Devanco Canada - Get The Right Garage Door Opener‎ and Parts

180215

Decorative Hinge Apen-V3 Style 16" Stamped Steel Sold per piece

As seen on carriage house doors

MT-2B

Linear 2-btn MegaCode Block Coded Transmitter 318 MHz

Compatible with all Linear access receivers and controllers
Superior transmission range
Operate LED
Visor clip included
Sold in lots of 10
Power: 9-volt battery

.......more details

SL595105UL

LiftMaster Industrial Slide Gate OP. 1 HP 575V 3PH with Heater and LMRRUL ***NLA

3 Phase: 575V is a discrete model without field-selectable voltage.
Includes factory installed heater kit.
P3 MOTOR® High starting torque continuous-duty motor.
OPERATOR DUTY RATING: 25 cycles per hour.
METAL FRAME: 7-gauge pre-galvanized steel.
WORM GEAR REDUCTION: 20:1 worm gear reducer.

.......more details

MG020-B-2E-06

Miller Edge Sensing Edge Black 2-Wire End Outlet 6ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

41A2825

LiftMaster Opener Assembly Hardware Kit

Kit includes screws for various residential chain drive models

SLR-221

Linear Residential Slide Gate Op. 1/2HP 230V 1 Ph - Cold Weather Package NOT Included

Integral entrapment sensing system with digital set point for quick accurate adjustment and enhanced safety
Continuous-tone entrapment alarm with reset button
LED diagnostic display for ease of setup and troubleshooting
Selectable pre-start and run alarm with provision for ADA compliant visual pre-start and run alarm
Regulated 24 Volt DC power available for access control accessories
Integrated maximum run and auto close timer (0-9 minutes)

.......more details

CP-ARM-OLD

Lynx Auto Re-Connect Carriage Arms Only New Style 20-1/2" *** Discontinued

Arms only for CP-CRG-OLD

AKR-1

Linear Exterior Digital Keypad with Radio (ACP00747) *** NLA

Self-contained keyless entry system ideal for airports hospitals warehouses office buildings parking lots and many other commercial facilities
Built-in radio receiver
Rugged cast aluminum enclosure for indoor or outdoor mounting on a wall or pedestal
Four independent outputs and timers: two form C relays and two solid-state open collector outputs with unique programming per entry code
Accepts 480 entry codes 480 block code transmitters plus one fully supervised Model MGT safety edge transmitter
Two LED indicators show system status

.......more details

5001-18-CHARCOA

Residential Side & Top Weather-Strip 18' Long - Charcoal

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.
Sold by full case quantity (20)

60-7238

Wheel Chock Tie Back Chain 15 ft Long 3/16" Galvanized w/ Quick Links

One tie back chain only

24-230-5

Relay 3 PDT 230V 7A

208/230VAC relay
Used in BG770 gate operators

POCKETWHEEL007

Manaras Pocketwheel Assembly with rollers and clips (Hoist-A-Matic)

Includes POCKETWHEEL005 CAM012 and CLIP020

3-26-1

Half Hinge Type S Service Type Door ** Available to Extent of Inventory

Half hinge type "S"
16-gauge

CS303-DB50

EMX Car Sense Direct Burial Sensor with 50 ft Lead Wire ** Replaced by the LRS-DB-50

Can be used for above ground applications ie.. strapped to a post or wall
Easy low cost installation
Small size of the detector allow for easy installation in pavement
Rugged sensor is also suitable for above grade installations
Includes direct burial sensor and 50 ft of lead wire
Advanced 3-axis technology for better detection

.......more details

1003-4-DF-CUT

Bottom U-Rubber 4" Dual Fin Black Sold per Foot

Sold in cut lengths per foot.
Dual fin

HBS2UD

Stainless Steel Bottom Fixture 1-5/8"-2" Door 2-3" Track Double End Stile Sold per Pair *Includes (1) Right and (1) Left Bracket (4) U-Brackets) (2) Clevis Pins (2) Cotter Pins*

Manufactured with Heavy Duty 12 ga. Rust-Proof 304 Stainless Steel
Laser Cut for a Clean Finish
For 1-5/8"-2" Doors
Fits 2" or 3" Track
Double End Stile
Pins and Cotters

.......more details

02-108

Push Button Station 3-btn O/C/S Flush Mount Stainless Steel Faceplate

Nema 1
Standard 2X4 electrical junction box with stainless steel faceplate
OPEN/CLOSE/STOP allows complete control of the door

FL-T50

FL-Heddolf 1-Button Dip Switch Remote FL 311MHz *** Discontinued.

