Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Garage Door Opener Parts Genie / Overhead
37220R

Genie Replacement Safety Beam Set

  • Works on all Genie model openers including Legacy with 2-pin connector safety beams
  • Not compatible with openers made before 1995
  • Brackets and wiring included
  • Will work with all Genie and Overhead Residential openers that were manufactured with photo-eyes
36764A

Genie Chain and Belt Pulley (#39591A)

  • Works on Genie IntelliG 1000 & 1200 Garage Door Openers
  • Both for Chain and Belt Openers
  • Front Idler Pulley for Genie 4024
  • New part number #39591A
27220A

Genie Limit Switch Chain Drive

  • Compatible with the following operators: PMX700 GPS700-IC PMX1200 GPS1200-IC PMLD500 PMX500-IC/B PMX300-IC/B IC250/B PMX60-65-70-75-80-85-300IC-500IC-IC250 among others
  • For chain drive models with internal limits
33356A

Genie Opto-Luctor Wheel

36179R

Genie Traveler Assembly for Screw Drive

  • Fits model 3060 L/M
  • Replaces: 25589R 25589S 25589C 20414R 34107R 20073R & 24357R
26966D

Genie Chain Pulley

  • Front idler pulley for full chain models ie..PMX500
  • Fits a T-rail
  • Diameter: 2-3/8"
  • 7/16” bore
  • For use with t-style rails
25605R

Genie Inner Slide Kit for Chain Drive Models

  • The innerslide attaches to the chain and connects the carriage to the chain
  • Works on the following Genie and Overhead Door models:
  • IC250 PMX80 PMX500-IC/B IC250/B PMX85 ALC Series PMX60 PMX300-IC/A RCD Series PMX65 PMX500IC/A PMX75 PMX-IC/B
  • SP99 – SP SERIES LD100-500-100A-550A LAD125-555
  • CM6000-6000A-60-70-80-60S
  • OHD-696 696CD + Others
    • .......more details
34538S.S

Genie Magnetic Close Down Limit Switch Assembly 138"

  • For Chain Glide models
41181R.S

Genie Main Control Board Kit 6070H 6170HB

  • Primary electrical and logic interface for Genie's 6070 and 6170 Garage Door Openers
  • DOES NOT include the Genie Aladdin Connect Control Board #41153R
41176R

Genie Shaft Assembly Kit 6070/6170

27091A

Genie Limit Worm Gear for PMX500

  • Limit worm gear sits in the Limit switch plate and works with the Limit Worm Drive to activate the limit wheel
  • Works With Genie Models PMX 500-IC/B IC250/B
37557R

Genie Chain Drive Bullet Assembly

  • This Genie chain drive bullet assembly is the white piece that holds the chain for the garage door opener together.
  • Works with chain model Genie garage door openers that have a C-Channel rail.
  • The chain carriage assembly for these models also attaches to this chain bullet assembly allowing it to move the garage door open and closed up and down the rail.
  • Assembly contains: The 2 Bullet side white pieces and the four screws to install it
  • Compatible with Genie models that have a chain rail: 1028 2028 3020H 3020H-B 3024 4024 3022 3042 3120H 3120H-B 4022 4042 4124 4164 (ChainMax ReliaG IntellG and TriloG series with these model numbers)
36045A

Genie Helical Gear 2040L

  • Helical gear assembly for the Genie #2040L garage door opener.
  • Same as: 36045AS 36045. 36045A 36045S
  • Includes: Helical and limit gear screws clips and small tube of grease.
39360R.S

Genie Optical Encoder Assembly for Belt/Chain Drive

  • Compatible with many of the newer Genie chain and belt drive openers.
  • New DC Optical Encoder Assembly for Chain and Belt Drive Garage Door Openers.
  • Also Compatible with Overhead Door Odyssey Series #7030 and Destiny Series #8030 Chain and Belt Drive Garage Door Openers.
27222A

Genie Sprocket Bushing *** To extent of Inventory

  • For Genie Chain Drive or Belt Drive Channel Rails.
  • Fits the following models: PMX700 PMX1200 GPS00-IC GPS1200-IC
  • Available to extent of inventory
39153R.S

Genie Optical Encoder AC Screw Drive Models

  • Compatible with models; 2562 2564 2568 PowerLift® GPower 900
  • Also called the RPM sensor it is used to resolve the issue of short travel problems or drifting limits on the garage door opener.
  • Single & Dual encoder
20449R

Genie Chain Glide Rear Housing Cover

  • Compatible with models: PCG400 PCG450 PCG500ML PCG600 PCG700ML PCG700FN GCG350L GCG350ML H2000C 1020L 2020L
  • Contains gear housing cover only
38877R.S

Genie Non-Configured Circuit Board

  • Replaces the following models: 38001R1.S 38001R2.S 38001R3.S 38001R4.S 38513R.S 38514R.S 37470R1.S 37470R2.S 37470R3.S 37470R4.S 38334R1.S 38334R2.S 38334R3.S 38334R4.S
  • Compatible with Series II Controls and comes with only the circuit board
  • In order for this kit to function properly it is important that customers know the model of their opener.
  • If unsure as to what resistor needs to be remove refer to the instructions that came with the unit
38123A

Genie Powerhead Mounting Flange

  • Mounting bracket connects the powerhead to the rail assembly.
  • A tongue on the flange fits into the bearing block assembly on the rail to keep it in place.
  • Fits TriloG PowerLift GPower and PowerMax Operators
36645R

Genie Screw Drive Coupler

  • This coupler only works on the following models manufactured after June 2011.
  • TriloG 1200 (3064) TriloG 1500 (4064)
  • PowerMax 1200 (3062) PowerMax 1500 (4062)
  • GPower 900 (2564)
  • Powerlift 900 (2562)