Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Gate Automation Commercial Door & Gate Operator Accessories
LOOPDETLM

Liftmaster Plug-in Loop Detector for Liftmaster gate operators

  • Plug-in Loop detector for CSW24V CSL24V AND LA500
  • Includes diagnostic and test feature
  • 12VDC/3mA power draw
  • For exit interrupt or shadow loop applications
  • Activates only when a vehicle passes over a loop
  • 8 sensitivity levels plus boost to ensure that vehicles are easily identified
    • .......more details
Installation Manual
50-CP4

LiftMaster Sensing Probe Free Exit 100ft Lead

  • Self-contained free exit system designed to detect moving vehicle and open your automatic gate.
  • Can be installed above or below ground
  • Connects directly to any gate operator without an external output board.
  • Works with powered or solar gates.
  • SPECIFICATIONS: Cable Lead Length: 100 ft.
  • Power Requirements: 8-24 VAC oe 8-30 CSX
    • .......more details
PROBE-100

EMX CARSENSE-101 Direct Burial Probe with 100' Lead Wire

  • Wand only
  • Requires CS101 (Carsense-101)
VMD202-R

EMX Remote Tuning and Adjustment Control Device

  • If you wish to “tune” the sensitivity the accessory VMD202-R will need to be plugged temporarily into the connector.
  • The VMD202-R may then be removed or left in place as desired.
VMD202-100

EMX Vehicle Motion Detector Probe with 100ft Lead Wire

  • The VMD202 Vehicle Motion Detector is the most advanced single-piece vehicle motion sensor on the market today.
  • The probe and its electronics are housed in a slim design that is buried next to a driveway.
  • The VMD202-R Sensitivity Remote Control (sold separately) makes installation and fine tuning simple
  • Probe assembly and wire are water tight and direct burial compatible
  • Harness is pre-wired onto lead wire for easy installation
  • Settings are placed in a non-volatile memory in case of power failure
    • .......more details
Installation ManualSell Sheet
41ASWG-0119

LiftMaster Release Keys for LA400 & LA500 Qty: 2

PROBE-50

EMX CARSENSE-101 Direct Burial Probe with 50' Lead Wire

  • Wand only
  • Requires CS101 (Carsense-101)
LD-11

EMX Base Socket 11-Pin DIN Rail Mountable Black (Was formally Grey)

  • For use with D-TEK detectors (most commonly used)
  • Hourglass shaped
CARSENSE-101

EMX Buried Driveway Alert Sensor XC101-LV Probe Sold Separately (CS101)

  • The CarSense 101 provides a solution for many vehicle detection challenges. Where safety is an issue the CarSense 101 detects moving vehicles in blind areas along a driving path and actuates warning lights.
  • For access control applications requiring free exit the CarSense 101 detects vehicles and actuates gates overhead doors and other parking barriers.
  • Controls and indicators are mounted on front panel
  • Available in 9 - 41 VDC 6 - 29 VAC.
  • Low 2.5 mA standby current consumption makes it an excellent choice for solar power applications.
  • Housed in a small relay-type housing
    • .......more details
Installation ManualSell Sheet
ULT-MVP-2-D-TEK

EMX Industries Multi-Voltage Loop Detector 2-Channel (ULT-MVP-2U)

  • Combines small size with 9VDC to 240VAC input range.
  • Size: 73 x 38 x 78mm
  • ULTRAMETER™ display indicates the appropriate sensitivity setting the vehicle positioned on the loop
  • Ten (10) sensitivity adjustments
  • Four (4) frequency settings
  • Automatic sensitivity boost (ASB) delay fail-safe/fail-secure and infinite or normal (5 min.) presence
    • .......more details
MGR20-Y-2U-04

Miller Edge Sensing Edge Round Yellow 2-Wire Universal Outlet 4ft Long

  • Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
Installation ManualSell Sheet
ULT-MVP

EMX Industries Multi-Voltage Loop Detector (ULT-MVP-U)

  • Combines small size with 9VDC to 240VAC input range.
  • Size: 73 x 38 x 78mm
  • ULTRAMETER™ display indicates the appropriate sensitivity setting the vehicle positioned on the loop
  • Ten (10) sensitivity adjustments
  • Four (4) frequency settings
  • Automatic sensitivity boost (ASB) delay fail-safe/fail-secure and infinite or normal (5 min.) presence
    • .......more details
Operating InstructionsSell Sheet
ME120-BLK-2WIRE-E

Miller Edge Black 2-Wire End Outlet Sold per Foot

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
ME120-C

Miller Edge Aluminum Mounting Channel Sold per Foot

  • 1-1/16" Wide 9/16" High
MGR20-Y-2U-05

Miller Edge Sensing Edge Round Yellow 2-Wire Universal Outlet 5ft Long

  • Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
Installation ManualSell Sheet
MA026

LiftMaster Pad Only Yellow For 12' Arm

  • Pad only - arm not included
SP20W12V

LiftMaster Solar Panel Kit 12V 20 Watt

  • Includes mounting bracket and hardware with 10' cable
Installation guideGuide d'installation
ULTRA-II-D-TEK

EMX Industries Plug-in Loop Detector (2663-1)

  • Features a slim design that is compatible with most gate operators that require a dry contact relay input.
  • No harness required; comes with terminal screw adaptor
  • ULTRAMETER™ (displays optimum sensitivity setting / diagnostic aid)
  • Frequency count/reset switch
  • 10 sensitivity settings
  • Loop diagnostics
    • .......more details
620-101416

Linear GTO Alarm 24VDC Non-Pulsed Apex

ME120-BLK-E-4FT

Miller Edge 2-Wire Black End Outlet 4 ft Long

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualSell Sheet