Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login

LRS-FP-100

EMX Sensor Flat Pack 100ft Wire

  • Lead probe ONLY. Requires the LRS-C1 detector
  • Three-dimensional presence detection of vehicles
  • Select X Y Z axis independently
  • Stand-alone sensor
  • Sensor stores ambient background and settings in non-volatile memory
  • Includes sensor and 100 ft of lead wire
  • .......more details
VMD202-R

EMX Remote Tuning and Adjustment Control Device

  • If you wish to “tune” the sensitivity the accessory VMD202-R will need to be plugged temporarily into the connector.
  • The VMD202-R may then be removed or left in place as desired.
VMD202-50

EMX Vehicle Motion Detector Probe with 50ft Lead Wire

  • The VMD202 Vehicle Motion Detector is the most advanced single-piece vehicle motion sensor on the market today.
  • The probe and its electronics are housed in a slim design that is buried next to a driveway.
  • The VMD202-R Sensitivity Remote Control (sold separately) makes installation and fine tuning simple
  • Probe assembly and wire are water tight and direct burial compatible
  • Harness is pre-wired onto lead wire for easy installation
  • Settings are placed in a non-volatile memory in case of power failure
  • .......more details
USVD-4X

EMX Ultra Sonic Vehicle Detector

  • The USVD-4X Drive Thru Vehicle Sensor uses patent pending Triangular Planar Array (TPA) technology to detect the presence of a vehicle.
  • The USVD handles any drive thru operation such as fast food banking pharmacies car washes and parking garages.
  • The USVD is simply mounted on a post or order box and aimed at the location where a vehicle would pass to initiate a transaction. No set-up or adjustments required.
  • Aux. relay settings for pulse on ENTRY EXIT or BOTH
  • Output delay option for 1 2 and 4 seconds
  • Operating range: 1ft. – 5ft.
  • .......more details
PROBE-100

EMX CARSENSE-101 Direct Burial Probe with 100' Lead Wire

  • Wand only
  • Requires CS101 (Carsense-101)
3BXT

Control Station Exterior Surface Mount O/C/S N4 Non-Metallic

  • Double pole contacts
  • H=5-3/4" W=2-3/4" D=2-1/2"
  • UL Listed CSA Approved
IS-2

Interlock Switch for Sectional Doors

  • Mounts on the door track to prevent the use of the operator when door is locked
  • Can be wired to a three button station
  • Demensions: 3" h x 3" w x 1-1/2" d
165-A

Fusible Link For Loads 1 to 30 lbs

  • Length is 2.625" width is .875"
  • Distance between centers is 1.75"
  • Priced per each
  • Fire rated at 165 degrees Fahrenheit
MK-00697

Micanan Fraba FOS-1 Exterior Thru-Beam Photocell Nema 4 / 4X 45ft Range

  • Exterior Through-Beam Photocell
  • Sensing Distance 45 Feet
  • UL325/2010 Recognized Component
  • Comes with Sender Receiver and Brackets
  • NEMA 4 & 4X
MAREDLED12

LiftMaster Red LED Light Strip 12 ft Long

  • Red LED light strip for MALED12
MV-00003

Micanan 3-btn O/C/S Nema-1 Pushbutton Control Station

  • Surface mount
S50E-PAIR

LiftMaster Small Profile end kit for one edge only 8.2KOhm resistance

  • Fast easy to install and cost effective system no glue is required
  • One end for output wire other end with resistor for monitoring
  • Compatible with S50 Small Profile Edge
  • Includes: (1) set enough for one edge
  • p/n 1804-1463
50-CP4

LiftMaster Sensing Probe Free Exit 100ft Lead

  • Self-contained free exit system designed to detect moving vehicle and open your automatic gate.
  • Can be installed above or below ground
  • Connects directly to any gate operator without an external output board.
  • Works with powered or solar gates.
  • SPECIFICATIONS: Cable Lead Length: 100 ft.
  • Power Requirements: 8-24 VAC oe 8-30 CSX
  • .......more details
CPS3CARD

LiftMaster Option Card Only (41K0811)

  • Works with all commercial Logic versions L2 L3 L4 L5
  • Use with CPS-U to add a second set of eyes to the operator
  • Allows activation of Timer-To-Close without CPS-U
  • Simply plugs into Logic board
  • Cut resistors on JU1 & R16 to activate timer feature
  • Same as 041K0811
  • .......more details
LC-36M

LiftMaster Light Curtain Monitored

  • The Monitored Light Curtain is a primary safety entrapment protection device that is compliant with UL 325.
  • IP67 Water-resistant housing anodized aluminum corrosion resistant
  • Operating Temperature: -40° F to +140° F (-40° C to +60° C)
  • Liftmaster Compatibility: LOGIC 5.0 Medium-Duty DDO8900W / LJ8900W / LJ8950W / ATSWVFOH HPH1 / HPH2 HCTDCUL Fire Door Egress
BEA-35-1555

BEA 50' of Cable Only for LZR Widescan

  • Optional 50 ft cable for use with the LZR-WIDESCAN
BEA-10-1311

BEA Adaptor Plate Kit for Widescan

BEA-10FALCN-EX100

BEA Falcon Motion Detector w/Exp Proof Housing 100ft Cable

  • FALCON EX combines a microwave activation sensor with an explosion-proof / flame-proof housing
  • Ideal for use in unique environments such as chemical manufacturing petroleum refining and agriculture.
  • FALCON EX can be mounted from 11.5' to 23' to fit any industrial application.
  • Nema4/IP66
  • Detection Zone: Falcon EX: 13’×16’ at 16’
  • Oerating termperature: -22-140F
  • .......more details
BEA-10FALCON-EX30

BEA Falcon Motion Detector w/Exp Proof Housing 30ft Cable

  • FALCON EX combines a microwave activation sensor with an explosion-proof/flame-proof housing
  • Ideal for use in unique environments such as chemical manufacturing petroleum refining and agriculture.
  • FALCON EX can be mounted from 11.5' to 23' to fit any industrial application.
  • Nema4/IP66
  • Detection Zone: Falcon EX: 13’×16’ at 16’
  • Operating temperature: -22 to 140F
  • .......more details
BEA-10-FALCON-W

BEA Falcon Wide Motion Detector

  • Allows uni or bi-directional sensing and the unique ability to open a door when traffic is moving away from the sensor.
  • Sensor also has the ability to differentiate between pedstrians and vehicles.
  • Mounting height between 11.5' and 21'
  • All settings are available directly on the unit or via the remote control.
  • Remote is sold separately
  • Detection zone: 30' x 11' at 21'
  • .......more details