Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search 3
233817

Operator Reinforced Bracket 18-24" Adjustable with Hinge Kit Galvanized

  • Also known as ARB or ORB brackets
  • Kit includes: 5/16" Clevis Pin Hitch Pin 1/4-20x5/8" Carriage Bolt 1/4-20 Serrated Flange Nut
  • Hinge : Male Hinge 13 GA WIDE SD (MATERIAL STEEL 13 GA)
19-5010-SS

Roller Chain #50 Stainless Steel w/Connecting Link 10ft Length

JHDC12X1BMC

LiftMaster MAXUM Jackshaft 3/4HP 120/240V 1PH DC Operator 60 Cycles/Hour 1200LB

  • DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
  • Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
  • Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
  • Listed to ANSI/CAN/UL325 Standard for USA/Canada
  • Drive Type 65:1 Gearbox with #50 Chain Output
  • Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls
    • .......more details
JHDC_Installation-manualJHDC_Manuel-installationData sheetFiche techniqueQuick connect guideGuide de connexion rapideOrdering guideSprocket recommendation
TDC7-8

Liftmaster Comm. 8FT Trolley Angle set (10-5808-P x 2) and #48 chain pack (TDC48-08) ***Actual length 131*

  • Double Angle Rails for doors up to 8'6" high
  • Includes #48 chain pack
JDC7S1BMC

LiftMaster MAXUM Jackshaft DC Commercial Op. w/BBU 700LB **DISCONTINUED

  • Max door height: 40 ft. Max. Sectional doors up to 700 lbs. Rolling steel or insulated doors up to 450 lbs.
  • myQ Compatibility: Setup available for either myQ or myQ Facility
  • Operating Temperature: Without Heater: -4°F (-20°C) – 140°F (60°C). With Heater: -40°F (-40°C) – 140°F (60°C)
  • Heater sold seperately
  • Voltage: 120V/240V (1PH/3PH); 480V (3PH); 208V & 600V (3PH) available with transformer accessory
  • Motor Power: 24VDC
    • .......more details
JDC7S1BMC_Installation-manualJDC7S1BMC_Manuel-installationData sheetFiche TechniqueQuick connect guideGuide de connexion rapideOrdering guideSprocket recommendation
41176R

Genie Shaft Assembly Kit 6070/6170

200R

Chain Hoist Wall Mount 3:1 200R-41B36-1" Torque Force (244687)

  • Ratio 3:1
  • Sprocket: 41B36 Bore: 1"
  • Includes: 26ft of hand chain 1/4" square key chain keeper and 3.6ft of #41 roller chain included with sprocket wheels.
  • Pull load hand chain: 35 lb max
BEA-10-IXIO-ST

BEA Presence Sensor for Automatic Sliding Doors

  • IXIO-ST is an effective versatile and easy-to-use presence sensor for automatic sliding doors.
  • It can be used for both clear door openings and side-lite protection
  • Precise infrared curtains coupled with visible alignment beams make the IXIO-ST extremely safe and easy to adjust.
  • This state-of-the-art sensor features an on-board LCD screen that streamlines the installation and setup processes.
  • Intelligent Solution :On board microprocessor optimizes data analysis monitors sensor performance and enables system integration
  • Mounting height: 6’6” – 11’6”
    • .......more details
36350

Doorlec Reversing Time Delay 1.5 sec. 24VAC

  • In closing cycle door will stop for 1.5 seconds and reverse to fully open
7-6088

RW Hanger 321 For use with #31 Track

D-2-5

Keyed Disconnect Device 5ft Cable

  • Operated from the outside to disconnect the trolley for manual operation of the door
  • Must specify if keyed alike is required or keyed random will be shipped
  • Mounting plate dimensions: 2 1/2” x 1 3/32”
P-831RE