ID220-1KA Heddolf remote
9V battery & metal clip included

37561R

Genie Belt and Bullet Assembly 7ft

For 7' Tall Doors Only
Fits the following models: IntelliG 1000 (3024) IntelliG 1200 (4024)
SilentMax 1000 (3042) SilentMax 1200 (4042)

104255

Allstar Clip only for 8833TC

Clip only

MC00012

Micanan Gear Reducer PRO-GOHD BHC 63 40:1 56C

DC2000SL

LiftMaster Power Backup *** Discontinued

Keeps traffic moving during a power outage
Opens the gate when power goes out to allow vehicles to enter or exit
When power is restored the gate will return to normal operation
Compatible with operators: SL3000UL

26966A

Genie Idler Pulley for Stealth Chain Drive

Fits Genie Stealth model
1/4” bore
Channel style rails

6X20SC50

Devanco Loop 6' x 20' Saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
Requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

105104

Linear Gate Safety Edge Transmitter

105104 is for adding obstacle sensing for motorized gates or barrier arms.
Using a safety edge transmitter is more economical and discrete than the traditional coiled cord connection method.
The transmitter mounts directly on the gate or barrier arm and wires to a standard exterior safety edge sensor.
Compatible with 310 MHz Stanley receivers and Model 109950 302850 and 309013 receivers.
Activates receiver for stop or reverse entrapment
No cables or coiled wires

.......more details

Installation Manual

SERVICE-6220

Industrial Duty Rolling Steel Non-Insulated Service Door

22 gauge
Max size: 18'4" max std. width 20'4" max std. height
Slate type: Curved
Finishes: Gray White Tan Brown or Galvanized
RAL Powder coat option in 188 colors

LA400DC-S

LiftMaster Residential 24VDC Linear Actuator Secondary Arm Only New Model

Secondary Arm Only for LA400
All new arms are backwards compatible with the previous model but the LiftMaster branding is different

Installation Manual Manuel d'Installation Sell Sheet

14-J

Rolling Steel 3" Flat Endlock

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks

.343-6-RH-C

Torsion Spring .343 x 6" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .343 ID: 6" Length: 12 ft

.343-2-5/8-RH-C

Torsion Spring .343 x 2-5/8" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .343 ID: 2-5/8" Length: 12 ft

.295-3-3/4-LH-C

Torsion Spring .295 x 3-3/4" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .295 ID: 3-3/4" Length: 12 ft

BK101/PR

Spring Anchor Bracket USA 8-Gauge sold as a pair

Universal spring anchor brackets - Residential/Commercial
Centerline adjustment: 3-5/16" to 6-3/4"
Bright zinc plated 8 gauge steel
No bearing
Bearing R5110 sold separately

RN0029-SS

Roller 2" White Nylon 9" Stainless Steel Stem Double Sealed Bearing

A supreme double sealed bearing roller that never requires lubrication
Ideal for high usage and high moisture areas ie..carwash
7/16" stainless steel shaft.
200 lb load 50000 cycles

RN0024-SS

Roller 2" White Nylon 4-1/2" Stainless Steel Stem Double Sealed Bearing

A supreme double sealed bearing roller that never requires lubrication
Ideal for high usage and high moisture areas ie..carwash
7/16" stainless steel shaft.
200 lb load 50000 cycles
UHMW tire

510.3021.00

Whiting Stainless Steel Exterior Hardware Package with #77 Lock for Dry Freight Door

Optional package when a door is ordered. Includes SS rivets and installation.

Q223

LiftMaster Control Board Master / Second (K001A5869) *** Discontinued

Replacement control board for the Miracle-One gate operator with two arms - Master / Slave.
Same as part no. K001A5869

41A5434-13

LiftMaster Full Belt Assembly for 8ft Door

For belt drive models: 2500 2580 2280 3500 3280 3280M 3850 8355 2585 3585 2500B & D

71-EB3PH

LiftMaster Field Install Brake Kit 230/460V 3PH for L5 Operators Ext. Mount

For operators already in the field without a brake

Installation Manual

MX00147-OLD

Micanan Complete Clutch Kit for PRO-TB Old Style Frame

Before 2006
9" Diameter

MG020-Y-2E-04

Miller Edge Sensing Edge Yellow 2-Wire End Outlet 4ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

OPH-6114-ECB

Manaras Opera-H 1 HP 120V 1Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

Installation Manual Sell Sheet

VBELT_4L355

Doorlec VBelt 4L 35.5" *** NLA

Same as part number 19045

36254R

Genie T-Rail Carriage Assembly

This part is listed under several part numbers: 36254R.S 36197A 21784R 20438R
For all chain drive openers with steel T-rail assemblies
Must be installed with inner slide part # 25605R

