Devanco Canada - Get The Right Garage Door Opener‎ and Parts

71-EB3PH

LiftMaster Field Install Brake Kit 230/460V 3PH for L5 Operators Ext. Mount

For operators already in the field without a brake

Installation Manual

50680

Doorlec Clutch Assembly for LJH

SHAFT002

Manaras Hand Crank Shaft 5/8" Sold per Foot Max. Length 12ft

Must specify exact length required when ordering

MOD074

Manaras Hand Crank Modification

For manual operation with a hand crank instead of a chain hoist.
Hand crank hook and eye outlet is supplied.
A 5/8" rod or pipe (SHAFT002) is required but not supplied
SHAFT002 should be ordered separately and desired cut-to length specified at time of order.
This modification is also available for in the field upgrade - see MODKIT074
This modification applies to OGH and MGH operators

.......more details

PPK3M

LiftMaster Passport MAX 3-Button Keychain Remote

Provides total control with one remote for gated communities and commercial properties.
Compatible with the PPWR Receiver for gate access control all 315MHz Security+ LiftMaster and Elite Series Gate Openers and all LiftMaster Garage Door Openers manufactured since January 1995
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)

Programming Instructions Instructions de programmation Sell Sheet

1005-2-10'

Aluminum Bottom Retainer U-Shaped 10' Long**Actual Length 10'1"***

For door thickness 2"

10-30701M

LiftMaster Chain Guide Tray for SL595

The tray located between the 2 chain guides.
Chain guides are not included.

37845R

Genie Screw Drive Carriage Assembly

Compatible with the following models: GPower 900 TriloG 1200 TriloG 1500 PowerMax 1200 PowerMax 1500
Works with Screw Drive Shuttle assembly part # 36664R - sold seperately

27175B

Genie Carriage Slide Only

Carriage NOT included. Carriage part number 20462R
Compatible with Genie GPS and PMX belt drive models

AK-21

Linear Interior Digital Keypad***to extent of inventory

The keypad is housed in a rugged plastic enclosure and is designed to be mounted in a standard single-gang electrical box. The die-cast keys have bright easy-to-read yellow graphics.
It is supplied with four different plastic snap-on mounting bezels to customize the look of the keypad. The satin-chrome bezel comes factory installed on the keypad. The white ivory & bronze bezels are packaged separately.
Up to 480 entry codes from 1 to 6 digits in length can be programmed. They can activate either or both of the relay outputs.
Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp capacity. The relays can be set for timed or latch-on/latch-off toggle operation per each individual entry code.
The on or off toggle state of a relay is maintained even after power interruption. When power is restored to the keypad each relay will assume the state it was in when power was removed.

Installation Manual

MX00150

Micanan Complete Clutch Shaft Assembly for PRO-HHD

34538S.S

Genie Magnetic Close Down Limit Switch Assembly 138"

For Chain Glide models

747

Fasteners Slotted Track Bolt 1/4-20 x 1" 1000/Box ** Unavailable

Knurled shank
Max torque = 6

797

Fasteners Clevis Pin 5/16" x 1" 100/Bag

MH00007

Micanan Shaft Collar 1" I.D

VMD202-100

EMX Vehicle Motion Detector Probe with 100ft Lead Wire

The VMD202 Vehicle Motion Detector is the most advanced single-piece vehicle motion sensor on the market today.
The probe and its electronics are housed in a slim design that is buried next to a driveway.
The VMD202-R Sensitivity Remote Control (sold separately) makes installation and fine tuning simple
Probe assembly and wire are water tight and direct burial compatible
Harness is pre-wired onto lead wire for easy installation
Settings are placed in a non-volatile memory in case of power failure

.......more details

Installation Manual Sell Sheet

754

Fasteners Self Drill & Tap Tek Screw 5/16-12 x 1" (#4PT) 1000/Box ** NLA Offer 108207

Indented Hex Washer Head
7/16" Head
Max RPM = 2000

3X6SC50

Devanco Loop 3' x 6' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

G65-19084

LiftMaster Thermostat Control Heater Fin Type for 208V-460V Gate Operators ** Discontinued

Heater used in BG type gate operators

Installation Manual

.343-6-R

Cut-to-Length Torsion Spring .343 x 6" Right Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

7001-7-BLACK

Commercial Side & Top Weather-Strip 7' Long - Black 7001-BB (Code B)

