Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login

GX-200-MG

Garex Ready to Install Door Multi-Grooved Special Order

  • 21" panel = 4 grooves 24" panel= 5 grooves
  • COMPLETE JOINT SEAL No air circulation between the panel sections eliminating thermal bridges.
  • Minimize the heat transfer between the inside and outside of your garage.
  • LIGHTWEIGHT AND ROBUST PANEL Polyurethane foam insulation pressure injected between the interior/exterior faces
  • WOOD END BLOCKS Suitable to receive steel end caps
  • HIGH-PERFORMANCE DESIGN Flexible rubber inserted into a PVC reinforced moulding offering a tightly sealed fit to the floor
  • Price by Quote Only
GALV-406-6-144-R

Torsion Spring .406 x 6" x 12ft RH Galvanized Blue/Yellow

  • Wire size: .406
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-295-258-144-R

Torsion Spring .295 x 2-5/8" x 12ft RH Galvanized Blue

  • Wire size: .295
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-283-334-144-L

Torsion Spring .283 x 3-3/4" x 12ft LH Galvanized White

  • Wire size: .283
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-283-258-144-L

Torsion Spring .283 x 2-5/8" x 12ft LH Galvanized White

  • Wire size: .283
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-273-2-144-L

Torsion Spring .273 x 2" x 12ft LH Galvanized Orange/Red

  • Wire size: .273
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-273-2-144-R

Torsion Spring .273 x 2" x 12ft RH Galvanized Orange/Red

  • Wire size: .273
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-243-334-144-R

Torsion Spring .243 x 3-3/4" x 12ft RH Galvanized White/Yellow

  • Wire size: .243
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
K77-50336

LiftMaster Washer and Nut Only for Traveler Carriage Q232

  • Compatible with various LiftMaster® Swing Gate Operators
GALV-375-6-144-LH

Torsion Spring .375 x 6" x 12ft LH Galvanized Yellow/Green

  • Wire size: .375
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized
GALV-225-258-144-L

Torsion Spring .225 x 2-5/8" x 12ft LH Galvanized Orange/Green

  • Wire size: .225
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized
GALV-363-334-144-L

Torsion Spring .363 x 3-3/4" x 12ft LH Galvanized Green/White

  • Wire size: .363
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
BEA-10-WBA

BEA Universal Mounting Bracket

  • Extendable from 15.35" - 23.62"
  • -90 to 90 degree tilt range
  • Self Drilling screws provided
  • Carbon Steel Black Powder Coated
CRBH755L5-RH

LiftMaster 3/4 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 with Carwash Modification

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
  • .......more details
RLC-K36

Miller Edge Light Curtain Non- Monitored 3ft NO/NC

  • Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
  • Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
  • Ideal for pre-2010 installations not requiring a monitored solution.
  • Ability to span up to 32' wide
  • Universal mounting brackets included
  • IP67 waterproof housing
  • .......more details
K07-8063

LiftMaster Upper Crank BG790

  • Also known as: 07-8063 078063 G078063
P-535T

Pulsar 3-btn 27-Door O/C/S Transmitter 318 MHz

  • Allstar compatible
  • Wall mount
  • OPEN-CLOSE-STOP 27 doors
  • 8 dipswitches 318 MHz
MK00697-UPCHARGE

Micanan Fraba Photocell UPCHARGE Nema 4/4X Supplied In Lieu of N1 Eyes

  • UPCHARGE only when replacing N1 eyes at time of purchase
  • Exterior Through-Beam Photocell
  • Sensing Distance 45 Feet
  • UL325/2010 Recognized Component
  • Comes with Sender Receiver and Brackets
  • NEMA 4 & 4X
  • .......more details
SAFEPACK-MOD

Doorlec Safepack 24V Control Circuit

  • A safepack module is used as an "Intrinsically Safe Barrier Relay" and in hazardous locations with non-voltage producing sensors allowing the user to use a N.O. non-monitored sensing edge.
LA500CONTUL