19792B

Genie Replacement Door Bracket Zinc

Universal door bracket to connect door to door arm
Same as 19792A04

02-711

LiftMaster Nema 7/9 Ceiling Switch Pull Control

Single Pull Switch Control
Hazardous Area Overhead Mt. (NEMA 7/9)
Die cast hazardous area enclosure
May be used in two different ways; as an OPEN only control (all LiftMaster operators) or as an OPEN/CLOSE control (only LiftMaster operators with types B2 and S2 control wiring). In the latter case pulling the cord will open a fully closed door close a fully opened door and reverse a closing door.
Pulling the cord whlie the door is opening will either have no effect (type B2 wiring) or will stop the door (Solid State Logic Control Board).
WARNING: When used on most industrial operators this control will not stop the door. Use another control that has a STOP button in conjunction with this control.

.......more details

MD00017

Micanan Drive Sprocket 50B23 x 1" Bore 1/4" KW

MK-00002

Micanan Timer Module (2 wire)

T014

Manaras Trolley Track 14ft for 1/2HP models up-charge *Actual length 198"*

For models MLT/OTH/OTBH 1/2hp only with Chain #48 (#410)

AIRSWITCH008

Manaras Metal Case for AIRSWITCH007

1104-10FT-CHARC

Residential Side & Top PVC Weather-Strip with cap 10' Long - Charcoal (H)

Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

27-20112

Truck Door W-Style Spring Assembly Curbside 33" Long

Wire thickness: .182
Spring length: 33 inches long (assembled length)
Inside diameter: 1.188
Includes cable drum and bearing assembly winding cone wound onto spring for stronger desgn and internal spring spacer.

STATION081

Manaras Push Button Control Station 1-Button Nema 4/12

1-button 1 N/O contact
Plastic

SPREADER002

Chain Tensioner for 1" / 1-1/4"

Chain spreader for installation with 1" operator shaft and 1-1/4" door shaft
Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing

Installation instructions

MK-00493

Reversing Contactor Telemecanique 24V Coil (MK-01179)

Same as MK-01179

85LMC

LiftMaster Plug-In Power Supply

Plug-in jack for easy installation on Liftmaster receivers
Power input level: 105-135AC 24AC output

BEARING005

Manaras Flange Bearing ID 5/8"

Flange bearing for 5/8" shaft

108135.0004

Overhead Serpentine V- Belt for JST 31"

Overhead Door commercial garage door opener serpentine belt 108135-0004
Type "J" 31"

C-258-INSTALLED

Cones 2-5/8" Factory Installed (Pair)

For do-it-yourself installation use part no. SF258

ME112-L

Miller Edge Black 2W Non Monitored LH Outlet 1-5/16" wide x 1-1/2" high Sold by the Foot

Slide in edge designed for commercial sectional doors and gates.
Retrofits easily to 1" to 1-1/4" sectional doors
Touch sensitive signaling allows for immediate stopping/reversing of motion
For sectional doors: measure the daylight opening of the door or measure the panel width of the door
This gives you the "active length" of the edge - the length to order
Lead wire: 22 gauge univversal

.......more details

Installation Manual Worksheet Sell Sheet

.283_3-3/4"-LH

Torsion Spring .283 x 3-3/4" x 12ft LH White

Wire size: .283
Inside diameter: 3-3/4"
Length: 12 ft

.234_1-3/4"-RH

Torsion Spring .234 x 1-3/4" x 12ft RH Blue/White

Wire size: .234
Inside diameter: 1-3/4"
Length: 12 ft

41A5281

LiftMaster Extension Brackets for Snappy Sensors

Brackets used with Snappy Sensors 41A5034
For use with with 41A5266-1

218014-02

Lamp Socket Assembly

For models LSO LCO LDO

4005-8FT

Aluminum Retainer only for Heavy Brush 8' Long 180 degree

For angle application (180 degree)
For use with Heavy Brush

25-42-220

Extension Spring 7' Door - 220 lbs Green w/ clip

Double - Loop
25" long 42" stretch 220 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

27-20304

Truck Door Cable Drum and Bearing Curbside (RH) for Whiting Roll-Up Doors

Black nylon drum with bearing
Cable drums are grooved to prevent cables from binding or wearing prematurely.
Angle of cable slot determines Left or Right drum (Left = Red)
Cross Reference: 2548