Pulsar 1-Door O/C/S Receiver 318 MHZ P-110554

  • Allstar compatible
  • Economy housing receiver
  • OPEN-CLOSE-STOP
  • 24V AC/DC
  • 8 dipswitches 318 MHz
Wiring-diagram
210-0053

TNR Doors CurtainLok Ass'y Kit UHMW-PE 5/pr per Kit (10pcs) ** Price by Quote Only

  • 5 complete curtainlok's with fasteners
  • Curtain Lok™ for 1/4” thick Rubber Doors
5415-2

EMX RAVEN Dual Relay Microwave Motion Sensor

  • Distinguish between vehicles and pedestrians
  • Two configurable relay outputs
  • Adjustable sensitivity and cross traffic suppression
  • 8-23 ft (2.5-7 m) mounting height
  • Optional remote control for easy programming
SBB-2-V3

2" Safety Bottom Bracket European 231721 Sold as a Pair Torque Force

  • Includes 1-Right hand and 1-Left hand
  • Zinc plated Steel
  • Max Door Weight: 1000 LBS
  • Cable attachment: Adjustable
  • Protective cover: Yes
  • Use with: Straight track 2"
    • .......more details
LJH-311-3/4

Doorlec 3/4HP 115V 1PH Jackshaft Operator

  • Nema 4/12 now included (11/2025)
Technical information
5009-801-PAINT

Aluminum Touch Up Paint Nail Polish Style White / Blanc #801

  • Glass bottle and brush applicator
SL595205UL

LiftMaster Industrial Slide Gate Operator 2 HP 575V 3PH with Heater - UL325 ***NLA

  • 3 Phase: 575V is a discrete model without field-selectable voltage.
  • Includes factory installed heater kit.
  • P3 MOTOR® high starting torque continuous-duty motor.
  • Operator Duty Rating: 25 cycles per hour.
  • Metal frame 7-gauge pre-galvanized steel.
  • Worm gear reduction 20:1 worm gear reducer.
    • .......more details
ALUM-5P2

Aluminum 24" x 100' Spool Rockwell Blue / Bleu Rockwell # 5P2

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 5P2
  • Reverse side is #431 Bright White
Colour chart
19-40240D

LiftMaster Drive Chain #40 10' Box Black Oxide

  • Complete kit includes: Drive Chain 10' (#40) and (2) Master Link Kits
  • Black Oxide coating provides corrosion resistance
  • Suitable for use exterior applications
K94-37694-2

LiftMaster Electric Motor 1 HP for SL585U(L)

  • Replacement motor for SL585101U
WA11

NICE Adjustable Stand for L & M BAR Gate Op

  • Adjustable stand for the barrier arms of the M-Bar & L-Bar barrier gate operators
  • Attaches to ground and provides support when arm is down
BK438/PR-USA

End Bearing Plate Flanged 11-GA 4-3/8" with Bearing. Commercial Sold as a pair

  • For commercial applications Used on wood jambs
  • Includes (1) RH and (1) LH plate with bearing
  • EBF438- USA Style
LA400-JB40

LiftMaster Junction Box w/Cable 40'

RN1124-10

Roller 2" Nylon 4" stem 11 ball White 10/PKG Sold per Pack

  • White Nylon Roller Wheel Diameter: 2"
  • Working Length: 3.75" Overall Length: 4.69"
  • Box qty: 15 packs of 10 Box weight: 49 lbs (2-4-11 White Nylon)
CHAIN059

Manaras #41 chain 48 Pitch (24" long)

  • Includes 1 chain link
CAP378

Capacitor 110/125VAC 378-454MFD

  • 378-454 mF 125 VAC 50/60 Hz
  • Used on 1/2 HP LiftMaster operators
50430-KEY

Doorlec PBS 2-Btn O/C and Key Switch On/Off Nema 4/12

  • Open / Close with On / Off Key Switch Nema 4/12
  • Green - Open Black - Close
Q210

