Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search 3 Garage Door
HAE00018

Linear Inner Slide Assembly - Chain (HCT)

  • For LSO50 LDO33 & LDO50
DD-KIT

Linear Double Delta Radio Kit (2X DT & 1X DR)

  • Kit includes two DT remotes and one DR receiver
  • Same as: DNP00006
  • Operates on 24 VAC power
  • Codes: 1024 (set by dip switches)
  • RF frequency: 310 MHz
Installation Manual
MDR/U

Linear 1-Channel MegaCode Universal Plug-In Receiver 318 MHz

  • Makes any garage door operator compatible with MegaCode transmitters
  • Simple plug-in design
  • Easy to install - one connection using two-conductor wire
  • Memory: storage for up to 10 MegaCode transmitters
  • Normally open contact activates for 0.5 seconds
  • Power: 110 VAC +/- 10% 60 Hz
    • .......more details
MTS3

Linear Megacode 3-Ch Visor Transmitter 318MHz (DNT00093)

  • Operates up to 3 garage doors
  • Easy to add/remove programming
  • LED light confirms battery power
  • Requires one (1) CR2032 coin-cell battery (battery included)
  • Includes Visor Clip
  • Ergonomically designed
    • .......more details
Programming instructionsInstructions de programmation
7FT-BELT-LINEAR

Linear 7ft Belt Drive Rail for residential openers (HBT7C)

  • 7ft belt-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
  • Fully-assembled & pre-tensioned
  • Compatible with Model CHCR-7/8 carriage house I-rail conversion kit
DTKP

Linear Delta-3 Wireless Keyless Entry 310 MHz

  • Activates multiple Delta-3 receivers
  • 1-8 digit PIN
  • Backlit keys for easy viewing
  • Mounting hardware supplied
  • Power: 9-volt battery
  • Codes: 256
    • .......more details
Programming instructions
LDC801

Linear 800 Newton DC Powered Garage Door Opener Accept Both Belt or Chain Rail (LDCO801)

  • The energy-efficient DC-powered operator that runs at an AC-equivalent speed.
  • DC drive motor with soft-start and soft-stop for smooth quiet long-term reliable performance.
  • Optional Battery Backup available for added peace of mind. Sold separately
  • Low-power standby mode dramatically reduces energy consumption
  • Supplies 800 Newtons of lifting force for heavy doors
  • Compatible with belt-drive or chain-drive T or I beam rails up to 10'
    • .......more details
Remote compatibility chart
8FT-CHAIN-LINEAR

Linear 8ft Chain Rail for residential openers (HCT8C)

  • 8ft chain-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
  • Fully-assembled & pre-tensioned
  • Compatible with Model CHCR-7/8 & CHCR-8 carriage house I-rail conversion kits
7FT-CHAIN-LINEAR

Linear 7ft Chain Rail for residential openers (HCT7C)

  • 7ft chain-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
  • Fully-assembled & pre-tensioned
  • Compatible with Model CHCR-7/8 carriage house I-rail conversion kit
309013

Linear 1-Channel Multi-Code Receiver 310 MHz

  • Three tabs for universal mounting
  • One N/O relay
  • Compatible with 310 MHz Stanley and Multi-Code transmitters only.
  • Operates on 24 VAC power
  • One channel
  • Codes: 1024 (set by dip switches)
    • .......more details
Programming Instructions
8FT-BELT-LINEAR

Linear 8ft Belt Drive Rail for residential openers (HBT8C)

  • 8ft belt-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
  • Fully-assembled & pre-tensioned
  • Compatible with Model CHCR-7/8 & CHCR-8 carriage house I-rail conversion kits
HAE00040

Linear Control Logic/Receiver Board

  • Replaces HAE00039
  • Control board for LSO LDO LCO models
EXA-2000

Linear Directional Antenna (AAE00331)

  • Compatible with all Linear receivers with Type F antenna connector
  • Receives signals in 288 to 320 MHz range
  • Directional remote antenna designed to enhance the radio range of Linear receivers
  • Includes 10 feet of coax
  • Clamp for mounting
  • Dimensions: 21” W x 5” H x 1.5” D
    • .......more details
EXA-1000

Linear Omni-Directional Remote Antenna (AAE00198)

  • The EXA-1000 is a 1/2 wave center fed vertical antenna composed of three parts: an Antenna assembly with an F connector attachment; a Base Plate assembly with radial mounting provisions; and a five-foot 75-ohm coaxial cable.
  • The cable connects to the antenna base on one end and the receivers F connector on the other.
  • If the antenna must be mounted further than five feet from the receiver an extension cable of up to a maximum of 25 feet may be used instead of the five foot cable supplied.
  • Because of the cable resistance the performance of the EXA-1000 may be degraded by using longer than a 25 foot cable
  • Compatible with all Linear receivers with Type F antenna connector
  • Receives signals in 288 to 320 MHz range
    • .......more details
Installation manual
HAE00013

Linear Turnbuckle Assembly - Chain (HCT)

219110

Capacitor 1/2 HP 53-64 MFD 250V

  • For LDO50 only
109950

Linear 1-Channel Multi-Code Gate Receiver 12-24V

  • Operates on 12-24 volts AC or DC power
  • One channel
  • Whip antenna
  • 3-foot antenna coax and bulkhead connector
  • Codes: 1024 (set by dip switches)
  • RF frequency: 300 MHz or 310 MHz (jumper selectable)
    • .......more details
Programming Instructions
LDCO863B

Linear DC Powered Garage Door Opener Accepts Both Belt or Chain Rail

  • Ultra-Smooth and Quiet Industry leading performance with variable speed operation soft start/stop and ultra quiet motor
  • Integrated Battery Backup Energy-Efficient LED Lighting Long life dimmable LED light panels included. Secure.
  • Responsive Remote Control Linear MegaCode remote controls operate over long range and employ high-security technology
  • Release the operator’s quick-disconnect trolley to open or close the garage door manually
  • Self-Diagnostic System: Confirms proper operation and alerts users both audibly and flashing the lights. In the event of a problem it pinpoints the trouble and alerts users by flashing the courtesy lights
  • Linear ® Smart App Advanced real-time monitoring and control of garage doors from any mobile device. * Assign custom access and permissions for up to 10 authorized users and schedule door and light operation.*Wi-Fi and internet connection required
    • .......more details
Remote compatibility chart
LDCO800

Linear 800 Newton DC Powered Garage Door Opener Accept Both Belt or Chain Rail *Replaced by LDCO863B*

  • The energy-efficient DC-powered operator that runs at an AC-equivalent speed.
  • DC drive motor with soft-start and soft-stop for smooth quiet long-term reliable performance.
  • Optional Battery Backup available for added peace of mind. Sold separately
  • Low-power standby mode dramatically reduces energy consumption
  • Supplies 800 Newtons of lifting force for heavy doors
  • Compatible with belt-drive or chain-drive T or I beam rails up to 10'
    • .......more details
Installation manualSell sheetRemote compatibility chart
10FT-BELT-LINEAR

Linear 10ft Belt Drive Rail for residential openers (HBT10C)

  • For use with Nice/Linear LDCO863B LDCO841 LDCO801 LCO75 LSO50 LDO50 and LDO33 garage door operators.
  • Fully-assembled and pre-tensioned 10-foot belt-drive T-rail
  • This “T-rail” can be converted to stronger “I-rail” with Nice/Linear’s bolt-on Carriage House Conversion Kit CHCR-10.