26-14521

Truck Door Intermediate Panel (11" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

25E10051

Truck Door Center Hinge Black E-coat finish for Whiting Roll-Up Doors

Steel construction Black E-coat finish
Cross Reference: W #15 T #70159
Box quantity: 50

SF258

Spring Fitting 2-5/8" Pair

Universal thread for use in either LH or RH wound springs.
Pair includes: (1) winding & (1) stationary.
Maximum wire size diameter: .3310".
Set screw installed: 3/8"-16 x 1" (2).
Mounting: 1" tube or solid shaft - min. 1/2 turns on set screws.
Winding bar hole 1/2"

.......more details

EP2984

Exhaust Port 4" with latch long barrel ** Discontinued**

4" inside diameter 2" sleeve with latch.
Includes fasteners & gaskets.
Polished aluminum finish.

27-24202

Truck Door Single Torsion Spring Assembly 98/60 for Toco Roll-Up Doors

Single counterbalanced spring design available in 36" 48" and 60" spring lengths.
Shaft Length: 98" Spring Length: 60" Wire Size: .243
Quick and easy counterbalance spring adjustment with easy calibration to door size and weight for effortless operation.
Springs treated with rust preventative
Heavy .243 dia. spring wire
Heavy-duty cast aluminum cable drums hold up to 130" of cable

.......more details

RADIO-22

Manaras MT3-1000 3-btn transmitter 313 MHz

Open/Close remote for 2 doors
Comes with LED battery life indicator
9V battery included
Sunvisor clip included
To extent of inventory replaced by RADIO-EM903

Programming Instructions

MA013

LiftMaster Shear Pin #6 (Standard)

For barrier gate operator models: MADCBB MATDCBB MASDCBB & MASTDCBB
Use Shear Pin #7 ( MA0137 ) if hole shows sign of wear

LB410-14SF

Steel Faced Laminated Bumper Black 10" x 14" 4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

11-3503_ROD

LiftMaster Rod 1/2-13x64 Threaded Take-Up Bolt

Used on slide gate operators using #50 chain.
Also referred to as adjuster bolts

60-6560-A-YELLOW

Speed Bump Yellow 36" Econo Light Weight for Asphalt **** NLA

A standard speed bump system section includes (2) main pieces (2) endcaps x 5” long and (1) connector clip.
Main pieces may be added and connected to form larger units.
36” long x 10.5” wide x 2” high (main piece)
EndCap: 5” Safety Snap On End Cap - sloped modular profile prevents tripping by pedestrians.
Yellow Plates: Each speed bump section is embedded with (6) yellow safety plates of weather resistant composite material for protection from salt freeze and thaw.
Can be used as a cable cover - bottom sides include 1” x 1½” channels for protecting temporary or permanent cables or hoses.

.......more details

PLATE084

Manaras Plated Brake Plate for OSH

Plate only

JHDC22X4BMC

LiftMaster MAXUM Jackshaft 1.5 HP Heavy Duty 480V 3PH 60 Cycles/Hour 2200LB

New DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
Listed to ANSI/CAN/UL325 Standard for USA/Canada
Drive Type 65:1 Gearbox with #50 Chain Output
Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls

.......more details

PPK3PHM

LiftMaster Passport MAX 3-Button Keychain Remote w/Proximity Sensor

Compatible with the PPWR Receiver for gate access control all 315MHz Security+ LiftMaster and Elite Series Gate Openers and all LiftMaster Garage Door Openers manufacture since January 1995
3-button keychain remote with proximity sensor
2x the range of standard remote controls
Narrow-band transmission

OSHW-6112-M-N4-L

Manaras Opera-SH w/Carwash Mod 1/2HP 120V 1Ph Mon ECB w/N4 Photoeyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
Solenoid activated Brake

.......more details

BL229-L-SPP-5M

Automatic Systems Round Arm Left Sol 1 16'5" (5m)

Highly configurable barrier designed for many applications and environments
Numerous accessories offered allowing to meet various installation constraints and various requirements in terms of security
C/W BL229 Left Sol1 Round Arm 16'5 Safety Edge Red Arm Lights (2 sets of lights)

GAREX-24X12-WHTE

Garex Thermo Window Clear 24" x 12" White Frame

An original Garex window
Fits 1-3/4" thick door R16

IP-MDSF

CDVI Point of Entry Exterior Multi-Tenant Flush Mount Video Intercom System

Intercom system designed for multi-tenant residential and commercial properties providing video entry via IP with a free to download smartphone app.
Ideal for outdoor use on apartment buildings (up to 500 tenants) or commercial properties.
Features a 170 degree fisheye camera 5" touchscreen menu and integral dual technology card reader.
IP54 (recommended to be put under a canopy or covering)
Operating temperature: -10C to 50C
Stainless steel panel