LiftMaster Standard 24VDC Control Box for Single and Dual Gate Applications Batteries Incl. UL325

  • Complete control box for new LA500U 2018 UL325 compliant
  • Includes box control board and batteries.
Q216

LiftMaster Output Shaft K07-50227 Swing Gate Op

  • Output shaft for #70 gear reducer
K22-35704

LiftMaster Brake Solenoid 208V

  • Used on all brands of commercial door and gate operators
  • 2 wire connection
236515

Wayne Dalton Res. Bottom Bracket Roller Holder LH

  • Compatible with Wayne Dalton 9100 9400 9600 9800 Foamcore II garage door models.
  • Pins & Cotters Included
  • Top quality galvanized steel
  • Dimensions: 4" Wide x 1.25" High x 1" side flange with milford pin
  • Sold as a single unit
050DCTBF

LiftMaster Receiver Logic Board Kit DC WiFi Bluetooth Enabled

  • 050DCTB is a Bluetooth Enabled Receiver Logic Board Replacement Kit.
  • For use with various LiftMaster® and Chamberlain® WiFi® DC Chain Drive and Belt Drive Garage Door Openers; powered by myQ®.
  • The unit will feature a yellow learn button.
  • Replaces 050DCTWF
  • Backwards compatible with 050DCTWF
  • Board: Tri-band Security+ 2.0l
  • .......more details
K204A0276

LiftMaster Transformer 50/60Hz 200va 575V

  • Transformer (575VAC 200VA). Compatible with LiftMaster® Models SL585U and SL595U Slide Gate Operators
  • 575V/200VA
  • Sturdy housing canopy
  • External winding micro-tabs
  • Reinforced fastener flanges
  • Compatible with LiftMaster SL585105U SL585151U slide gate operators
  • .......more details
LMLED1

LiftMaster LED Bulb 60W Equivalent 1/pkg

  • Designed to minimize radio frequency interference
  • Daylight white light output (5000K) ideal for garage use
  • 800 lumen / 60w equivalent
  • 22-year life
  • Durable: shatter-resistant and cold weather tested to -30° F /-34° C
DDO8900W

LiftMaster Light Duty Commercial Dock Door Jackshaft Op.

  • Ideal for commercial applications that require full vertical lift sectional doors with light-duty cycle requirements
  • Works with myQ® Business™ Facility to analyze and optimize productivity with intuitive control and monitoring capabilities.
  • LMi5 Interface monitors up to 5 external sensors enabling the DOCK DOOR SESSIONS feature in myQ business facility and visualization of productivity at the dock.
  • MyQ® Technology enables monitoring and control of the facility operators through a mobile app.
  • Built-In Wi-Fi® for simple operator internet connection.
  • Opens 50% faster in the up direction.
  • .......more details
746

Fasteners Ribbed Neck Track Bolt 5/16-18 x 3/4" Zinc 1000/box

Q076

LiftMaster Turn Buckle Kit K75-50132

  • For Liftmaster trolley operator HCT
K1D8424-1CC

LiftMaster Power Board 3 Ph SL585U/SL595U

  • For use with LiftMaster® SL585U & SL595U Series; and various 3 Phase Commercial Slide Gate Operator Models.
RBH105L5-RH

LiftMaster 1 HP 575 VAC 3 PH Comm. Hoist Op. Logic 5 Right Hand

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
  • .......more details
ESM500

Erone 1200lbs Exterior Maglock Surface Mount Stainless

  • Exterior applications & High-traffic areas
  • Power requirements: 12/24VDC
  • Current Draw: 500mA @ 12VDC 250mA @ 24VDC
  • Monitoring sensor
  • Visual feedback (red & green)
  • Optional L/Z bracket sold separately: LZE500
  • .......more details
30005

Doorlec Brake Solenoid 208V with wire leads

FLO1

NICE 1-btn Dip Switch Remote 433.92 MHz

  • Nice 1 Button 433.92MHz radio-control with programmable code - 1024 combinations.
  • Contains 10 DIP switches inside for coding.
  • Battery included: 12V (GP23A)
  • Dimensions: 72 x 15 x 40 mm
144B18

