Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Open Garage Door Opener Parts Genie / Overhead
37220R

Genie Replacement Safety Beam Set

  • Works on all Genie model Openers including Legacy with 2-pin connector safety beams
  • Not compatible with Openers made before 1995
  • Brackets and wiring included
  • Will work with all Genie and Overhead Residential Openers that were manufactured with photo-eyes
38877R.S

Genie Non-Configured Circuit Board

  • Replaces the following models: 38001R1.S 38001R2.S 38001R3.S 38001R4.S 38513R.S 38514R.S 37470R1.S 37470R2.S 37470R3.S 37470R4.S 38334R1.S 38334R2.S 38334R3.S 38334R4.S
  • Compatible with Series II Controls and comes with only the circuit board
  • In order for this kit to function properly it is important that customers know the model of their opener.
  • If unsure as to what resistor needs to be remove refer to the instructions that came with the unit
33950R

Genie Up Limit Switch Assembly 66 " Wire

  • For use on 7'6" rail assemblies.
  • For Genie Excelerator models and Overhead Overdrive models
  • Open / Up magnetic limit switch
36764A

Genie Chain and Belt Pulley (#39591A)

  • Works on Genie IntelliG 1000 & 1200 Garage Door Openers
  • Both for Chain and Belt Openers
  • Front Idler Pulley for Genie 4024
  • New part number #39591A
37557R

Genie Chain Drive Bullet Assembly

  • This Genie chain drive bullet assembly is the white piece that holds the chain for the garage door opener together.
  • Works with chain model Genie garage door openers that have a C-Channel rail.
  • The chain carriage assembly for these models also attaches to this chain bullet assembly allowing it to move the garage door open and closed up and down the rail.
  • Assembly contains: The 2 Bullet side white pieces and the four screws to install it
  • Compatible with Genie models that have a chain rail: 1028 2028 3020H 3020H-B 3024 4024 3022 3042 3120H 3120H-B 4022 4042 4124 4164 (ChainMax ReliaG IntellG and TriloG series with these model numbers)
20113R

Genie Limit Switch Screw Drive

  • For use on Genie screw-drive openers.
  • Compatible with ALL Genie Screw and Trac Drive garage door openers with standard rail assemblies
  • Replaces either the UP or the DOWN limit switch
  • Replaces Genie Genius Trac Drive limit switch models 19795S and 22785R
  • Not compatible with excelerator models
41181R.S

Genie Main Control Board Kit 6070H 6170HB

  • Primary electrical and logic interface for Genie's 6070 and 6170 Garage Door Openers
  • DOES NOT include the Genie Aladdin Connect Control Board #41153R
36254R

Genie T-Rail Carriage Assembly

  • This part is listed under several part numbers: 36254R.S 36197A 21784R 20438R
  • For all chain drive openers with steel T-rail assemblies
  • Must be installed with inner slide part # 25605R
38874R3.S

Genie Electronic Circuit Board Assembly

  • Replaces board 38001R3.S and 37470R3.S
  • Compatible with Genie Series 3 model 3024 garage door opener systems and Overhead Door Series 3 Model 7030
28773A

Genie Idler Pulley for Belt Drive

  • Fits PMX500-I B/C Belt & Chain drive model
  • Front Pulley for belt channel applications only.
  • Compatible with the Ovehead Door Legacy BELT DRIVE (model #696 and #496) and Phantom (model #777) garage door opener
  • Part Numbers: 28773 28773AS 28773S 38773A
38416A

Genie Belt Drive Sprocket

  • Works for the following Belt Drive models: Relia-G 600 (model 1024) Relia-G 800 (model 2024) QuietLift 600 (model 1042) QuietLift 800 (model 2042) Overhead Door (model 1026) Overhead Door Legacy 800 (model 2026)
  • 14 tooth belt sprocket for Genie and Overhead Door belt drive garage door openers
  • Solid metal upgraded replacement sprocket
30257T

Genie Coupler Screw Drive Units

  • Used for attaching the screw of Genie screw drive rail to the motor head.
  • This coupler is made to break away if the door hits a hard obstruction thereby protecting the motor.
  • If the motor of the screw drive Genie runs but the screw is not turning this coupler needs replaced.
  • To check and replace that part remove the two screws holding the rail to the main power head
  • Mounts on rear of opener rail and fits in motor head.
34538R

Genie Up Limit Switch Assembly 66" Wire

  • For up direction on a ChainGlide System using magnetic limits
  • For models: 350ML 500ML 700ML 800ML and other ML Series ChainGlide door openers
  • Also for Overhead Door Python ChainGlide garage door openers
  • 66" inches of wire attatched
28018A-KIT

Genie Inner Slide Bullet and Retainer Kit Belt Drive

  • Kit includes part # 28018A and # 28019A
  • Fits Many Genie and Overhead Door Belt Drive Openers with C Rail
  • Includes 1 Belt Bullet and 2 Retainers
36051R

Genie Replacement Carrage Assembly

  • For Genie belt drive garage door opener model 2040L
36045A

Genie Helical Gear 2040L

  • Helical gear assembly for the Genie #2040L garage door opener.
  • Same as: 36045AS 36045. 36045A 36045S
  • Includes: Helical and limit gear screws clips and small tube of grease.
24701R

Genie Chain Drive Dog Limits 3-PKG

  • Replacement limits for older model Genie Chain Drive openers with steel T-Rail assembly
  • Replaces the clip-on limit switch
  • Limit dogs external rail-mounted limit switches
20386R

Genie Sequencer Board AC Screw Drive

  • For Genie Screw Drive garage door opener models: PRO95 CM8600 CM7600 Series II ISL950A IS550
  • Replaces part number 31184R
19863R

Genie Clip and Collar Rail Connectors

  • For Genie screw drive units having split rails use a collar and spring clip to join the 3-piece screw.
  • Complete collar and clip set for one 3-piece rail.
  • Compatible with all screw drive Genie garage door openers
  • Set of 2 clips and 2 collars
  • Same as 19806A04 and 19807A04
27191A

Genie Opener Sprocket 10 Tooth

  • 10 Tooth Sprocket.
  • For Chain Drive Models: IC250 IC250B PMX60 PMX65 PMX75 PMX80 PMX85 PMX300-IC/A PMX500IC/A PMX300IC/B PMX700 PMX1200 GPS700 GPS1200-IC.