100lbs Exterior Maglock Surface Mount Stainless *** To extent of Inventory Repl. by ESM500

  • 1100 lbs holding force ( VS15R)
  • 12/24Vdc – Current Draw: 550mA @ 12Vdc – 280mA @ 24Vdc
  • 220mm (H) x 64mm (W) x 40mm(D) (8.6in x 2.5in x 1.5in)
  • Exterior applications & High-traffic areas
  • Includes monitoring capability
  • Stainless steel
    • .......more details
Installation manualManuel d'installationSell sheetDrawing
OPH-6533-ECB

Manaras Opera-H 3/4HP 600V 3Ph with Electronic Circuit Board

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
Installation ManualSell Sheet
MOUNTSHAFT014

Manaras Clutch Shaft Kit for Opera-H (OPH)

  • Input / clutch shaft kit for Manaras Opera-H
Drawing
TRANSF143

Manaras Transformer 120/240-24V 40VA

  • Transformer 120-240V Primary 24V Secondary 40VA
BRAKEPART018

Manaras Brake Shoe Assembly Kit

  • Kit includes SHOE001 & SHOE002 for old brake system.
  • Fits all Manaras operators except gear head made prior to 1999.
Drawing
RADIO-KIT004

Manaras plug-in receiver for Board 70 operators 390 MHz

  • Direct ECB plug-in receiver card kit (RADIO-RE101C) for adding or replacing on-site.
  • Maximum 16 transmitters per receiver.
  • Compatible with transmitters RADIOEM101 and RADIOEM103 SD/MD
RADIO-37

Manaras MCR-32 Open/Stop/Close 24V receiver Nema 1 313 MHz ** To extent of Inventory

  • 3-Channel O/C/S receiver controls one operator with MCT series transmitters.
  • Steel Nema 1 enclosure.
  • 24 VAC input voltage.
  • 2 N/O and one N/C relay
  • Commercial antenna Included (Radio029).
  • Replaced by RADIO-RE900A
    • .......more details
Programming Instructions - ECBProgramming Instructions - CONT
MCT-2

Linear 2-btn MegaCode Visor Transmitter 318 MHz

  • Activates two 318MHz MegaCode receivers independently
  • Test/operate LED
  • Visor mounting clip supplied
  • Power: 9-volt battery incl.
  • Codes: 1000000+ (MegaCode format)
  • Dimensions: 2.16" W x 3.75" H x .95" D
    • .......more details
Programming Instructions
200BL

2" Light Brush Insert 6ft Long

  • Polypropylene bristles
  • Same as model MS1703
600BL

6" Light Brush Insert 6ft Long

  • Polypropylene bristles
100BL

1" Light Brush Insert 6ft Long

  • Polypropylene bristles
  • Same as model MS1701
4005-8FT

Aluminum Retainer only for Heavy Brush 8' Long 180 degree

  • For angle application (180 degree)
  • For use with Heavy Brush
4003-6FT

Aluminum Retainer only for Light Brush 6' Long 90 and 180 degree

  • For angle application (90 degree & 180 degree).
  • For use with Light Brush or Vinyl Insert.
1003-5"-150FT

Bottom U-Rubber 5" Black 150' Long

  • 150ft spool of vinyl insert.
1016-ADHESIVE

Adhesive for Storm Shield 6oz tube

  • For use with 1016
Safety data sheet
1015-1-3/4-14'

Rigid Vinyl Bottom Retainer Raised Centre 14' Long

  • Black - for door thickness of 1-3/4"
1006-2-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

  • Black with flexible fin to touch door face.
  • For door thickness 2"
1006-1-3/4-12'

Rigid Vinyl Bottom Retainer U-Shaped 12' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/4"
1006-1-3/4-14'

Rigid Vinyl Bottom Retainer U-Shaped 14' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/4"
1003-1-5/8-14'

Aluminum Bottom Retainer L-Shaped

  • For 1-5/8" thick doors.
1003-1-5/8-10'

Aluminum Bottom Retainer L-Shaped

  • For 1-5/8" thick doors.
1003-1-3/8-12'

Aluminum Bottom Retainer L-Shaped

  • For 1-3/8" thick doors.
7001-14-BROWN

Commercial Side & Top Weather-Strip 14' Long - Brown (DN)

  • Brown galvanized steel with brown dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
7001-7-BROWN

Commercial Side & Top Weather-Strip 7' Long - Commercial Brown (DN)

  • Brown galvanized steel with brown dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
1104-9FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 9' Long - Black (B)

  • Black rigid vinyl retainer with black flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-12FT-DK-BN

Residential Side & Top PVC Weather-Strip with cap 12' Long - Commercial Brown (DN)

  • Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-7FT-DK-BRN

Residential Side & Top PVC Weather-Strip with cap 7' Long - Commercial Brown (DN)

  • Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
TC1

Tri-Code Transmitter 1-btn Visor - DISCONTINUED

  • 10 dipswitch format 3-position slide switch
  • Compatible with Multi-Code 300 & 310 MHz Delta3 & Stanley 310 MHz
  • Discontinued 7/1/13
375LMC Programming InstructionsInstructions de programmation pour 375LMC
BLOCK-RED

Spring Repair Blocks .3750-.4305 Pair

  • For the temporary repair of a broken spring.
  • Wire size: .3750 - .4305
BLOCK-YELLOW

Spring Repair Blocks .3175-.3625 Pair

  • For the temporary repair of a broken spring.
  • Wire size: .3175 - .3625
18-HWB-PAIR

Winding Bars Hex 18" Set of 2

  • Cold rolled hardened steel.
  • Hex shape keeps the bar from rolling away.
  • Machined to 7/16" at one end with a 1/2" outside dia. on the other end
  • Sold as a pair.
1104-18FT-SAND

Residential Side & Top PVC Weather-Strip with cap 18' Long - Sandstone (D)

  • Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Taupe
1104-14FT-SAND

Residential Side & Top PVC Weather-Strip with cap 14' Long - Sandstone (D)

  • Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Taupe
1104-9FT-SAND

Residential Side & Top PVC Weather-Strip with cap 9' Long - Sandstone (D)

  • Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Taupe
7001-10-WHITE

Commercial Side & Top Weather-Strip 10' Long - White (W)

  • White galvanized steel with white dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
1102-10-BLACK

Commercial Side & Top Weather-Strip 10' Long - Black

  • Aluminum retainer with black heavy-duty dual fin vinyl.
32-48-130

Extension Spring 8' Door - 130 lbs Yellow ** Replaced by 27-48-130

  • Double - Loop
  • 32" long 48" stretch 130 lb load
  • Springs sold individually
Spec Sheet
25-42-240

Extension Spring 7' Door - 240 lbs Blue w/ clip

  • Double - Loop end for strength
  • 25" long 42" stretch 240 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
25-42-200

Extension Spring 7' Door - 200 lbs Tan

  • Double - Loop
  • 25" long 42" stretch 200 lb load
  • Sold individually
  • Rated for 10000 cycles
  • Same as part number 120
Spec Sheet
25-42-130

Extension Spring 7' Door - 130 lbs Yellow

  • Double - Loop
  • 25" long 42" stretch 130 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
91-00402

Truck Door Rib Neck Carriage Bolt 1/4"-20 x 1.25" (9/16" head)

  • Zinc plated finish
  • Use rib neck carriage bolts with lock and keeper assemblies and hinge installations
  • Rib neck carriage bolt allows tamper proof installation with a rivet lock and eliminates the nut being installed externally for security.