Devanco Canada - Get The Right Garage Door Opener‎ and Parts

41D9204

LiftMaster Wire Harness LED

Same as 041D9204

1013-1-1/4-18'

Rigid Vinyl Bottom Retainer L-Shaped 18' Long

For door thickness: 1-1/4"

MGR20-Y-2U-PER-FT

Miller Edge Sensing Edge Round Yellow 2-Wire Universal Outlet Sold Per Foot

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
Non-monitored edge
Maximum length is 10ft (over 8ft requires LTL shipment at additional cost)

K94-37871

LiftMaster Reset Switch and Harness SL595

For model SL595 slide gate operators

K180A0357

LiftMaster Reset Switch

Compatible with LiftMaster RSW12UL CSW24V swing gate operators
Switch to Reset/Disconnect position to disconnect the operator for manual operation
Switch to Normal Operation position to return to automatic gate operator functions
Dimensions: 3/4" L x 3/8" W x 2" H

K77-37853

LiftMaster Cover Assembly with Lock & Keys CSW24U

This is a made to order replacement part. Please allow extended lead time due to manufacturing and shipping for all made to order LiftMaster® parts

112357.0001

Overhead Logic Board for RSX 3/4 & 1HP 1PH

Fits OPRSXH75015BR GCL-H

4004-10FT

Aluminum Retainer only for Heavy Brush 10' Long 45 degree ** To extent of inventory

For angle application (45 degree)
For use with Heavy Brush

OPH-6212-ECB-LH

Manaras Opera-H 1/2HP 240V 1Ph with Electronic Circuit Board Left Hand

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"
25 cycles per hour 100 cycles per day

.......more details

515.06000R01

NICE Octagonal adaptor 60x(0.6/1) Wheel + Crown

K30-205-E

LiftMaster Boot Red

Also known as: 30-205-E 30205E
Replacement button cover for 02-406 station

0/7530/249

Automatic Systems 5/8 Left Hand Rod End with Zerk

Used on the BL229 gate op.

SF514U-114-W

Spring Fitting 5-1/4" Winding Side Only for 1-1/4" shaft

Universal thread for use in either LH or RH wound springs.
Includes: (1) winding side only

K75-37549

LiftMaster Disconnect Kit for SL595U

Compatible with LiftMaster SL595UL heavy-duty vehicular slide gate operators
Allows manual operation of your gate operator

H14G01-BLACK

Hinge #1 x 14 gauge Black Powder Coated

Black powder coated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 2-3/4" wide
Individually wrapped

2510-527

Linear Motor Drive Inverter Assy 2HP 230V 3P

For model VS-GSLG-723

GAL.262-258-144L

delete

41D8859

LiftMaster Cover 8550WL WLED

Burgundy Replacement Cover.
This one piece cover is compatible with various LiftMaster® Lock Capable Garage Door Openers Powered by myQ®; manufactured after 2017

MGH-6535-ECH-RH

Manaras 1.5 HP 600V 3P Jackshaft with Elect. Circuit Board Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

PRO-APTC-5081-U

Micanan 1/2HP 208V 1P Apartment Trolley Op. Photo Eyes Monitored ECB

Low clearance design for APT applications (8.5")
Door speed: 7" per second
N-4 Micanan compatible monitored photocells included
Monitored board
Side access hinged cover for easy access to controls
Three button open-close-stop control station Nema-1

.......more details

Installation manual

MOUNTSHAFT017

Manaras Clutch Shaft Kit for MTH MTBH (no pulley) Old Pre-1998

Input / clutch shaft kit for MTH MTBH
For old MTH MTBH with 1" diameter input shaft no pulley included

.437-6-R-C

Cut-to-Length Torsion Spring .437 x 6" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

.331-6-R-C

Cut-to-Length Torsion Spring .331 x 6" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones and filler sold seperately
For factory installed cones use part no. C-600-INSTALLED
For spring filler use part no. SPRING-FILLER

.331-514-R-C

Cut-to-Length Torsion Spring .331 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones and filler sold seperately
For factory installed cones use part no. C-514-INSTALLED
For spring filler use part no. SPRING-FILLER