LiftMaster Idler Pulley 2" OD 1/2" Bore

  • 144B0018 is a idler pulley (2"OD 1/2"B) replacement kit. Compatible with Models ATS211 & ATS211R garage door openers. Check the manual for your specific model number before ordering.
  • Also known as: 144B0018 144B18
40W33A

LiftMaster Solar Kit 24V 33AH for Gate Operator

  • Charges the gate access system battery using solar power
  • Ideal for remote and sunny areas without access to an AC outlet
  • Replaces the need for gate access system transformer
  • Can be mounted to almost any fence gate or post
  • Mounting bracket and hardware included
  • Contains (2) SOLPNL20W12V solar panels
  • .......more details
IS40

BEA Industrial Sensor Dual Technology Presence Detection BEA-10IS40

  • Dual technology sensor combining presence and motion detection in industrial applications.
  • Bidirectional unidirectional approach and unidirectional depart microwave detection options. Six modes of detection filtering and 9 uniqueinfrared patterns for highliy flexible presence detection.
  • Up to 7 minimum object targets
  • Adjustable infrared immunity modes to mitigate environmental disturbances (vibrations light and sun)
  • Mounting height: 8'-16'
  • NEMA 4
  • .......more details
MA026

LiftMaster Pad Only Yellow For 12' Arm

  • Pad only - arm not included
DM120-T/FORCE

Cable Drum High Lift 120" D575-120-1 Pair Torque Force

  • 120" High Lift aluminum die cast alloy cable drums.
  • 3/8"-16 x 2" hardened cup point set screws installed with red heads.
  • Pair includes: (1) LH and (1) RH. Color coded: Red=LH and Black=RH.
  • Maximum high lift: 120".
  • Maximum door height: 144" + High Lift.
  • Rated lift per drum: 500 lbs.
  • .......more details
KPR2000

LiftMaster Wired Keypad and Proximity Reader

  • The KPR2000 supports a maximum of 2000 users in multiple access configurations (card only 4 to 6 digit PIN only or a combination of card and PIN).
  • Supports HID 26 and 30-bit Wiegand proximity card formats.
  • Designed for outdoor environments with a sealed weather proof design allowing you to easily mount anywhere.
  • Functions as a Stand-Alone Controller or in Pass-Through Mode (Wiegand Keypad Wiegand Proximity Credentials ASCII Keypad).
  • Latch Mode allows you to hold open a door or gate for an extended period of time.
  • Rapid Programming and Block Enrollment capability “Add” and “Delete” program cards included.
  • .......more details
47DCT

LiftMaster Receiver Logic Board Sec+2.0 Non-MyQ

  • 047DCT is a replacement Security+ 2.0® receiver logic board.
  • This replacement board does not feature MyQ® technology.
  • This 315MHz receiver logic board is compatible with various LiftMaster® AC chain drive and belt drive garage door openers; made after 2011.
  • The unit will feature a yellow learn button.
  • Same as 47DCCR1 47DCCC1 47DCCL1 047DCT41D8060 1D8060
MA116RDOT

LiftMaster White Aluminum Arm with Retro-Reflective DOT Tape 17 ft

  • For use on Mega-Arm gate operator
  • Red White reflective DOT stripe
GAREX-DOORFACE

Garex Special Order Door Face Only

  • Ordered to the customer's exact requirements
41ASWG-0014SA

LiftMaster Rear Connector

  • Used on LA400 LA412 LA412-S
25-10105

Truck Door 1" Steel Roller 3.25" Shaft Length for Todco Roll-Up Doors

  • Zinc plated Hardened shaft and raceways
  • Seven roller ball design
41D7742-5

LiftMaster Travel Module Kit 3/4 Hp

  • A one piece travel module replacement kit.
  • Compatible with 3/4HP LiftMaster® Models 8557 & 8587 and various AC chain and belt drive garage door openers
  • Same as 041D7742-5
009145