Black galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

766

Fasteners Flat Head Carriage Bolt 1/4-20 x 2-1/2" 1000/Box

Full length thread
Max torque = 6

786

Fasteners Hex Nut 1/4-20 1000/Box

784

Fasteners Serrated Flange Nut 1/4-20 1000/Box

Serrated flange face to provide locking

776

Fasteners Hex Head Bolt 1/4-20 x 1" 1000/Box

1/4" bolt has 7/16" head
Max torque = 6
Full thread
Grade 5

K75-18620

LiftMaster Limit Box Kit for SL595 ** Discontinued

Kit contains: Limit shaft Limit switch box Lid for cover Panel Adjustment plate Mounting bracket Limit shaft bearing Compression spring Spacer Nut Terminal box Hall effect kit Tinnerman nut double and e-ring

MV00292

Micanan Banner Photocell with Reflector

AW14-RF-K10

Miller Edge Wireless Air Wave Switch Transmitter/Receiver Kit

AW14-RF is the AW14 air wave switch with a transmitter embedded within the switch enclosure and the receiver wires into the operator.
There is no need to hardwire coil cords or retracting reels which saves installation time and improves visual aesthetics.
The AW-14-RF-K10 switch kit includes a MRF-01 receiver which is wired to the motor controls.
Battery is included # CR2032

Installation Manual Sell Sheet

SSZP8-6

Solid Shaft 1" Keyed Zinc Plated 8'-6" (102")

29-2

Resistor 25W 2 Ohm

19-5812

LiftMaster Trolley Chain Pack #48 for 12ft Door

Chain pack only

772

Fasteners Lag Screw Hex Washer High Profile 5/16" x 2" 1000/Box *** Temp. NLA

7/16" Head
Hex washer high profile head

CH751L5-RH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 115/230 VAC Logic 5 Right Hand

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with either CPS-UN4 or CPS-RPEN4 photoeyes

Installation Manual Manuel d'Installation Sell sheet Brochure

H505L5-LH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 575 VAC 3 Ph Logic 5 Left Hand

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

H501L5-LH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 115/230 VAC Logic 5 Left Hand *** No Longer Available

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

178B35

LiftMaster Curved / Bent Arm Kit (41B0035B)

Will work with most residential garage door openers
Also known as: 4178B0035B 178B32 41B0035B 4178B35 178B35 012385990357 178B35B

7001-18-SANDSTN

Commercial Side & Top Weather-Strip 18' Long - Sandstone (D)

Sandstone galvanized steel with sandstone dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Also known as Taupe
Full case quantity only (10)

41AC175-2

LiftMaster Electronic Circuit Board Assembly

For Sears / Craftsman garage door opener

1104-8FT-GREY

Residential Side & Top PVC Weather-Strip with cap 8' Long - Grey (G)

Grey rigid vinyl retainer with grey flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

K74-34582-1

LiftMaster Plastic E-Box Assembly for LA500CONT

Plastic replacement box only

27-20113

Truck Door W-Style Spring Assembly Roadside 33" Long

Wire thickness: .182
Spring length: 33 inches long (assembled length)
Inside diameter: 1.188
Includes cable drum and bearing assembly winding cone wound onto spring for stronger desgn and internal spring spacer.

27-20112

Truck Door W-Style Spring Assembly Curbside 33" Long

Wire thickness: .182
Spring length: 33 inches long (assembled length)
Inside diameter: 1.188
Includes cable drum and bearing assembly winding cone wound onto spring for stronger desgn and internal spring spacer.

MK-00014

Micanan Reversing Relay 220VAC Coil DPDT (Flange Mount)

8-pin

358.000-PANEL

Whiting Bottom Panel White Aluminum Clad

Comes complete with #77W Lock
Actual replacement for Intercontinental-Winnipeg s/n 51617

GITR-3

Genie Intellicode 3-Button Remote 37517S 390 MHz *** To extent of Inventory

Replaces Series II GIT-1 GIT-2 & GIT-3
Battery Instructions Visor Clip Included
Note: Only the far right of the three buttons (1 dot button) will operate those older Genie Intellicode units built from 1995 through 1997.
If you have a Genie unit built in 1995 1996 or 1997 this is the only remote that Genie presently makes to operate the Genie garage door openers built during these years.
In this special case the remotes can only be used as 1 button remotes and no other multi-button Genie remote is compatible.