LiftMaster Gear Box Kit #70 K75-50224

  • For use with various LiftMaster® Commercial Swing Gate Operators manufactured after 1997
K75-39337

LiftMaster Trolley Nut Kit LA500

  • The travel nut on LA500DC and LA500DCS gate operators may break when excessive force is applied to the gate such as being struck from a vehicle.
  • The travel nut can be identified as the white plastic nut that attaches to the internal lead screw of the arm.
  • The symptom of this problem is that the trolley assembly slides back and forth along the guide slots without mechanical restraint.
  • LiftMaster has created Trolley Service Kit K75-39337 with all the necessary parts and provides instructions on how to replace a damaged travel nut within an LA500 arm
Replacement instructionsInstructions de remplacement
02-410

LiftMaster Commercial Key Control Station Open-Close and Off with Stop Button

  • Outdoor Surface Mount Nema 4/12 station
  • Standard key cylinder
  • Open/Close spring return to center (off)
  • Key removable in center position only
  • With Stop button
MW-00057

Micanan Splash Proof Cover Light Duty Fully Assembled

  • Splash proof cover for models: PRO-LJ J LH LHA and GJ
  • Same as MP-00253
R1

Erone Radium 1-Channel Key Chain Transmitter 433MHz

  • Designed for the control of automatic closing systems and anti-burglar systems thanks to its very high security coding system (KeeLoq® Hopping code).
  • The code sent by the transmitter changes at each activation avoiding any scanning and copying risk.
  • A special algorithm allows to keep synchronized transmitter and receiver.
  • Range up to 250 m (820 ft)
  • Ergonomic rugged & durable
  • Battery: Two 3V lithium battery (CR2016)
    • .......more details
Wireless System Chart
H503L5-RH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 208/230-460V VAC 3 Ph Logic 5 Right Hand

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
K1D8388-1CC

LiftMaster Main Control Board Linear Actuators for UL325

  • This replacement board is compatible with the following models: LA500U LA400U LA412U
  • Same as 001D8388-1CC
  • Sticker on board references 001D9040-1CC
VWS-34-SANDSTONE

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Sandstone

  • Pan head
  • S point
ALUM-569

Aluminum 24" x 100' Spool Saddle Brown / Brun Fauve # 569

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 569
  • Reverse side is #431 Bright White
Colour chart
CB380500

Cable 3/8" 7x19 500' Galvanized

  • Galvanized Cable 3/8" 7x19 500ft spool.
  • Cable break strength: 14000 lbs
DS350

Heavy-Duty Commercial Non-Insulated Rollup Sheet Door with Interior Slide Locks

  • Heavy-duty Model DS-350 has statewide Florida product approval for wind load protection up to 190 mph.
  • This door is ideal for commercial applications with openings up to 16’ wide by 16’ high.
  • Heavy-duty 13-gauge guides attach to 8-gauge wall angles to give maximum wind load protection.
  • Installation to masonry or steel is quick and simple with no special preparation or overhead tracks needed.
  • A wide selection of colors to choose from
  • Made to Order
    • .......more details
19-41119M

LiftMaster Roller Chain #41 with Master Links 59-1/2" Long

  • Same as: 195105 19-41119MB 19-4119M 1941119M
16-8002

LiftMaster Cogged Vbelt 4L330

  • Fits BG790 barrier gate opener
60-5441

Standard LED Dock Light 40" Yellow DL40-PLED

  • Use 80% less energy than incandescent or halogen bulbs
  • LED bulb included
LVB420-11SF

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
510.PSKE.00

Whiting Penske Spec. Option

  • Options that are unique to the Penske fleet which include:
  • Side seals
  • Stainless steel rivets on roller hinges
  • Countersunk aluminum rivets on centre row of hinges
  • Galvanized scuff liner on inside of bottom panel
  • 12” pull strap on inside of door
    • .......more details
SSZP16-6-114

Solid Shaft 1-1/4" Keyed Zinc Plated 16'-6"

