Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login

PRO-4X_MOD-1PH

Micanan Nema 4X Modification 1/2HP- 1.5HP 1-Phase

  • This modification provides a washdown motor N-4X corrosion proof stainless steel control box enclosure waterproof drive and limit chain and a corrosion proof three-button station.
  • For options M & U Micanan N-4X photocells are supplied
  • 1/2HP to 1.5HP Motors
PRO-4X_MOD_3HP

Micanan Nema 4X Modification 3HP

  • This modification provides a washdown motor N-4X corrosion proof stainless steel control box enclosure waterproof drive and limit chain and a corrosion proof three-button station.
  • For options M & U Micanan N-4X photocells are supplied
  • For 3HP motors
PRO-4X_MOD_5HP

Micanan Nema 4X Modification 5HP

  • This modification provides a washdown motor N-4X corrosion proof stainless steel control box enclosure waterproof drive and limit chain and a corrosion proof three-button station.
  • For options M & U Micanan N-4X photocells are supplied
  • For 5HP motors
PRO-X_MOD-1/575V

Micanan Explosion-Proof Modification N-7/N-9 for 1HP 575V

  • Modification includes an explosion-proof motor explosion proof fittings operator mounted explosion-proof electrical control enclosure and n explosion-proof three button station.
SAFEPACK-MOD

Doorlec Safepack 24V Control Circuit

  • A safepack module is used as an "Intrinsically Safe Barrier Relay" and in hazardous locations with non-voltage producing sensors allowing the user to use a N.O. non-monitored sensing edge.
MP-00081

Micanan Double V-Belt Mod. for PRO-J H HHD

  • Provides added strength to the belt drive system
MU-00005

Micanan Hand Crank Handle 6' Long

  • For hand crank operation in lieu of hand chain and pocket wheel
MP00069

Micanan Jackshaft w/Aux Trolley Assembly Mod. 7ft High Door #41 Trolley Drive Chain

  • Provides an auxiliary trolley assembly where otherwise a jackshaft operator may be preferred
  • NOTE: Operator must be supplied with reverse limits
  • If purchasing for field install the limits on the operator would need to be reversed
MP-00037

Micanan Hand Crank for Gearhead Jackshafts PRO-GH PRO-GHC

  • Provides for hand crank operation in lieu of hand chain and pocket wheel
MZ-00005

Micanan Synthetic Oil in Reducer Cold Temp. Mod.

  • For models PRO-GH GHC GT and GSD
MP-00010-U

Micanan Auxiliary Limit Switch for Monitored ECB

  • Installed to control auxiliary device
MP-00039

Micanan High Cycle Mod. for PRO-TTB

  • Modification only
  • For installations that exceed 100 door cycles per day
  • Includes cast iron flanged precision bearings on all shaft and delay on reverse circuit
  • Supplied with #41 chain
MP-00072

Micanan Jackshaft with Auxiliary Trolley Assembly 14' High Door #41 Drive Chain

  • Provides an auxiliary trolley assembly where otherwise a jackshaft operator may be preferred
  • Operator must be supplied with reversed limits
  • For models: PRO-J H HHD GH GHC
MK-00806

Micanan Heater Probe in Control / Limit Box 24V 20W 2" long Field Install

MP00070

Micanan Jackshaft w/Aux Trolley Assembly Mod. 8ft High Door #41 Trolley Drive Chain

  • Provides an auxiliary trolley assembly where otherwise a jackshaft operator may be preferred
  • NOTE: Operator must be supplied with reverse limits
  • If purchasing for field install the limits on the operator would need to be reversed
PRO-PL-10053-E

Micanan Wall Mount Control Panel 1HP 575V Non-Monitored ECB

  • Standard features include: N-4/12 12" x 10" x 6" panel B-2 C-2 D1 E2 T TS Mid-stop control functions Time delay on reverse On-board radio receiver hinged cover backplate primary fuses in panel
  • If PBS on cover required an additional charge will apply
  • If panel not ordered with an operator an additional charge will apply
MP-00024

Micanan Auxiliary Chain Disconnect for Pro-T TB

  • Allows for operation of a door by an auxiliary chain hoist.
  • Hoist mechanism is coupled to front end of drawbar
  • MUST specify door width and position of hoist (left or right)
PRO-X_MOD-5HP

Micanan Explosion-Proof Modification N-7/N-9 for 5HP

  • Modification includes an explosion-proof motor explosion proof fittings operator mounted explosion-proof electrical control enclosure and n explosion-proof three button station.
PRO-X_MOD-3HP

Micanan Explosion-Proof Modification N-7/N-9 for 3HP

  • Modification includes an explosion-proof motor explosion proof fittings operator mounted explosion-proof electrical control enclosure and n explosion-proof three button station.
MW-00232

Micanan In-Line Torque Clutch Assembly Modification

  • Clutch is mounted in between motor and reducer flange
  • Overall length of operator increases by 3.85"
  • For models PRO-GH / GHC 1/2hp 3/4hp 1 hp 1.5hp & 2 hp