Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Cable
MGT

Linear MegaCode Gate Safety Edge Transmitter 318 MHz (DNT00068)

  • The MGT is the industry’s only fully supervised gate safety edge transmitter.
  • It automatically sends an hourly status report to the access controller indicating battery condition and if the transmitter is operational.
  • Should the edge sensor be disconnected shorted or tampered with the MGT will report a trouble condition.
  • Features Include:
  • Signals access controller for stop or reverse when safety edge activates
  • No Cables or coiled wires
  • Mounting hardware (4 screws) supplied
  • Visor clip included
  • Power: Two CR2450 batteries
  • RF Frequency: 318 MHz
  • Codes: 1000000+ (MegaCode format)
  • Dimensions: 4.28" W x 2.875" H x 2.25" D
  • Compatible with AM3Plus AE1000Plus AE2000Plus AE-500 RE-1 RE-2 AP-5 APeX Controller equipped gate operators and MegaCode receivers
  • Same as: DNT00068
Programming Instructions
EXA-1000

Linear Omni-Directional Remote Antenna (AAE00198)

  • The EXA-1000 is a 1/2 wave center fed vertical antenna composed of three parts: an Antenna assembly with an F connector attachment; a Base Plate assembly with radial mounting provisions; and a five-foot 75-ohm coaxial cable.
  • The cable connects to the antenna base on one end and the receivers F connector on the other.
  • If the antenna must be mounted further than five feet from the receiver an extension cable of up to a maximum of 25 feet may be used instead of the five foot cable supplied.
  • Because of the cable resistance the performance of the EXA-1000 may be degraded by using longer than a 25 foot cable
  • Compatible with all Linear receivers with Type F antenna connector
  • Receives signals in 288 to 320 MHz range
    • .......more details
Installation manual
HSLG-121

Linear Commercial Slide Gate Operator 1 HP 230V 1 Ph - Heater not Included

  • Max duty cycle: Continuous
  • Integral APeX Controller
  • Double V-belt to chain reduction
  • #40 roller chain
  • Emergency manual disconnect handle
  • Powder coat finish
    • .......more details
GRD-2

Linear 2-Channel Delta3 Gate Receiver 310 MHz (DNR00102)

  • Auto voltage sensing - no jumpers to set
  • Two Form ”A” (normally open) relays rated at 30 Volts AC/DC up to 5 Amps
  • Supplied with whip antenna three feet of coaxial cable and bulkhead connector
  • Power: 12 - 30 VAC or 10.5 - 30 VDC
  • Codes: 128 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
SLR-221

Linear Residential Slide Gate Op. 1/2HP 230V 1 Ph - Cold Weather Package NOT Included

  • Integral entrapment sensing system with digital set point for quick accurate adjustment and enhanced safety
  • Continuous-tone entrapment alarm with reset button
  • LED diagnostic display for ease of setup and troubleshooting
  • Selectable pre-start and run alarm with provision for ADA compliant visual pre-start and run alarm
  • Regulated 24 Volt DC power available for access control accessories
  • Integrated maximum run and auto close timer (0-9 minutes)
    • .......more details
SLC-221

Linear Commercial Slide Gate Op. 1/2HP 230V 1 Ph - Cold Weather Package NOT Included

  • Integral entrapment sensing system with digital set point for quick accurate adjustment and enhanced safety
  • Continuous-tone entrapment alarm with reset button
  • LED diagnostic display for ease of setup and troubleshooting
  • Selectable pre-start and run alarm with provision for ADA compliant visual pre-start and run alarm
  • Regulated 24 Volt DC power available for access control accessories
  • Integrated maximum run and auto close timer (0-9 minutes)
    • .......more details
MGR

Linear 1-Channel MegaCode Gate Receiver 318 MHz

  • Single Form ”A” (normally open) relay rated at 30 Volts AC/DC up to 5 Amps
  • Supplied with whip antenna three feet of coaxial cable and bulkhead connector
  • Memory: storage for up to 40 MegaCode transmitters
  • Power: 12 - 30 VAC or 10.5 - 30 VDC
  • Codes: 1000000+ (MegaCode format)
  • RF frequency: 318 MHz
    • .......more details
Installation Manual
HSLG-411