.319-514-R-C

Cut-to-Length Torsion Spring .319 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch. Cones sold separatly.
For factory installed cones order part # C-514-Installed

.306-6-R-C

Cut-to-Length Torsion Spring .306 x 6" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

.295-134-R-C

Cut-to-Length Torsion Spring .295 x 1-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.283-134-R-C

Cut-to-Length Torsion Spring .283 x 1-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.283-134-L-C

Cut-to-Length Torsion Spring .283 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.262-334-R-C

Cut-to-Length Torsion Spring .262 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

.243-134-R-C

Cut-to-Length Torsion Spring .243 x 1-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.234-258-L-C

Cut-to-Length Torsion Spring .234 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.207-258-R-C

Cut-to-Length Torsion Spring .207 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

PRO-GH-5043U-L

Micanan 1/2HP 460V 3P Gearhead Operator N1 Eyes Monitored ECB Left Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PRO-GH-5081U-R

Micanan 1/2HP 208V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PRO-HB-7523U-RH

Micanan 3/4HP 230V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

PRO-HB-7521U-RH

Micanan 3/4HP 230V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

PRO-HB-7521U-LH

Micanan 3/4HP 230V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included

PRO-HB-5083U-RH

Micanan 1/2HP 208V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

MOTOR281

Manaras Electric Motor TEFC 1 HP 208/480V 3PH for N4/12 Applications

Electric motor only- not wired
Continuous duty base mount 56Z

PRO-H-7581-U-RH

Micanan 3/4HP 208V 1P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

PRO-H-5043-U-LH

Micanan 1/2HP 460V 3P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

MK-00703

Micanan Harness 1-Phase 5-Relay Board

MK-00679

Micanan Plastic Shoulder for Antenna Connector

MK-00137

Micanan Transformer 600V-24V-100VA

ME110-2W-BLK-R

Miller Edge 2-Wire Black Right Hand Outlet 7/8" wide x 3/4" high Sold by the Foot

Electromechanical slide in edge for counter shutters rolling doors and barrier arm applications.
Touch sensitive signaling that allows for immediate stopping and reversing of motion.
Temperature range -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet

PRO-J-10083-U-RH

Micanan 1HP 208V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

.363-514-R

Cut-to-Length Torsion Spring .362 x 5-1/4" Right Hand Wound Green/White

Priced per inch - cones sold separately
For factory installed cones use part no. C-514-INSTALLED

.406-334-R

Cut-to-Length Torsion Spring .406 x 3-3/4" Right Hand Wound Blue/Yellow

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-375-INSTALLED

.319-514-L

Cut-to-Length Torsion Spring .319 x 5-1/4" Left Hand Wound Blue/Green

Priced per inch. Cones sold separatly.
For factory installed cones order part # C-514-Installed

.312-258-R

Cut-to-Length Torsion Spring .312 x 2-5/8" Right Hand Wound Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.306-514-L

Cut-to-Length Torsion Spring .306 x 5-1/4" Left Hand Wound Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

.306-2-L

Cut-to-Length Torsion Spring .306 x 2" Left Hand Wound Red

Priced per inch
For factory installed cones priced seperately - use part no. C-200-INSTALLED

PRO-J-7581-U-RH

Micanan 3/4HP 208V 1P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

PRO-J-7581-U-LH

Micanan 3/4HP 208V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

PRO-J-5023-U-LH

Micanan 1/2HP 230V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

PRO-J-5083-U-LH

Micanan 1/2HP 208V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

PRO-GT-5081-U

Micanan 1/2HP 208V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

On-Board receiver holds up to 20 transmitters

PRO-APT-5083-U

Micanan 1/2HP 208V 3P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO ATPE)

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board
On-Board receiver holds up to 20 transmitters

BPPB1758

Garex Bottom PVC Moulding White for 1 3/4" Door U shaped 96"(8')

MM00022

Micanan Support U-Bracket H/HHD MSI0015

Fits PRO-H/HHD

MV-00133

Micanan Control Station 3-Btn O/C/S Nema 4 Surface Mount c/w Pilot Light 24V ** DISC..