.......more details

IP-SDS

CDVI Point of Entry Exterior Single Door Surface Mount Video Intercom System

Intercom system designed for single resident or commercial properties providing video entry via IP with a free to download smartphone app.
Ideal for outdoor use on single home or small business.
Up to 32 monitors can be connected to this device.
Pushing the button will call all monitors inside the building.
170 degree fisheye camera single-button and audible anninciation.
IP54 (recommended to be put under a canopy or covering)

.......more details

MODKIT027

Manaras Universal Aux. Output Module B060 Field Install

MODKIT027 for field install simply plugs into the control board
Controls several auxiliary devices such as Strobe horn fan lights etc
Works with BOARD060
Can only be used on operators with BOARD060 pre-installed for operators built prior to October 14 2010.

10BOX45RNDSM

4.5" Round Surface Mount Box

4.5 inch round surface-mount box for 4.5 inch round push plates.

TDC7-16

Liftmaster Comm. 16FT Trolley Angle set (10-5816-P x 2) and #48 chain pack (TDC48-16) ***Actual length 227"***

Double Angle Rails for doors up to 16'6" high
Includes #48 chain pack

PRO-EJ-5011-U

Micanan 1/2HP 115V 1P internal lock sensor Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

EMX-1915-1

EMX Single Grey Hood For IRB-MON2/4X2 1 Piece Only

Grey coloured metal hood (1 hood)

MOUNTSHAFT018A

Manaras Limit Shaft Kit MGH up to 1.5HP

For MGH MGT MGSL built from 2011 (Yellow C-Box) Limit chain size 410

PRX-320

EMX Keypad/Card Reader Waterproof 5402-1

Up to 2000 users by card
Up to eight user pass codes by keypad
Low energy consumption ideal for solar applications
Built-in contact for doorbell annunciator
CE certified and is also ROHS compliant
Key Confirmation: Green LED On while key is depressed

.......more details

DM54-COATED

Cable Drum High Lift 54" 5250-54 Specialty Coated Pair

54" High Lift aluminum die cast alloy.
3/8"-16x2" hardened cup point set screws installed with red heads.
Color coded: Red-LH and Black=RH.
Maximum High Lift: 54" Maximum Door Height: 180" + High Lift
Rated lift per drum: 500 lbs
Maximum cable diameter: 3/16"

.......more details

GDI-HB340

GDI Direct Drive & Jackshaft HAML-RBH-A830 Nema 4 To Accept 1" Shaft Non Monitored

Compact & Light Weight - Fast Installation
Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
Soft start soft stop

.......more details

2000D

Chain Hoist Direct Drive Assembly 2000 D

Sectional door Direct drive - 1" shaft
Requires keyed shaft
Includes: 2 shaft collars Chain Keeper 1/4" Square Key 2x set screws 5/16-18
Fits 5-1/4" min. offset
Includes 26' of chain
Ratio: 1:1

.......more details

1-0316

Richard-Wilcox 22 x 31 Track Bracket Double Zinc Plated

1/2" clearance needed between doors. Maximum door thickness of 2"
Weight: 3.5 lbs
Capacity: 400 lbs 500 lbs
Material: Formed Steel 3/16" thick

ME120-B-4E-P/FT

Miller Edge Sensing Edge Black 4-Wire Monitored End Outlet Sold per Foot

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

RS-55

Roller Shutter Aluminum Model 55 Made to Order Pricing by Quote Only

The RS-55 is designed for use in large window roller shutters door recesses and small shopfronts.
Robust construction ensures high profiles rigidity while maintaining a well-shaped proportional appearance.
The RS-55 profile is available with or without perforation in a wide range of RAL-like colours.
The profiles have a very good colour fastness and high resistance to abrasion.
This profile is resistant to weathering.
Aluminium profiles are ecologically clean products.

.......more details

ZAP-8825-3

Zap 8825 Series-3 1HP 115V Medium Duty Jackshaft Op

Compatible door sizes: Up to 240 sq. ft./1200 lbs.
Contains the motor two pulleys & one belt
Requires 7” side clearance & 3 ½” clearance above center spring shaft
Features include auto close timer cycle counter and service due reminder
Auxiliary capabilities include interior/exterior lighting wall controls swipe card devices dock equipment motion sensors alarm systems & more
Simple installation of motor assembly to spring shaft

.......more details