7812

Whiting Bottom Seal Truss Door White 90" Long

  • Fits Fed-Ex truck doors
.218-325-DS75

Mini Storage Spring for DS75 4x7 Door

  • Spring only with loop ends
757-325

Fasteners Lag Screw Hex Washer Regular Profile 5/16" x 1-5/8" 325/Bag KH

  • 7/16" head
  • Ideal for fastening tracks to the wall
C-24X12-134-W

Thermal Window 24" x 12" for 1-3/4" Cedo Door White

  • For 1-3/4" thick door
12123

Doorlec Coupling 1-3/4" x 5/8" bore 4 Pin coupler

  • Used on model LJH
27-24301

Truck Door Single Torsion Spring Assembly 89.5/48 for Todco Roll-Up Doors

  • Single counterbalanced spring design available in 36" 48" and 60" spring lengths.
  • Shaft Length: 89.50" Spring Length: 48" Wire Size: .243
  • Right hand wound
  • Quick and easy counterbalance spring adjustment with easy calibration to door size and weight for effortless operation.
  • Springs treated with rust preventative
  • Heavy .243 dia. spring wire
    • .......more details
K74-30754

LiftMaster Battery Harness 1 unit only

  • For LA400
  • 2 harnesses required per operator- 1 for each battery
FL-T50

FL-Heddolf 1-Button Dip Switch Remote FL 311MHz *** Discontinued.

  • ID220-1KA Heddolf remote
  • 9V battery & metal clip included
PS241F

Adjustable Regulated Power Supply with Optional BBU 6-24VDC 1AMP

  • 3 preset voltages: 6 12 and 24 VDC
  • Full adjustment from 2 to 24 VDC if required
  • Requires AC transformer for input power (minimum 14 VAC for 12 VDC output 26 VAC for 24 VDC output cannot be connected directly to 120 VAC)
  • Maximum 1 amp. Output at 70 deg. F and free air
  • Ripple: Minimum load: 0.007vrms Half load: 0.028vrms Maximum load: 0.057vrms
  • Regulation: 97.5%
    • .......more details
Wiring DiagramDiagramme de raccordementSpec SheetSpécifications
CLUTCH-ASY-MCJH

Lynx Complete Clutch Shaft Assembly for MCJH Operators 5/8" x 12-1/2"

CONTACTOR008

Reversing Contactor Struthers Dunn 115VAC

BIG-METRO-1PKG

NICE Big-Metro Single Arm Kit

  • For swing gates with leaves up to 5 m
  • Underground installation.
  • BM5024 Motor: Irreversible 24 Vdc with magnetic encoder complete with connecting lever and mechanical stop for the closing manoeuvre.
  • Compatible with 2 foundation metro boxes externally chamfered with mechanical stop on opening: in stainless steel (BMBOXI) ideal for use in extreme conditions and with the new cataphoresis paint finish (BMBOX) highly resistant to corrosion.
  • Maximum freedom of choice: release from inside or outside two key or lever operated models freely combinable and easy to operate with just one hand.
  • Recommended control unit: Moonclever MC824H Features: Simple programming by means of a single key;
    • .......more details
UNI-100-102

Uni-Size Bottom Weather Seal 10'2" Long *To extent of inventory*

  • Fits most standard doors 1-3/8" thru 2" thick
  • Pliable in all temperatures
  • Accepts pneumatic or electrical edge
  • 15 pieces per box
LD-11

EMX Base Socket 11-Pin DIN Rail Mountable Black (Was formally Grey)

  • For use with D-TEK detectors (most commonly used)
  • Hourglass shaped
MA116

LiftMaster 17 ft Aluminum Arm Round Yellow/Black Stripes ***NLA Repl. by MA116RDOT

  • Used on Mega Arm gate operators
  • Requires counterweight model MA117 - sold separately.
  • Size: 17 feet long x 3" round
  • Arm opening area: 14ft (end of cabinet to arm tip)
  • Replaced by MA116RDOT
MA001