Programming Instructions Instructions de programmation

41A1037

LiftMaster Chassis Bracket

To correct higher level of noise than normal due to vibration from the powerhead.
Fits models 1355 3255 3270 3265-267 made between Jan-March 2014.

BK000

Residential Top Bracket Adjustable 1-Bolt Sold per Piece

Same as part number 3-31-1
Sold per piece - not a pair

305-153613

LiftMaster Idler Sprocket Assembly (K305-153613)

Fits SL595

SOLID_SHAFT_7FT

Solid Shaft 1" Keyed 7 ft Galvanized

Actual length is approx. 7'-1"

1005-1-3/4-10

Aluminum Bottom Retainer U-Shaped

For door thickness 1-3/4"

95LMC

LiftMaster Keyless Entry Transformer

2-wire hook up
110VAC Input 22 VDC 2-Wire Connection

1A3982

LiftMaster Operator Splash-Proof Cover

For models: MH H HCT GH
For wall mounted operators 31" L x 19" W x 18" D assembly required.

Installation manual

41C0279

LiftMaster Light Socket for Sec+ 2.0

New light socket designed to accept a broader range of compact fluorescent bulbs-CFL.
Compatible with LiftMaster garage door openers manufactured from 1993 to present.
New "insulated" design eliminates interference from CFL bulbs therefore better remote control range

ME00057-COMPLET

Micanan Clutch Shaft Complete for PRO-APT (SCLUTCHSHAFT) MX00213

For model PRO-APT

.207-258-L

Cut-to-Length Torsion Spring .207 x 2-5/8" Left Hand Wound Brown

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.283-2-R

Cut-to-Length Torsion Spring .283 x 2" Right Hand Wound White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.283-2-L

Cut-to-Length Torsion Spring .283 x 2" Left Hand Wound White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.225-134-R

Cut-to-Length Torsion Spring .225 x 1-3/4" Right Hand Wound Orange/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.218-134-L