Allstar Rear Idler Sprocket *** No Longer Available

  • Allstar Allister Rear Idler Sprocket new # 009145 replaces X145
  • for Allstar/Allister models including ARD-II A Access 200/250 Access 2000/2500 Access 3000/3500 PDQ and Allister Century Series 310/510/710
1A4324

LiftMaster Steel Angle Hood Mount Bracket

  • Heavy-gauge steel bracket used for vertical or horizontal mount for either front or top of coil mount.
  • May be welded.
  • For use with LiftMaster Model DJ DH MGJ GH J and H.
  • Cannot be used with Model GH 3HP.
BEA-10-FALCON

BEA Falcon Motion Detector Mount over 11'5"

  • Motion sensor with microwave activationsolution for industrial indoor and outdoor use.
  • Ideal for automatic industrial doors vehicle gates and detection and loading docks.
  • Sensor also has the ability to differentiate between pedstrians and vehicles
  • Can be set vertically from 0 to 180 degrees
  • Mounting height between 11.5' and 23'
  • 12/24V AC/DC
  • .......more details
RBH101L5-RH

LiftMaster 1 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
  • .......more details
7001-9-CHARCOAL

Commercial Side & Top Weather-Strip 9' Long - Charcoal (H)

  • Charcoal galvanized steel with charcoal dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
41D0843

LiftMaster Replacement Motor and Sensor 12VDC

  • For Craftsman garage door opener
3-26-1

Half Hinge Type S Service Type Door ** Available to Extent of Inventory

  • Half hinge type "S"
  • 16-gauge
DM518-125

Cable Drum Standard Lift 18' D525-216-125 Pair Torque Force

  • 18' standard Lift aluminum die cast alloy.
  • Pair includes: (1) LH and (1) RH.
  • Color coded: Red=LH and Black=RH
  • Max. Door Height: 18'-1" Rated Lift per Drum: 750 lbs.
  • Max. Cable Diameter: 3/16".
  • Mounting: 1-1/4" solid shaft with 1/4" keyway
  • .......more details
.393-6-R

Cut-to-Length Torsion Spring .393 x 6" Right Hand Wound Orange

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.306-6-R

Cut-to-Length Torsion Spring .306 x 6" Right Hand Wound Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.306-6-L

Cut-to-Length Torsion Spring .306 x 6" Left Hand Wound Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
Z9205

Door Scale Arm

  • Counter balance lever arm and a common bathroom scale will allow you to weigh a door up to 1250lbs
  • Set door on shaft and multiply scale reading times 5 to give you the door weight
  • Bathroom scale not included
MK00643

Micanan Auxiliary Apt. Circuit Board for Red/Green Light Feature 115V Models Field Install

  • Auxiliary device logic board
  • Controls red/green lights
  • Provides Normally Open dry contacts for fully open or close positions
  • Normally Open dry conatcs for door opening or door closing cycle
  • Works on circuit boards: MK00641 MK00642 MK00701
  • Includes installation hardware
  • .......more details
1005-2-8'

Aluminum Bottom Retainer U-Shaped 8' Long**Actual Length 8'1"**

  • For door thickness 2"
CB18B0500-KOR

Cable 1/8" 7x19 500' Galvanized Supreme

  • Galvanized Cable 1/8" 7x19 500ft spool.
  • Cable break strength: 2000 lbs
  • A higher quality cable compared to the Chinese cable.
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
17-10336

LiftMaster Pulley 7.000"OD 3/4" Bore 4L-Belt

27-48-220

Extension Spring 8' Door - 220 lbs Green with clip

  • Single - Loop
  • 27" long 48" stretch 220 lb load
  • Sold individually
  • Rated for 10000 cycles
D400-144-1