LiftMaster MA & MAT Control Board (K79-60166)

  • Electronic board for barrier gate operator
  • Same as K79-60166
  • Can be used in various Autogate Operators
7550

Whiting Winding Cone for 2-5/8" ID Spring Wire Roadside (LH)

  • A Whiting original
CF-101-8

Commercial Side & Top Weather-Strip 8' Long Aluminum / Vinyl

  • Same as Garaga CF101
CPS-MEI

LiftMaster Electric Edge Card **to extent of inventory

  • The CPS-MEI is an interface for a monitored 2-wire edge that can be used in place of photo eyes and meets the monitored requirement of UL325-2010
  • Same as Miller Edge SM-102
MGR20-Y-2U-04

Miller Edge Sensing Edge Round Yellow 2-Wire Universal Outlet 4ft Long

  • Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates.
  • 3-sided activation allows for immediate stopping or reversing of motion
  • Contours to round or square posts.
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 6-8 PSI
    • .......more details
Installation ManualSell Sheet
APT501L5

LiftMaster 1/2HP 120/230V 1Phase Commercial Trolley Operator Logic 5 *** No Longer Available

  • APT-style operators employ an auto-reconnect trolley with nylon inserts and a resilient-mount motor for quiet operation.
  • Suspended from the ceiling the operators are used on sectional overhead doors with a standard lift.
  • APT operators are directly attached to drive and control the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
SG10-24RG-LED

TriLite Stop & Go Traffic Signal 24V LED Yellow Housing

  • Red and Green LED traffic light
  • Approx. size: 11-1/2" High x 6-1/2" Wide x 4" Deep
  • 24 volt DC input voltage only
  • Long lasting low power consumption
  • A simple reliable and cost-effective way to reduce accidents around the loading dock.
  • Available in two colors: safety yellow or black.
    • .......more details
Installation InstructionsInstructions d'installationWiring DiagramSchéma de connexion
69625

Marantec Programming Connector

  • Programming connector for use with M3 remotes and Wireless Keyless Entry. Also used with M13 Wireless Keyless Entry
M3-2314

Marantec 4-Button Transmitter 315 MHz 97244/122468

  • Same as part # 65893 and 97244
  • Visor mount
  • Includes battery CR2032
  • Made in Germany
Instructions
M3-2312

Marantec 2-Button Transmitter 315 MHz 97243/122436

  • Same as part # 65892 97243 122436
  • Includes battery CR2032
  • Made in Germany
Instructions
MDR-2

Linear 2-Channel MegaCode Receiver 318 MHz *** Discontinued

  • Activates two devices
  • Wire lead antenna
  • Mounting bracket supplied
  • Memory: storage for up to 10 MegaCode transmitters
  • Power: 24 VAC/VDC
  • Codes: 1000000+ (MegaCode format)
    • .......more details
Programming Instructions
MDR/U

Linear 1-Channel MegaCode Universal Plug-In Receiver 318 MHz

  • Makes any garage door operator compatible with MegaCode transmitters
  • Simple plug-in design
  • Easy to install - one connection using two-conductor wire
  • Memory: storage for up to 10 MegaCode transmitters
  • Normally open contact activates for 0.5 seconds
  • Power: 110 VAC +/- 10% 60 Hz
    • .......more details
195LM

LiftMaster Ceiling Mount ***Discontinued***

  • Designed to fit most standard garages
  • Black powder-coated finish hides wires and cords for a cleaner look
  • Mounts parallel or perpendicular to rail
  • Adjustable height to fit most ceilings
  • Hangs 6.5 to 24 inches down from ceiling
Installation ManualManuel d'InstallationSell SheetBrochure
50-105

LiftMaster Black Coil Cord 4-Wire 18-ga 20 ft. Extended Curly Cord

.250-2-L

Cut-to-Length Torsion Spring .250 x 2" Left Hand Wound Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
19-10929

LiftMaster Hoist Chain Sold by the Foot

  • and Chain for LiftMaster commercial hoist operators
485LMC

LiftMaster Battery for Integrated BBU Units

  • For use in Liftmaster 8550 8500W 3850 and 8360 models
  • 12V 4.5 AMP
  • Same as Part # 41A6357-1 41A5948
  • Battery back-up good for 20 cycles
Installation ManualManuel d'Installation
8FT-RAIL-BELT

LiftMaster 8' belt drive rail 2778BD - colour code: White

  • Price reflects cost if purchased with an opener
TUBE_SHAFT_10FT

Hollow Shaft 1" x 10'-10" Galvanized 16 gauge

  • When ordering order one foot longer that actual door width
R-831-J

FL-Allstar 1-Door O/C/S Receiver in Oil Tight Case (JIC) 107478-311 MHz **NLA

  • This receiver is included in a JIC box.
  • Like the model R-831-P it has three isolated contacts to open close and stop the doors and a possibility of 6 561 operational codes to enhance the security level. If your operator can be controlled by three button station then our R-831-J receiver and commercial remote controls will work with your operator.
  • Manufacturer's model number: 190-107478
  • Dimensions: 9 1/4" x 6 7/8" x 1 1/4".
Programming Instructions - Dip Switch VersionProgramming Instructions - Learn Button Version
41A5281

LiftMaster Extension Brackets for Snappy Sensors

  • Brackets used with Snappy Sensors 41A5034
  • For use with with 41A5266-1
373LMC

LiftMaster 3-btn Security+ Transmitter 315MHz

  • Visor clip and 3V lithium button cell (CR2032) battery included.
  • Same as Chamberlain model 953D
373LMC Manual
RADIO-14

Manaras MR-1000 1-Channel 24V Receiver 313 MHz ** Replaced by RADIO-RE900

  • Controls one operator with MT series transmitters.
  • Operates on 24VAC.
  • A LED indicates that the unit has been activated.
  • Can be installed directly onto the control box of a Manaras operator.
Installation Instructions
AP5

Linear MegaCode Wireless Access Controller 318 MHz

  • Ideal for gated communities parking facilities and industrial sites
  • Easy to set-up and use up to 480 remotes can be programmed with a few keystrokes
  • Easy to add suspend and delete transmitters through programming mode no transmitter dipswitches to set
  • Supports 480 block coded transmitters or 238 individual transmitters/wireless keypad entry codes
  • Supports up to six fully supervised safety edge transmitters
  • AP-5 replaces Linear's AP-4; AP-5 available for replacement of existing AP-4 units only
    • .......more details
Programming Instructions
639T

Allstar 3-btn 9-Door O/C/S Transmitter 107476 318 MHz ***Replaced by P-639T

  • Open/Close/Stop remote for 9 doors
  • Compatible with 3-channel Allstar and MVP receivers
  • Stationary mounting
  • Easy access to battery and coding switch
  • Power: 9-volt battery
  • Codes: 6561 (set by eight trinary dip switches)
    • .......more details
Programming Instructions
HAR-11

EMX Wiring Harness 11-Pin for D-TEK-MVP 5111-1

  • Universal 11-pin harness
300BH

3" Heavy Brush Insert 8ft Long

  • Polypropylene bristles
  • Same as model MS1712
1003-4"-200FT

Bottom U-Rubber 4" Black 200' Long

  • 200ft spool of vinyl insert.
28-30012

Truck Door 1" Vertical Track 93.5" for Todco Roll-Up Doors

  • Galvanized steel 14 gauge construction
  • For use with 1" diameter rollers
DM32