LB1210-36

Laminated Bumper Standard Black 10" x 36" 12" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB912-12

Laminated Bumper Standard Black 12" x 12" 9" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TVB424-11SF

Steel-Faced Laminated Bumper Black 5 1/4" Projection Vertical Installation 24" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

10-10190

LiftMaster Brake Release Lever

Replacement lever for model SD

LB412-36SF

Steel Faced Laminated Bumper Black 12" x 36" 4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB410-24SF

Steel Faced Laminated Bumper Black 10" x 24" 4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TVB620-11SF

Steel-Faced Laminated Bumper Black 6 3/4" Projection Vertical Installation 20" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

HINGE-511-PCG

Powdercoated Hinge #5 x 11 gauge Grey ** To Extent of Inventory

Heavy Duty 11 gauge offset hinge #5 - 0.78 lbs
Powdercoated Grey
For use with 7/16" stem rollers

HINGE-111-PCG

Powdercoated Hinge #1 x 11 gauge Grey ** To Extent of Inventory

Heavy Duty 11 gauge offset hinge #1 - 0.61 lbs
Powdercoated Grey
For use with 7/16" stem rollers

K10-36183

LiftMaster Battery Tray for 33AH Batteries

For use with LA500

38877R.S

Genie Non-Configured Circuit Board

Replaces the following models: 38001R1.S 38001R2.S 38001R3.S 38001R4.S 38513R.S 38514R.S 37470R1.S 37470R2.S 37470R3.S 37470R4.S 38334R1.S 38334R2.S 38334R3.S 38334R4.S
Compatible with Series II Controls and comes with only the circuit board
In order for this kit to function properly it is important that customers know the model of their opener.
If unsure as to what resistor needs to be remove refer to the instructions that came with the unit

MD-00060

Sprocket 50B36 1-1/4" shaft 1/4" KW 2SS 5/16"

36 tooth sprocket for #50 chain

MD00001

Micanan Bevel Gear 20 Tooth 3/4" ID

Comes with keyway and 2 set screws
Used on PRO-GHCW

110956.0001

Overhead Brake Band Kit for RMX

Brake band kit for the Overhead Door RMX commercial operator.

OSH-6232-ECB-LH

Manaras Opera-SH 1/2 HP 208V 3 Ph with Electronic Circuit Board Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"

Installation Manual

VWS-34-BROWN

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Chocolate Brown

Pan head
S point

VWS-34-ZINC

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Zinc

Pan head

V5001-DARK-OAK

Replacement Vinyl Only for 5001-DOD Sold per Foot

.393-514-L

Cut-to-Length Torsion Spring .393 x 5-1/4" Left Hand Wound Orange

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-514-INSTALLED

126474-7K

Spring Failure Device For 1" Shaft RH & LH Assembly

Designed to reduce the risk of the door falling in the event of spring breakage
3-3/8" offset between wall and shaft (separate extension bracket available for offset of 4-3/8" up to 6")
For 1" shaft (1-1/4" shaft available for special order)
Fits 1-3/4"-6" Torsion Springs
One device per spring is required
Not for use with duplex springs

.......more details

7001-18-BRONZE

Commercial Side & Top Weather-Strip 18' Long - Bronze (BZ)

Bronze galvanized steel with bronze dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (10)

7001-14-BRONZE

Commercial Side & Top Weather-Strip 14' Long - Bronze (BZ)

Bronze galvanized steel with bronze dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (10)

7001-7-BRONZE

Commercial Side & Top Weather-Strip 7' Long - Bronze 7001-BZ (BZ)

Bronze galvanized steel with bronze dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (20)

5001-14-DK-BROWN

Residential Side & Top Weather-Strip 14' Long Commercial Brown

PVC wrapped
Painted aluminum retainer
Dual fin vinyl

RW-DOOR

Richards Wilcox Door Special Order

Special order as per customer's requirements

PRO-HBH-7583U-R

Micanan 3/4HP 208V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

3/4 HP208V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

PRO-HBH-7583U-L

Micanan 3/4HP 208V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

3/4 HP208V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

26CW945255-CUT

Truck Door Intermediate Panel (15.5" x Cut-to-Size ) Painted White for Whiting Dryfreight

These panels are cut to customer's exact measurements.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white