Devanco Canada - Get The Right Garage Door Opener‎ and Parts

ULT-MVP

EMX Industries Multi-Voltage Loop Detector (ULT-MVP-U)

Combines small size with 9VDC to 240VAC input range.
Size: 73 x 38 x 78mm
ULTRAMETER™ display indicates the appropriate sensitivity setting the vehicle positioned on the loop
Ten (10) sensitivity adjustments
Four (4) frequency settings
Automatic sensitivity boost (ASB) delay fail-safe/fail-secure and infinite or normal (5 min.) presence

.......more details

Operating Instructions Sell Sheet

PROBE-100

EMX CARSENSE-101 Direct Burial Probe with 100' Lead Wire

Wand only
Requires CS101 (Carsense-101)

ULT-PLG-D-TEK

EMX Industries Ultra Loop Plug-In Loop Detector Dual Output

Trademarked Detect-on-Stop technology
Easy install with trademarked UltraMeter display with 10 sensitivity settings
Sold-state output indicating vehicle presence
Ignore cross traffic in tight spaces
Select for automatic sensitivity boost (ABS) delay fail safe/fail secure
Second output for pulse entry/exit normal/infinite presence

.......more details

ULTRA-II-D-TEK

EMX Industries Plug-in Loop Detector (2663-1)

Features a slim design that is compatible with most gate operators that require a dry contact relay input.
No harness required; comes with terminal screw adaptor
ULTRAMETER™ (displays optimum sensitivity setting / diagnostic aid)
Frequency count/reset switch
10 sensitivity settings
Loop diagnostics

.......more details

CARSENSE-101

EMX Buried Driveway Alert Sensor XC101-LV Probe Sold Separately (CS101)

The CarSense 101 provides a solution for many vehicle detection challenges. Where safety is an issue the CarSense 101 detects moving vehicles in blind areas along a driving path and actuates warning lights.
For access control applications requiring free exit the CarSense 101 detects vehicles and actuates gates overhead doors and other parking barriers.
Controls and indicators are mounted on front panel
Available in 9 - 41 VDC 6 - 29 VAC.
Low 2.5 mA standby current consumption makes it an excellent choice for solar power applications.
Housed in a small relay-type housing

.......more details

Installation Manual Sell Sheet

ULT-MVP-2-D-TEK

EMX Industries Multi-Voltage Loop Detector 2-Channel (ULT-MVP-2U)

Combines small size with 9VDC to 240VAC input range.
Size: 73 x 38 x 78mm
ULTRAMETER™ display indicates the appropriate sensitivity setting the vehicle positioned on the loop
Ten (10) sensitivity adjustments
Four (4) frequency settings
Automatic sensitivity boost (ASB) delay fail-safe/fail-secure and infinite or normal (5 min.) presence

.......more details

PROBE-200

EMX CARSENSE-101 Direct Burial Probe with 200' Lead Wire

Wand only
Requires CS101 (Carsense-101)

ULTRA-DIN

EMX Industries DIN Rail Mount Vehicle Loop Detector

Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature
Easy to install and setup with the ULTRAMETER™ sensitivity display
Low current draw – green product
Easy identification of interference problems using the crosstalk and RFI interference display
Fits into small operator housings saving space size: 80 x 23 x 84 mm
10 sensitivity settings

.......more details

VMD202-R

EMX Remote Tuning and Adjustment Control Device

If you wish to “tune” the sensitivity the accessory VMD202-R will need to be plugged temporarily into the connector.
The VMD202-R may then be removed or left in place as desired.

VMD202-50

EMX Vehicle Motion Detector Probe with 50ft Lead Wire

The VMD202 Vehicle Motion Detector is the most advanced single-piece vehicle motion sensor on the market today.
The probe and its electronics are housed in a slim design that is buried next to a driveway.
The VMD202-R Sensitivity Remote Control (sold separately) makes installation and fine tuning simple
Probe assembly and wire are water tight and direct burial compatible
Harness is pre-wired onto lead wire for easy installation
Settings are placed in a non-volatile memory in case of power failure

.......more details

PROBE-150

EMX CARSENSE-101 Direct Burial Probe with 150' Lead Wire

Wand only
Requires CS101 (Carsense-101)

LD-11

EMX Base Socket 11-Pin DIN Rail Mountable Black (Was formally Grey)

For use with D-TEK detectors (most commonly used)
Hourglass shaped

LD-11B

EMX Base Socket 11-Pin DIN Rail Mountable Black Block Style

For use with D-TEK detectors
Special Order Only
Narrow profile

PROBE-50

EMX CARSENSE-101 Direct Burial Probe with 50' Lead Wire

Wand only
Requires CS101 (Carsense-101)

CS202S-5-100

EMX Car Sense Vehicle Motion Detector ** Discontinued Offer VMD202 instead

Low voltage used for automatically opening gate when exiting property without requiring the use of a remote control transmitter key pad or any other operator control device.
Can be located up to 150' from the gate. Senses automobiles on a driveway up to 12' wide moving more than 5 m.p.h.
A second probe can be connected in parallel for additional coverage or for automatic opening in or out.
Available in a five wire (recommended for use with GTO operators) and a three wire version.
The CarSense 202 is buried in the ground so it will not be noticed by a potential intruder or vandals.
The CarSense 202 accepts a wide range of power input of 9 - 41 VDC and 6-29 VAC. The low current consumption of 250uA and 12mA detected make the CarSense 202 Slim a great choice for solar applications

.......more details

Installation Manual Sell Sheet

VMD202-100

EMX Vehicle Motion Detector Probe with 100ft Lead Wire

The VMD202 Vehicle Motion Detector is the most advanced single-piece vehicle motion sensor on the market today.
The probe and its electronics are housed in a slim design that is buried next to a driveway.
The VMD202-R Sensitivity Remote Control (sold separately) makes installation and fine tuning simple
Probe assembly and wire are water tight and direct burial compatible
Harness is pre-wired onto lead wire for easy installation
Settings are placed in a non-volatile memory in case of power failure

.......more details

Installation Manual Sell Sheet


User Name:
Password:
Remember Me:

	Forgot your password
Request a Login