Cable Drum Standard Lift 12' Torque Force Pair

  • 12 ft Standard lift cable drum. Aluminum die cast alloy.
  • Max. door height: 12'-1".
  • Rated lift per drum: 375 lbs.
  • Max. cable diameter: 5/32".
  • Mounting: 1" tube or solid shaft with 1/4" keyway.
  • Cross references: DM413 DNS 4-13 OMI 2100.
  • .......more details
41A5434-13

LiftMaster Full Belt Assembly for 8ft Door

  • For belt drive models: 2500 2580 2280 3500 3280 3280M 3850 8355 2585 3585 2500B & D
BK314

Jamb bracket J-14 #14 12 gauge

  • Sold by the piece
  • Height 5.50" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
02-711

LiftMaster Nema 7/9 Ceiling Switch Pull Control

  • Single Pull Switch Control
  • Hazardous Area Overhead Mt. (NEMA 7/9)
  • Die cast hazardous area enclosure
  • May be used in two different ways; as an OPEN only control (all LiftMaster operators) or as an OPEN/CLOSE control (only LiftMaster operators with types B2 and S2 control wiring). In the latter case pulling the cord will open a fully closed door close a fully opened door and reverse a closing door.
  • Pulling the cord whlie the door is opening will either have no effect (type B2 wiring) or will stop the door (Solid State Logic Control Board).
  • WARNING: When used on most industrial operators this control will not stop the door. Use another control that has a STOP button in conjunction with this control.
  • .......more details
19-5812

LiftMaster Trolley Chain Pack #48 for 12ft Door

  • Chain pack only
19-5814

LiftMaster Trolley Chain Pack #48 for 14ft Door

  • Chain pack only
K74-34582-1

LiftMaster Plastic E-Box Assembly for LA500CONT

  • Plastic replacement box only
19-48047M

LiftMaster Roller Chain #48x47

  • #48 x 47 pitch with master link
  • Internal reduction chain
  • Length is 24"
190LM

LiftMaster Adjustable Door Bracket 30/box ** No Longer Available **

  • This versatile product is designed to help lift garage doors in a wide range of sizes and is available to order in bulk packaging.
  • With 30 brackets in one low-priced box this product offers a cost-effective solution for dealers who want all their garage door solutions in one single order.
  • Bulk case of 30 brackets
  • Adjustable for 18" - 24" door sections
  • Painted finish - white powder
BK150/PR

Residential Bottom Bracket BB-100 sold as a pair

  • For use with 2" rollers
  • Works on 1-3/8" 1-1/2" 1-3/4" and 2" doors
  • 13 gauge residential bottom bracket that secures to the bottom of the door allowing the cable to be attached to the door for lifting
  • Same as part number 263
306839

Bircher Hercules 2s Microwave Motion Sensor for Industrial Doors

  • Two completely independent programmable outputs for endless application scenarios
  • Highly flexible program settings utilizing both outputs are now easier to program
  • 23' (7 m) long cable for maximum installation flexibility
  • 6-wire cable using traditional wire colors & thicker wire gauge for easier installation
  • Pulse on exit feature
  • Differentiation between pedestrian and vehicle traffic
  • .......more details
41A7635

LiftMaster Transformer 100V

  • For model: 8550
50-104-2

LiftMaster Orange Coil Cord 3-Wire 18-ga 20 ft. Extended Curly Cord

C-134-INSTALLED

Cones 1-3/4" Factory Installed (Pair)

  • For do-it-yourself installation use part no. SF175
.243-134-L

Cut-to-Length Torsion Spring .243 x 1-3/4" Left Hand Wound White/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.234-134-R

Cut-to-Length Torsion Spring .234 x 1-3/4" Right Hand Wound Blue/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
CPS-UN4

LiftMaster Commercial Protector System Thru-Beam Eyes NEMA4

  • Waterproof photoeyes.
  • for direct connect to operators with Logic boards. L3 L4 L5
  • Receiving Eye - A: 50-50997 Sending Eye - A: 50-50998
  • These eyes will also work on the Micanan UL325 monitored operators
.243_1-3/4"-LH