Cut-to-Length Torsion Spring .218 x 1-3/4" Left Hand Wound Yellow/Orange

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.207-134-L

Cut-to-Length Torsion Spring .207 x 1-3/4" Left Hand Wound Brown

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

ME113-C3

Miller Edge PVC Mounting Channel "L" Shape Sold by the Foot

.437_5-1/4"-LH

Torsion Spring .437 x 5-1/4" x 12ft LH Red/Green

Wire size: .437
Inside diameter: 5-1/4"
Length: 12 ft

.421_3-3/4"-LH

Torsion Spring .421 x 3-3/4" x 12ft LH Gold

Wire size: .421
Inside diameter: 3-3/4"
Length: 12 ft

.375_3-3/4"-LH

Torsion Spring .375 x 3-3/4" x 12ft LH Yellow/Green

Wire size: .375
Inside diameter: 3-3/4"
Length: 12 ft

.319_3-3/4"-LH

Torsion Spring .319 x 3-3/4" x 12ft LH Blue/Green

Wire size: .319
Inside diameter: 3-3/4"
Length: 12 ft

.262_3-3/4"-LH

Torsion Spring .262 x 3-3/4" x 12ft LH Red/Yellow

Wire size: .262
Inside diameter: 3-3/4"
Length: 12 ft

.283_2-5/8"-LH

Torsion Spring .283 x 2-5/8" x 12ft LH White

Wire size: .283
Inside diameter: 2-5/8"
Length: 12 ft

.250_2-5/8"-LH

Torsion Spring .250 x 2-5/8" x 12ft LH Green

Wire size: .250
Inside diameter: 2-5/8"
Length: 12 ft

.192_2"-LH

Torsion Spring .192 x 2" x 12ft LH Silver

Wire size: .192
Inside diameter: 2"
Length: 12 ft

.273_1-3/4"-LH

Torsion Spring .273 x 1-3/4" x 12ft LH Orange/Red

Wire size: .273
Inside diameter: 1-3/4"
Length: 12 ft

29-31245

LiftMaster Relay 12VDC 250VAC 4-Pin SPDT C & D relay 3-phase only

C & D relay 3-phase only

24-24-1

LiftMaster Relay 24VAC 8-Pin DPDT Flange

19-50HL

Half (Offset) Link #50

Half link for #50 chain
ANSI Standard Carbon Steel

CP-SW-TD6A

Lynx Switch Light Delay

For the old Lynx 455 operators

24-115-1

Relay 8 terminal 115VAC DPDT

For most operators with contactor
Will work on Liftmaster MH Lynx MCJH and more

.363_6"-RH

Torsion Spring .363 x 6" x 12ft RH Green/White

Wire size: .363
Inside diameter: 6"
Length: 12 ft

.306_6"-RH

Torsion Spring .306 x 6" x 12ft RH Red

Wire size: .306
Inside diameter: 6"
Length: 12 ft

.421_3-3/4"-RH

Torsion Spring .421 x 3-3/4" x 12ft RH Gold

Wire size: .421
Inside diameter: 3-3/4"
Length: 12 ft

.283_2-5/8"-RH

Torsion Spring .283 x 2-5/8" x 12ft RH White

Wire size: .283
Inside diameter: 2-5/8"
Length: 12 ft

.273_2-5/8"-RH

Torsion Spring .273 x 2-5/8" x 12ft RH Orange/Red

Wire size: .273
Inside diameter: 2-5/8"
Length: 12 ft

.295_2"-RH

Torsion Spring .295 x 2" x 12ft RH Blue

Wire size: .295
Inside diameter: 2"
Length: 12 ft

.225_2"-RH

Torsion Spring .225 x 2" x 12ft RH Orange/Green

Wire size: .225
Inside diameter: 2"
Length: 12 ft

.243_1-3/4"-RH

Torsion Spring .243 x 1-3/4" x 12ft RH White/Yellow

Wire size: .243
Inside diameter: 1-3/4"
Length: 12 ft

.218_1-3/4"-RH

Torsion Spring .218 x 1-3/4" x 12ft RH Yellow/Orange

Wire size: .218
Inside diameter: 1-3/4"
Length: 12 ft

19-50ML

Master Link #50

For #50 chain
ANSI Standard Carbon Steel

PRO-LH-5011U-RH

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

Designed for use on commercial sectional doors with high or vertical lift
May also be used on small rolling grilles with max. 15 cycles per hour
Includes chain hoist
Includes solenoid brake
On board receiver with antenna
On-Board receiver holds up to 20 transmitters

.......more details

Installation manual Specification sheet

CP-CRG-NEW

Lynx Auto Re-Connect Carriage 14-1/2" Arm Sold Separately

Will work on most brands of commercial trolley operators using 2" angle tracks.

H14G03

Hinge #3 x 14 gauge

Bright zinc plated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 2-3/4" wide
#3 position
Use between sections 3 and 4
Same as part number 243

.......more details

LIMIT018

Manaras Double Limit Switch without Lever

Double limit switch (DPDT) - Cherry
The extra contact is used to control auxiliary equipment
Applies to all current operators

Limit Switch Chart

RADIO-31

Manaras MCR-32 Open/Stop/Close 24V receiver Nema 4/12 313 MHz *** Repl. by RADIO-RE901B

3-Channel O/C/S receiver controls one operator with MCT series transmitters.
Steel Nema 4 enclosure.
24 VAC input voltage.
2 N/O and one N/C relay
Commercial antenna Included (Radio029).

Programming Instructions - ECB Programming Instructions - CONT

MCT-2

Linear 2-btn MegaCode Visor Transmitter 318 MHz

Activates two 318MHz MegaCode receivers independently
Test/operate LED
Visor mounting clip supplied
Power: 9-volt battery incl.
Codes: 1000000+ (MegaCode format)
Dimensions: 2.16" W x 3.75" H x .95" D

.......more details

Programming Instructions

8833T-OCS

Allstar 3-btn 1-Door O/C/S Transmitter 109372 318 MHz *** To Extent of Inventory

Open/Close/Stop remote for 1 door
Compatible with 3-channel Allstar and MVP receivers
Portable transmitter
Easy access to battery and coding switch
Power: 9-volt battery
Codes: 6561 (set by eight trinary dip switches)

.......more details

Programming Instructions

HAE00002

Linear Safety Beam Set *** No Longer Available

Set includes: Sender and Receiver photocells wire and connectors
Safety beams will work with all Linear operators that currently have safety beams installed.