Cable Drum Standard Lift 32' 800-32 Pair

  • 32' Standard Lift aluminum die cast alloy for a 1" solid shaft. Pair includes: (1) LH and (1) RH. Color coded: Red=LH and Black=RH
  • Max. Door Height: 32'-1".
  • Rated Lift per Drum: 1000 lbs
  • Max. Cable Diameter: 1/4".
  • Mounting: 1" solid shaft with 1/4" keyway
  • Cross Reference: D800-384 DNS 402-32 OMI 2300
    • .......more details
HD8460-200

T-Handle Cable Lock System 2"

  • Complete cable locking system for a 2" door.
  • System includes: Auto Latch Striker Keeper T-Handle keyed with 4-1/4" shaft Inside release handle 3/32" cable and all required hardware.
  • Also works for for 1-3/4" doors
41A2817

LiftMaster Drive Gear and Worm Kit (No Sprocket)

  • Also known as: 081B0045 062216 081C0179 81B45 2612159
Installation ManualManuel d'Installation
25-10001

Truck Door End Hinge for Todco Roll-Up Doors

  • Zinc plated steel construction
  • Four-knuckled to ensure smooth door operation
  • Cross Reference: T #69035 W #4007 220000
CADROLL

3" Stainless Steel Carwash Roller 7" Stem ** To Extent of Inventory

  • Stainless Steel Shaft no bearing design
  • Roller made from NMW plastic which is more wear resistant that steel because it causes less friction
  • Rated for 200 000 cycles
  • Pound Load: 145 lbs
H11G03

Hinge #3 x 11 gauge

  • 11 gauge # 3 hinge - 0.72 lbs
  • Bright zinc-plated steel construction
  • For use with 7/16" stem rollers
DM54LC

Cable Drum High Lift 54" 400-54HL Pair

  • 54" LC High Lift-LD Aluminum die cast alloy.
  • 3/8"-16x2" hardened cup point set screws installed with red heads.
  • Color coded: Red-LH and Black=RH. Maximum High Lift: 54"
  • Maximum Door Height: 120" + High Lift
  • Rated lift per drum: 275 lbs 550 lb per door max
  • Maximum cable diameter: 5/32" max
    • .......more details
GHX-383-1HP-LH

Doorlec Explosion Proof Gear Head 1 HP 208V 3PH ECB Left Hand

  • Nema 7/9 control box
  • Electrical connections from motor to control box consists of hazardous location certified fittings and NEMA 7/9 O/C/S push-button station
10FT-BELT-LINEAR

Linear 10ft Belt Drive Rail for residential openers (HBT10C)

  • For use with Nice/Linear LDCO863B LDCO841 LDCO801 LCO75 LSO50 LDO50 and LDO33 garage door operators.
  • Fully-assembled and pre-tensioned 10-foot belt-drive T-rail
  • This “T-rail” can be converted to stronger “I-rail” with Nice/Linear’s bolt-on Carriage House Conversion Kit CHCR-10.
L991S

LiftMaster 1-btn Standard Visor Remote Control Sec+ 3.0

  • Compatible with LiftMaster® Security+ 3.0™ garage door openers.
  • Up to 1300 ft. range (conditions permitting).
  • New and improved seamless set up.
  • Control one Security+ 3.0 garage door opener.
  • NEW! Set up and manage your remote in the myQ app for a more personalized experience.
  • Ultra-secure encryption.
    • .......more details
Installation ManualManual d'installationCompatibility Chart 2025Comparison Chart 2025
BGARM14LED

LiftMaster TECHNA Barrier Gate Arm only 14ft with LED

  • Ships in manageable 6-foot sections for streamlined transport and storage enabling easy on-site assembly
  • Strong aluminum extrusion with reenforced male/female joining sections and fasteners for a secure fit
  • The arm features a bottom channel designed to hold BGARMFOAM thereby minimizing the chance of scratching the vehicle.
  • Compatible with the S50L a wireless edge safety device.
  • IP68 rated waterproof LED lights
  • Operating temperature: -25C - +60 C
    • .......more details
Installation ManualManual d'installation