Torsion Spring .243 x 1-3/4" x 12ft LH White/Yellow

  • Wire size: .243
  • Inside diameter: 1-3/4"
  • Length: 12 ft
365LMC

LiftMaster Universal Plug-in Receiver 315 MHz

  • Compatible with any garage door opener with a simple 2-wire dry contact
  • Includes 2-conductor bell wire
  • Able to accept 8 Security+ transmitters & 1 digital keypad
  • Compatible remotes; 893MAX 890MAX 892LT 373LM 371LM 374UT 375UT
71-B120H

LiftMaster Interior Brake Kit with Cable 115V (Logic 3 4 and Models)

  • Interior mount brake kit for operation with chain hoist
  • Works on mechanical operators as well as logic 2 3 4 and early logic 5 motors.
24-24-2

LiftMaster Relay 24VAC 8-Pin DPDT

37500

Doorlec DC-2000 Electronic Circuit Board

  • Works in all Doorlec model openers except R-99
  • Input power to board is 120V
  • 24V DC available on terminals 9 & 11
  • Accessory power on terminals 1 & 11
  • 1 = Stop. 2 = Com. 3 = Open 4 = Close
CP-SW-MIC

Lynx Limit Switch for Commercial Operator with Logic Board

  • Single limit with curved actuator lever
  • Switch attaches directly to the Logic 6000 board
877LM

LiftMaster Sec+ 2.0 Keyless Entry

  • Features Security+2.0™ rolling code technology
  • One-button-to-close feature
  • Temporary password option
  • Program code directly from keypad
  • Backlit keypad
  • Includes 9V battery
  • .......more details
LIMIT025

Manaras Single Snap-Action Limit Switch with Flat Lever

  • Replacement for LIMIT001
  • For all Manaras commercial operators prior to 2000 - except light duty models
  • Can be used on Doorlec Lynx and others
  • Unimax (SPDT)
MH5011U-RH

LiftMaster 1/2 HP 120 Volt Medium Duty Jackshaft Operator

  • 1/2 HP 115 volt 1 phase medium-duty hoist operator
  • Logic board with integral 315 MHz radio receiver for Open/Close or Open/Stop/Close
  • CPSU commercial photoeyes included ( Nema 4 optional)
  • 4L V-Belt #48 drive chain adjustable friction clutch
  • Emergency disconnect and chain hoist standard
  • Solenoid actuated disc brake
  • .......more details
STATION079

3-btn Push-Button Control Station with Key Lock-Out Nema 4/12

  • 2 N/O contacts and 1 N/C contact for stop.
  • Surface mount.
  • Schneider Elect. part no. XALD04H7
300BL

3" Light Brush Insert 6ft Long

  • Polypropylene bristles
  • Same as model MS1705
4003-12FT

Aluminum Retainer only for Light Brush 12' Long 90 and 180 degree

  • For angle application (90 degree & 180 degree).
  • For use with Light Brush or Vinyl Insert.
1003-1-3/8-16'

Aluminum Bottom Retainer L-Shaped

  • For 1-3/8" thick doors.
25-42-100

Extension Spring 7' Door - 100 lbs Tan

  • Double - Loop
  • 25" long 42" stretch 100 lb load
  • Sold individually
  • Same as part number 111
  • Rated for 10000 cycles
91-00506

Truck Door U-Bolt 1-3/4" long

  • Zinc plated finish
  • Used to attach cables to Whiting doors
  • Cross Reference: W #70-5
R5210

Pulley 4" Zinc Plated Steel with Sheave Strap

  • Bored for 3/8" diameter bolt
  • Maximum cable diameter: 1/4"
  • Hardened inner race
  • Includes fork
MK-00005

Micanan Cut-Out Limit Switch

892LT

LiftMaster 2-btn Sec+ 2.0 Learning Transmitter

71-199010

LiftMaster 12' Sash Chain Pack with Keyring

  • Common disconnect chain
41A5807

LiftMaster Chain and Cable Kit 7' Door

  • This is a one piece 7 ft. Chain and Cable Replacement Kit