Linear Commercial Slide Gate Operator 3/4 HP 115V 1 Ph - Heater not Included

  • Great for industrial and commercial applications
  • Features the APeX control board
  • Emergency manual disconnect handle
  • Powder coat finish
  • Post mount standard; pad mount optional
  • Integral entrapment sensing system with dual multi-turn precision potentiometers for accurate adjustment and enhanced safety
    • .......more details
HSLG-221

Linear Commercial Slide Gate Operator 1/2 HP 230V 1 Ph - Heater not Included

  • Max gate size: 35 ft 1000 lbs
  • Max duty cycle: Continuous
  • Integral APeX Controller
  • Double V-belt to chain reduction
  • #40 roller chain
  • Emergency manual disconnect handle
    • .......more details
HSLG-123

Linear Commercial Slide Gate Operator 1 HP 230V 3 Ph - Heater not Included

  • Max duty cycle: Continuous
  • Integral APeX Controller
  • Double V-belt to chain reduction
  • #40 roller chain
  • Emergency manual disconnect handle
  • Powder coat finish
    • .......more details
HSLG-111

Linear Commercial Slide Gate Operator 1 HP 115V 1 Ph - Heater not Included

  • Integral entrapment sensing system with dual multi-turn precision potentiometers for accurate adjustment and enhanced safety
  • Continuous-tone entrapment alarm with reset button
  • Integrated warning beeper during gate movement
  • 15 diagnostic LEDs on board for ease of setup and troubleshooting
  • Selectable pre-start alarm with provision for ADA compliant visual pre-start and run alarm
  • On-board APeX Controller three-button control station
    • .......more details
DTG

Linear Delta3 Safety Edge Transmitter 310 MHz

  • Activates one Delta-3 receiver for remote stop or reverse safety edge
  • No cables or coiled wires
  • Mounting screws (4) supplied
  • Power: 9-volt battery
  • Codes: 256 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
AQ201-NB

Linear GTO Narrow Band Receiver w/Antenna and 10ft Cable

  • Works with all GTO DC gate operators and narrow band transmitters (gray style).
  • The AQ201-NB comes standard with all DC slide gate operators.
  • Measures: 2"H x 2-3/8"W x 15/16"D
ANT-2

Linear 3ft Mid-Range Antenna (SNE00002)

  • Antenna for Linear’s 27 MHz mid-range transmitters and receivers
  • Three-foot whip style
  • 18 feet of coax cable included
  • ”U” bolt included for post mounting
  • Dimensions: 2.25” W x 39” H x 2” D
  • Same as: SNE00002
    • .......more details
105104

Linear Gate Safety Edge Transmitter

  • 105104 is for adding obstacle sensing for motorized gates or barrier arms.
  • Using a safety edge transmitter is more economical and discrete than the traditional coiled cord connection method.
  • The transmitter mounts directly on the gate or barrier arm and wires to a standard exterior safety edge sensor.
  • Compatible with 310 MHz Stanley receivers and Model 109950 302850 and 309013 receivers.
  • Activates receiver for stop or reverse entrapment
  • No cables or coiled wires
    • .......more details
Installation Manual
MGR-2

Linear 2-Channel MegaCode Gate Receiver 318 MHz *** To Extent of Inventory

  • Two Form ”A” (normally open) relays rated at 30 Volts AC/DC up to 5 Amps
  • Supplied with whip antenna three feet of coaxial cable and bulkhead connector
  • Memory: storage for up to 40 MegaCode transmitters
  • Power: 12 - 30 VAC or 10.5 - 30 VDC
  • Codes: 1000000+ (MegaCode format)
  • RF frequency: 318 MHz
    • .......more details
Installation Manual
GRD

Linear 1-Channel Delta3 Gate Receiver 310 MHz (DNR00101) ***Discontinued

  • Auto voltage sensing - no jumpers to set
  • Single Form ”A” (normally open) relay rated at 30 Volts AC/DC up to 5 Amps
  • Supplied with whip antenna three feet of coaxial cable and bulkhead connector
  • Power: 12 - 30 VAC or 10.5 - 30 VDC
  • Codes: 256 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions